SHAPING, DEBINDING AND SINTERING OF STEEL COMPONENTS VIA FUSED FILAMENT FABRICATION

Joamin Gonzalez-Gutierrez; Damir  Godec; Christian Kukla; Thomas Schlauf; Carlo Burkhardt; Clemens Holzer

SHAPING, DEBINDING AND SINTERING OF STEEL COMPONENTS VIA FUSED FILAMENT FABRICATION

Joamin Gonzalez-Gutierrez, Damir Godec, Christian Kukla, Thomas Schlauf, Carlo Burkhardt, Clemens Holzer

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

Abstract

An economical alternative for the production of steel parts via additive manufacturing is to combine Fused Filament Fabrication (FFF) with debinding and sintering in a process referred as Shaping, Debinding and Sintering (SDS). In this paper, the SDS process for two types of feedstock materials containing two types steel alloys is described: From feedstock compounding to sintering. It was found that using the same binder system is possible to obtained sintered parts shaped by FFF with these two types of steel alloys.

Original language	English
Title of host publication	16th International Scientific Conference on Production Engineering
Editors	Toma Udiljak
Place of Publication	Zadar, Croatia
Publisher	Croatian Association of Production Engineering
Pages	99
Number of pages	104
Publication status	Published - 8 Jun 2017
Event	International Scientific Conference on Production Engineering: Computer Integrated Manufacturing and High Speed Machining - Hotel Kolovare, Zadar, Croatia Duration: 8 Jun 2017 → 10 Jun 2017 Conference number: 16 http://hups.fsb.hr/

Conference

Conference	International Scientific Conference on Production Engineering
Abbreviated title	CIM
Country/Territory	Croatia
City	Zadar
Period	8/06/17 → 10/06/17
Internet address	http://hups.fsb.hr/

Keywords

Additive manufacturing
debinding
Fused Filament Fabrication
Sintering
Steel

Cite this

@inproceedings{5122fc1e6da0499585f76a047a3de245,

title = "SHAPING, DEBINDING AND SINTERING OF STEEL COMPONENTS VIA FUSED FILAMENT FABRICATION",

abstract = "An economical alternative for the production of steel parts via additive manufacturing is to combine Fused Filament Fabrication (FFF) with debinding and sintering in a process referred as Shaping, Debinding and Sintering (SDS). In this paper, the SDS process for two types of feedstock materials containing two types steel alloys is described: From feedstock compounding to sintering. It was found that using the same binder system is possible to obtained sintered parts shaped by FFF with these two types of steel alloys.",

keywords = "Additive manufacturing, debinding, Fused Filament Fabrication, Sintering, Steel",

author = "Joamin Gonzalez-Gutierrez and Damir Godec and Christian Kukla and Thomas Schlauf and Carlo Burkhardt and Clemens Holzer",

year = "2017",

month = jun,

day = "8",

language = "English",

pages = "99",

editor = "Toma Udiljak",

booktitle = "16th International Scientific Conference on Production Engineering",

publisher = " Croatian Association of Production Engineering",

note = "International Scientific Conference on Production Engineering : Computer Integrated Manufacturing and High Speed Machining, CIM ; Conference date: 08-06-2017 Through 10-06-2017",

url = "http://hups.fsb.hr/",

}

Gonzalez-Gutierrez, J, Godec, D, Kukla, C, Schlauf, T, Burkhardt, C & Holzer, C 2017, SHAPING, DEBINDING AND SINTERING OF STEEL COMPONENTS VIA FUSED FILAMENT FABRICATION. in T Udiljak (ed.), 16th International Scientific Conference on Production Engineering. Croatian Association of Production Engineering, Zadar, Croatia, pp. 99, International Scientific Conference on Production Engineering, Zadar, Croatia, 8/06/17.

SHAPING, DEBINDING AND SINTERING OF STEEL COMPONENTS VIA FUSED FILAMENT FABRICATION. / Gonzalez-Gutierrez, Joamin; Godec, Damir ; Kukla, Christian et al.
16th International Scientific Conference on Production Engineering. ed. / Toma Udiljak. Zadar, Croatia: Croatian Association of Production Engineering, 2017. p. 99.

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

TY - GEN

T1 - SHAPING, DEBINDING AND SINTERING OF STEEL COMPONENTS VIA FUSED FILAMENT FABRICATION

AU - Gonzalez-Gutierrez, Joamin

AU - Godec, Damir

AU - Kukla, Christian

AU - Schlauf, Thomas

AU - Burkhardt, Carlo

AU - Holzer, Clemens

N1 - Conference code: 16

PY - 2017/6/8

Y1 - 2017/6/8

N2 - An economical alternative for the production of steel parts via additive manufacturing is to combine Fused Filament Fabrication (FFF) with debinding and sintering in a process referred as Shaping, Debinding and Sintering (SDS). In this paper, the SDS process for two types of feedstock materials containing two types steel alloys is described: From feedstock compounding to sintering. It was found that using the same binder system is possible to obtained sintered parts shaped by FFF with these two types of steel alloys.

AB - An economical alternative for the production of steel parts via additive manufacturing is to combine Fused Filament Fabrication (FFF) with debinding and sintering in a process referred as Shaping, Debinding and Sintering (SDS). In this paper, the SDS process for two types of feedstock materials containing two types steel alloys is described: From feedstock compounding to sintering. It was found that using the same binder system is possible to obtained sintered parts shaped by FFF with these two types of steel alloys.

KW - Additive manufacturing

KW - debinding

KW - Fused Filament Fabrication

KW - Sintering

KW - Steel

M3 - Conference contribution

SP - 99

BT - 16th International Scientific Conference on Production Engineering

A2 - Udiljak, Toma

PB - Croatian Association of Production Engineering

CY - Zadar, Croatia

T2 - International Scientific Conference on Production Engineering

Y2 - 8 June 2017 through 10 June 2017

ER -