Debinding behaviour of feedstock for material extrusion additive manufacturing of zirconia

Christian Kukla, Santiago Cano Cano, Dario Kaylani, Stephan Schuschnigg, Clemens Holzer, Joamin Gonzalez-Gutierrez

Research output: Contribution to journalArticleResearchpeer-review

9 Citations (Scopus)


Material Extrusion Additive Manufacturing (MEAM) is mainly used for the production of polymeric components. Using feedstocks similar to those of powder injection moulding, MEAM of ceramic components is possible. MEAM with filaments is also called Fused Filament Fabrication. Feedstocks are used as filaments; this imposes new requirements such as flexibility for spooling, stiffness to avoid buckling and constant diameter to ensure a consistent mass flow. Additionally, the binder should be removed without damaging the shaped part. In this paper, the debinding behaviour of MEAM feedstocks with zirconia was investigated. It was observed that higher temperature increases the debinding rate, but cracks occurred; the addition of a surfactant speeds up the debinding rate and reduces cracks; and a mixture of 10% isopropanol and 90% cyclohexane initially decreases swelling during debinding, but the debinding rate and the appearance of cracks is unaffected.

Original languageEnglish
Number of pages9
JournalPowder Metallurgy
Publication statusPublished - 15 May 2019


  • debinding
  • Additive Manufacturing
  • Material Extrusion
  • Zirconia

Cite this