Influence of Recyclates on Mechanical Properties and Lifetime Performance of Polypropylene Materials

Jessica Hinczica; Mario Messiha; Thomas Koch; Andreas Frank; Gerald Pinter

doi:10.1016/j.prostr.2022.12.017

Influence of Recyclates on Mechanical Properties and Lifetime Performance of Polypropylene Materials

Jessica Hinczica, Mario Messiha, Thomas Koch, Andreas Frank, Gerald Pinter

Chair of Materials Science and Testing of Polymers (210)

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

Original language	English
Title of host publication	23rd European Conference on Fracture, ECF 2022
Editors	Pedro Moreira, Luis Reis
Publisher	Elsevier B.V.
Pages	139-146
Number of pages	8
ISBN (Electronic)	9781713870302
DOIs	https://doi.org/10.1016/j.prostr.2022.12.017
Publication status	Published - 2022
Event	23rd European Conference on Fracture, ECF 2022 - Funchal, Portugal Duration: 27 Jun 2022 → 1 Jul 2022

Publication series

Name	Procedia Structural Integrity
Volume	42
ISSN (Electronic)	2452-3216

Conference

Conference	23rd European Conference on Fracture, ECF 2022
Country/Territory	Portugal
City	Funchal
Period	27/06/22 → 1/07/22

Bibliographical note

Funding Information:
The research work of this paper was performed at the Polymer Competence Center Leoben GmbH (PCCL, Austria) within the framework of the K2 COMET-program of the Federal Ministry for Climate Action, Environment, Energy, Mobility, Innovation and Technology and the Federal Ministry for Digital and Economic Affairs with contributions by DYKA (NL), Fraenkische Rohrwerke Gebr. Kirchner GmbH & Co. KG (GER), Rehau AG & Co. KG (GER), Staatliche Versuchsanstalt - TGM Kunststoff- und Umwelttechnik (AUT), TEPPFA (BE), Pipelife International GmbH (AUT), Polypipe Ltd. (UK), Wavin T&I (NL), Vynova Group (BE) as well as the Technical University Wien (AUT) and Montanuniversitaet Leoben (AUT). The PCCL is funded by the Austrian Government and the State Governments of Styria and Upper Austria.

Funding Information:
The research work of this paper was performed at the Polymer Competence Center Leoben GmbH (PCCL, Austria) within the framework of the K2 COMET-program of the Federal Ministry for Climate Action, Environment, Energy, Mobility, Innovation and Technology and the Federal Ministry for Digital and Economic Affairs with contributions by DYKA (NL), Fraenkische Rohrwerke Gebr. Kirchner GmbH & Co. KG (GER), Rehau AG & Co. KG (GER), Staatliche Versuchsanstalt – TGM Kunststoff-und Umwelttechnik (AUT), TEPPFA (BE), Pipelife International GmbH (AUT), Polypipe Ltd. (UK), Wavin T&I (NL), Vynova Group (BE) as well as the Technical University Wien (AUT) and Montanuniversitaet Leoben (AUT). The PCCL is funded by the Austrian Government and the State Governments of Styria and Upper Austria.

Publisher Copyright:
© 2022 The Authors. Published by Elsevier B.V. This is an open access article under the CC BY-NC-ND license (https://creativecommons.org/licenses/by-nc-nd/4.0) Peer-review under responsibility of the scientific committee of the 23 European Conference on Fracture - ECF23.

Keywords

blends
cracked round bar test
mechanical properties
polypropylene
recyclate
slow crack growth

Access to Document

10.1016/j.prostr.2022.12.017

Cite this

@inproceedings{c9e018d4216f491bac79b2e189c4b2c4,

title = "Influence of Recyclates on Mechanical Properties and Lifetime Performance of Polypropylene Materials",

keywords = "blends, cracked round bar test, mechanical properties, polypropylene, recyclate, slow crack growth",

author = "Jessica Hinczica and Mario Messiha and Thomas Koch and Andreas Frank and Gerald Pinter",

note = "Funding Information: The research work of this paper was performed at the Polymer Competence Center Leoben GmbH (PCCL, Austria) within the framework of the K2 COMET-program of the Federal Ministry for Climate Action, Environment, Energy, Mobility, Innovation and Technology and the Federal Ministry for Digital and Economic Affairs with contributions by DYKA (NL), Fraenkische Rohrwerke Gebr. Kirchner GmbH & Co. KG (GER), Rehau AG & Co. KG (GER), Staatliche Versuchsanstalt - TGM Kunststoff- und Umwelttechnik (AUT), TEPPFA (BE), Pipelife International GmbH (AUT), Polypipe Ltd. (UK), Wavin T&I (NL), Vynova Group (BE) as well as the Technical University Wien (AUT) and Montanuniversitaet Leoben (AUT). The PCCL is funded by the Austrian Government and the State Governments of Styria and Upper Austria. Funding Information: The research work of this paper was performed at the Polymer Competence Center Leoben GmbH (PCCL, Austria) within the framework of the K2 COMET-program of the Federal Ministry for Climate Action, Environment, Energy, Mobility, Innovation and Technology and the Federal Ministry for Digital and Economic Affairs with contributions by DYKA (NL), Fraenkische Rohrwerke Gebr. Kirchner GmbH & Co. KG (GER), Rehau AG & Co. KG (GER), Staatliche Versuchsanstalt – TGM Kunststoff-und Umwelttechnik (AUT), TEPPFA (BE), Pipelife International GmbH (AUT), Polypipe Ltd. (UK), Wavin T&I (NL), Vynova Group (BE) as well as the Technical University Wien (AUT) and Montanuniversitaet Leoben (AUT). The PCCL is funded by the Austrian Government and the State Governments of Styria and Upper Austria. Publisher Copyright: {\textcopyright} 2022 The Authors. Published by Elsevier B.V. This is an open access article under the CC BY-NC-ND license (https://creativecommons.org/licenses/by-nc-nd/4.0) Peer-review under responsibility of the scientific committee of the 23 European Conference on Fracture - ECF23.; 23rd European Conference on Fracture, ECF 2022 ; Conference date: 27-06-2022 Through 01-07-2022",

