Liquid composite molding reproducibility in real-world production of fiber reinforced polymeric composites: a review of challenges and solutions

Spiridon Konstantopoulos, Christian Hueber, Ioannis Antoniadis, John Summerscales, Ralf Schledjewski

Publikation: Beitrag in FachzeitschriftÜbersichtsartikelBegutachtung

11 Zitate (Scopus)

Abstract

Liquid composite molding (LCM) suffers from multiple factors that contribute to pronounced uncertainty of process characteristics. This results in compromised reproducibility which is associated to high scrap or the unpredictable behavior of approved parts. However, LCM is still attractive for Fiber-reinforced polymeric composites (FRPC) production due to its economic advantage (i.e. in relation to Autoclave), the capability of some of its variants to produce high performance parts and its potential for process optimization. This review analyzes each uncertainty with respect to its origins and its impact in part or process, based on a combination of past literature and original numerical results. The possible methods to counteract uncertainties are critically discussed, with an eye on both the scientific and feasibility (technical/economical) aspects. The overall aim is to provide to future LCM implementations a roadmap of the most critical challenges and solutions regarding the establishment of a reproducible process.
OriginalspracheEnglisch
Seiten (von - bis)85-99
Seitenumfang15
FachzeitschriftAdvanced Manufacturing: Polymer and Composites Science
Jahrgang5.2019
Ausgabenummer3
DOIs
PublikationsstatusElektronische Veröffentlichung vor Drucklegung. - 1 Juli 2019

Dieses zitieren