Montanuniversität

2023

Implementation of a material model under consideration of ageing in a commercial FEA software

Mohammad Aghaei, M., 2023

Research output: Thesis › Master's Thesis

Implementation of the Heterosegmental PC-SAFT Approach

Gessl, C., 2023

Research output: Thesis › Master's Thesis

Open Access

File

217 Downloads (Pure)

Implementation of thermo-responsive polymer coatings for an early warning against critical temperature states of thermo-sensitive electronic devices with metal oxide (MOx) gas sensors

Bautista-Anguís, D., Wolfberger, A., Rabe, M., Tomaszczyk, S. & Schlögl, S., 14 Feb 2023, (E-pub ahead of print) In: Progress in organic coatings. 178.2023, May, 11 p., 107444.

Research output: Contribution to journal › Article › Research › peer-review

Implementierung einer klinkerärmeren Zementsorte CEM II/B-M 42,5N mit getrennter Mahlung von Kalkstein

Translated title of the contribution: Implementation of a lower-clinker cement type CEM II/B-M 42,5N using separate grinding of limestoneErlacher, T., 2023

Research output: Thesis › Master's Thesis

Implementierung einer Regelung mit automatisierter Staupunktserkennung für eine Absorptionskolonne

Translated title of the contribution: Implementation of a control system with automated loading point detection for an absorption columnStocker, R., 2023

Research output: Thesis › Master's Thesis

Implementierung eines zentralen Data Acquisition Systems und Softwarelösung zur Datensynchronisation einer Induktionsprüfanlage

Translated title of the contribution: Implementation of a central Data Acquisition System and software solution for the data synchronization of an induction testing machineMüller, D. J., 2023

Research output: Thesis › Master's Thesis

Open Access

File

130 Downloads (Pure)

Implementing the Krafla Magma Testbed (KMT): linking volcanology and geothermal research for future hazard and energy solutions

Lavallee, Y., Mortensen, A., Papale, P., Eichelberger, J., Sigmundsson, F., Kennedy, B., Villeneuve, M. C., Jousset, P., Dingwell, D. B., Markusson, S., Eríksdóttir, V., Pálsson, B., Tester, J., Karlsdóttir, S. N., Midgley, J., Ingolfsson, H. P. & Ludden, J., 2023.

Research output: Contribution to conference › Abstract › peer-review

Improved nanoindentation methods for polymer based multilayer film cross-sections

Christoefl, P., Jakes, J. E., Geier, J., Pinter, G., Oreski, G., Stone, D. & Teichert, C., 2023, 2023 24th International Conference on Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Microsystems, EuroSimE 2023. Institute of Electrical and Electronics Engineers, (2023 24th International Conference on Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Microsystems, EuroSimE 2023).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

Improved Predictive Model for Surge/Swab Pressure Estimation using a New Simplified (NS) Model

Ridha, S., Khanbesh, S., Arain, A. H., Yusuf, M. & Krishna, S., 2023, 2023 International Conference on Digital Business and Technology Management, ICONDBTM 2023. Institute of Electrical and Electronics Engineers, (2023 International Conference on Digital Business and Technology Management, ICONDBTM 2023).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

Improved thermolytic dehydrogenation of LiBH4 nanoconfined in few-layer graphene with different functionalities

Guo, R-F., Hsu, C-Y., Kostoglou, N., Hinder, S. J., Baker, M., Mitterer, C., Rebholz, C. & Wang, C-Y., 2 Aug 2023, (E-pub ahead of print) In: Materials Today Sustainability. 24, 11 p., 100486.

Research output: Contribution to journal › Article › Research › peer-review

Improve the process of working with the approach DA: Disciplined Agile

Moghadami Nia, R., 2023

Research output: Thesis › Master's Thesis

Improving and degrading the oxygen exchange kinetics of La_0.6Sr_0.4CoO_3−δ by Sr decoration

Siebenhofer, M., Riedl, C., Nenning, A., Artner, W., Rameshan, C., Opitz, A. K., Fleig, J. & Kubicek, M., 13 Feb 2023, In: Journal of Materials Chemistry A. 11.2023, 24, p. 12827-12836 10 p.

Research output: Contribution to journal › Article › Research › peer-review

Open Access

Improving the electrochemical protection of the linear part of gas pipelines

Chernyshov, V., 2023

Research output: Thesis › Master's Thesis

Open Access

File

52 Downloads (Pure)

Improving the mechanical properties of metallic glasses through structure and stress engineering: A molecular dynamics simulations study

Yuan, X., 2023

Research output: Thesis › Doctoral Thesis

Open Access

File

206 Downloads (Pure)

Improving the stress corrosion resistance of 7075 matrix composites through combination of nanoparticle incorporation and retrogression re-aging treatment

Li, S., Wu, Y., Wang, W., Wang, X., Kang, H., Guo, E., LI, J., Xu, Y., Chen, Z. & Wang, T., Aug 2023, In: Materials Today Communications. 36.2023, August, 10 p., 106639.

