Leitner Harald

Research output

Research output per year 2004 2005 2006 2007 2008 2009 2010 2013 2024

• 104 Article
• 40 Conference contribution
• 33 Commissioned report
• 26 Poster
• 6 More
  • 4 Patent
  • 1 Chapter
  • 1 Habilitation thesis

Research output per year

Research output per year

Search results

• 2016

  Influence of different types of localized corrosion on the fatigue behavior of an austenitic stainless steel

  Visser, A., Mori, G., Pippan, R., Kapp, M., Fluch, R., Leitner, H., Panzenböck, M. & Holper, B., 1 Jan 2016, NACE International - Corrosion Conference and Expo 2016. National Assoc. of Corrosion Engineers International, p. 3201-3210 10 p. (NACE - International Corrosion Conference Series; vol. 4).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  1 Citation (Scopus)
• 2014

  Einfluss der Präparationstechnik bei der Bestimmung des µ-Phasenanteils in einer Fe-25Co-15Mo Legierung mittels XRD

  Translated title of the contribution: Einfluss der Präparationstechnik bei der Bestimmung des µ-Phasenanteils in einer Fe-25Co-15Mo Legierung mittels XRDTurk, C., Kellezi, G., Leitner, H., Clemens, H. & Primig, S., 2014, Sonderbände der Praktischen Metallographie 46. p. 101-106

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• On the behavior of yttria/yttrium during mechanical alloying of a Fe-Y2O3 model alloy system

  Ressel, G., Parz, P., Fian, A., Holec, D., Primig, S., Puff, W., Leitner, H. & Clemens, H., 2014, Advanced Materials Research. p. 598-603

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
• 2012

  Abnormal grain growth in high-speed steels

  Schemmel, I., Martinschitz, C., Leitner, H. & Kellezi, G., 2012, Proceedings of the 9th International Tooling Conference. p. 81-87

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Carbon Distribution and the influence on the tempering behaviour in a hot work tool steel aisi H11

  Lerchbacher, C., Zinner, S. & Leitner, H., 2012, Advanced Materials Research Vol. 409 / THERMEC 2011 Supplement. p. 702-706

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• The influence of aluminium on the hardening behaviour of high-speed steels

  Kellezi, G. & Leitner, H., 2012, Proceedings of the 9th International Tooling Conference. p. 273-280

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
• 2010

  Nitriding of Metal Powder

  Egger, S., Leitner, H. & Raupenstrauch, H., 2010, Volume I. p. 249-254

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• SEM and TEM investigations of recovery and recrystallization in Technically pure Molybdenum

  Primig, S., Leitner, H., Lorich, A., Knabl, W., Clemens, H. & Stickler, R., 2010, Fortschritte in der Metallographie. Werkstoff-Informationsges., p. 289-294

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Small Scale Mechanical Testing and local electrode atom probe measurements on new materials for nuclear application

  Stergar, E., Nelson, A. T., Leitner, H. & Hosemann, P., 2010, Fortschritte in der Metallographie. Werkstoff-Informationsges., p. 397-402

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
• 2009

  Effect of a cryogenic treatment on the mechanical Properties of Tool steels

  Kellezi, G., Leitner, H. & Marsoner, S., 2009, Proceedings of the 8th International Tooling Conference. p. 859-868

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Experimental Studies and Thermodynamic Simulations of Phase Transformations in Ti-(41-45) Al-4Nb-1Mo-0.1B Alloys

  Clemens, H., Böck, B., Wallgram, W., Schmölzer, T., Drössler, L. M., Zickler, G., Leitner, H. & Otto, A., 2009, Experimental Studies and Thermodynamic Simulations of Phase Transformations in Ti-(41-45) Al-4Nb-1Mo-0.1B Alloys. Materials Research Society : MRS, p. 115-120

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Influence of alloying elements on the martensitic and bainitic structure of hot work Tool steels

  Siller, I., Mayer, S., Caliskanoglu, D. & Leitner, H., 2009, Proceedings of the 8th International Tooling Conference. p. 635-642

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Influence of heat treatment on the microstructure and toughness of din 1.2083 - type plastic mould steels

  Perko, J., Leitner, H., Strobl, V., Schneider, R. & List, M., 2009, Proceedings of the 8th International Tooling Conference. p. 597-609

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Influence of powder nitriding on the microstructure of a ledeburitic Tool steel

  Zuber, M., Schweiger, H. & Leitner, H., 2009, Proceedings of the 8th International Tooling Conference. p. 345-355

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Microstructure Evolution during Aging of two different Stainless Maraging Steels

  Schober, M., Schnitzer, R. & Leitner, H., 2009, Proceedings of the 17th IFHTSE Congress. p. 478-481

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• On the Recrystallization Behavior of Technically Pure Molybdenum

