Creep properties and creep microstructure evolution of Mg-2.49Nd-1.82Gd-0.19Zn-0.4Zr alloy

Han, W., Yang, G., Xiao, L., LI, J. & Jie, W., 2017, in : Materials science and engineering: A, Structural materials: properties, microstructure and processing. 684, S. 90-100

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Microstructure, texture evolution and tensile properties of extruded Mg-4.58Zn-2.6Gd-0.16Zr alloy

Xiao, L., Yang, G., Chen, J., Luo, S. F., Li, J. & Jie, W., 2019, in : Materials science and engineering: A, Structural materials: properties, microstructure and processing. 744.2019, January, S. 277-289 13 S.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Yield strength prediction in Ni-base alloy 718Plus based on thermo-kinetic precipitation simulation

Ahmadi, M. R., Povoden-Karadeniz, E., Whitmore, L., Stockinger, M., Falahati, A. & Kozeschnik, E., 1 Jul 2014, in : Materials Science and Engineering A. 608, S. 114-122 9 S.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

A probabilistic Kitagawa-Takahashi diagram for fatigue strength assessment of cast aluminium alloys

Aigner, R., Pusterhofer, S., Pomberger, S., Leitner, M. & Stoschka, M., 4 Feb 2019, in : Materials science and engineering: A, Structural materials: properties, microstructure and processing. 745.2019, February, S. 326-334 9 S.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

On the mean stress sensitivity of cast aluminium considering imperfections

Aigner, R., Leitner, M. & Stoschka, M., 5 Jun 2019, in : Materials science and engineering: A, Structural materials: properties, microstructure and processing. 758.2019, June, S. 172-184 13 S.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Critical shapes and arrangements of carbides in high-speed tool steel

Antretter, T. & Fischer, F. D., 1 Sep 1997, in : Materials science and engineering: A, Structural materials: properties, microstructure and processing. 237, 1, S. 6-11 6 S.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

The effect of residual stresses and strain reversal on the fracture toughness of TiAl alloys

Appel, F., Paul, J., Staron, P., Kolednik, O., Predan, J., Oehring, M. & Fischer, F-D., 2017, in : Materials science and engineering: A, Structural materials: properties, microstructure and processing. 709, S. 17-29

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Nanoindentation and wear properties of Ti and Ti-TiB composite materials produced by selective laser melting

Attar, H., Ehtemam-Haghighi, S., Kent, D., Okulov, I. V., Wendrock, H., Bönisch, M., Volegov, A. S., Calin, M., Eckert, J. & Dargusch, M. S., Mär 2017, in : Materials science and engineering: A, Structural materials: properties, microstructure and processing. 688, S. 20-26

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Evaluation of tensile and low-cycle fatigue properties at elevated temperatures in piston aluminum-silicon alloys with and without nano-clay-particles and heat treatment

Azadi, M., Bahmanabadi, H., Gruen, F. & Winter, G., 24 Jun 2020, in : Materials Science and Engineering A. 788, 139497.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Effect of oxide particles on the stabilization and final microstructure in aluminium

Bachmaier, A. & Pippan, R., 2011, in : Materials science and engineering: A, Structural materials: properties, microstructure and processing. S. 7589-7595

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Controlling the distribution of structural heterogeneities in severely deformed metallic glass

Bian, X. L., Zhao, D., Kim, J. T., Sopu, D., Wang, G., Pippan, R. & Eckert, J., 2 Mär 2019, in : Materials Science and Engineering A. 752.2019, 3 April, S. 36-42 7 S.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

On the overaging behaviour of tool steel X38CrMoV5-3

Bischof, M., Staron, P., Caliskanoglu, Z. D., Leitner, H., Scheu, C. & Clemens, H., 2008, in : Materials science and engineering: A, Structural materials: properties, microstructure and processing. 472, S. 148-152

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Residual stress and microstructure evolution in steel tubes for different cooling conditions – Simulation and verification

Brunbauer, S., Winter, G., Antretter, T., Staron, P. & Ecker, W., 2019, in : Materials science and engineering: A, Structural materials: properties, microstructure and processing. 747, S. 73-79

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Characterisation of Residual Stresses in Turbine Discs by Neutron and High-Energy X-Ray Diffraction and Comparisation to Finite Element Modeling

Cihak, U., Staron, P., Clemens, H., Homeyer, J., Stockinger, M. & Tockner, J., 2006, in : Materials science and engineering: A, Structural materials: properties, microstructure and processing. 437, S. 75-82

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

In-situ observations of the fracture and adhesion of Cu/Nb multilayers on polyimide substrates

