Bodner Sabine

Research output

Research output per year 2015 2020 2021 2022 2023 2024

• 18 Article
• 2 Master's Thesis
• 1 Doctoral Thesis

Research output per year

Research output per year

Search results

• 2024

  Comparing the properties of cellulose nanofibrils from wood and bark of Norway spruce (Picea abies KARST.) and silver poplar (Populus alba L.)

  Supriyadi, D., Bodner, S., Keckes, J., Gindl-Altmutter, W. & Veigel, S., 4 Jun 2024, (E-pub ahead of print) In: Carbohydrate polymer technologies and applications. 7.2024, June, 14 p., 100527.

  Research output: Contribution to journal › Article › Research › peer-review

  Open Access
• 2023

  Analyse der Prozesskostenzusammensetzung bei der Herstellung additiv gefertigter, metallischer Bauteile in Kleinst- und Kleinserien durch pulverbettbasiertes Laserstrahlschmelzen

  Bodner, S. C., 12 Feb 2023, 103 p.

  Research output: Thesis › Master's Thesis

• Cross-Sectional Characterization of Functionally Graded Materials

  Bodner, S., 2023, 182 p.

  Research output: Thesis › Doctoral Thesis

  Open Access

  File
  94 Downloads (Pure)

• Delignification and Densification as a Route to Enable the Use of Wheat Straw for Structural Materials

  Neudecker, F., Jakob, M., Bodner, S., Keckes, J., Buerstmayr, H. & Gindl-Altmutter, W., 4 May 2023, In: ACS Sustainable Chemistry and Engineering. 11.2023, 19, p. 7596-7604 9 p.

  Research output: Contribution to journal › Article › Research › peer-review

  Open Access

• The suitability of common reed (Phragmites australis) for load-bearing structural materials

  Albrecht, K., Neudecker, F., Veigel, S., Bodner, S., Keckes, J. & Gindl-Altmutter, W., Oct 2023, In: Journal of materials science. 58.2023, 39, p. 15411-15420 10 p.

  Research output: Contribution to journal › Article › Research › peer-review

  Open Access
• 2022

  Cracking mechanism in a laser powder bed fused cold-work tool steel: The role of residual stresses, microstructure and local elemental concentrations

  Platl, J., Bodner, S. C., Hofer, C., Landefeld, A., Leitner, H., Turk, C., Nielsen, M-A., Demir, A. G., Previtali, B., Keckes, J. & Schnitzer, R., 15 Feb 2022, In: Acta materialia. 225.2022, 15 February, 16 p., 117570.

  Research output: Contribution to journal › Article › Research › peer-review

  Open Access

• Degradation of regenerated cellulose filaments by hydrogen chloride under aqueous and non-aqueous conditions

  Ungerer, B., Sulaeva, I., Bodner, S., Potthast, A., Keckes, J., Müller, U. & Veigel, S., Dec 2022, In: Carbohydrate polymer technologies and applications. 4.2022, December, 9 p., 100238.

  Research output: Contribution to journal › Article › Research › peer-review

  Open Access

• Effect of cold deformation on the stress corrosion cracking resistance of a high-strength stainless steel

  Truschner, M., Janda, A., Bodner, S. C., Keplinger, A. & Mori, G. K., 6 Nov 2022, (E-pub ahead of print) In: Journal of materials science. 57.2022, November, p. 20447–20461 15 p.

  Research output: Contribution to journal › Article › Research › peer-review

  Open Access

• Graded Inconel-stainless steel multi-material structure by inter- and intralayer variation of metal alloys

  Bodner, S., Hlushko, K., van de Vorst, L. T. G., Meindlhumer, M., Todt, J., Nielsen, M. A., Hooijmans, J. W., Saurwalt, J. J., Mirzaei, S. & Keckes, J., 19 Nov 2022, In: Journal of Materials Research and Technology. 21.2022, November-December, p. 4846-4859 14 p.

  Research output: Contribution to journal › Article › Research › peer-review

  Open Access

• Influence of Hatch Strategy on Crystallographic Texture Evolution, Mechanical Anisotropy of Laserbeam Powder Bed Fused S316L Steel

  Bodner, S., Hlushko, K., Kutleša, K., Todt, J., Renk, O., Meindlhumer, M., Resch, F., Nielsen, M-A., Keckes, J. & Eckert, J., 2 Aug 2022, In: Advanced engineering materials. 2022, 25 p., 2200524.

  Research output: Contribution to journal › Article › Research › peer-review

  Open Access

• Local microstructural evolution and the role of residual stresses in the phase stability of a laser powder bed fused cold-work tool steel

  Platl, J., Bodner, S. C., Harald, L., Turk, C., Nielsen, M-A., Keckes, J. & Schnitzer, R., 22 Sept 2022, In: Materials characterization. 193.2022, November, 11 p., 112318.

