Find Publications and Theses

Search results

• 2025

  20 kHz X-ray diffraction on Cu thin films explores thermomechanical fatigue at high strain-rates

  Ziegelwanger, T., Reisinger, M., Vedad, B., Hlushko, K., Van Petegem, S., Todt, J., Meindlhumer, M. & Keckes, J., 31 Jan 2025, In: Materials and Design. 251.2025, March, 9 p., 113664.

  Research output: Contribution to journal › Article › Research › peer-review

  Open Access

• 3D multi-site hydrogen evolution reaction catalysts on nanoimprinted surfaces, structured via multi-photon lithography derived masks

  Jelinek, A., Neumüller, D., Gammer, C., Eckert, J. & Kiener, D., 5 Mar 2025, In: Materials and Design. 252.2025, April, 113809.

  Research output: Contribution to journal › Article › Research › peer-review

  Open Access

  File
  72 Downloads (Pure)

• 3D printing of carbon nanotube-based electrofluids

  Thomas, J., 2025

  Research output: Thesis › Master's Thesis

• Ab-initio grain boundary thermodynamics beyond the dilute limit

  Spitaler, T., Scheiber, D., Dösinger, C. A., Hodapp, M. & Romaner, L., 14 Jan 2025, In: Acta materialia. 286.2025, 1 March, 13 p., 120725.

  Research output: Contribution to journal › Article › Research › peer-review

  Open Access

• Accurate prediction of structural and mechanical properties on amorphous materials enabled through machine-learning potentials: A case study of silicon nitride

  Nayak, G. K., Srinivasan, P., Todt, J., Daniel, R., Nicolini, P. & Holec, D., 6 Jan 2025, In: Computational materials science. 249.2025, 5 February, 11 p., 113629.

  Research output: Contribution to journal › Article › Research › peer-review

  Open Access

• A Comprehensive Methodological Approach Towards the Micromechanical Characterization of Lead-Free Solder Joints

  Buchebner, N., Keckes, J. F., Maier-Kiener, V., Imrich, P. J. & Kiener, D., 20 Mar 2025, In: JOM. 77.2025, 5, p. 3526-3541 16 p., 108726.

  Research output: Contribution to journal › Article › Research › peer-review

  Open Access

  File
  67 Downloads (Pure)

• A comprehensive study on thermoplastic elastomers for additive manufacturing of leg prosthesis

  Varsavas, S. D., Michalec, P. & Arbeiter, F., Jul 2025, In: Next Materials. 8.2025, July, 100700.

  Research output: Contribution to journal › Article › Research › peer-review

  Open Access

• Adaptation of a Slow Strain Rate Test Method for Highly Hydrogen Resistant Austenitic Stainless Steels

  Pichler, S., 2025

  Research output: Thesis › Master's Thesis

• Additive manufacturing of a crack-free tool steel with high C and Cr contents: Microstructure and mechanical properties

  Ofner, N., Bodner, S., Meindlhumer, M., Asci, A., Kutlesa, K., Höbenreich, P., Aumayr, C., Wu, L., Turk, C. & Keckes, J., 13 Mar 2025, In: Materials characterization. 223.2025, May, 11 p., 114919.

  Research output: Contribution to journal › Article › Research › peer-review

  Open Access

• A Dexterous Multi-Finger Robotic Manipulator Framework for Intuitive Teleoperation and Contact-Rich Imitation Learning

  Fritze, C., 2025

  Research output: Thesis › Master's Thesis

  Open Access

  File
  75 Downloads (Pure)

• Advanced nanoindentation testing: Beyond the Oliver–Pharr method

  Maier-Kiener, V. & Korte-Kerzel, S., 2025, In: MRS Bulletin. 2025, 50, p. 1-6

  Research output: Contribution to journal › Article › Research › peer-review

• Advanced Tactile Sensor Solution with Spline Surface Interpolation for Robotics

  Kammerhofer, T., Ninevski, D. & Thurner, T., 19 May 2025.

  Research output: Contribution to conference › Paper › peer-review

• A Framework for Exploratory Analysis of Multivariate Time-Series Data Emanating from Batch Processes

  Khalili, N., 2025

  Research output: Thesis › Doctoral Thesis

• A high-throughput framework for pile-up correction in high-speed nanoindentation maps

  Rossi, E., Duranti, D., Rashid, S., Zitek, M., Daniel, R. & Sebastiani, M., 11 Feb 2025, In: Materials and Design. 251.2025, March, 18 p., 113708.

