Effects of Activator Properties and Curing Conditions on Alkali-Activation of Low-Alumina Mine Tailings

Mahroo Falah, Robert Obenaus-Emler, Paivo Kinnunen, Mirja Illikainen

Research output: Contribution to journalArticleResearchpeer-review

18 Citations (Scopus)

Abstract

The mining industry generates a notable amount of mine tailings (MTs). Disposal of MTs creates environmental impacts such as air pollution and the release of heavy metals into surface and underground water. The European Union (EU)-funded project “Integrated mineral technologies for more sustainable raw material supply” (ITERAMS) includes an effort to produce eco-friendly backfill materials to enhance operation and mine safety and covers for surface deposits of tailings based on geopolymerization technology. This paper investigates the effects of activator concentration, curing temperature and time on alkali-activated materials based on low-alumina MTs from the Cu/Ni mine in Northern Finland. Alkaline activators containing sodium silicate solution (Na2SiO3) at different concentrations were used and two different curing temperatures, 40 °C and 60 °C, for periods of 7, 14, and 28 days were considered. Scanning electron microscopy/energy-dispersive X-ray spectroscopy (SEM/EDS) and X-ray diffraction (XRD) were performed to investigate the structure, morphology and phase compositions of the alkali-activated products. The effect of curing temperature and alkaline solutions on mechanical strength and water absorption were investigated. The results indicate that the alkalinity and curing temperature affect the mechanical and microstructural properties of the compositions of alkali-activated MTs. The 30 wt% Na2SiO3 addition enables the alkali activated MT to improve the compressive strength with a highest value of 6.44 and 15.70 MPa after 28 days of curing at 40 °C and 60 °C, respectively. The results of this study deliver useful information for recycling and utilization of MTs as sustainable material through the alkali activation.
Original languageEnglish
Pages (from-to)5027–5039
Number of pages13
Journal Waste and biomass valorization
Volume11.2020
Issue numberSeptember
DOIs
Publication statusPublished - 13 Aug 2019

Bibliographical note

Publisher Copyright: © 2019, The Author(s).

Keywords

  • Mine tailings
  • Alkali-activation
  • Curing condition
  • Mechanical strength
  • Microstructure

Cite this