Kraleva Irina Rosenova

Research output

Research output per year 2007 2007 2008 2009 2010 2011 2012 2017 2020 2021 2022 2023 2025

• 17 Article
• 6 Poster
• 3 Chapter
• 2 Commissioned report
• 5 More
  • 2 Conference contribution
  • 1 Paper
  • 1 Web publication/site
  • 1 Master's Thesis

Research output per year

Research output per year

Search results

• 2025

  Towards high-strength electrolyte-supported solid oxide fuel cells

  Jana, A., Kraleva, I., Schlacher, J., Supancic, P., Egger, A., Bucher, E. & Bermejo, R., Feb 2025, In: Journal of the European Ceramic Society. 45, 2, 116929.

  Research output: Contribution to journal › Article › Research › peer-review

  Open Access
• 2024

  3D-printed alumina-based ceramics with spatially resolved porosity

  Nohut, S., Schlacher, J., Kraleva, I., Schwentenwein, M. & Bermejo, R., 2024, In: International journal of applied ceramic technology. 21.2024, 1, p. 89-104 16 p.

  Research output: Contribution to journal › Article › Research › peer-review

  Open Access
• 2023

  Effect of second phase addition of zirconia on the mechanical response of textured alumina ceramics

  Hofer, A.-K., Kraleva, I. R., Prötsch, T., Vratanar, A., Wratschko, M. & Bermejo Moratinos, R., 2023, In: Journal of the European Ceramic Society. 43, 7, p. 2935-2942

  Research output: Contribution to journal › Article › Research › peer-review

• Functionally Graded Ceramics by Lithography-Based Ceramic Manufacturing (LCM)

  Nohut, S., Geier, S., Kraleva, I., Schwentenwein, M. & Bermejo Moratinos, R., 2023, In: Journal of additive manufacturing technologies. 2, 1, p. 678

  Research output: Contribution to journal › Article › Research › peer-review

  Open Access

• Prediction of edge and tunnelling crack formation in layered ceramics using a stress-energy fracture criterion

  Papšík, R., Ševeček, O., Hofer, A.-K., Kraleva, I. R., Kreith, J. & Bermejo, R., 1 Jul 2023, In: Journal of the European Ceramic Society. 43, 7, p. 2928-2934 7 p.

  Research output: Contribution to journal › Article › Research › peer-review

  Open Access
• 2022

  Lithography-based additive manufacturing of porosity graded alumina

  Nohut, S., Geier, S., Kraleva, I. R., Schwentenwein, M. & Bermejo Moratinos, R., 2022, In: Additive Manufacturing Letters. 3, 100060.

  Research output: Contribution to journal › Article › Research › peer-review

  Open Access

• Multifunctional performance of Ti2AlC MAX phase/2D braided alumina fiber laminates

  Gonzales-Julian, J., Kraleva, I. R., Belmonte, M., Jung, F., Gries, T. & Bermejo Moratinos, R., 2022, In: Journal of the American Ceramic Society. 105, p. 102-130

  Research output: Contribution to journal › Article › Research › peer-review

  Open Access
• 2021

  Additive manufacturing of highly textured alumina ceramics

  Hofer, A.-K., Kraleva, I. & Bermejo, R., Mar 2021, In: Open ceramics. 5, 100085.

  Research output: Contribution to journal › Article › Research › peer-review

  Open Access
  5 Citations (Scopus)

• Additive manufacturing of high-strength alumina through a multi-material approach

  Schlacher, J., Hofer, A.-K., Geier, S., Kraleva, I. R., Papšík, R., Schwentenwein, M. & Bermejo, R., Mar 2021, In: Open ceramics. 5, 100082.

  Research output: Contribution to journal › Article › Research › peer-review

  Open Access
  2 Citations (Scopus)

• Modelling of edge and tunnelling cracks initiation in ceramic laminates using the stress-energy criterion

  Papšík, R., Ševeček, O. (Co-editor), Hofer, A.-K. (Co-editor), Kraleva, I. (Co-editor) & Bermejo, R. (Co-editor), 23 Nov 2021.

