Skip to main navigation Skip to search Skip to main content

Effect of visbreaking on the Molecular Weight Distribution and Long-term Performance of Polypropylene Homopolymers

  • Marina Balestriere

Research output: Thesis › Master's Thesis

Abstract

Visbreaking is a post-reactor operation involving the controlled scission of polymer chains to achieve specific molecular weight distributions and melt flow rates (MFR). It is commonly used to adjust the rheological properties of commercial-grade polypropylene (PP) with wide molecular weight distributions, enabling its use in specific applications while maintaining cost efficiency. In this study, the effect of visbreaking on four different polypropylene homopolymers was assessed through mechanical and thermo-mechanical tests. After visbreaking, the molecular weight distribution of the materials was shifted to lower values and the polydispersity index was considerably reduced. An increase in the crystallinity of the visbroken materials was also detected as a consequence of the modification. Dynamic-mechanical analysis showed a single relaxation process in the temperature range studied, characterized by a maximum in loss modulus, which corresponds to the glass transition of the PP at 1.7°C - 4.6°C. A slight increase in the storage modulus of the visbroken PP was detected at temperatures above the glass transition temperature, due to the increased crystallinity. Results of strain rate-controlled tests at 23°C and 95°C showed an increase in the yield stress and decrease in the yield strain with an increasing strain rate for all materials. Moreover, visbroken samples showed a higher strain rate sensitivity than non-visbroken ones. The resistance to slow crack growth for the visbroken polymers, determined by cyclic Cracked Round Bar (CRB) tests at 95°C, was reduced by up to an order of magnitude for the same load level, indicating a reduction in the long-term durability. Further characterization of the quasi-brittle behavior revealed that the number of cycles for crack initiation is considerably reduced by the visbreaking. It can be concluded that the molecular changes introduced by the visbreaking process to obtain controlled rheology, affect the mechanical and thermo-mechanical properties of the PP, especially the long-term behavior. Although the increased crystallinity provides higher modulus and yield point, the polymer becomes more brittle and long-term properties are reduced, which can be critical for certain applications.
Translated title of the contributionEinfluss des Visbreaking auf die Molekulargewichtsverteilung und das Langzeitverhalten von Polypropylen-Homopolymeren
Original languageEnglish
QualificationMSc
Awarding Institution
  • Montanuniversität
Supervisors/Advisors
  • Arbeiter, Florian, Supervisor (internal)
Award date19 Dec 2025
Publication statusPublished - 2025

Bibliographical note

embargoed until 30-09-2030

Keywords

  • Polypropylene
  • Visbreaking
  • Fracture-mechanics
  • CRB Test
  • Molecular Weight Distribution

Cite this