Lube Tanja

Research output

Research output per year 1994 2005 2006 2007 2008 2012 2013 2014 2015 2016 2017 2024

• 67 Article
• 25 Commissioned report
• 23 Chapter
• 20 Poster
• 22 More
  • 15 Conference contribution
  • 4 Presentation
  • 2 Paper
  • 1 Data set/Database

Research output per year

Research output per year

Search results

• 2024

  Fracture toughness of Ca-, Sr-, and Ba-aluminoborosilicate glasses

  Fry, A. L., Krug, C., Ladinger, L., Lube, T., Kim, S. H. & Mauro, J. C., Feb 2024, In: Journal of the American Ceramic Society. 107, 2, p. 830-843 14 p.

  Research output: Contribution to journal › Article › Research › peer-review

  Open Access

• Strength testing of additive manufactured ceramics – A round robin using the CharAM-methodology

  Staudacher, M., Scheithauer, U., Reichel, M., Schwentenwein, M. & Lube, T., 2024, In: Open ceramics. 100557.

  Research output: Contribution to journal › Article › Research › peer-review

  Open Access

• Test Specimen for Strength Testing of Additive Manufactured Ceramics by the VPP Process: the CharAM-Specimen

  Lube, T., Staudacher, M., Scheithauer, U., Schwentenwein, M., Brouczek, D. & Schmid, H., 2024

  Research output: Non-textual form › Data set/Database › Research

  Open Access

• The Ball-on-Three-Balls strength test: Effective volumes and surfaces for Weibull strength scaling

  Staudacher, M., Eggel, A. E., Supancic, P. H. & Lube, T., 2024, In: Journal of the European Ceramic Society. 44.2024, 1, p. 173-183 11 p.

  Research output: Contribution to journal › Article › Research › peer-review

  Open Access

• The ball-on-three-balls strength test: In-situ testing through X-ray radiography and tomography

  Staudacher, M., Pinzón, G., Adrien, J., Lachambre, J., Maire, E., Chevalier, J. & Lube, T., Mar 2024, In: Open ceramics. 17, 100514.

  Research output: Contribution to journal › Article › Research › peer-review

  Open Access
• 2023

  A novel test specimen for strength testing of ceramics for additive manufacturing

  Staudacher, M., Lube, T., Glettler, J., Scheithauer, U. & Schwentenwein, M., 13 Jul 2023, In: Open ceramics. 15, 100410.

  Research output: Contribution to journal › Article › Research › peer-review

  Open Access

• Reply to Quinn GD, Salem JA, Swab JJ. Comment On: Lubauer J, Lohbauer U, Henrich M, Munz M, Lube T, Belli R. Intricacies involving the evaluation of fracture toughness obtained by the surface-crack-in-flexure method. J Am Ceram Soc. 2022;105(12):7582-7599

  Belli, R., Lubauer, J., Lohbauer, U., Henrich, M., Munz, M. & Lube, T., 2023, In: Journal of the American Ceramic Society. p. 6371-6377

  Research output: Contribution to journal › Article › Research › peer-review

  Open Access

• The B3B Strength test

  Staudacher, M., Lube, T. & Supancic, P. H., 30 Mar 2023.

  Research output: Contribution to conference › Poster › Research

• The Ball-on-Ring-test: Enhancing an analytical solution by numerical analysis for elastic deformation and small displacements

  Staudacher, M., Supancic, P. & Lube, T., 16 Aug 2023, In: Journal of the European Ceramic Society. 43.2023, 15, p. 7167-7177 11 p.

  Research output: Contribution to journal › Article › Research › peer-review

  Open Access

• The Ball-on-Three-Balls strength test for discs and plates: Extending and simplifying stress evaluation

  Staudacher, M., Lube, T. & Supancic, P. H., Feb 2023, In: Journal of the European Ceramic Society. 43.2023, 2, p. 648-660 13 p.

