Conceptual Design of Drilling Cuttings Analysis System Based on Machine Learning Techniques

Pavel Iastrebov

Research output: ThesisMaster's Thesis

440 Downloads (Pure)

Abstract

Analyzing return cuttings during drilling is one of the opportunities, besides core analysis, to observe and characterize the drilled rock. It gives real time information needed for bit depth correction and lithology correlation, such as rock type, color, texture (grain size, shape and sorting), cement amount, fossils presence, porosity and permeability. Correct measurements of those parameters (shape and size distribution in particular) improves the drilling performance and anticipates possible problems and complications. Cuttings and cavings presence in annular space increase the Equivalent Circulating Density (ECD), which leads to higher pressure losses; they are also one of the causes of Rate of Penetration (ROP) reduction because of chip hold down effect. Their shape is the inference for probable causes of borehole instability and quality of the mud cake. Several techniques have been used in last decades for obtaining the return cuttings parameters, such as their relative amount, particle size distribution (PSD), size and shape. They comprise state of the art technology based on computer vision techniques with machine learning algorithms as a software. A number of such techniques is already available on the market, and have their limitations and advantages. Basing on this principle, OMV is planning to build in house intelligent and cost-effective system which is capable of determining the cuttings parameters in real time. The built system should be feasible from the point of proactive problem prevention, reduction of Non-productive Time (NPT) by well complications mitigation and simplification of tedious mud-logger labor. After carefully reviewing and studying the shortcomings of the recent techniques regarding cavings analysis, a conceptual design of automated cavings analysis technology is proposed in this thesis. The system is split into hardware and software parts. The first part includes circulation system for washing the cavings, as well as the camera and lightning facility. The camera is connected to the laptop with running software in the background, which is based on the Convolutional Neural Network (CNN). This algorithm analyzes the captured frames and delivers cavings’ shape, size and lithology as an output. Furthermore, feasibility study is conducted, in which rough costs of the proposed system are estimated.
Translated title of the contributionKonzeption eines Bohrschlamm-Analysesystems basierend auf maschinellen Lerntechniken
Original languageEnglish
QualificationDipl.-Ing.
Awarding Institution
  • Montanuniversität
Supervisors/Advisors
  • Kucs, Richard, Co-Supervisor (external), External person
  • Elmgerbi, Asad, Co-Supervisor (internal)
  • Arhipov, Alexey, Supervisor (external), External person
  • Thonhauser, Gerhard, Supervisor (internal)
Award date22 Sept 2020
Publication statusPublished - 2020

Bibliographical note

embargoed until null

Keywords

  • drilling
  • cuttings
  • machine learning
  • NPT
  • neural network
  • complication
  • instability
  • geomechanics
  • computer vision

Cite this