Research output: Contribution to journal › Article › Research › peer-review

Impurities and tramp elements in steel: Thermodynamic aspects and the application to solidification processes

Bernhard, M. C., Park, W-B., Kang, Y-B., Ilie, S. & Bernhard, C., 13 Jun 2023, Proceedings of 6th ESTAD (European Steel Technology and Application Days) 2023.

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

Inbetriebnahme und Optimierung einer Direkt-Membrandestillationsanlage im galvanischen Goldbeschichtungsprozess von Leiterplatten

Translated title of the contribution: Commissioning and optimization of a direct membrane distillation plant in the galvanic gold plating process of printed circuit boardsKöck, P. A., 2023

Research output: Thesis › Master's Thesis

In-depth study of direct and derived acoustic emission parameters and their information content for classifying lubricated tribological sliding contacts

Strablegg, C., Summer, F., Renhart, P., Pusterhofer, M. & Grün, F., Dec 2023, In: Tribology International. 2023, Vol.190*December, 17 p., 109028.

Research output: Contribution to journal › Article › Research › peer-review

Open Access

Induced Seismicity: Analysis of fault rocks from the Vienna Basin

Pengg, A., 2023

Research output: Thesis › Master's Thesis

Industrial energy demand and GHG emission scenarios under changing technologies - an Austrian case study Abstract

Nagovnak, P. & Schützenhofer, C., 16 Feb 2023.

Research output: Contribution to conference › Paper › peer-review

Industry-oriented sample preparation with an in- ductively heated laboratory continuous casting plant for aluminum alloys

Weidinger, A., Samberger, S., Schmid, F., Stemper, L. & Pogatscher, S., 11 Jun 2023.

Research output: Contribution to conference › Paper › peer-review

Inferring material properties from FRP processes via sim-to-real learning

Stieber, S., Schröter, N., Fauster, E., Bender, M., Schiendorfer, A. & Reif, W., 27 Jul 2023, In: International Journal of Advanced Manufacturing Technology. 128.2023, September, p. 1517–1533 17 p.

Research output: Contribution to journal › Article › Research › peer-review

Open Access

Influence of Alkali Metal Oxides in Secondary Metallurgical Slags on the Behavior and Appearance of Non-Metallic Inclusions in Steel

Preißer, N., 2023

Research output: Thesis › Master's Thesis

Open Access

File

161 Downloads (Pure)

Influence of alloying elements (Cu, Mg, Ag) and hot rolling on the solidification microstructure, precipitation microstructure and hardness of an Al-Cu-Mg-Ag alloy

Heinl, L., 2023

Research output: Thesis › Master's Thesis

Open Access

File

74 Downloads (Pure)

Influence of anion and cation structure on ionic liquid based epoxy systems as reversible adhesives

Trausner, C., 2023

Research output: Thesis › Master's Thesis

Influence of coating parameters and calcination temperature on monolithic alumina supported nickel catalysts for methanation

Reiter, S., 2023

Research output: Thesis › Master's Thesis

Influence of Co-enriched surface zones in cemented carbides on the microstructure and mechanical properties of TiN/TiC0.6N0.4/ α-Al2O3 coatings

Konstantiniuk, F., Krobath, M., Ecker, W., Tkadletz, M., Czettl, C. & Schalk, N., Jan 2023, In: International journal of refractory metals & hard materials. 110.2023, January, 8 p., 106025.

Research output: Contribution to journal › Article › Research › peer-review

Open Access

Influence of cooling rates on new alloys from recycled mixed automotive scraps

Krall, P. & Pogatscher, S., 2023.

Research output: Contribution to conference › Paper › peer-review

Influence of corrosion fatigue on the fatigue strength of an AlSi10MgMn high-pressure die-casting alloy with regard to the surface condition

Schönowitz, M., Maier, B., Grün, F. & Bauer-Troßmann, K., 25 May 2023, In: Materials and Corrosion. 74.2023, 9, p. 1382-1389 8 p.

Research output: Contribution to journal › Article › Research › peer-review

Open Access

Influence of Different Hyperparameter Settings and Data Preprocessing Methods on the Classification of Nonmetallic Inclusions with Machine Learning Algorithms

Musi, R., 2023

Research output: Thesis › Master's Thesis

Open Access

File

70 Downloads (Pure)

Influence of Epoxy Chain Extender and Multi-Stage Compounding Process on the Properties of Poly-(R)-3-hydroxybutyrate

Hinterberger, K., 2023

Research output: Thesis › Master's Thesis

Open Access

File

262 Downloads (Pure)

Influence of external magnetic field on 3D electro vortex flow inside conducting liquids

Al Nasser, M., Barati, H., Redl, C., Ishmurzin, A., Voller, N., Hackl, G., Wu, M., Ludwig, A. & Kharicha, A., 2023.

Research output: Contribution to conference › Poster › Research › peer-review

INFLUENCE OF Fe, Mn, AND Cr ON THE BEHAVIOUR OF P DURING CARBOTHERMAL REDUCTION OF SYNTHETIC SLAGS

Gatschlhofer, C., Doschek-Held, K., Krammer, A., Wiszniewski, L. & Raupenstrauch, H., 2023.

