Pogatscher Stefan

Search results

• 2024

  Einfluss verschiedener Zwischenglühstrategien auf die Biegeeigenschaften von Al-Mg-Si-Fe-Legierungen

  Translated title of the contribution: Influence of different intermediate annealing strategies on the bending properties of Al-Mg-Si-Fe-alloysMutschlechner, S., 2024

  Research output: Thesis › Master's Thesis
• 2023

  Dispersoid Formation and Distribution in AA7050 Aluminum Ingots

  Honaramooz, M. T., 2023

  Research output: Thesis › Doctoral Thesis

• Einfluss des Kaltwalzens auf die Mikrostrukturentwicklung und das resultierende Entfestigungsverhalten von AA 8079-Folienvorwalzband

  Translated title of the contribution: Influence of cold rolling on microstructure development and the resulting softening behavior of AA 8079 foil-stockCuic, B., 2023

  Research output: Thesis › Master's Thesis

• Entwicklung einer hochfesten, gut verformbaren 6xxx-Automobillegierung

  Translated title of the contribution: Development of a high strength, good formable 6xxx automotive alloyGrömer, M. C., 2023

  Research output: Thesis › Master's Thesis

• Exploration of phase transformations in lightweight structural materials by means of in situ high-energy X-ray methods

  Graf, G., 2023

  Research output: Thesis › Doctoral Thesis

• Forming behavior of Ca containing Mg alloys

  Papenberg, N. P., 2023

  Research output: Thesis › Doctoral Thesis

  Open Access

  File
  36 Downloads (Pure)

• High precision measurements on metallic systems using Fast Scanning Calorimetry

  Quick, C., 2023

  Research output: Thesis › Doctoral Thesis

  Open Access

  File
  171 Downloads (Pure)

• Influence of trace solutes on the grain refinement and modification of Al-Si based alloys

  Spáčil, I., 2023

  Research output: Thesis › Doctoral Thesis

  Open Access

  File
  34 Downloads (Pure)

• Link between Microstructure and Fracture Mechanical Properties of Scandium-modified Aluminium Alloys

  Schimbäck, D., 2023

  Research output: Thesis › Doctoral Thesis

• Nanometallurgy of nonferrous metals

  Santa Rosa Coradini, D., 2023

  Research output: Thesis › Doctoral Thesis

  Open Access

  File
  33 Downloads (Pure)

• Process-structure-property relationships of β-NiAl and η-Ni3Ti strengthened Co-free maraging steels

  Zeisl, S., 2023

  Research output: Thesis › Doctoral Thesis

  Open Access

  File
  134 Downloads (Pure)
• 2022

  Adaptierung einer induktiv beheizten Stranggussanlage für Al-Legierungen

  Translated title of the contribution: Adaptation of an inductively heated continuous casting plant for Aluminium alloysWeidinger, A., 2022, 162 p.

  Research output: Thesis › Master's Thesis

• Evaluierung der Anwendbarkeit von KI-Software zur Entwicklung von recyclingtoleranten Aluminium-Legierungen

  Translated title of the contribution: Evaluating the applicability of AI software for the development of recycling-tolerant aluminium alloysOberhumer, M., 2022

  Research output: Thesis › Master's Thesis
• 2021

  Alloying- and process-controlled texture and microstructure engineering in aluminum alloys

  Grasserbauer, J., 2021

  Research output: Thesis › Doctoral Thesis

  Open Access

  File
  518 Downloads (Pure)

• Crossover alloys: a new approach for future aluminum alloys

  Stemper, L., 2021

  Research output: Thesis › Doctoral Thesis

• Einfluss der Clusterbildung auf die Aushärtung und das Umformverhalten von verschiedenen Aluminiumlegierungen

  Translated title of the contribution: Effect of cluster formation on age hardening and forming behavior of various aluminum alloysAster, P., 2021