  Research output: Contribution to journal › Article › Research › peer-review

  Open Access
• 2022

  Intricacies involving the evaluation of fracture toughness obtained by the surface‐crack‐in‐flexure method

  Lubauer, J., Lohbauer, U., Henrich, M., Munz, M., Lube, T. & Belli, R., 2022, In: Journal of the American Ceramic Society. p. 7582-7599

  Research output: Contribution to journal › Article › Research › peer-review

  Open Access

• Methodik zur mechanischen Charakterisierung additiv gefertig-ter Bauteile als Funktion der Ausrichtung während des Bauprozesses und den daraus resultierenden Oberflächeneigenschaften (CharAM)

  Scheithauer, U., Brouczek, D., Lorenz, N., Lube, T., Reichel, M., Schmid, H., Scholz, S., Schwarzer-Fisher, E., Schwentenwein, M. & Staudacher, M., 2022, Werkstoffe und Bauteile auf dem Prüfstand: Prüftechnik – Kennwertermittlung – Schadensvermeidung: 40. Vortrags- und Diskussionstagung Werkstoffprüfung 2022.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• On the transition of failure control from material-intrinsic defects to defects forming during monotonically increasing and cyclic mechanical loading in WC-Co hard metal at elevated temperature

  Klünsner, T., Lube, T., Pichler, P., Krobath, M., Walch, L., Maier, K., Ecker, W., Marsoner, S., Czettl, C. & Pippan, R., 2022, In: Acta materialia. 235, 118087.

  Research output: Contribution to journal › Article › Research › peer-review

• Stereolithographic 3D printing of ceramics: challenges and opportunities for structural integrity

  Lube, T., Staudacher, M., Hofer, A-K., Schlacher, J. & Bermejo Moratinos, R., 2022, In: Advanced engineering materials. 2200520.

  Research output: Contribution to journal › Article › Research › peer-review

  Open Access

• Stereolithography-based additive manufacturing of polymer-derived SiOC/SiC ceramic composites

  Essmeister, J., Altun, A. A., Staudacher, M., Lube, T., Schwentenwein, M. & Konegger, T., 6 Jun 2022, In: Journal of the European Ceramic Society. p. 5343-5354

  Research output: Contribution to journal › Article › Research › peer-review

  Open Access
• 2021

  Comparison of biaxial strength measured with the Ball-on-Three-Balls- and the Ring-on-Ring-test

  Staudacher, M., Lube, T., Schlacher, J. & Supancic, P., Jun 2021, In: Open ceramics. 6, June, 10 p., 100101.

  Research output: Contribution to journal › Article › Research › peer-review

  Open Access

• Distribution distortion in the statistical analysis of strength data when using multiple specimen batches

  Salem, J. A., Lube, T., Béhar-Lafenêtre, S. & Baker, E. H., 5 Oct 2021, In: Journal of the European Ceramic Society. 42

  Research output: Contribution to journal › Article › Research › peer-review
  1 Downloads (Pure)

• Fracture Toughness Measurement

  Lube, T., 2021, Encyclopedia of Materials: Technical Ceramics and Glasses. Oxford: Elsevier, Vol. 1. p. 762-774

  Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

• Size effect assessment by Weibull’s approach and the coupled criterion

  Doitrand, A., Henry, R., Lube, T. & Meille, S., 10 Sept 2021, In: Engineering Fracture Mechanics. 256, 107979.

  Research output: Contribution to journal › Article › Research › peer-review
• 2020

  Influence of the Infill Orientation on the Properties of Zirconia Parts Produced by Fused Filament Fabrication

  Cano Cano, S., Lube, T., Huber, P., Gallego, A., Naranjo, J. A., Berges, C., Schuschnigg, S., Herranz, G., Kukla, C., Holzer, C. & Gonzalez-Gutierrez, J., 15 Jul 2020, In: Materials. 13.2020, 14, 19 p., 3158.

  Research output: Contribution to journal › Article › Research › peer-review

  Open Access
  11 Citations (Scopus)

• Influence of WC-Co hard metal microstructure on defect density, initiation and propagation kinetics of fatigue cracks starting at intrinsic and artificial defects under a negative stress ratio

  Klünsner, T., Lube, T., Gettinger, C., Walch, L. & Pippan, R., 12 Feb 2020, In: Acta materialia. 188, p. 30-39

  Research output: Contribution to journal › Article › Research › peer-review
  5 Citations (Scopus)

• Strength of additive manufactured alumina

  Schlacher, J., Lube, T., Harrer, W., Mitteramskogler, G., Schwentenwein, M., Danzer, R. & Bermejo, R., 21 Apr 2020, (E-pub ahead of print) In: Journal of the European Ceramic Society. 40.2020, 14, p. 4737-4745 9 p.

