Find Publications and Theses

Search results

• 2023

  2D elemental mapping of micrometeorites via LA-ICP-tof-MS

  Chernonozhkin, S., Van Acker, T., Van Malderen, S., Goderis, S. & Vanhaecke, F., 2023.

  Research output: Contribution to conference › Abstract

• 2D elemental mapping of micrometeorites via LA-ICP-ToF-MS

  Chernonozhkin, S., Van Acker, T., Van Malderen, S., Goderis, S. & Vanhaecke, F., 31 Jan 2023.

  Research output: Contribution to conference › Poster › Research

  Open Access

• 3D Tomography across the Balmuccia Peridotite, Ivrea Zone, Italy - Project DIVE, phase two

  Pasiecznik, D., Greenwood, A., Hetényi, G. & Bleibinhaus, F., 22 Feb 2023. 1 p.

  Research output: Contribution to conference › Abstract › peer-review

  Open Access

  File
  6 Downloads (Pure)

• Abbrand- und Wirtschaftsanalyse über die Aufarbeitung von Spänen und die Implementierung einer Brikettieranlage am Beispiel Advanced Bearing Materials LLC am Standort Greensburg Indiana USA

  Translated title of the contribution: Burn-up and economic analysis on the reprocessing of chips and the implementation of a briquetting plant using the example of Advanced Bearing Materials LLC at the Greensburg Indiana USA siteAlp, O., 2023

  Research output: Thesis › Master's Thesis

• Ab initio discovery of novel hydride phases in NiTi shape memory alloys

  Paulik, A., 2023

  Research output: Thesis › Master's Thesis

  Open Access

  File
  14 Downloads (Pure)

• A breakage model for DEM based on a probabilistic particle replacement with voronoi fragments

  Denzel, M., Prenner, M. & Sifferlinger, N. A., Apr 2023, Proceedings of the 13th International Comminution Symposium. Minerals Engineering International (MEI)

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• A Breakage Model for Discrete Element Simulations Applied to Iron Ore Sinter

  Denzel, M., 2023

  Research output: Thesis › Doctoral Thesis

  Open Access

  File
  25 Downloads (Pure)

• A close look at recrystallization in recycling tolerant Al-Mg-Si alloys

  Weißensteiner, I., 19 May 2023.

  Research output: Contribution to conference › Poster › Research

• A Comprehensive Review of Fracture Characterization and Its Impact on Oil Production in Naturally Fractured Reservoirs

  Kharrat, R. & Ott, H., 13 Apr 2023, In: Energies : open-access journal of related scientific research, technology development and studies in policy and management. 16.2023, 8, 16 p., 3437.

  Research output: Contribution to journal › Article › Research › peer-review

  Open Access

• A comprehensive study on the metallographic preparation of W-Re samples for high resolution electron-based microscopy

  Sommerauer, M., Clemens, H., Maier-Kiener, V. & Siller, M., 2023, Pract. Metallograp.. Vol. 60. p. 171-186

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Active and passive tracing of non-metallic inclusions in steel using rare earth elements

  Walkner, C., Thiele, K., Michelic, S. K., Meisel, T. C., Ilie, S., Rössler, R. & Prohaska, T., 2 Feb 2023.

  Research output: Contribution to conference › Poster › Research

• Additive Fertigung - Designkriterien und Anwendungen

  Grun, F. & Tittler, M., 2023, Kfz-Symposium 2023: Neue Technologien und Innovationen in der Fahrzeugtechnik XVIII.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Advanced Modeling and Analysis of Electrical Grids for Multi-Energy System Approaches

  Traupmann, A., 2023

  Research output: Thesis › Doctoral Thesis

  Open Access

  File
  8 Downloads (Pure)

• AMAG CrossAlloys® CrossAlloy™.68 – Ausgezeichnete mechanische Eigenschaften bei hohem Fe-Gehalt

  Trink, B., 2023, In: AluReport. 2023, 1, p. 28-31 4 p.

  Research output: Contribution to journal › Article › Research

• A method for calculation of erosion parameters in refractory erosion by melts

  Guarco, J., Vollmann, S., Harmuth, H. & Burhanuddin, B., 2 Jul 2023.

