Evaluation of Cement-Casing & Cement-Rock Bond Integrity during Well Operations.

Publikation: KonferenzbeitragPaperBegutachtung

Abstract

This paper presents the results of laboratory static and dynamic tests on casing-cement-rock systems exposed to axial loads under ambient conditions. A new testing method has been developed.
The casing-cement-rock system mostly fails due to tension and shear stresses. In various applications such as HPHT, deep-water, (steam) injection or geothermal wells, the cement-casing bond is exposed to cyclic thermomechanical loads resulting in casing elongation, contraction, expansion and subsequently in cyclic radial and axial stresses at the cement-casing-rock system. Cement is a brittle material which can fail when subjected to repeated application of stresses lesser in magnitude than the statically determined strength. A novel atmospheric test cell has been designed and constructed. In order to achieve the fatigue limits of the cement-casing bond, a set of testing procedures has been established. Several tests are conducted to evaluate de-bonding. The focus on de-bonding is achieved by allowing the casing to move through the test while preventing any cement movement. Thus, when a force is applied in the axial z-direction - either the casing is pulled out (tension) or pushed down (compression) - the casing has enough space to move in both directions. The advantage of this testing method is that different stress ratios can be applied during the test.
OriginalspracheEnglisch
Seiten1-13
Seitenumfang13
PublikationsstatusVeröffentlicht - 27 Mai 2021

Dieses zitieren