Research output: Contribution to conference › Paper › peer-review

Open Access

Influence of focus offset on the microstructure of an intermetallic γ-TiAl based alloy produced by electron beam powder bed fusion

Ghibaudo, C., Wartbichler, R., Marchese, G., Clemens, H., Ugues, D. & Biamino, S., 3 Mar 2023, In: Journal of manufacturing processes. 89.2023, 3 March, p. 132-141 10 p.

Research output: Contribution to journal › Article › Research › peer-review

Open Access

Influence of Hot Band Annealing on Cold-Rolled Microstructure and Recrystallization in AA 6016

Cantergiani, E., Weißensteiner, I., Grasserbauer, J., Falkinger, G., Pogatscher, S. & Roters, F., Jan 2023, In: Metallurgical and materials transactions. A, Physical metallurgy and materials science . 54.2023, 1, p. 75-96 22 p.

Research output: Contribution to journal › Article › Research › peer-review

Open Access

Influence of hot liquid flowing water on Zeolite Y stability

Latschka, M., Wellscheid, B., Rameshan, R., Schöberl, T. R., Essmeister, J., Pacholik, G., Valentini, F., Balta, L., Limbeck, A., Rameshan, C., Kählig, H. & Föttinger, K., 15 Apr 2023, In: Microporous and Mesoporous Materials. 354.2023, 15 April, 11 p., 112557.

Research output: Contribution to journal › Article › Research › peer-review

Open Access

Influence of impurities such as C, Al and Cu on the melting behavior of LIB cathode materials under inert and reducing atmospheres

Wiszniewski, L., Hochsteiner, T., Fercher, A. & Raupenstrauch, H., Sept 2023.

Research output: Contribution to conference › Poster › Research › peer-review

Influence of impurities such as C, Al and Cu on the melting behavior of LIB cathode materials under inert and reducing atmospheres

Wiszniewski, L., Hochsteiner, T., Fercher, A. & Raupenstrauch, H., 2023, THE THIRD EURECA-PRO CONFERENCE ON RESPONSIBLE CONSUMPTION AND PRODUCTION.

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

Influence of Injection Molding Parameters on the Peel Strength between Plasma-Treated Fluoropolymer Films and Polycarbonate

Hubmann, M., Groten, J., Pletz, M., Grießer, T., Plevová, K., Nemitz, W. & Stadlober, B., 21 Mar 2023, In: Polymers. 15.2023, 6, 19 p., 1568.

Research output: Contribution to journal › Article › Research › peer-review

Open Access

Influence of processing conditions of industrial textile waste on rheological and thermal material properties

Jenull, U., Holzer, C. & Lucyshyn, T., 7 Sept 2023, 31st Leoben-Conference on Polymer Engineering and Science: Circular Thinking in Polymer Technology. Leoben: Polymer Competence Center Leoben GmbH, Vol. Volume 12. p. 1-12 12 p.

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

Influence of Processing Route on the Fracture Resistance of Equal Channel Angular Pressing Deformed Iron

Hohenwarter, A. & Pippan, R., Jan 2023, In: Advanced engineering materials. 25.2023, 1, 9 p., 2201011.

Research output: Contribution to journal › Article › Research › peer-review

Influence of spraying parameters on local surface temperature in slab casting of defect sensitive steel grades: Physical and numerical simulation

Taferner, M., Bernhard, C., Bernhard, M. C., Laschinger, J. & Ilie, S., 13 Jun 2023, Proceedings of 6th ESTAD (European Steel Technology and Application Days) 2023.

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

Influence of Temperature and Microstructure on the Magnetic Properties of Induction Heat Treated Steels

Jaszfi, V., 2023

Research output: Thesis › Doctoral Thesis

Influence of the adjustable EMBr on the asymmetric flow in a thin slab caster with a misaligned SEN

Vakhrushev, A., Karimi Sibaki, E., Wu, M., Ludwig, A., Nitzl, G., Tang, Y., Hackl, G., Watzinger, J. & Kharicha, A., 2023. 8 p.

Research output: Contribution to conference › Paper › peer-review

Open Access

Influence of the aspect ratio of the micro-cantilever on the determined Young’s modulus using the Euler-Bernoulli equation

Konstantiniuk, F., Krobath, M., Ecker, W., Czettl, C., Schalk, N. & Tkadletz, M., Jun 2023, In: Materials Today Communications. 35.2023, June, 9 p., 106225.

Research output: Contribution to journal › Article › Research › peer-review

Open Access

Influence of the rotational component of a submerged entry nozzle jet on the free surface oscillations under the applied DC magnetic field

Vakhrushev, A., Kharicha, A., Karimi Sibaki, E., Wu, M., Ludwig, A., Tang, Y., Hackl, G., Nitzl, G. & Watzinger, J., 2023.

Research output: Contribution to conference › Poster › Research › peer-review

Montanuniversität

Research output

Search results