A new ISO standard for the experimental characterization of in-plane permeability of fibrous reinforcements

David May; S. G. Advani; M. Duhovic; Andreas Endruweit; Ewald Fauster; Andrew George; P. J. Liotier; Cristian Lira; S. V. Lomov; M. F. Pucci; S. Schmeer; D. Abliz; David C. Berg; C. Binetruy; M. Bodaghi; S. Comas-Cardona; Matt Etchells; Q.  Govignon; Arjen  Koorevaar; V. Michaud; C. H. Park; R. Schubnel; P. Sousa; R. Ravel; M. Rouhi; E. Syerko; R. Umer; M. Vollmer; A. Yong

doi:10.1016/j.compositesa.2024.108592

A new ISO standard for the experimental characterization of in-plane permeability of fibrous reinforcements

David May, S. G. Advani, M. Duhovic, Andreas Endruweit, Ewald Fauster, Andrew George, P. J. Liotier, Cristian Lira, S. V. Lomov, M. F. Pucci, S. Schmeer, D. Abliz, David C. Berg, C. Binetruy, M. Bodaghi, S. Comas-Cardona, Matt Etchells, Q. Govignon, Arjen Koorevaar, V. MichaudC. H. Park, R. Schubnel, P. Sousa, R. Ravel, M. Rouhi, E. Syerko, R. Umer, M. Vollmer, A. Yong

Lehrstuhl für Verarbeitung von Verbundwerkstoffen und Design für Recycling (270)

Publikation: Beitrag in Fachzeitschrift › Artikel › Forschung › Begutachtung

Abstract

During Liquid Composite Molding, a fibrous reinforcement is impregnated with liquid resin. Process design requires
knowledge of the reinforcement permeability for fluid flow, but until recently, there has been no standard
available for its measurement. In 2023, following decades of benchmarking activities and a standardization
project, an ISO standard for the experimental characterization of in-plane permeability of fibrous reinforcements
for liquid composite molding was finally published. It focuses on the experimental characterization of unsaturated
in-plane permeability and specifies the requirements for test equipment, methods and data analysis. Given
the deficiency of standardized procedures within the composites industry, this paper intends to provide an
example of the steps towards standardization and summarizes lessons learned. It illustrates the research milestones
that led to the establishment of the standard, promotes the standard by detailing its general content and
notable features and finally gi

Originalsprache	Englisch
Aufsatznummer	108592
Seitenumfang	13
Fachzeitschrift	Composites Part A: Applied Science and Manufacturing
Jahrgang	190.2025
Ausgabenummer	March
DOIs	https://doi.org/10.1016/j.compositesa.2024.108592
Publikationsstatus	Veröffentlicht - 20 Nov. 2024

Schlagwörter

Fabrics/textiles
Permeability
Process Modeling
Resin transfer molding
Resin flow

Zugriff auf Dokument

10.1016/j.compositesa.2024.108592

Dieses zitieren

May, D., Advani, S. G., Duhovic, M., Endruweit, A., Fauster, E., George, A., Liotier, P. J., Lira, C., Lomov, S. V., Pucci, M. F., Schmeer, S., Abliz, D., Berg, D. C., Binetruy, C., Bodaghi, M., Comas-Cardona, S., Etchells, M., Govignon, Q., Koorevaar, A., ... Yong, A. (2024). A new ISO standard for the experimental characterization of in-plane permeability of fibrous reinforcements. Composites Part A: Applied Science and Manufacturing, 190.2025(March), Artikel 108592. https://doi.org/10.1016/j.compositesa.2024.108592

@article{d3072a904c664b7c9253761dc6eb33f5,

title = "A new ISO standard for the experimental characterization of in-plane permeability of fibrous reinforcements",

abstract = "During Liquid Composite Molding, a fibrous reinforcement is impregnated with liquid resin. Process design requires knowledge of the reinforcement permeability for fluid flow, but until recently, there has been no standard available for its measurement. In 2023, following decades of benchmarking activities and a standardization project, an ISO standard for the experimental characterization of in-plane permeability of fibrous reinforcements for liquid composite molding was finally published. It focuses on the experimental characterization of unsaturated in-plane permeability and specifies the requirements for test equipment, methods and data analysis. Given the deficiency of standardized procedures within the composites industry, this paper intends to provide an example of the steps towards standardization and summarizes lessons learned. It illustrates the research milestones that led to the establishment of the standard, promotes the standard by detailing its general content and notable features and finally gives explanations and reasoning behind the developed guidelines.",

keywords = "Fabrics/textiles, Permeability, Process Modeling, Resin transfer molding, Resin flow",