  Research output: Contribution to conference › Presentation › Research

• Anode materials for solid oxide electrolysis cells

  Berger, C. & Egger, A., 13 Jan 2023, High-Temperature Electrolysis: From fundamentals to applications. 1 ed. Bristol, UK: IOP Publishing Ltd., p. 3.1-3.35 35 p.

  Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

• A Numerically Efficient Method to Assess the Elastic–Plastic Strain Energy Density of Notched and Imperfective Cast Steel Components

  Horvath, M., Oberreiter, M. & Stoschka, M., 27 Apr 2023, In: Applied mechanics : open access journal. 4.2023, 2, p. 528-566 39 p.

  Research output: Contribution to journal › Article › Research › peer-review

  Open Access

• Applicability of selected pipe materials for underground storage facilities

  Loder, B., 11 May 2023.

  Research output: Contribution to conference › Poster › Research

• Application of hidden Markov model in production data analysis

  Mirzaei Tashnizi, M., 2023

  Research output: Thesis › Master's Thesis

  Open Access

  File
  11 Downloads (Pure)

• A pyrrole–carbazole photoinitiator for radical and cationic visible light LED photopolymerization

  Li, Y., Shaukat, U., Schlögl, S., Xue, T., Li, J., Nie, J. & Zhu, X., 3 Jan 2023, In: European polymer journal. 182.2023, 3 January, 7 p., 111700.

  Research output: Contribution to journal › Article › Research › peer-review

• A Reinforcement Learning Approach for Real-Time Autonomous Decision-Making in Well Construction

  Keshavarz, S., Vita, P., Rückert, E., Ortner, R. & Thonhauser, G., 19 Jan 2023, Society of Petroleum Engineers - SPE Symposium: Leveraging Artificial Intelligence to Shape the Future of the Energy Industry, AIS 2023. (Society of Petroleum Engineers - SPE Symposium: Leveraging Artificial Intelligence to Shape the Future of the Energy Industry, AIS 2023).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  Open Access

• A Study of Ultrasonic Measurement Technique to Discriminate Fluids

  Lutz, P., 2023

  Research output: Thesis › Master's Thesis

  Open Access

  File
  6 Downloads (Pure)

• A Tabu Search Matheuristic for the Generalized Quadratic Assignment Problem

  Greistorfer, P., Stanek, R. & Maniezzo, V., 23 Feb 2023, Metaheuristics: 14th International Conference, MIC 2022, Syracuse, Italy, July 11–14, 2022, Proceedings. 1 ed. Springer Cham, Vol. 13838. p. 544-553 10 p. (Lecture Notes in Computer Science; vol. 13838).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• A TEM study of a dislocations in the ßo phase of an intermetallic TNM-TiAl alloy

  Molénat, G., Monchoux, J-P., Musi, M., Spörk-Erdely, P., Clemens, H. & Couret, A., 15 Mar 2023, In: Scripta materialia. 226.2023, 15 March, 6 p., 115247.

  Research output: Contribution to journal › Article › Research › peer-review

• Aus Abgas wird Rohstoff: Carbon Capture and Utilization

  Rameshan, C., 11 Jan 2023

  Research output: Non-textual form › Web publication/site › Transfer

• Auswirkungen ternärer Legierungselemente auf die eutektoide Ti-6.4Ni-Legierung für additive Fertigung

  Translated title of the contribution: Effect of Fe and Cr on a eutectoid Ti-6.4Ni alloy developed for wire-arc additive manufacturingPfaffinger, V. M., 2023

  Research output: Thesis › Master's Thesis

• Beitrag der universitären Ausbildung und Forschung zur Reduktion der Unfallzahlen im Bergbau

  Translated title of the contribution: Contribution of University Education and Research to Reducing the Number of Accidents in the Mining SectorSifferlinger, N. A., Haider, K., Mädel, O. & Maier, A., 30 Jan 2023, (E-pub ahead of print) In: Berg- und hüttenmännische Monatshefte : BHM. 168.2023, 2, p. 83-88 6 p.