  Research output: Contribution to journal › Article › Research › peer-review

  Open Access

• A Hybrid Update of the Fe-Si System by DSC, Thermodynamic Modeling and Statistical Learning from Ladle Refining Data of Electrical Steels

  Bernhard, M. C., Kavic, D., Presoly, P., Wi, T.-G., Park, W.-B., Rössler, R., Jungreithmeier, A., Ilie, S., Bernhard, C. & Kang, Y.-B., 26 Feb 2025, In: Metallurgical and materials transactions. B, Process metallurgy and materials processing science. 56.2025, 3, p. 2249-2276 28 p.

  Research output: Contribution to journal › Article › Research › peer-review

  Open Access

• Alteration Processes as Exploration Parameter for Lead-Zinc Ores in the Graz Paleozoic

  Rohrhofer, S., 2025

  Research output: Thesis › Master's Thesis

  Open Access

  File
  86 Downloads (Pure)

• Altering the optical appearance of carbon reinforced polymers on an intrinsic level using Ag and SiO2

  Haiden, L., Feuchter, M., Brunner, A. J., Pansare, A. V., Barbezat, M., Ravindran, B., Terziyska, V. & Pinter, G., 28 Mar 2025, In: Proceedings of the Institution of Mechanical Engineers. Part L, Journal of materials: Design and applications. 239.2025, 4, p. 733-745 13 p.

  Research output: Contribution to journal › Article › Research › peer-review

• Alternate Sealants to Restore Barrier Integrity

  Aliatakis, K., 2025

  Research output: Thesis › Master's Thesis

• Alternative Energieträger für den Einsatz in der Fördertechnik

  Translated title of the contribution: Alternative energy sources for use in conveyor technologyHauptmann, G., 2025

  Research output: Thesis › Master's Thesis

• AMAG Conducts Industrial Trials with Hydrogen to Advance Decarbonization

  Tichy, S., Büchner, K., Wibner, S., Pucher, P., Prillhofer, B. & Antrekowitsch, H., Jun 2025, In: Light metal age. 2025, June, p. 14-19 5 p.

  Research output: Contribution to journal › Article › Research

• A multiscale investigation of hardening behavior in dispersoid-modified AlZnMg alloys

  Wessely, V., Basu, I., Wheeler, J. M., Schäublin, R. E., Töpfer, U., Gerstl, S. S. A., Pogatscher, S., Uggowitzer, P. J. & Löffler, J. F., May 2025, In: Materials and Design. 253.2025, May, 16 p., 113838.

  Research output: Contribution to journal › Article › Research › peer-review

  Open Access

• Analyse des Reaktions- und Fluchtverhaltens in Straßentunneln unter Berücksichtigung von Gruppeneffekten: Bericht der Bundesanstalt für Straßen- und Verkehrswesen Brücken- und Ingenieurbau Heft B 209

  Thienert, C., Leismann, F., Kaufmann, S., Jenki, M., Stuehler, D., Galler, R. & Wenighofer, R., May 2025, Fachverlag NW in der Carl Ed. Schünemann KG. 213 p.

  Research output: Book/Report › Commissioned report › Research

  File
  80 Downloads (Pure)

• Analyse und Identifikation von Einsparungspotenzialen eines thermochemischen Prozesses zur Aufbereitung von Sekundärrohstoffen

  Translated title of the contribution: Analysis and identification of potential savings in a thermochemical process for the treatment of secondary raw materialsEngelhart, B., 2025

  Research output: Thesis › Master's Thesis

  Open Access

  File
  79 Downloads (Pure)

• Analysing material flows and final fate distribution of spent refractories from steel casting ladles and cement rotary kilns in Europe

  Feucht, F., Moderegger, R., Neuhold, S. & Sedlazeck, K. P., 5 Feb 2025, In: Resources, Conservation and Recycling. 215.2025, April, 9 p., 108158.

  Research output: Contribution to journal › Article › Research › peer-review

  Open Access

• Analysis of ground surface displacements in the period 1995 - 2023 at post-mining areas in the Walbrzych region based on the InSAR time series data

  Albatineh, F., 2025

  Research output: Thesis › Master's Thesis

  Open Access

  File
  80 Downloads (Pure)

• Analysis of Phase-Space and Psychoacoustic Measures for Condition Monitoring of Milling Tools

  Ninevski, D., O'Leary, P., Pisowicz, T., Thaler, J., Hagendorfer, E. J., Neussl, D. & Thurner, T., 28 Mar 2025, In: IEEE transactions on instrumentation and measurement. 74.2025, 10 p., 6503610.

