Supervised Work
- 1 - 50 out of 68 results
Search results
-
2026
Advancing the micromechanical characterization of silicon with a focus on high temperatures
Schaffar, G., 2026Research output: Thesis › Doctoral Thesis
Open AccessFile11 Downloads (Pure) -
Structural and Dynamical Properties of Oxygen Vacancy-Enriched Perovskite Oxides
Ražnjević, S., 2026Research output: Thesis › Doctoral Thesis
Open AccessFile3 Downloads (Pure) -
2025
Evaluating the Effects of Laser Dicing on the Residual Stress and Mechanical Properties of Silicon and Silicon Carbide Wafers
Asci, A., 2025Research output: Thesis › Master's Thesis
-
Impact of Microstructure, Stress, and Phase Composition on Hydrogen Permeation in Duplex Steel: A Synchrotron X-ray Diffraction Study
Pogrielz, T., 2025Research output: Thesis › Doctoral Thesis
Open AccessFile36 Downloads (Pure) -
Time- and Space-Resolved X-ray Diffraction for Stress Analysis in Semiconductor Devices
Ziegelwanger, T., 2025Research output: Thesis › Doctoral Thesis
Open AccessFile11 Downloads (Pure) -
2024
A laboratory total scattering approach for studying short-range order in a novel precipitation-strengthened compositionally complex alloy
Bauer, N. E., 2024Research output: Thesis › Master's Thesis
Open AccessFile313 Downloads (Pure) -
Effect of Cu on the Carbide and Nitride Formation in Steels for High-Power Density Gears
Böhle, S. I., 2024Research output: Thesis › Doctoral Thesis
-
2023
Advancing Mechanical Property Characterisation for Metallic Foils using Experiments, Simulations, and Machine Learning
Trost, C. O. W., 2023Research output: Thesis › Doctoral Thesis
Open AccessFile3 Downloads (Pure) -
Analyse der Prozesskostenzusammensetzung bei der Herstellung additiv gefertigter, metallischer Bauteile in Kleinst- und Kleinserien durch pulverbettbasiertes Laserstrahlschmelzen
Bodner, S. C., 12 Feb 2023, 103 p.Research output: Thesis › Master's Thesis
-
Cross-Sectional Characterization of Functionally Graded Materials
Bodner, S., 2023, 182 p.Research output: Thesis › Doctoral Thesis
Open AccessFile149 Downloads (Pure) -
Effect of Si alloying on Ti(Al)N hard coatings
Moritz, Y., 2023Research output: Thesis › Doctoral Thesis
Open AccessFile209 Downloads (Pure) -
Exploration of phase transformations in lightweight structural materials by means of in situ high-energy X-ray methods
Graf, G., 2023Research output: Thesis › Doctoral Thesis
-
Hydrogen and chloride induced stress corrosion cracking of high strength steel wires
Truschner, M., 2023Research output: Thesis › Doctoral Thesis
-
Influence of Temperature and Microstructure on the Magnetic Properties of Induction Heat Treated Steels
Jaszfi, V., 2023Research output: Thesis › Doctoral Thesis
-
Microstructural characterization and mechanical properties of nanocomposite AlCrSiN thin films
Kutlesa, K., 2023Research output: Thesis › Master's Thesis
Open AccessFile95 Downloads (Pure) -
Process-structure-property relationships of β-NiAl and η-Ni3Ti strengthened Co-free maraging steels
Zeisl, S., 2023Research output: Thesis › Doctoral Thesis
Open AccessFile248 Downloads (Pure) -
Strain Engineering in Trench Power MOSFETs: Characterization and Optimization of Mechanical and Electrical Transistor Properties
Karner, S., 2023Research output: Thesis › Doctoral Thesis
-
2022
Additive Fertigung von Nickelbasissuperlegierungen: Rissbildung, Gefügeanalyse und Prozessoptimierung
Translated title of the contribution :additive manufacturing of nickel-base superalloys: crack formation, microstructural analysis and process optimization Research output: Thesis › Master's Thesis
-
Stability of Retained Austenite in a Bainitic Low Alloyed Steel and its Response to Mechanical and Thermal Loading
Pfleger-Schopf, B., 2022Research output: Thesis › Doctoral Thesis
-
ZrN-based hard coatings deposited by chemical and physical vapor deposition
Frank, F., 2022Research output: Thesis › Doctoral Thesis
Open AccessFile412 Downloads (Pure) -
2021
Cross-sectional Characterisation of Thin Films for the Knowledge-based Design of Hard Coatings
Gruber, D., 2021Research output: Thesis › Doctoral Thesis
Open AccessFile315 Downloads (Pure) -
Interfacial damage of TiN coated high speed steels under a realistic spectrum of shear- and normal loads
Gsellmann, M., 2021Research output: Thesis › Doctoral Thesis
-
Locally resolved deformation and fracture processes near interfaces
Alfreider, M., 2021Research output: Thesis › Doctoral Thesis
Open AccessFile417 Downloads (Pure) -
Microstructural and Mechanical Properties of Si-alloyed AlCrN Hard Coatings: Grain Boundary Segregation Engineering by CrN Precipitation
Ziegelwanger, T., 2021Research output: Thesis › Master's Thesis
Open AccessFile200 Downloads (Pure) -
Novel Multifunctional Coatings for Advanced Tribological Applications
Jäger, N., 2021Research output: Thesis › Doctoral Thesis
Open AccessFile105 Downloads (Pure) -
Stress engineering to reduce mechanical loading in Cu-based metallizations
Souli, I., 2021Research output: Thesis › Doctoral Thesis