  Research output: Contribution to journal › Article › Research

  Open Access

• Bestandserhebung des Wartungsaufwandes von Drainagesystemen in Verkehrstunneln

  Translated title of the contribution: Survey of the maintenance expenditure of drainage systems in traffic tunnelsCzerniak, M., 2023

  Research output: Thesis › Master's Thesis

  Open Access

  File
  10 Downloads (Pure)

• Bewertung der Recyclingfähigkeit von Elektroaltgeräten: Ein Praxisbezogenes Modell

  Translated title of the contribution: Assessment of the recyclability of WEEE: A practice related ModelKodon, E., 2023

  Research output: Thesis › Master's Thesis

  Open Access

  File
  8 Downloads (Pure)

• Biomimetic concepts for the optimization of mechanical properties in layered polymeric materials

  Wiener, J., 2023

  Research output: Thesis › Doctoral Thesis

  Open Access

  File
  6 Downloads (Pure)

• Bonding Performance of Surface-Treated Zirconia Cantilevered Resin-Bonded Fixed Dental Prostheses: In Vitro Evaluation and Finite Element Analysis

  Malgaj, T., Papšík, R., Abram, A., Kocjan, A. & Jevnikar, P., 27 Mar 2023, In: Materials. 16, 7, 15 p., 2646.

  Research output: Contribution to journal › Article › Research › peer-review

  Open Access

• Bruchmechanische Betrachtung korrosiver Vorschädigung an Aluminium-Proben

  Translated title of the contribution: Fracture mechanical investigation of pre-corroded aluminium specimensOberreiter, P., 2023

  Research output: Thesis › Master's Thesis

• Can Severe Plastic Deformation Tune Nanocrystallization in Fe-Based Metallic Glasses?

  Antoni, M., Spieckermann, F., Plutta, N., Gammer, C., Kapp, M., Ramasamy, P., Polak, C., Pippan, R., Zehetbauer, M. J. & Eckert, J., 1 Feb 2023, In: Materials. 16.2023, 3, 14 p., 1260.

  Research output: Contribution to journal › Article › Research › peer-review

  Open Access

• Cellulose nanocrystals (CNCs) as a potential additive for improving API class G cement performance: An experimental study

  Elmgerbi, A., Askar, I. A., Fine, A., Thonhauser, G. & Ashena, R., May 2023, In: Natural Gas Industry B.

  Research output: Contribution to journal › Article › Research › peer-review

• CFD Simulation of refractory fingertest including surface tension

  Vollmann, S., Guarco, J., Burhanuddin, B. & Harmuth, H., 11 Apr 2023.

  Research output: Contribution to conference › Presentation › Research

• Chaboche viscoplastic material model for process simulation of additively manufactured Ti-6Al-4 V parts

  Springer, S., Seisenbacher, B., Leitner, M., Grün, F., Gruber, T., Lasnik, M. & Oberwinkler, B., 11 Mar 2023, In: Welding in the world. 67.2023, April, p. 997-1007 11 p.

  Research output: Contribution to journal › Article › Research › peer-review

  Open Access

• Challenges in sample preparation of carbon-rich samples of biogenic, geogenic and technological origin

  Bandoniene, D., Dietrich, V. E., Mukhametzianova, G., Meisel, T. C. & Prohaska, T., 29 Jan 2023.

  Research output: Contribution to conference › Poster › Research › peer-review

• Changes in geotechnical soil parameters due to influence of hydrothermal alteration at the volcano La Soufrière de Guadeloupe

  Langer, K-S., 2023

  Research output: Thesis › Master's Thesis

  Open Access

  File
  5 Downloads (Pure)

• Characterisation of gas cell reactions for 70+ elements using N2O for ICP tandem mass spectrometry measurements

  Lancaster, S., Prohaska, T. & Irrgeher, J., 28 Apr 2023, In: Journal of analytical atomic spectrometry. 38, p. 1135 1145 p.

