Publikationen pro Jahr
Publikationen pro Jahr
- 25 Ergebnisse
Suchergebnisse
-
2020
Numerical Simulation of Heat Treatment of Ti-6AI-4V by using a Phase-Field Method Based Software.
Titel in Übersetzung :NUMERISCHE SIMULATION DER WÄRMEBEHANDLUNG VON Ti-6Al-4V DURCH VERWENDUNG EINER PHASE-FIELD-METHODEN-BASIERTEN SOFTWARE Publikation: Konferenzbeitrag › Paper
-
2019
Calibration of Numerical and Determination of Physical Parameters for the Organic Model System TRIS-NPG
Titel in Übersetzung :Kalibrierung numerischer und Bestimmung physikalischer Parameter des organischen Modellsystems TRIS-NPG Publikation: Konferenzbeitrag › Paper
-
Diffusion-Reaction-Limited Mass Transfer on the Surface of an Electrically Conductive Droplet
Kharicha, A., Karimi Sibaki, E., Wu, M., Ludwig, A. & Bohacek, J., Juli 2019.Publikation: Konferenzbeitrag › Paper
-
Formation of micro-plumes at a planar solid liquid interface in a temperature gradient
Mogeritsch, J., Pfeifer, T. & Ludwig, A., 2019.Publikation: Konferenzbeitrag › Paper
1 Zitat (Scopus) -
Investigations on Collective Motion of Cathode Spots in the VAR Process
Kharicha, A., Karimi Sibaki, E., Wu, M. & Ludwig, A., 2019, S. 11-16.Publikation: Konferenzbeitrag › Paper › Begutachtung
-
Modeling Electrochemical Transport of Ions in the ESR Process
Karimi Sibaki, E., Kharicha, A., Wu, M., Ludwig, A. & Bohacek, J., 2019, S. 131-138.Publikation: Konferenzbeitrag › Paper › Begutachtung
-
Numerical Investigation of the Vacuum Arc Remelting (VAR) Process
Karimi Sibaki, E., Kharicha, A., Wu, M., Ludwig, A., Bohacek, J., Holzgruber, H., Ofner, B., Scheriau, A. & Kubin, M., 2019, S. 55-62.Publikation: Konferenzbeitrag › Paper › Begutachtung
-
On modelling parasitic solidification due to heat loss at submerged entry nozzle region of continuous casting mold
Vakhrushev, A., Kharicha, A., Ludwig, A., Nitzl, G., Tang, Y., Hackl, G. & Watzinger, J., 2019.Publikation: Konferenzbeitrag › Paper › Begutachtung
-
On modelling viscoplastic behaviour of the solidifying shell in the funnel-type continuous casting mold.
Vakhrushev, A., Kharicha, A., Ludwig, A., Tang, Y., Hackl, G., Watzinger, J. & Gomes Rodrigues, C., 2019.Publikation: Konferenzbeitrag › Paper › Begutachtung
-
Optimizing the flow conditions in the thin-slab casting mold using electromagnetic brake
Vakhrushev, A., Kharicha, A., Liu, Z., Wu, M., Ludwig, A., Nitzl, G., Tang, Y., Hackl, G. & Watzinger, J., 2019, S. 615-619.Publikation: Konferenzbeitrag › Paper › Begutachtung
1 Zitat (Scopus) -
Using a numerical model to study the transient clogging phenomena in SEN during continuous casting of steel
Wu, M., Barati, H., Kharicha, A. & Ludwig, A., 2019, S. 664-667.Publikation: Konferenzbeitrag › Paper › Begutachtung
-
2018
Concept of semi-continuous castin (SCC) for large steel strand: a numerical study.
Wu, M., Zheng, Y., Kharicha, A. & Ludwig, A., 2018.Publikation: Konferenzbeitrag › Paper › Begutachtung
-
Discussion on possible solidification during SEN clogging in steel continuous casting
Barati, H., Wu, M., Kharicha, A. & Ludwig, A., 2018.Publikation: Konferenzbeitrag › Paper › Begutachtung
-
Electro-vortical MHD Interface Instabilities
Kharicha, A., Karimi Sibaki, E., Wu, M. & Ludwig, A., Okt. 2018.Publikation: Konferenzbeitrag › Paper › Begutachtung
-
"Influence of nucleation and drednrite fragmentation on as-cast structure of Sn-10.0wt.Pb benchmark.
Zheng, Y., Kharicha, A. & Ludwig, A., 2018, S. 226. 231 S.Publikation: Konferenzbeitrag › Paper › Begutachtung
-
Investigation on Mesh Sensitivity of a Transiet Model for Nozzle Clogging
Barati, H., Wu, M., Kharicha, A. & Ludwig, A., 2018, S. 62. 66 S.Publikation: Konferenzbeitrag › Paper › Begutachtung
-
Investigation on the Binary Organic Components TRIS-NPG as Suitable Model Substances for Metal-Like Solidification
Mogeritsch, J. & Ludwig, A., 2 Sept. 2018, S. 330-335. 6 S.Publikation: Konferenzbeitrag › Paper › Begutachtung
-
Investigation on the Liquid Flow ahead of the Solidification Front During the Formation of Peritectic Layered Solidification Structure
Mogeritsch, J., Pfeifer, T., Stefan-Kharicha, M. & Ludwig, A., 2 Sept. 2018, S. 319-324. 6 S.Publikation: Konferenzbeitrag › Paper › Begutachtung
-
Numerical modeling of the MHD flow in continuous casting mold by two CFD platforms ANSYS Fluent and OpenFOAM
Vakhrushev, A., Wu, M., Kharicha, A. & Ludwig, A., 2018.Publikation: Konferenzbeitrag › Paper › Begutachtung
-
Numerical Modelling of Bubbly Flow in Continuous Casting Mold using Two Population Balance Approaches
Liu, Z., Vakhrushev, A., Wu, M., Ludwig, J., Li, B., Xu, G. & Ludwig, A., 2018, S. 1. 10 S.Publikation: Konferenzbeitrag › Paper › Begutachtung
-
Numerical simulation of fluid flow in the mushy zone under rotation magnetic field: Influence of Permeability
Zhang, H., Wu, M., Zheng, Y., Ludwig, A. & Kharicha, A., 2018.Publikation: Konferenzbeitrag › Paper › Begutachtung
-
2016
On the importance of modeling 3D shrinkage cavities for the prediction of macrosegregation in steel ingots
Ludwig, A., Wu, M. & Kharicha, A., 1 Jan. 2016, S. 3-10. 8 S.Publikation: Konferenzbeitrag › Paper › Begutachtung
-
Simulation of Turbulent Melt Flow and Deposition of Non-metallic Inclusions on Nozzle Wall of a Clogging Simulator
Barati, H., Wu, M., Kharicha, A. & Ludwig, A., 2016.Publikation: Konferenzbeitrag › Paper › Begutachtung
-
2015
A shallow layer model predicting the zinc film thickness during thecontinuous hot-dip galvanizing process
Kharicha, A., Pfeiler, C., Bohacek, J., Ludwig, A., Wu, M., Mogeritsch, J., Angelini, G. & Riener, C. K., 2015.Publikation: Konferenzbeitrag › Paper › Begutachtung
-
In-situ observation of the dynamic of peritectic coupled growth using the binary organic system TRIS-NPG
Mogeritsch, J. & Ludwig, A., 10 Nov. 2015, S. 012055. 12055 S.Publikation: Konferenzbeitrag › Paper › Begutachtung
Datei4 Zitate (Scopus)36 Downloads (Pure)