  Research output: Thesis › Master's Thesis

• Enhanced Characterization of Non-Metallic Inclusions for (Sub) Micro Steel Cleanness Evaluations

  Mayerhofer, A., 2021

  Research output: Thesis › Doctoral Thesis

  Open Access

  File
  721 Downloads (Pure)

• Heat treatment optimization and advanced alloy design for enhanced mechanical properties of AlMgSi alloys

  Schmid, F., 2021

  Research output: Thesis › Doctoral Thesis

• Nachhaltige recyclingbezogene Aluminium-Legierungen

  Translated title of the contribution: Sustainable recycling-related aluminum alloysKrall, P., 2021

  Research output: Thesis › Master's Thesis

• Optimierung der Stabilisierung im System Al-Mg-Si nach dem Strangpressen

  Translated title of the contribution: Optimization of pre-aging in the Al-Mg-Si system after extrusionOrtner, P., 2021

  Research output: Thesis › Master's Thesis

  Open Access

  File
  22 Downloads (Pure)

• Schwingfestigkeitsprüfung von Al-Legierungen bei erhöhten Temperaturen zur Anwendung im Fahrwerksbereich für Motorsport und Hypercars

  Translated title of the contribution: Fatigue testing of aluminum alloys at elevated temperatures for suspension parts in motorsport and hypercarsMartinelli, M. H., 2021

  Research output: Thesis › Master's Thesis

  Open Access

  File
  1118 Downloads (Pure)
• 2020

  Einfluss der Oberflächenzusammensetzung auf die Biegeeigenschaften einer Al–Mg–Si-Legierung

  Translated title of the contribution: Influence of the surface composition on the bending properties of an Al–Mg–Si alloyFauland, L., 2020

  Research output: Thesis › Master's Thesis

• Fatigue strength assessment of heterogeneously textured sand-cast aluminium surface layers

  Pomberger, S., 2020

  Research output: Thesis › Doctoral Thesis

• Mikrostrukturelle Charakterisierung einer Mg-Al-Ca-Mn-Legierung bei der Herstellung von Schmiedeteilen

  Translated title of the contribution: Microstructural characterization of a Mg-Al-Ca-Mn alloy for forging applicationsTrink, B., 2020

  Research output: Thesis › Master's Thesis

  Open Access

  File
  363 Downloads (Pure)

• Optimierung der Kombination von Festigkeit und Leitfähigkeit von Al-Legierungen in der Freileitungstechnik

  Translated title of the contribution: Optimisation of the combination of strength and conductivity of Al alloys in overhead line technologyWillenshofer, P., 2020

  Research output: Thesis › Master's Thesis

  Open Access

  File
  1596 Downloads (Pure)

• Optimization of Al-Mg and Al-Mg-Si alloys for cryogenic deformation

  Gruber, B., 2020

  Research output: Thesis › Doctoral Thesis

• Untersuchung des Erstarrungsverhaltens Zr-legierter Al-Mg-Si-Legierungen

  Translated title of the contribution: Evaluation of the solidification behavior of Zr-alloyed Al-Mg-Si alloysKrivolutskiy, S., 2020

  Research output: Thesis › Master's Thesis
• 2019

  Auswirkung der Tieftemperaturumformung auf die Aushärtungskinetik von AlMgSi- Legierungen

  Translated title of the contribution: Effect of low temperature deformation on the age-hardening kinetics of AlMgSi alloysJeglitsch, L., 2019

  Research output: Thesis › Master's Thesis

  Open Access

  File
  1057 Downloads (Pure)

• Clustering and diffusion in aluminium alloys

  Dumitraschkewitz, P., 2019

  Research output: Thesis › Doctoral Thesis

  Open Access

  File
  394 Downloads (Pure)

• Einfluss von Wärmebehandlungen auf statische und dynamische Eigenschaften sowie das Korrosionsverhalten von Al-Legierungen

