A Guide to Additive Manufacturing

Damir  Godec; Joamin Gonzalez-Gutierrez; Axel Nordin; Eujin Pei; Julia Urena Alcázar

A Guide to Additive Manufacturing

Titel in Übersetzung: Ein Leitfaden zur Additiven Fertigung

Damir Godec (Herausgeber)
, Joamin Gonzalez-Gutierrez (Herausgeber)
, Axel Nordin (Herausgeber)
, Eujin Pei (Herausgeber)
, Julia Urena Alcázar (Herausgeber)

Lehrstuhl für Kunststoffverarbeitung (350)

Metalworking, Furniture, Wood, Packaging and Related Technological Institute, AIDIMME
Universität Zagreb
Lund University
Brunel University

Publikation: Buch/Bericht › Sammelband › Forschung

926 Downloads (Pure)

Abstract

Project INEX-ADAM
Increasing Excellence in Advanced Additive Manufacturing (INEX-ADAM) is a
3-year European Union (EU) funded project to establish networking and synergy
among the five research institutions through identification, planning and implemen-
tation of Additive Manufacturing (AM) research tracks. The project is coordinated
by the University of Zagreb, Faculty of Mechanical Engineering and Naval Architec-
ture (UNIZAG FSB) and supported by Brunel University London (UBRUN), Lunds
Tekniska Högskola (LTH), Montanuniversität Leoben (MUL) and the Technology
Institute on Metal-Processing, Wood, Furniture, Packaging and related industries
(AIDIMME). The principle goal of this project is to widen the participation for
collaborative research among the consortium partners and support the coordinating
partner UNIZAG FSB with technical assistance and knowledge in the field of AM
research.
This book represents the main deliverable of the project and is a compilation
of the training materials for AM education which can be used for further teaching
purposes.

Titel in Übersetzung	Ein Leitfaden zur Additiven Fertigung
Originalsprache	Englisch
Verlag	Springer Cham
Seitenumfang	324
Band	1
Auflage	1
ISBN (elektronisch)	978-3-031-05863-9
ISBN (Print)	978-3-031-05862-2
Publikationsstatus	Veröffentlicht - 14 Sept. 2022

Publikationsreihe

Name	Springer Tracts in Additive Manufacturing
Herausgeber (Verlag)	Springer Cham
ISSN (Druck)	2730-9576
ISSN (elektronisch)	2730-9584

Bibliographische Notiz

ebook

UN SDGs

Dieser Output leistet einen Beitrag zu folgendem(n) Ziel(en) für nachhaltige Entwicklung

SDG 8 – Anständige Arbeitsbedingungen und wirtschaftliches Wachstum
SDG 9 – Industrie, Innovation und Infrastruktur
SDG 12 – Verantwortungsvoller Konsum und Produktion

Zugriff auf Dokument

A guide to additive manufacturingLizenz: CC BY

Andere Dateien und Links

https://link.springer.com/book/10.1007/978-3-031-05863-9

Dieses zitieren

@book{2f458712981a4ca3a89f587e9091754e,

title = "A Guide to Additive Manufacturing",

abstract = "Project INEX-ADAM Increasing Excellence in Advanced Additive Manufacturing (INEX-ADAM) is a 3-year European Union (EU) funded project to establish networking and synergy among the five research institutions through identification, planning and implemen- tation of Additive Manufacturing (AM) research tracks. The project is coordinated by the University of Zagreb, Faculty of Mechanical Engineering and Naval Architec- ture (UNIZAG FSB) and supported by Brunel University London (UBRUN), Lunds Tekniska H{\"o}gskola (LTH), Montanuniversit{\"a}t Leoben (MUL) and the Technology Institute on Metal-Processing, Wood, Furniture, Packaging and related industries (AIDIMME). The principle goal of this project is to widen the participation for collaborative research among the consortium partners and support the coordinating partner UNIZAG FSB with technical assistance and knowledge in the field of AM research. This book represents the main deliverable of the project and is a compilation of the training materials for AM education which can be used for further teaching purposes. ",

editor = "Damir Godec and Joamin Gonzalez-Gutierrez and Axel Nordin and Eujin Pei and Alc{\'a}zar, \{Julia Urena\}",

note = "ebook",

year = "2022",

month = sep,

day = "14",

language = "English",

isbn = "978-3-031-05862-2",

volume = "1",

series = "Springer Tracts in Additive Manufacturing",

publisher = "Springer Cham",

edition = "1",

}

TY - BOOK

T1 - A Guide to Additive Manufacturing

A2 - Godec, Damir

A2 - Gonzalez-Gutierrez, Joamin

A2 - Nordin, Axel

A2 - Pei, Eujin

A2 - Alcázar, Julia Urena

N1 - ebook

PY - 2022/9/14

Y1 - 2022/9/14

N2 - Project INEX-ADAM Increasing Excellence in Advanced Additive Manufacturing (INEX-ADAM) is a 3-year European Union (EU) funded project to establish networking and synergy among the five research institutions through identification, planning and implemen- tation of Additive Manufacturing (AM) research tracks. The project is coordinated by the University of Zagreb, Faculty of Mechanical Engineering and Naval Architec- ture (UNIZAG FSB) and supported by Brunel University London (UBRUN), Lunds Tekniska Högskola (LTH), Montanuniversität Leoben (MUL) and the Technology Institute on Metal-Processing, Wood, Furniture, Packaging and related industries (AIDIMME). The principle goal of this project is to widen the participation for collaborative research among the consortium partners and support the coordinating partner UNIZAG FSB with technical assistance and knowledge in the field of AM research. This book represents the main deliverable of the project and is a compilation of the training materials for AM education which can be used for further teaching purposes.

AB - Project INEX-ADAM Increasing Excellence in Advanced Additive Manufacturing (INEX-ADAM) is a 3-year European Union (EU) funded project to establish networking and synergy among the five research institutions through identification, planning and implemen- tation of Additive Manufacturing (AM) research tracks. The project is coordinated by the University of Zagreb, Faculty of Mechanical Engineering and Naval Architec- ture (UNIZAG FSB) and supported by Brunel University London (UBRUN), Lunds Tekniska Högskola (LTH), Montanuniversität Leoben (MUL) and the Technology Institute on Metal-Processing, Wood, Furniture, Packaging and related industries (AIDIMME). The principle goal of this project is to widen the participation for collaborative research among the consortium partners and support the coordinating partner UNIZAG FSB with technical assistance and knowledge in the field of AM research. This book represents the main deliverable of the project and is a compilation of the training materials for AM education which can be used for further teaching purposes.

UR - https://link.springer.com/book/10.1007/978-3-031-05863-9

M3 - Anthology

SN - 978-3-031-05862-2

VL - 1

T3 - Springer Tracts in Additive Manufacturing

BT - A Guide to Additive Manufacturing

PB - Springer Cham

ER -