Wear Phenomenon in Injection Molding

    Research output: Contribution to conferencePresentationResearch


    Wear and in particular abrasive wear in injection molding is a core research topic for the institute of injection molding of polymers at Montanuniversität Leoben. The standard application-oriented test for abrasive wear of polymers on plastic mold steels is the plate-let-wear-tester method in which two steel specimens form a thin wear slit. The glass fiber reinforced polymer melt is injected through the wear slit and the surface of both specimens is abraded. In the injection molding process similar conditions often occur in thin-walled parts or in film gates. A drastic loss of hardness of a powder metallurgical steel (PM-steel) was discovered after approx. 200 injection cycles while performing platelet-wear-tests. For experimentally analyzing the reason for the loss of the steel hardness during injection molding a new platelet-wear-testing apparatus was developed which can be used to measure the increase of the temperature inside the steel specimen while testing. In systematic ex-periments the comparability of results generated with the new wear testing apparatus to those of the former platelet-tester were confirmed and the phenomenon of hardness loss was in-vestigated in detail. First results show and support the hypothesis that a temperature increase above the annealing temperature occurred inside the steel due to viscous dissipation at the steel surface. In co-operation with the company voestalpine BÖHLER Edelstahl & Co KG, tests on the PM-steel in a dilatometer were performed to simulate the cycle-by-cycle heat pulses occurring in the injection molding process. With the results of those tests, it was possible to state a hypothesis for the reason of this hardness loss
    Original languageEnglish
    Publication statusPublished - 27 Sept 2021
    EventPPS 2021 - 36th International Conference of the Polymer Processing Sociel - Hotel Bonaventure, Montreal, Canada
    Duration: 26 Sept 202129 Sept 2021


    ConferencePPS 2021 - 36th International Conference of the Polymer Processing Sociel
    Internet address

    Cite this