year = "2022",

doi = "10.1016/j.prostr.2022.12.017",

language = "English",

series = "Procedia Structural Integrity",

publisher = "Elsevier B.V.",

pages = "139--146",

editor = "Pedro Moreira and Luis Reis",

booktitle = "23rd European Conference on Fracture, ECF 2022",

address = "Netherlands",

}

Hinczica, J, Messiha, M, Koch, T, Frank, A & Pinter, G 2022, Influence of Recyclates on Mechanical Properties and Lifetime Performance of Polypropylene Materials. in P Moreira & L Reis (eds), 23rd European Conference on Fracture, ECF 2022. Procedia Structural Integrity, vol. 42, Elsevier B.V., pp. 139-146, 23rd European Conference on Fracture, ECF 2022, Funchal, Portugal, 27/06/22. https://doi.org/10.1016/j.prostr.2022.12.017

Influence of Recyclates on Mechanical Properties and Lifetime Performance of Polypropylene Materials. / Hinczica, Jessica; Messiha, Mario; Koch, Thomas et al.
23rd European Conference on Fracture, ECF 2022. ed. / Pedro Moreira; Luis Reis. Elsevier B.V., 2022. p. 139-146 (Procedia Structural Integrity; Vol. 42).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

TY - GEN

T1 - Influence of Recyclates on Mechanical Properties and Lifetime Performance of Polypropylene Materials

AU - Hinczica, Jessica

AU - Messiha, Mario

AU - Koch, Thomas

AU - Frank, Andreas

AU - Pinter, Gerald

N1 - Funding Information: The research work of this paper was performed at the Polymer Competence Center Leoben GmbH (PCCL, Austria) within the framework of the K2 COMET-program of the Federal Ministry for Climate Action, Environment, Energy, Mobility, Innovation and Technology and the Federal Ministry for Digital and Economic Affairs with contributions by DYKA (NL), Fraenkische Rohrwerke Gebr. Kirchner GmbH & Co. KG (GER), Rehau AG & Co. KG (GER), Staatliche Versuchsanstalt - TGM Kunststoff- und Umwelttechnik (AUT), TEPPFA (BE), Pipelife International GmbH (AUT), Polypipe Ltd. (UK), Wavin T&I (NL), Vynova Group (BE) as well as the Technical University Wien (AUT) and Montanuniversitaet Leoben (AUT). The PCCL is funded by the Austrian Government and the State Governments of Styria and Upper Austria. Funding Information: The research work of this paper was performed at the Polymer Competence Center Leoben GmbH (PCCL, Austria) within the framework of the K2 COMET-program of the Federal Ministry for Climate Action, Environment, Energy, Mobility, Innovation and Technology and the Federal Ministry for Digital and Economic Affairs with contributions by DYKA (NL), Fraenkische Rohrwerke Gebr. Kirchner GmbH & Co. KG (GER), Rehau AG & Co. KG (GER), Staatliche Versuchsanstalt – TGM Kunststoff-und Umwelttechnik (AUT), TEPPFA (BE), Pipelife International GmbH (AUT), Polypipe Ltd. (UK), Wavin T&I (NL), Vynova Group (BE) as well as the Technical University Wien (AUT) and Montanuniversitaet Leoben (AUT). The PCCL is funded by the Austrian Government and the State Governments of Styria and Upper Austria. Publisher Copyright: © 2022 The Authors. Published by Elsevier B.V. This is an open access article under the CC BY-NC-ND license (https://creativecommons.org/licenses/by-nc-nd/4.0) Peer-review under responsibility of the scientific committee of the 23 European Conference on Fracture - ECF23.

PY - 2022

Y1 - 2022

KW - blends

KW - cracked round bar test

KW - mechanical properties

KW - polypropylene

KW - recyclate

KW - slow crack growth

UR - http://www.scopus.com/inward/record.url?scp=85159023095&partnerID=8YFLogxK

U2 - 10.1016/j.prostr.2022.12.017

DO - 10.1016/j.prostr.2022.12.017

M3 - Conference contribution

AN - SCOPUS:85159023095

T3 - Procedia Structural Integrity

SP - 139

EP - 146

BT - 23rd European Conference on Fracture, ECF 2022

A2 - Moreira, Pedro

A2 - Reis, Luis

PB - Elsevier B.V.

T2 - 23rd European Conference on Fracture, ECF 2022

Y2 - 27 June 2022 through 1 July 2022

ER -

Influence of Recyclates on Mechanical Properties and Lifetime Performance of Polypropylene Materials

Publication series

Conference

Bibliographical note

Keywords

Access to Document

Other files and links

Cite this