  Translated title of the contribution: Influence of heat treatments on static and dynamic properties and the corrosion behavior of Al-alloysGeißler, T., 2019

  Research output: Thesis › Master's Thesis

• Hochauflösende Mikrostrukturuntersuchungen zum Einfluss von Vorauslagerung und Kaltverformung auf die Warmauslagerungskinetik von AlMgSi-Legierungen (EN AW-6016)

  Translated title of the contribution: High-resolution microstructure characterisation on the influence of pre-aging and cold work on AlMgSi-alloys (EN AW-6016)Bergmann, J., 2019

  Research output: Thesis › Master's Thesis

• Mikrostruktur- und Ausscheidungscharakterisierung von Al-Mg-Mn-Legierungen

  Translated title of the contribution: Characterization of microstructure and precipitation in Al-Mg-Mn alloysZwittnig, L., 2019

  Research output: Thesis › Master's Thesis

• Neue Aluminiumlegierungen für superplastische Umformoperationen

  Pölzl, J., 2019

  Research output: Thesis › Master's Thesis

• Optimierte AlMgMn-Legierungen für die Anwendungen im Automobilbau

  Translated title of the contribution: Optimized AlMgMn Alloys for Automotive ApplicationsEbenberger, P., 2019

  Research output: Thesis › Doctoral Thesis

  Open Access

  File
  57 Downloads (Pure)
• 2018

  Optimierung der Wärmebehandlung für ausgewählte Legierungen im Al-Mg-Zn-Cu System

  Translated title of the contribution: Optimization of aging treatments in the Al-Mg-Zn-Cu alloy systemMitas, B., 2018

  Research output: Thesis › Master's Thesis
• 2017

  Modifizierte 5xxx-Aluminiumknetlegierungen für den Einsatz als Strukturgusswerkstoff in der Automobilindustrie

  Translated title of the contribution: Modified 5xxx aluminium wrought alloys for application in structural cast components in automotive industryStemper, L., 2017

  Research output: Thesis › Master's Thesis

  Open Access

  File
  2907 Downloads (Pure)

• Optimierung von Aluminium-Knetlegierungen der 7xxx-Serie

  Translated title of the contribution: Optimization of aluminium wrought alloys of the 7xxx seriesKolb, G., 2017

  Research output: Thesis › Doctoral Thesis

  Open Access

  File
  357 Downloads (Pure)
• 2016

  Mechanisms controlling natural aging and its effect on artificial aging in Al-Mg-Si alloys with and without trace element additions

  Werinos, M., 2016

  Research output: Thesis › Doctoral Thesis

  Open Access

  File
  406 Downloads (Pure)
• 2015

  Einfluss von Legierungselementen auf das Eigenschaftsprofil von Aluminium-Knetlegierungen der 7xxx-Serie

  Translated title of the contribution: Influence of alloying elements on the properties of aluminum wrought alloys (7xxx-series)Scheiber, S., 2015

  Research output: Thesis › Master's Thesis

  Open Access

  File
  279 Downloads (Pure)

• Einfluss von Wärmebehandlungen auf das Eigenschaftsprofil von Aluminium-Knetlegierungen der 7xxx-Serie

  Translated title of the contribution: Impact of heat treatment on properties of 7075-aluminium wrought alloysAlf, D., 2015

  Research output: Thesis › Master's Thesis

  Open Access

  File
  1452 Downloads (Pure)
• 2012

  Influence of microalloying elements on the precipitation behavior of Al-Mg-Si alloys

  Werinos, M., 2012, 90 p.

  Research output: Thesis › Diploma Thesis › peer-review

  Open Access

  File
  289 Downloads (Pure)
• 2010

  Lotlegierungen und Verfahrensgrenzen bei der Verzinnung von Kupfer-Flachdrähten

  Translated title of the contribution: Solder alloys and process limitations for tin coating of copper flat wiresReinhart, P. M., 2010, 86 p.

  Research output: Thesis › Master's Thesis