  Research output: Contribution to journal › Article › Research › peer-review

  Open Access

• Ancient speleothem giant preserved in a high-Alpine cave (Dolomites, N Italy): rare insights into the Neogene

  Spötl, C., Koltai, G., Scholger, R., Wang, J., Knipping, M. & Cheng, H., 2025.

  Research output: Contribution to conference › Abstract › peer-review

  Open Access

• A New Approach Using Multi-Layer Films from Food Waste as a Shrink Film

  Plevová, K., Feuchter, M., Wild, N. & Resch-Fauster, K., 17 Feb 2025, In: Processes. 13.2025, 2, 16 p., 560.

  Research output: Contribution to journal › Article › Research › peer-review

  Open Access

• A post-ophiolitic plutonism record in the Central-East Iranian Microcontinent: Evidence for Pre-Eocene age of Neo-Tethys subduction

  Ghadirpour, M., Torabi, G., Shirdashtzadeh, N., Meisel, T. C. & Morishita, T., 4 Apr 2025, In: Journal of African earth sciences. 228.2025, August, 14 p., 105628.

  Research output: Contribution to journal › Article › Research › peer-review

• Application of coupled CFD-DEM modelling in erosion study of cohesive materials: A case study of rotating finger test

  Rahimilarki, M., Burhanuddin, B., Vollmann, S., Jin, S. & Harmuth, H., 23 Jan 2025, In: Results in Engineering. 25.2025, March, 14 p.

  Research output: Contribution to journal › Article › Research › peer-review

  Open Access

• Application of high-temperature confocal scanning laser microscopy to investigate non-metallic inclusions in steel: a review

  Preißer, N., Wang, Y., Cejka, J., Gruber, I., Mu, W. & Michelic, S. K., 11 Feb 2025, In: Journal of iron and steel research international. 32.2025, 2, p. 334-352 19 p., 111030.

  Research output: Contribution to journal › Review article › peer-review

  Open Access

• A Predictive Framework for Understanding Multidimensional Security Perceptions Among Students in Serbia: The Role of Institutional, Socio-Economic, and Demographic Determinants of Sustainability

  Cvetković, V., Lipovac, M., Renner, R., Stanarević, S. & Raonic, Z., 30 May 2025, In: Sustainability. 17.2025, 11, 50 p., 5030.

  Research output: Contribution to journal › Article › Research › peer-review

  Open Access

• A quality-by-design inspired approach to develop PET and PP nanoplastic test materials for use in in vitro and in vivo biological assays

  Wimmer, L., Hoang, M. V. N., Schwarzinger, J., Jovanovic, V., Anđelković, B., Velickovic, T. C., Meisel, T. C., Waniek, T., Weimann, C., Altmann, K. & Dailey, L. A., 1 Apr 2025, In: Environmental Science: Nano. 12.2025, 5, p. 2667-2686 20 p.

  Research output: Contribution to journal › Article › Research › peer-review

  Open Access

• Assessing the Potential of Advanced Sensor Technologies and IoT in Predicting Downhole Drilling Issues

  Elmgerbi, A. & Thonhauser, G., 22 Apr 2025, Assessing the Potential of Advanced Sensor Technologies and IoT in Predicting Downhole Drilling Issues. Society of Petroleum Engineers (SPE), (Society of Petroleum Engineers - GOTECH 2025).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  Open Access

• Assessment of measures to reduce corporate carbon emissions along the production and energy processes

  Feichtinger, G., Mark, D. & Posch, W., 26 Feb 2025, Organisation und Dynamik von Energiemärkten und Investitionen in Infrastrukturen: Balance zwischen langfristigen Klimazielen und aktuellen Realitäten. p. 1 19 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  Open Access

• Assessment of the suitability of an existing L360NB natural gas pipeline for hydrogen transport using the hollow specimen technique

  Ahmed Hamed Mahmoud Eid Gouda, A. H. M. E. G., Beschliesser, M., Fink, S. & Mori, G. K., 20 May 2025, In: Journal of Materials Research and Technology. 36.2025, May-June, p. 8942-8952 11 p.

