Changing morphological features in a semi-crystalline polymer in material-extrusion based additive manufacturing

Sandra Petersmann, Petra Spörk-Erdely, Michael Feuchter, Tom Wieme, Florian Arbeiter, Martin Spoerk

Publikation: Beitrag in Buch/Bericht/KonferenzbandBeitrag in Konferenzband

Abstract

Despite the high proportion of research activities in the field of material-extrusion based additive manufacturing, this technology still faces major challenges. In particular, when 3D printing with semi-crystalline polymers, a variety of process-related morphological and crystallographic changes can occur apart from general problems such as shrink-age and warpage. The complex relationships between the material, its processing and the final properties are still not fully understood. Hence, the influence of process-related orientations on the morphology and material properties of 3D-printed polypropylene (PP) was analysed by polarisation microscopy, wide-angle X-ray scattering, dynamic dif-ferential calorimetry, thermomechanical analysis, thermal conductivity measurements and "trouser tear" tests. By vary-ing two standard process parameters, four sample types with a completely different property portfolio with regard to morphology were generated. Low (200 °C and 2.25 mm/s) and high (250 °C and 22.5 mm/s) parameter settings for nozzle temperature and printing speed were investigated. Through in-depth analyses of four parameter sets, new in-sights into the formation of complex crystalline structures in 3D-printed semi-crystalline polymers are offered. It shows that minor changes of the printing parameters can have a great influence on the resulting material properties in different length scales. For example, for a high nozzle temperature in combination with a high printing speed layers with changing spherulite size were found. This finding could be correlated with the printing sequence of the slicer software, which confirms that the printing sequence proposed by the slicer software should not be chosen arbitrarily, but can be used to control the morphology and thus the mechanical properties of 3D-printed semi-crystalline poly-mers. Therefore, when handling semi-crystalline polymers such as PP, the characterisation of process-related morphological changes is particularly important and should never be neglected for future product developments.
OriginalspracheEnglisch
Titel Polymer Meeting 14
UntertitelBook of Abstracts
Redakteure/-innenChristian Slugovec, Gregor Trimmel
ErscheinungsortTU Graz
Seiten60
ISBN (elektronisch)978-3-85125-844-8
DOIs
PublikationsstatusVeröffentlicht - 30 Aug. 2021
VeranstaltungPolymer Meeting 14 - TU Graz, Graz, Österreich
Dauer: 30 Aug. 20212 Sept. 2021
https://www.tugraz.at/events/pm14
http://www.pm14.tugraz.at

Konferenz

KonferenzPolymer Meeting 14
Land/GebietÖsterreich
OrtGraz
Zeitraum30/08/212/09/21
Internetadresse
  • Polymer Meeting 14

    Sandra Petersmann (Redner/-in)

    30 Aug. 202121 Sept. 2021

    Aktivität: Teilnahme an oder Organisation einer VeranstaltungKonferenzteilnahme

Dieses zitieren