  Primig, S., Leitner, H., Rodriguez Chavez, A., Clemens, H., Lorich, A., Knabl, W. & Stickler, R., 2009, proc. in 17 th Plansee Seminar. p. 15/1-15/9

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Reverted Austenite and its Transformation Behaviour during Deformation in a PH 13-8 Mo Maraging Steel

  Schnitzer, R., Zickler, G., Hochfellner, R., Nöhrer, M., Zinner, S. & Leitner, H., 2009, Proceedings of the 17th IFHTSE Congress. p. 462-465

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Structure-Properties relationship of a PH 13-8 MO Maraging Steel

  Schnitzer, R., Zickler, G., Zinner, S. & Leitner, H., 2009, Proceedings of the 8th International Tooling Conference. p. 491-503

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Struktur - Eigenschaftsbeziehungen von Maraging-Stählen

  Translated title of the contribution: Struktur - Eigenschaftsbeziehungen von Maraging-StählenSchnitzer, R., Zinner, S. & Leitner, H., 2009, Forum für Metallurgie und Werktstofftechnik. p. 42-44

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
• 2008

  Kurzzeitkriechverhalten eines Warmarbeitsstahls

  Translated title of the contribution: Kurzzeitkriechverhalten eines WarmarbeitsstahlsWurmbauer, H., Scheu, C., Panzenböck, M., Stergar, E., Leitner, H., Clemens, H. & Caliskanoglu, Z. D., 2008, Herausforderungen neuer Werkstoffe an die Forschung und Werkstoffprüfung. p. 251-256

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• δ-Phase characterization of superalloy allvac 718 PlusTM

  Sommitsch, C., Stotter, C., Leitner, H., Mitsche, S., Letofsky-Papst, I. & Stockinger, M., 2008, TMS 2008. p. 1-6

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• δ-phase characterization of superalloy Allvac 718 Plus™

  Sommitsch, C., Stotter, C., Leitner, H., Mitsche, S., Letofsky-Papst, I. & Stockinger, M., 2008, TMS2008 - 137th Annual Meeting and Exhibition Supplemental Proceedings: Materials Processing and Properties. p. 63-68 6 p. (TMS Annual Meeting; vol. 2).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
• 2006

  Atom-Probe Tomography Investigation of the Precipitation Behavior in a Nickel and Aluminium

  Akre, J., Danoix, F., Erlach, S. D., Leitner, H. & Auger, P., 2006, Tooling Materials and their Application from Research to Market”. Editrice ANCORA, Edited by: M.Rosso, M.Actis Grande and D.Ugues, p. 651-659

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Characterization and Simulation of Precipitation during Heat Treatment of the Hot-work Tool Steel X38 CrMoV 5-3

  Sonderegger, B., Kozeschnik, E., Bischof, M., Leitner, H., Clemens, H., Svoboda, J. & Fischer, F. D., 2006, Tooling Materials and their Application from Research to Market”. Editrice ANCORA, Edited by: M.Rosso, M.Actis Grande and D.Ugues, p. 553-540

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Characterization of Nanometer-sized Precipitates in Tool Steels

  Leitner, H. & Clemens, H., 2006, Tooling Materials and their Application from Research to Market”. Editrice ANCORA, Edited by: M.Rosso, M.Actis Grande and D.Ugues, p. 695-706

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Characterization of the Behavior under Impact Loading of a Maraging Steel Strengthened by nano-Precipitates

  Lach, E., Redjaimia, A., Leitner, H. & Clemens, H., 2006, Proceeding of the 8th International Conference on Mechanical and Physical Behaviour of Materials under Nynamic Loading. p. 1-6

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  1 Citation (Scopus)

• Einfluss des Aluminiumgehaltes auf die Gefügeentwicklung eines niedriglegierten TRIP-Stahls

  Translated title of the contribution: Einfluss des Aluminiumgehaltes auf die Gefügeentwicklung eines niedriglegierten TRIP-StahlsSpenger, F., Traint, S., Leitner, H. & Clemens, H., 2006, Fortschritte in der Metallographie 38. Werkstoff-Informationsges., p. 215-222

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Einfluss von Aluminiumnitrid auf die Hochtemperaturduktilität von stranggegossenen Brammen

  Translated title of the contribution: Einfluss von Aluminiumnitrid auf die Hochtemperaturduktilität von stranggegossenen BrammenWinkelhofer, F., Parteder, E., Leitner, H., Clemens, H., Spiradek-Hahn, K. & Kozeschnik, E., 2006, Fortschritte in der Metallographie 38. Werkstoff-Informationsges., p. 281-288

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Gefügebewertung an einem martensitischen Werkstoff durch Transmissionselektronenmikroskopie (TEM) und Neutronenkleinwinkelstreuung (SANS)

