Electromechanical Behavior of Al/Al2O3 Multilayers on Flexible Substrates: Insights from In Situ Film Stress and Resistance Measurements

Barbara Putz, Thomas E. J. Edwards, Emeze Huszar, Patric A. Gruber, Kevin-Peter Gradwohl, Patrice Kreiml, Daniel Többens, Johann Michler

Research output: Contribution to journalArticleResearchpeer-review


A series of Al and Al/Al2O3 thin-film multilayer structures on flexible polymer substrates are fabricated with a unique deposition chamber combining magnetron sputtering (Al) and atomic layer deposition (ALD, Al2O3, nominal thickness 2.4–9.4 nm) without breaking vacuum and thoroughly characterized using transmission electron microscopy (TEM). The electromechanical behavior of the multilayers and Al reference films is investigated in tension with in situ X-ray diffraction (XRD) and four-point probe resistance measurements. All films exhibit excellent interfacial adhesion, with no delamination in the investigated strain range (12%). For the first time, an adhesion-promoting naturally forming amorphous interlayer is confirmed for thin films sputter deposited onto polymers under laboratory conditions. The evolution of Al film stresses and electrical resistance reveal changes in the deformation behavior as a function of oxide thickness. Strengthening of Al is observed with increasing oxide thickness. Significant embrittlement can be avoided for oxide layer thicknesses ≤2.4 nm.
Original languageEnglish
Article number2200951
Number of pages15
Journal Advanced engineering materials
Publication statusPublished - 2023

Cite this