Experimental und numerical investigations on cooling efficiency of Air-Mist nozzles on steel during continuous casting

Gregor Arth, Matthias Taferner, Christian Bernhard, Sebastian Christoph Michelic

Publikation: Beitrag in FachzeitschriftArtikelForschungBegutachtung

1 Zitat (Scopus)

Abstract

Cooling strategies in continuous casting of steel can vary from rapid cooling to slow cooling, mainly controlled by adjusting the amount of water sprayed onto the surface of the product. Inadequate adjustment however can lead to local surface undercooling or reheating, leading to surface and inner defects. This paper focuses on cooling efficiency of Air-Mist nozzles on casted steel and the experimental and numerical prediction of surface temperature distributions over the product width. The first part explains the determination of heat transfer coefficients (HTC) on laboratory scale, using a so called nozzle measuring stand (NMS). Based on measured water distributions and determined HTC's for air-mist nozzles using the NMS, surface temperatures are calculated by a transient 2D-model on a simple steel plate, explained in the second part of this paper. Simulations are carried out varying water impact density and spray water distribution, consequently influencing the local HTC distribution over the plate width. Furthermore, these results will be interpreted with regard to their consequence for surface and internal quality of the cast product. The results reveal the difficulty of correct adjustment of the amount of sprayed water, concurrent influencing water distribution and thus changing HTC distribution and surface temperature.
OriginalspracheEnglisch
Aufsatznummer012033
Seitenumfang9
FachzeitschriftIOP Conference Series: Materials Science and Engineering
Jahrgang143.2016
Ausgabenummer1
DOIs
PublikationsstatusVeröffentlicht - 10 Aug. 2016

Dieses zitieren