Open AccessFile2 Downloads (Pure) -
Surface Damage of Rotating Anodes and the Impact on the X-ray Emission
Siller, M., 2021Research output: Thesis › Doctoral Thesis
-
2020
Chemical changes of TiC particles in a tool steel matrix alloy during hot isostatic pressing
Pörnbacher, J., 2020Research output: Thesis › Doctoral Thesis
-
Chemical Vapor Deposition of Hard Coatings in the System Ti-B-C-N
Kainz, C., 2020Research output: Thesis › Doctoral Thesis
Open AccessFile648 Downloads (Pure) -
Cross-sectional and High-Temperature Structure-Property Relationships in Nanocrystalline Thin Films
Meindlhumer, M., 2020Research output: Thesis › Doctoral Thesis
Open AccessFile113 Downloads (Pure) -
CVD TiCN/α-Al2O3 coated cemented carbide cutting tools
Stylianou, R. P., 2020Research output: Thesis › Doctoral Thesis
-
2019
Austenite memory and spontaneous recrystallization and its influence on the martensitic substructure of a PH 15-5 steel during solution annealing
Brandl, D. C., 2019Research output: Thesis › Doctoral Thesis
Open AccessFile76 Downloads (Pure) -
Design and fabrication of various MEMS-based structures for investigating thermo-mechanical and fatigue behavior of thin metal films and metal barriers
Saghaeian, F., 2019Research output: Thesis › Doctoral Thesis
Open AccessFile571 Downloads (Pure) -
2018
Combinatorial study of process parameters, microstructure and mechanical properties in Inconel 718 parts produced by additive manufacturing
Bodner, S., 2018, 62 p.Research output: Thesis › Master's Thesis
Open AccessFile136 Downloads (Pure) -
Development and characterisation of advanced intermetallic titanium aluminide alloys by means of diffraction and scattering techniques
Erdely, P., 2018Research output: Thesis › Doctoral Thesis
-
Hard coatings on cemented carbide cutting tools: process technology and application
Gassner, M., 2018Research output: Thesis › Doctoral Thesis
Open AccessFile1393 Downloads (Pure) -
Mikrostrukturbasierte Simulation der Eigenspannungsverteilung in wärmebehandelten Turbinenscheiben aus INCONEL718
Translated title of the contribution :Microstructural based simulation of the residual stress field in heat treated turbine discs from INCONEL718 Research output: Thesis › Doctoral Thesis
Open AccessFile141 Downloads (Pure) -
Synthesis-Structure-Property Relations for Arc Evaporated Al-Cr-O Hard Coatings
Pohler, M., 2018Research output: Thesis › Doctoral Thesis
-
Thermo-mechanical behaviour of Mo-Ag thin films
Trost, C. O. W., 2018Research output: Thesis › Master's Thesis
Open AccessFile127 Downloads (Pure) -
2017
Depth resolved stress gradient and dislocation analyses in III-N multilayer structures
Reisinger, M., 2017Research output: Thesis › Doctoral Thesis
Open AccessFile291 Downloads (Pure) -
Microstructural, grain boundary and interface design of nanostructured thin films: towards structure-property functionalization
Daniel, R., 2017Research output: Thesis › Habilitation thesis › peer-review
-
Structural and Mechanical Gradients in Nanostructured Thin Films
Zalesak, J., 2017Research output: Thesis › Doctoral Thesis
Open AccessFile485 Downloads (Pure) -
2016
Charakterisierung eines karbidfreien bainitischen Stahls der dritten Generation „Advanced High Strength Steels“
Translated title of the contribution :Characterization of a carbide-free bainitic steel belonging to the third generation of „Advanced High Strength Steels“ Research output: Thesis › Doctoral Thesis
-
DC Magnetron Sputter Deposition of Molybdenum Oxide Thin Films from Metallic Mo and Ceramic MoOx Targets: Synthesis, Structure and Property Relations
Pachlhofer, J., 2016Research output: Thesis › Doctoral Thesis
Open AccessFile784 Downloads (Pure) -
Micromechanical Characterization of Self-Organized Ti1-xAlxN Nanolamellae: The Influence of Interface Coherency and Phase Alteration on Fracture Behaviour
Meindlhumer, M., 2016Research output: Thesis › Master's Thesis
Open AccessFile219 Downloads (Pure) -
Nanoscale Investigations of Performance-critical Regions in Non-homogeneous Metallic and Ceramic Thin Films
Todt, J., 2016Research output: Thesis › Doctoral Thesis
-
2015
Advanced characterization techniques for the knowledge-based design of hard coatings
Tkadletz, M., 2015, 117 p.Research output: Thesis › Doctoral Thesis
Open AccessFile566 Downloads (Pure) -
Macro- and Microscopic Properties of Gradient Ultra High Strength Thermo-Mechanically Rolled Seamless Steel Tubes
Winter, G., 2015Research output: Thesis › Doctoral Thesis
Open AccessFile294 Downloads (Pure) -
2014
Advanced Diffraction Techniques for Microstructure and Stress Characterisation at Multiple Scales
Stefenelli, M., 2014Research output: Thesis › Doctoral Thesis
Open AccessFile599 Downloads (Pure) -
New findings on the mechanisms during mechanical alloying of a Fe-Y2O3 model alloy and an oxide dispersion strengthened high-alloyed steel
Ressel, G., 2014, 155 p.Research output: Thesis › Doctoral Thesis
Open AccessFile198 Downloads (Pure)