  Research output: Contribution to journal › Article › Research › peer-review

  Open Access
  8 Citations (Scopus)
• 2019

  Biaxiale Festigkeitsprüfung von Keramiken

  Supancic, P. H., Lube, T. & Danzer, R., 13 Feb 2019.

  Research output: Contribution to conference › Poster › Research › peer-review

• Fatigue behaviour of WC-Co hard metal under stress ratio and effectively loaded volume relevant to metalworking tool failure

  Klünsner, T., Jonke, M., Supancic, P., Gettinger, C., Krobath, M., Lube, T., Marsoner, S. & Glätzle, J., 4 Jan 2019, In: International Journal of Refractory Metals and Hard Materials. 80, p. 97-103 7 p.

  Research output: Contribution to journal › Article › Research › peer-review
  3 Citations (Scopus)

• Festigkeit von additiv gefertigtem Aluminiumoxid

  Lube, T., Schlacher, J. C., Harrer, W. S., Danzer, R., Mitteramslkogler, G. & Schwentenwein, M., 13 Feb 2019.

  Research output: Contribution to conference › Poster › Research › peer-review

• Fracture toughness of Silicon Nitride Measured by the Surface Crack in Flexure (SCF) Test Method

  Nindhia, T. G. T. & Lube, T., 2019, In: IOP Conference Series: Materials Science and Engineering. 622, 012001.

  Research output: Contribution to journal › Article › Transfer › peer-review

  Open Access

• Single Edge Precrack V-Notched Beam (SEPVNB) Fracture Toughness Testing on Silicon Nitride

  Nindhia, T. G. T. & Lube, T., 2019, Materials science forum. Trans Tech Publications, Vol. 962. p. 205-209 5 p. (Materials Science Forum).

  Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

• Strength of Lithography-Based Alumina

  Schlacher, J. C., Lube, T., Mitteramskogler, G., Schwentenwein, M. & Danzer, R., 9 Sept 2019.

  Research output: Contribution to conference › Poster › Research › peer-review
• 2018

  Corrigendum to "Surface Crack in Tension or in Bending - A Reassessment of the Newman and Raju Formula in Respect to Fracture Toughness Measurements in Brittle Materials" [J. Eur. Ceram. Soc. 32 (8) (2012) 1491–1501]

  Strobl, S., Supancic, P., Lube, T. & Danzer, R., 2018, In: Journal of the European Ceramic Society. p. 355-358 4 p.

  Research output: Contribution to journal › Article › Research › peer-review
  9 Citations (Scopus)

• Fracture Toughness (KIC) of Lithography Based Manufactured Alumina Ceramic

  Nindhia, T. G. T., Schlacher, J. C. & Lube, T., 2018, In: IOP Conference Series: Materials Science and Engineering. 012022.

  Research output: Contribution to journal › Article › Research › peer-review

  Open Access
  2 Citations (Scopus)

• Fracture toughness of silicon nitride balls via thermal shock

  Strobl, S., Adlmann, F. A., Supancic, P., Lube, T., Danzer, R. & Schöppl, O., 2018, In: Journal of the European Ceramic Society. p. 1278–1287

  Research output: Contribution to journal › Article › Research › peer-review
  4 Citations (Scopus)

• Fracture toughness testing of biomedical ceramic-based materials using beams, plates and discs

  Belli, R., Wendler, M., Petschelt, A., Lube, T. & Lohbauer, U., 2018, In: Journal of the European Ceramic Society. 38, 16, p. 5533-5544 12 p.

  Research output: Contribution to journal › Article › Research › peer-review
  27 Citations (Scopus)

• Mechanische Eigenschaften von gedruckten Keramiken

  Lube, T., Schlacher, J., Harrer, W., Danzer, R., Mitteramskogler, G. & Schwentenwein, M., 2018, Praktische Metallographie Sonderband. INVENTUM GmbH, Vol. 52. p. 229-234

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
• 2017

  Additive Fertigung von Keramiken

  Lube, T. & Harrer, W. S., 13 Nov 2017.

  Research output: Contribution to conference › Poster › Transfer

• Chairside CAD/CAM materials. Part 2: flexural strength testing

  Belli, R., Wendler, M., Petschelt, A., Mevec, D., Lube, T., Harrer, W., Danzer, R. & Lohbauer, U., 2017, In: Dental Materials. 33, 1, p. 99-109 11 p.

