Flow-enhanced remelting of settling/floating globular crystals during mixed columnar-equiaxed solidification

Publikation: KonferenzbeitragPaperBegutachtung


Previously, the authors have used a mixed columnar-equiaxed solidification model, suc-
cessfully ‘reproduced’ the solidification benchmark experiments on the Sn-10wt.%Pb alloy under
natural/forced convections (travelling magnetic stirring) as performed at SIMAP laboratory [Int. J.
Heat Mass Transf. 85 (2015) 438-54]. The current contribution is to address the flow-effect on the
remelting of settling/floating crystals during the mixed columnar-equiaxed solidification. The re-
melting or growth is controlled by diffusion of solute in the liquid boundary layer. The diffusion
length due to the flow-effect is modelled as a function of Schmidt and Reynolds numbers. The mod-
elling results show that remelting rate of the floating/settling crystals, which originate from fragmen-
tation and then brought to the superheated region by the forced flow, can be enhanced by the flow.
In turn the released latent heat can reduce the temperature locally (even globally), hence to speed up
the solidification of the columnar structure. Additionally, the solidification-migration-remelting of
equiaxed grains present an important macrosegregation mechanism. By solidification of a crystal in
the cold region it rejects solute, while by remelting of the crystal it dilutes the surrounding melt.
These phenomena are found critical in many engineering castings with mixed columnar-equiaxed
PublikationsstatusVeröffentlicht - 2023
VeranstaltungMCWASP XVI IOP Conf. Series: Materials Science and Engineering -
Dauer: 18 Juni 202323 Juni 2023


KonferenzMCWASP XVI IOP Conf. Series: Materials Science and Engineering

Bibliographische Notiz

The authors acknowledge the financial support from the Austrian Research Promotion Agency (FFG)
through the project Bridge I (No. 868070) and the Austrian Science Fund in the framework of the FWF-
NKFIN joint project (FWF, I 4278-N36).

Dieses zitieren