Calculation Accuracy and Efficiency of a Transient Model for Submerged Entry Nozzle Clogging

Research output: Contribution to journalArticleResearchpeer-review

8 Citations (Scopus)

Abstract

A transient numerical model was proposed and validated by the current authors for nozzle clogging (Barati et al. in Powder Technol 329:181-98, 2018). The model can reproduce the experiment in pilot scale satisfactorily. In the present article, the main objective is to validate the model for application in industry process continuous casting of steel, referring to the model accuracy and calculation efficiency. The results have shown that for the complex geometry of submerged entry nozzle (SEN), where it is difficult to create hexahedron mesh in the entire domain, a mixed mesh type is recommended, i.e., the wedge mesh for regions adjacent to SEN walls and the tetrahedron mesh for inner regions. Another challenge to the calculation of real SEN clogging is the huge number of particles involved in the industry process. An artificial factor, the N-factor, has to be introduced to reduce the calculation cost. A dimensionless number (α) is defined to limit the N-factor and ensure the modeling accuracy. Simulation of a test case has indicated that by an appropriate N-factor (1000, corresponding to α = 6 × 10 −5 ), the calculation time would be reduced significantly to a reasonable time.

Original languageEnglish
Pages (from-to)1429-1443
Number of pages15
JournalMetallurgical and Materials Transactions B: Process Metallurgy and Materials Processing Science
Volume50.2019
Issue number3
DOIs
Publication statusPublished - 2019

Cite this