author = "David May and Advani, {S. G.} and M. Duhovic and Andreas Endruweit and Ewald Fauster and Andrew George and Liotier, {P. J.} and Cristian Lira and Lomov, {S. V.} and Pucci, {M. F.} and S. Schmeer and D. Abliz and Berg, {David C.} and C. Binetruy and M. Bodaghi and S. Comas-Cardona and Matt Etchells and Q. Govignon and Arjen Koorevaar and V. Michaud and Park, {C. H.} and R. Schubnel and P. Sousa and R. Ravel and M. Rouhi and E. Syerko and R. Umer and M. Vollmer and A. Yong",

year = "2024",

month = nov,

day = "20",

doi = "10.1016/j.compositesa.2024.108592",

language = "English",

volume = "190.2025",

journal = "Composites Part A: Applied Science and Manufacturing",

issn = "1359-835X",

publisher = "Elsevier Ltd",

number = "March",

}

May, D, Advani, SG, Duhovic, M, Endruweit, A, Fauster, E, George, A, Liotier, PJ, Lira, C, Lomov, SV, Pucci, MF, Schmeer, S, Abliz, D, Berg, DC, Binetruy, C, Bodaghi, M, Comas-Cardona, S, Etchells, M, Govignon, Q, Koorevaar, A, Michaud, V, Park, CH, Schubnel, R, Sousa, P, Ravel, R, Rouhi, M, Syerko, E, Umer, R, Vollmer, M & Yong, A 2024, 'A new ISO standard for the experimental characterization of in-plane permeability of fibrous reinforcements', Composites Part A: Applied Science and Manufacturing, Jg. 190.2025, Nr. March, 108592. https://doi.org/10.1016/j.compositesa.2024.108592

TY - JOUR

T1 - A new ISO standard for the experimental characterization of in-plane permeability of fibrous reinforcements

AU - May, David

AU - Advani, S. G.

AU - Duhovic, M.

AU - Endruweit, Andreas

AU - Fauster, Ewald

AU - George, Andrew

AU - Liotier, P. J.

AU - Lira, Cristian

AU - Lomov, S. V.

AU - Pucci, M. F.

AU - Schmeer, S.

AU - Abliz, D.

AU - Berg, David C.

AU - Binetruy, C.

AU - Bodaghi, M.

AU - Comas-Cardona, S.

AU - Etchells, Matt

AU - Govignon, Q.

AU - Koorevaar, Arjen

AU - Michaud, V.

AU - Park, C. H.

AU - Schubnel, R.

AU - Sousa, P.

AU - Ravel, R.

AU - Rouhi, M.

AU - Syerko, E.

AU - Umer, R.

AU - Vollmer, M.

AU - Yong, A.

PY - 2024/11/20

Y1 - 2024/11/20

N2 - During Liquid Composite Molding, a fibrous reinforcement is impregnated with liquid resin. Process design requires knowledge of the reinforcement permeability for fluid flow, but until recently, there has been no standard available for its measurement. In 2023, following decades of benchmarking activities and a standardization project, an ISO standard for the experimental characterization of in-plane permeability of fibrous reinforcements for liquid composite molding was finally published. It focuses on the experimental characterization of unsaturated in-plane permeability and specifies the requirements for test equipment, methods and data analysis. Given the deficiency of standardized procedures within the composites industry, this paper intends to provide an example of the steps towards standardization and summarizes lessons learned. It illustrates the research milestones that led to the establishment of the standard, promotes the standard by detailing its general content and notable features and finally gives explanations and reasoning behind the developed guidelines.

AB - During Liquid Composite Molding, a fibrous reinforcement is impregnated with liquid resin. Process design requires knowledge of the reinforcement permeability for fluid flow, but until recently, there has been no standard available for its measurement. In 2023, following decades of benchmarking activities and a standardization project, an ISO standard for the experimental characterization of in-plane permeability of fibrous reinforcements for liquid composite molding was finally published. It focuses on the experimental characterization of unsaturated in-plane permeability and specifies the requirements for test equipment, methods and data analysis. Given the deficiency of standardized procedures within the composites industry, this paper intends to provide an example of the steps towards standardization and summarizes lessons learned. It illustrates the research milestones that led to the establishment of the standard, promotes the standard by detailing its general content and notable features and finally gives explanations and reasoning behind the developed guidelines.

KW - Fabrics/textiles

KW - Permeability

KW - Process Modeling

KW - Resin transfer molding

KW - Resin flow

U2 - 10.1016/j.compositesa.2024.108592

DO - 10.1016/j.compositesa.2024.108592

M3 - Article

SN - 1359-835X

VL - 190.2025

JO - Composites Part A: Applied Science and Manufacturing

JF - Composites Part A: Applied Science and Manufacturing

IS - March

M1 - 108592

ER -