  Research output: Contribution to journal › Article › Research › peer-review

  Open Access

• A Study on Femtosecond Laser Ablation and Fracture Toughness of Silicon Nitride Ceramics

  Krug, C., 2025

  Research output: Thesis › Master's Thesis

  Open Access

  File
  63 Downloads (Pure)

• A sustainable multi-megawatt infrastructure concept

  Makoschitz, M., 8 May 2025.

  Research output: Contribution to conference › Poster › Research

• Atomistic Insights into Ion-Driven Interactions of Calcite/ Carbonated Brine/Polar Model Oil: Implications for Carbonated Smart Waterflooding

  Mirzaalian Dastjerdi, A., Kharrat, R., Niaser, V. & Ott, H., 2025, In: Journal of the American Chemical Society.

  Research output: Contribution to journal › Article › Research › peer-review

• Aufbereitungstechnische Rohgutcharakterisierung und Laboruntersuchungen an Flusssedimenten der Donau

  Translated title of the contribution: Evaluation of the Processability of Danube River SedimentsZussner, S., 2025

  Research output: Thesis › Master's Thesis

• Aufbereitungstechnische Untersuchungen an Flussspat-Proben mit Fokus auf die Schweißelektrodenfertigung

  Translated title of the contribution: Processing tests on fluorspar samples with a focus on welding electrode productionWisiak, K., 2025

  Research output: Thesis › Master's Thesis

• Automation of magnetic measurements in an experimental induction furnace

  Röthl, H., 2025

  Research output: Thesis › Master's Thesis

• Benchmarking of standards

  Akpinar, N., 2025

  Research output: Thesis › Master's Thesis

  Open Access

  File
  18 Downloads (Pure)

• Biochemical Reaction modelling considering biomass growth in Underground Hydrogen Storage in Porous Media

  Mitulescu, S., 2025

  Research output: Thesis › Master's Thesis

  Open Access

  File
  16 Downloads (Pure)

• BLE based Audio Platform for Condition Monitoring Applications

  Gamauf, M., 2025

  Research output: Thesis › Master's Thesis

  Open Access

  File
  6 Downloads (Pure)

• Bruchzähigkeitsmessung mittels Femtosekunden-Laserablation

  Munz, M., Krug, C. & Lube, T., 26 Feb 2025.

  Research output: Contribution to conference › Poster › Transfer › peer-review

• CaCTUS – Carbon Capture & Transformation, Utilization and Storage: CCUS in Österreich – Potenziale, Technologien, Folgenabschätzung und Einordnung der rechtlichen Rahmenbedingungen

  Wolf-Zöllner, P., Böhm, H., Veseli , A., Hochmeister, S., Kulich, J., Fazeni-Fraisl , K., Lehner, M., Kienberger, T., Ott, H., Fleischhacker, J., Sachs, N. & Kapfer, M., 7 Mar 2025, In: Berg- und hüttenmännische Monatshefte : BHM. 170.2025, 4, p. 230-237 8 p.

  Research output: Contribution to journal › Article › Research

  Open Access

• Chalcones as Wavelength-Selective Cross-Linkers: Multimaterial Additive Manufacturing of Macro- and Microscopic Soft Active Devices

  Müller, S. M., Nelson, B. R., Höller, R., Waly, C., Jelinek, A., Kirkpatrick, B. E., Keyser, S. P., Naderer, C., Sivun, D., Jacak, J., Anseth, K. S., Bowman, C. N., Schlögl, S. & Griesser, T., 3 Apr 2025, In: Chemistry of materials. 37.2025, 8, p. 2699-2708 10 p.

  Research output: Contribution to journal › Article › Research › peer-review

• Characterization of High-Speed Steels—Experimental Data and Their Evaluation Supported by Machine Learning Algorithms

  Wießner, M. & Gamsjäger, E., 12 Feb 2025, In: Metals : open access journal . 15.2025, 2, 28 p., 194.

  Research output: Contribution to journal › Article › Research › peer-review

  Open Access

• Charakterisierung des Clogging-Layer-Aufbaus im Eintauchausguss mit unterschiedlichen Tracer-Elementen

  Translated title of the contribution: Study of clogging layer build-up in the SEN by means of diverse tracing elementsWolz, M., 2025

  Research output: Thesis › Master's Thesis