  Research output: Contribution to conference › Poster › Research

  Open Access

  File
  57 Downloads (Pure)
• 2020

  A novel approach to assess the mechanical reliability of thin, ceramic-based multilayer architectures

  Gruber, M., Kraleva, I. R., Supancic, P. H., Danzer, R. & Bermejo, R., Nov 2020, In: Journal of the European Ceramic Society. 40, 14, p. 4727-4736 10 p.

  Research output: Contribution to journal › Article › Research › peer-review
  2 Citations (Scopus)

• Microstructure, ionic conductivity and mechanical properties of tape-cast Li_1.5Al_0.5Ti_1.5P₃O₁₂ electrolyte sheets

  Dashjav, E., Gellert, M., Yan, G., Grüner, D., Kaiser, N., Spannenberger, S., Kraleva, I., Bermejo, R., Gerhards, M. T., Ma, Q., Malzbender, J., Roling, B., Tietz, F. & Guillon, O., 1 Jan 2020, In: Journal of the European Ceramic Society.

  Research output: Contribution to journal › Article › Research › peer-review
  8 Citations (Scopus)
• 2018

  Mechanical characterization of Ti(C,N)-based cermets fabricated through different colloidal processing routes

  Dios, M., Kraleva, I., González, Z., Alvaredo, P., Ferrari, B., Gordo, E. & Bermejo, R., 2018, In: Journal of alloys and compounds. 732, p. 806-817 12 p.

  Research output: Contribution to journal › Article › Research › peer-review
  17 Citations (Scopus)
• 2017

  Influence of the colloidal processing route on the mechanical properties of Ti(C,N)-based cermets

  de Dios, M., Gonzales, Z., Ferrari, B., Kraleva, I., Bermejo, R., Alvaredo, P. & Gordo, E., 2017

  Research output: Non-textual form › Web publication/site › Research

  File

• Strength distribution and fracture analyses of LiNbO₃ and LiTaO₃ single crystals under biaxial loading

  Gruber, M., Kraleva, I., Supancic, P., Bielen, J., Kiener, D. & Bermejo, R., Nov 2017, In: Journal of the European Ceramic Society. 37, 14, p. 4397-4406

  Research output: Contribution to journal › Article › Research › peer-review
  21 Citations (Scopus)
• 2014

  Effect of residuel stresses on the strength of glass-ceramic multilayer composites different microstructures

  Bermejo Moratinos, R., Krautgasser, C., Deluca, M., Strobl, S., Kraleva, I., Petschenig, I., Aldrian, F., Supancic, P. & Danzer, R., 2014, Praktische Metallographie Sonderband. p. 169-174

  Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research
• 2013

  Mechanical Properties of Low-Temperature Co-Fired Ceramics Fired at Different Temperatures

  Makarovic, K., Bermejo Moratinos, R., Kraleva, I., Holc, J., Hrovat, M., Bencan, A., zarnik, M. S., Belavic, D. & Kosec, M., 2013, Proceedings of the 48th International Conference on Microelectronics, Devices and Materials. p. 1-1

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
• 2012

  The Effect of Defects and Materials Texture on the Fracture of Low-Pressure Injection Moulded Alumina Components

  Lube, T., Morrell, R. & Kraleva, I., 2012, Fractography of Glasses and Ceramics VI. p. 57-64

  Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  1 Citation (Scopus)

• The effect of the phase composition on the mechanical properties of LTCC material

  Makarovic, K., Bermejo Moratinos, R., Kraleva, I., Bencan, A., Hrovat, M., Holc, J., Malic, B. & Kosec, M., 2012, In: International journal of applied ceramic technology. 10, p. 449-457

  Research output: Contribution to journal › Article › Research › peer-review
  5 Citations (Scopus)
• 2011

  Charakterisierung von LTCC-Leiterplatten unter biaxialer Belastung: Effekt der Metallisierung auf die Festigkeit

  Translated title of the contribution: Charakterisierung von LTCC-Leiterplatten unter biaxialer Belastung: Effekt der Metallisierung auf die FestigkeitBermejo Moratinos, R., Sestakova, L., Kraleva, I., Supancic, P. & Danzer, R., 2011.