  Research output: Contribution to journal › Article › Research › peer-review

  Open Access

• Characterization of material interactions of polymers in PV modules

  Barretta, C., 2023

  Research output: Thesis › Doctoral Thesis

  Open Access

  File
  6 Downloads (Pure)

• Characterization of technologically produced carbon (CMP) applied in agriculture

  Abu Zahra, N., Prohaska, T., Bandoniene, D., Fernández Balado, C., Hood-Nowotny, R., Soja, G., Obenaus-Emler, R., Wagner, S. & Puschenreiter, M., 2 Feb 2023.

  Research output: Contribution to conference › Poster › Research

• Characterization of the Anisotropic Behaviour of Inconel 718 Parts Manufactured by Wire Arc Additive Manufacturing

  Hartl, K., Wallis, C., Bielik, M., Curti, P. & Stockinger, M., 21 Apr 2023, Proceedings of the 10th International Symposium on Superalloy 718 and Derivatives. Springer International Publishing, p. 789-805 16 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Characterization of Zr-Containing Dispersoids in Al–Zn–Mg–Cu Alloys by Small-Angle Scattering

  Honaramooz, M., Morak, R., Pogatscher, S., Popovski, G., Kremmer, T., Meisel, T., Österreicher, J. A., Arnoldt, A. & Paris, O., 31 Jan 2023, In: Materials. 16.2023, 3, 13 p., 1213.

  Research output: Contribution to journal › Article › Transfer › peer-review

  Open Access

• Chemisch-mineralogische Beschreibung von Gießpfannenschlacke der voestalpine Stahl Linz GmbH

  Translated title of the contribution: Chemical and mineralogical characterization of ladle slag from voestalpine Linz GmbHFeucht, F., 2023

  Research output: Thesis › Master's Thesis

• Closed-Pore Formation in Oxygen Electrodes for Solid Oxide Electrolysis Cells Investigated by Impedance Spectroscopy

  Krammer, M., Schmid, A., Nenning, A., Bumberger, A. E., Siebenhofer, M., Herzig, C., Limbeck, A., Rameshan, C., Kubicek, M. & Fleig, J., 2 Feb 2023, In: ACS Applied Materials and Interfaces. 15.2023, 6, p. 8076–8092 7 p.

  Research output: Contribution to journal › Article › Research › peer-review

  Open Access

• Coaly and lacustrine hydrocarbon source rocks in Permo-Carboniferous graben deposits (Weiach well, Northern Switzerland)

  Ajuaba, S., Sachsenhofer, R. F., Meier, V., Groß, D., Schnyder, J., Omodeo-Salé, S., Moscariello, A. & Misch, D., Apr 2023, In: Marine and petroleum geology. 150.2023, April, 26 p., 106147.

  Research output: Contribution to journal › Article › Research › peer-review

  Open Access

• Combining lab-based NAP-XPS with impedance spectroscopy: Characterizing novel catalysts for CO2 activation

  Schrenk, F., Melcher, C., Nenning, A., Opitz, A. K. & Rameshan, C., 7 May 2023.

  Research output: Contribution to conference › Poster › Research

• Combining lab-based NAP-XPS with impedance spectroscopy: Characterizing novel catalysts for CO2 activation

  Schrenk, F., Rameshan, C., Melcher, C., Nenning, A. & Opitz, A. K., 7 May 2023, Book of Abstracts. p. 73-73 1 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Comparing crack density and dissipated energy as measures for off-axis damage in composite laminates

  Drvoderic, M., Gfrerrer, M., Wiener, J., Pinter, G. G., Pletz, M. & Schuecker, C., Apr 2023, In: International Journal of Fatigue. 169.2023, April, 10 p., 107486.

  Research output: Contribution to journal › Article › Research › peer-review

  Open Access

• Comparison of methods for characterising the steel cleanness in powder metallurgical high-speed steels

  Schickbichler, M., Ramesh Babu, S., Hafok, M., Turk, C., Schneeberger, G., Fölzer, A. & Michelic, S. K., 29 Jan 2023, In: Powder Metallurgy. 2023, ??? Stand: 21. April 2023, 17 p.

  Research output: Contribution to journal › Article › Research › peer-review

  Open Access