  Translated title of the contribution: Gefügebewertung an einem martensitischen Werkstoff durch Transmissionselektronenmikroskopie (TEM) und Neutronenkleinwinkelstreuung (SANS)Sonnleitner, M., Klein, M., Spiradek-Hahn, K., Staron, P., Leitner, H. & Clemens, H., 2006, Fortschritte in der Metallographie 38. Werkstoff-Informationsges., p. 97-104

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Gefügecharakterisierung eines Warmarbeitsstahls mit martensitisch-bainitischem Mischgefüge

  Translated title of the contribution: Gefügecharakterisierung eines Warmarbeitsstahls mit martensitisch-bainitischem MischgefügeMayer, S., Pölzl, S., Hawranek, G., Scheu, C., Leitner, H., Clemens, H. & Siller, I., 2006, Fortschritte in der Metallographie 38. Werkstoff-Informationsges., p. 379-385

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Isothermal Aging Kinetics of NiAl Precipitates in a Secondary Hardening Steel

  Erlach, S. D., Siller, I., Leitner, H. & Clemens, H., 2006, Tooling Materials and their Application from Research to Market”. Editrice ANCORA, Edited by: M.Rosso, M.Actis Grande and D.Ugues, p. 725-732

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Metallographische Präparation von Wolfram und Wolframlegierungen zur Gefügeuntersuchung mittels licht- und rasterelektronenmikroskopischer Methoden

  Translated title of the contribution: Metallographische Präparation von Wolfram und Wolframlegierungen zur Gefügeuntersuchung mittels licht- und rasterelektronenmikroskopischer MethodenJedlicka, C., Pölzl, S., Hawranek, G., Leitner, H., Clemens, H., Stickler, R., Hoffmann, A. & Knabl, W., 2006, Fortschritte in der Metallographie 38. Werkstoff-Informationsges., p. 371-378

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Mikrostruktur einer C/C-Cu Verbindung für Erste Wand Komponenten des Iter

  Translated title of the contribution: Mikrostruktur einer C/C-Cu Verbindung für Erste Wand Komponenten des IterEidenberger, E., Scheu, C., Hawranek, G., Pippan, R., Schedler, B., Leitner, H. & Clemens, H., 2006, Fortschritte in der Metallographie 38. Werkstoff-Informationsges., p. 525-530

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Short-time heat treatment of high-speed steels

  Leitner, H., Caliskanoglu, D., Vrtacnik, K. & Clemens, H., 2006, Tooling Materials and their Application from Research to Market”. Editrice ANCORA, Edited by: M.Rosso, M.Actis Grande and D.Ugues, p. 119-126

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
• 2005

  An advanced approach to the characterization of precipitates in tool steels

  Bischof, M. A., Erlach, S. D., Staron, P., Leitner, H. & Clemens, H., 2005, Proc. Solid-Solid Phase Transformations in Inorganic Materials. TMS, p. 8-8

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Experimental Studies and Thermodynamic Simulation of Phase Transformations in g-TiAl Based Alloys

  Chladil, H., Clemens, H., Leitner, H., Bartels, A., Gerling, R., Marketz, W. & Kozeschnik, E., 2005, Intergrative and Interdisciplinary Aspects of Intermetallics. Materials Research Society : MRS, p. S5.47.1-S5.47.6

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Massive Transformation in High Niobium Containing TiAl Alloys

  Bartels, A., Bystrzanowski, S., Chladil, H., Leitner, H., Clemens, H., Gerling, R. & Schimansky, F.-P., 2005, Intergrative and Interdisciplinary Aspects of Intermetallics. Materials Research Society : MRS, p. S5.48.1-S5.48.6

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  9 Citations (Scopus)

• Microstructural evolution of a rapidly solidified high-speed steel during high temperature annealing

  Stotter, C., Leitner, H., Ebner, R., Ramminger, P. & Brandstätter, E., 2005, Microstructural evolution of a rapidly solidified high-speed steel during high temperature annealing. p. 53-61

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Microstructure and Mechanical Properties of Si and Y Doped Tantalum

  Bischof, M. A., Mayer, S., Leitner, H., Clemens, H., Pranzas, K., Staron, P., Dehm, G., Knabl, W., Voiticek, A. & Geiger, E., 2005, 16th International Plansee Seminar, (G. Kneringer, P. Rödhammer, H. Wildner, eds.). Plansee AG, p. 489-503

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
• 2004

  On the Precipitation Behavior of a Ni and Alloyed Martensitic Tool Steel

  Erlach, S., Danoix, F., Lemarchand, D., Leitner, H., Bischof, M. A., Siller, I. & Clemens, H., 2004, MS&T 2004 Conference Proceedings . p. 633-641

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  6 Citations (Scopus)