  Research output: Contribution to journal › Article › Research › peer-review

  Open Access
• 2021

  Correlative cross-sectional characterization of nitrided, carburized and shot-peened steels: synchrotron micro-X-ray diffraction analysis of stress, microstructure and phase gradients

  Bodner, S. C., Meindlhumer, M., Ziegelwanger, T., Winklmayr, H., Hatzenbichler, T., Schindelbacher, C., Sartory, B., Krobath, M., Ecker, W., Schell, N. & Keckes, J., 3 Feb 2021, In: Journal of Materials Research and Technology. 11.2021, March-April, p. 1396-1410 15 p.

  Research output: Contribution to journal › Article › Research › peer-review

  Open Access

  File
  1 Citation (Scopus)

  150 Downloads (Pure)

• Predicting strength of Finnish birch veneers based on three different failure criteria

  Pramreiter, M., Bodner, S. C., Keckes, J., Stadlmann, A., Feist, F., Baumann, G., Maawad, E. & Müller, U., 15 Mar 2021, In: Holzforschung. 75.2021, 9, p. 847-856 10 p.

  Research output: Contribution to journal › Article › Research › peer-review

  Open Access
  1 Citation (Scopus)

• Zerstörungsfreie Charakterisierung von Furnieren für strukturelle Verbundwerkstoffe: Evaluierung von Methoden und Einflussfaktoren Maximilian

  Pramreiter, M., Bodner, S. C., Keckes, J., Stadlmann, A., Konnerth, J., Feist, F., Baumann, G., Huber, C. & Müller, U., 2021, In: Holztechnologie. 62.2021, 1, p. 5-18 13 p.

  Research output: Contribution to journal › Article › Research › peer-review
• 2020

  Inconel-Steel Multilayers by Liquid Dispersed Metal Powder Bed Fusion: Microstructure, Residual Stress and Property Gradients

  Bodner, S. C., van de Vorst, L. T. G., Zalesak, J., Todt, J., Keckes, J., Maier-Kiener, V., Sartory, B., Schell, N., Hooijmans, J. W., Saurwalt, J. J. & Keckes, J., Mar 2020, In: Additive Manufacturing. 32.2020, March, 101027.

  Research output: Contribution to journal › Article › Research › peer-review
  10 Citations (Scopus)

• Influence of Fiber Deviation on Strength of Thin Birch (Betula pendula Roth.) Veneers

  Pramreiter, M., Bodner, S. C., Keckes, J., Stadlmann, A., Kumpenza, C. & Müller, U., 1 Apr 2020, In: Materials. 13.2020, 7, 12 p., 1484.

  Research output: Contribution to journal › Article › Research › peer-review

  Open Access
  4 Citations (Scopus)

• Structure and electrical resistivity of individual carbonised natural and man-made cellulose fibres

  Gindl-Altmutter, W., Czabany, I., Unterweger, C., Gierlinger, N., Xiao, N., Bodner, S. C. & Keckes, J., 7 May 2020, In: Journal of materials science. 55.2020, 23, p. 10271-10280 10 p.

  Research output: Contribution to journal › Article › Research › peer-review

  Open Access
  3 Citations (Scopus)
• 2019

  Cross-sectional gradients of residual stresses, microstructure and phases in a nitrided steel revealed by 20 µm synchrotron X-ray diffraction

  Bodner, S. C., Ziegelwanger, T., Meindlhumer, M., Holcova, J., Todt, J., Schell, N. & Keckes, J., Oct 2019, In: Metallurgia Italiana. 2019, 10, p. 7-11 5 p.

  Research output: Contribution to journal › Article › Research › peer-review
• 2018

  A new device for high-temperature in situ GISAXS measurements

  Fritz-Popovski, G., Bodner, S. C., Sosada-Ludwikowska, F., Maier, G. A., Morak, R., Chitu, L., Bruegemann, L., Lange, J., Krane, H. G. & Paris, O., 5 Mar 2018, In: Review of scientific instruments. 89.2018, 3, 035103.

  Research output: Contribution to journal › Article › Research › peer-review
  4 Citations (Scopus)

• Combinatorial study of process parameters, microstructure and mechanical properties in Inconel 718 parts produced by additive manufacturing

  Bodner, S., 2018, 62 p.

  Research output: Thesis › Master's Thesis

  Open Access

  File
  67 Downloads (Pure)
• 2015

  Kinetics and mechanism of the biodegradation of PLA/clay nanocomposites during thermophilic phase of composting process

  Stloukal, P., Pekarova, S., Kalendova, A., Mattausch, H., Laske, S., Holzer, C., Chitu, L., Bodner, S., Maier, G., Slouf, M. & Koutny, M., 2015, In: Waste management. 42, p. 31-40 10 p.

  Research output: Contribution to journal › Article › Research › peer-review
  56 Citations (Scopus)