  Research output: Contribution to journal › Article › Research › peer-review
  155 Citations (Scopus)

• Fractography of zirconia-specimens made using additive manufacturing (LCM) technology

  Harrer, W. S., Schwentenwein, M., Lube, T. & Danzer, R., 2017, In: Journal of the European Ceramic Society. 37, p. 4331-4338

  Research output: Contribution to journal › Article › Research › peer-review

  49 Citations (Scopus)

• Lifetime Prediction of Ceramic Components - A Case Study on Hybrid Rolling Contact

  Khader, I., Rasche, S., Lube, T., Raga, R., Degenhardt, U. & Kailer, A., 2017, In: Engineering Fracture Mechanics. 169, p. 292-308 17 p.

  Research output: Contribution to journal › Article › Research › peer-review
  9 Citations (Scopus)

• Strength behaviour of etched Zerodur®

  Lube, T. & Béhar-Lafenêtre, S., 2017, In: Journal of the European Ceramic Society. 37

  Research output: Contribution to journal › Article › Research › peer-review
  4 Citations (Scopus)

• Strength of Al2O3-Ceramic Produced by the LCM Additive Manufacturing Technology

  Lube, T., Schlacher, J. C., Harrer, W. S., Mitteramskogler, G., Schwentenwein, M. & Danzer, R., 12 Jul 2017.

  Research output: Contribution to conference › Poster › Research › peer-review

• Surface strength of balls made of five structural ceramic materials evaluated with the Notched Ball Test (NBT)

  Strobl, S., Lube, T., Supancic, P., Schöppl, O. & Danzer, R., 2017, In: Journal of the European Ceramic Society. 37, 15, p. 5065-5070 6 p.

  Research output: Contribution to journal › Article › Research › peer-review
  6 Citations (Scopus)
• 2016

  Analysis of the effective thermoelastic properties and stress fields in silicon nitride based on EBSD data

  Othmani, Y., Böhlke, T., Lube, T., Fellmeth, A., Chlup, Z., Colonna, F. & Hashibon, A., 2016, In: Journal of the European Ceramic Society. 36, p. 1109-1125 17 p.

  Research output: Contribution to journal › Article › Research › peer-review
  4 Citations (Scopus)

• A New Fracture Toughness Test for Ceramic Discs and Plates

  Lube, T., Rasche, S. & Nindhia, T. G. T., 2016.

  Research output: Contribution to conference › Poster › Research › peer-review

  File
  163 Downloads (Pure)

• B3B-KIc fracture toughness test – geometric function formulae for semi-elliptical surface cracks in bi-axial bending

  Lube, T., Rasche, S. & Nindhia, T. G. T., 2016, In: Journal of the American Ceramic Society. 99, 1, p. 249–256

  Research output: Contribution to journal › Article › Research › peer-review

• Biaxial strength testing of dental CAD/CAM block materials

  Wendler, M., Belli, R., Petschelt, A., Mevec, D., Harrer, W., Lube, T., Danzer, R. & Lohbauer, U., 2016.

  Research output: Contribution to conference › Poster › Research › peer-review

• Die Messung der Bruchzähigkeit von Keramiken: State of the Art und neue Methoden

  Danzer, R. & Lube, T., 2016.

  Research output: Contribution to conference › Presentation › Research › peer-review

• Fracture toughness of Ceramic Discs and Plates

  Lube, T., Rasche, S. & Nindhia, T. G. T., 2016.

  Research output: Contribution to conference › Poster › Research › peer-review

• Messung der Bruchzähigkeit mit dem B3B-Test

  Lube, T. & Rasche, S., 4 Apr 2016.

  Research output: Contribution to conference › Presentation › Research › peer-review

• Recent Advances on Fast Fracture Strength of Zerodur® for Space Applications

  Béhar-Lafenêtre, S., Lube, T. & Ait-Zaid, S., 2016.

  Research output: Contribution to conference › Presentation › Research › peer-review

• Recent Andvances on Fast Fracture Strength of Zerodur® for Space Applications

  Béhar-Lafenêtre, S., Lube, T. & Ait-Zaid, S., 2016.

  Research output: Contribution to conference › Paper › peer-review
• 2015

  Bruchzähigkeitsmessung an keramischen Scheiben und Platten

  Lube, T., Rasche, S. & Nindhia, T. G. T., 9 Apr 2015.

  Research output: Contribution to conference › Poster › Research

  File
  124 Downloads (Pure)