  Research output: Contribution to conference › Poster › Research › peer-review

  Open Access

  File
  39 Downloads (Pure)

• Defects and Fracture Statistics in Low-Pressure Injection Moulded Alumina Components

  Lube, T. & Kraleva, I., 2011, In: Practical metallography = Praktische Metallographie. 48, p. 488-495

  Research output: Contribution to journal › Article › Research › peer-review

  1 Citation (Scopus)

• Evaluation of the Strength of Low Temperature Co-fired Ceramics under Biaxial Stress

  Bermejo Moratinos, R., Supancic, P., Kraleva, I., Krautgasser, C., Aldrian, F., Morrell, R. & Danzer, R., 2011.

  Research output: Contribution to conference › Poster › Research › peer-review

  Open Access

  File
  46 Downloads (Pure)

• Strength reliability of 3D low temperature co-fired multilayer ceramics under biaxial loading

  Bermejo Moratinos, R., Supancic, P., Kraleva, I., Morrell, R. & Danzer, R., 2011, In: Journal of the European Ceramic Society. 31, p. 745-753

  Research output: Contribution to journal › Article › Research › peer-review

  Open Access

  File
  29 Citations (Scopus)

  220 Downloads (Pure)
• 2010

  Defects and Fracture Statistics in Low-pressure Injection Moulded Alumina Components

  Lube, T., Kraleva, I. & Veskovic, S., 2010, In: Practical metallography = Praktische Metallographie. 42, p. 159-164

  Research output: Contribution to journal › Article › Research › peer-review

• Fracture behaviour of low temperature cofired ceramics under biaxial loading: Influence of metal-ceramic internal architecture

  Bermejo, R., Kraleva, I., Morrell, R., Aldrian, F., Supancic, P. & Danzer, R., 1 Dec 2010.

  Research output: Contribution to conference › Paper › peer-review

• Influence of metallisation on the mechanical behaviour of Low Temperature Co-fired Ceramics under biaxial loading

  Translated title of the contribution: Influence of metallisation on the mechanical behaviour of Low Temperature Co-fired Ceramics under biaxial loadingBermejo Moratinos, R., Lucie, S., Kraleva, I., Supancic, P. & Danzer, R., 2010.

  Research output: Contribution to conference › Poster › Research › peer-review

  Open Access

  File
  27 Downloads (Pure)
• 2009

  Fracture response of low temperature cofired ceramics

  Bermejo Moratinos, R., kraleva, I., Morrell, R., Aldrian, F., Supancic, P. & Danzer, R., 2009.

  Research output: Contribution to conference › Poster › Research › peer-review

• Influence of Internal Architectures on the Fracture Response of LTCC Components

  Bermejo Moratinos, R., Kraleva, I., Antoni, M., Supancic, P. & Morrell, R., 2009, Key engineering materials. Vol. 409. p. 275-278 (Key engineering materials).

  Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  15 Citations (Scopus)

• Mechanical behaviour of low temperature co-fired ceramics under biaxial loading: Influence of internal architecture on the fracture response

  Bermejo, R., Kraleva, I., Aldrian, F., Supancic, P. & Morrell, R., 1 Dec 2009, 11th International Conference and Exhibition of the European Ceramic Society 2009. Vol. 1. p. 276-280 5 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
• 2008

  Ber-03-2008-Epcos

  Translated title of the contribution: Ber-03-2008-EpcosKraleva, I., Kreith, J., Supancic, P. & Danzer, R., 2008, Unknown Publisher.

  Research output: Book/Report › Commissioned report › Transfer › peer-review

• Influence of internal architectures on the fracture response of LTCC components

  Bermejo Moratinos, R., kraleva, I., Antoni, M., Supancic, P. & Morrell, R., 2008.

  Research output: Contribution to conference › Poster › Research › peer-review
• 2007

  Potential Devonian and Lower Carboniferous source rocks in the northwestern part of the Dniepr-Donets Basin (Ukraine)

  Kraleva, I. R., 2007

  Research output: Thesis › Master's Thesis

• Source potential and thermal history of the Dniepr-Donets Basin (Ukraine)

  Sachsenhofer, R., Reischenbacher, D., Kraleva, I. & Bechtel, A., 2007, Unknown Publisher.

  Research output: Book/Report › Commissioned report › Transfer › peer-review