Cordill, M., Kleinbichler, A., Völker, B., Kraker, P., Economy, D. R., Többens, D. M., Kirchlechner, C. & Kennedy, M. S., 14 Aug 2018, in : Materials science and engineering: A, Structural materials: properties, microstructure and processing. 735.2018, 26 September, S. 456-462 7 S.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Investigation of the fatigue behavior of Al thin films with different microstructure

Dehm, G., Heinz, W. & Pippan, R., 2010, in : Materials science and engineering: A, Structural materials: properties, microstructure and processing. S. 7757-7763

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Stress-controlled fatigue behaviour of micro-sized polycrystalline copper wires

Dehm, G., 2009, in : Materials science and engineering: A, Structural materials: properties, microstructure and processing. 515, S. 71-78

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Microstructure and mechanical properties of a low C steel subjected to bainitic of quenching and partitioning heat treatments

Ebner, S., Suppan, H., Schnitzer, R. & Hofer, C., 2018, in : Materials science and engineering: A, Structural materials: properties, microstructure and processing. S. 1-9

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Effect of mechanically induced structural rejuvenation on the deformation behaviour of CuZr based bulk metallic glass

Ebner, C., Pauly, S., Eckert, J. & Rentenberger, C., 31 Jan 2020, in : Materials Science and Engineering A. 773, 138848.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Measurement and Simulation of Temperature and Velocity Fields during the Cooling of Water in a Die Casting Model

Eck, S., Stefan Kharicha, M., Ishmurzin, A. & Ludwig, A., 2005, in : Materials science and engineering: A, Structural materials: properties, microstructure and processing. 413-414, S. 79-84

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Significance of temperature increase in processing by high-pressure torsion

Edalati, K., Miresmaeili, R., Horita, Z., Kanayama, H. & Pippan, R., 2011, in : Materials science and engineering: A, Structural materials: properties, microstructure and processing. S. 7301-7305

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Comparison of NiAl precipitation in a medium carbon secondary hardening steel and C-free PH13-8 maraging steel

Erlach, S. D., Leitner, H., Bischof, M., Clemens, H., Danoix, F., Lemarchand, D. & Siller, I., 2006, in : Materials science and engineering: A, Structural materials: properties, microstructure and processing. 429, S. 96-106

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Influence of Ag and Co additions on glass-forming ability, thermal and mechanical properties of Cu–Zr–Al bulk metallic glasses

Escher, B., Kühn, U., Eckert, J., Rentenberger, C. & Pauly, S., 15 Sep 2016, in : Materials science and engineering: A, Structural materials: properties, microstructure and processing. 673, S. 90-98 9 S.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Interplay between sample size and grain size: Single crystalline vs. ultrafine-grained chromium micropillars

Fritz, R., Maier-Kiener, V., Lutz, D. & Kiener, D., 30 Sep 2016, in : Materials science and engineering: A, Structural materials: properties, microstructure and processing. 674, S. 626-633

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Interplay between sample size and grain size: Singlec rystalline vs. ultrafine-grained chromium micropillars

Fritz, R., Maier-Kiener, V., Lutz, D. & Kiener, D., 2016, in : Materials science and engineering: A, Structural materials: properties, microstructure and processing. 674, S. 626-633 8 S.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Influence of non-metallic inclusions on the austenite-to-ferrite phase transformation

Gamsjäger, E., Fischer, F. D. & Svoboda, J., 2004, in : Materials science and engineering: A, Structural materials: properties, microstructure and processing. 365, S. 291-297

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Microstructure transition from lamellar to compacted graphite using different modification agents

Geier, G. F., Bauer, W., Mckay, B. & Schumacher, P., 2005, in : Materials science and engineering: A, Structural materials: properties, microstructure and processing. S. 339-345

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Relationship between mechanical damage and electrical degradation in polymer supported metal films subjected to cyclic loading

Glushko, O., Klug, A., List-Kratochvil, E. J. W. & Cordill, M., 2016, in : Materials science and engineering: A, Structural materials: properties, microstructure and processing.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Characterization of the high temperature deformatin behavior of two intermetallic TiAl-Mo alloys

Godor, F., Werner, R., Lindemann, J., Clemens, H. & Mayer, S., 2015, in : Materials science and engineering: A, Structural materials: properties, microstructure and processing. 648, S. 208-216

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Mechanism of low temperature deformation in aluminium alloys

Gruber, B., Weißensteiner, I., Kremmer, T., Grabner, F., Falkinger, G., Schökel, A., Spieckermann, F., Schäublin, R., Uggowitzer, P. & Pogatscher, S., 2 Aug 2020, in : Materials science and engineering: A, Structural materials: properties, microstructure and processing. 2020, 795, 11 S., 139935.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Aluminum matrix composites reinforced with metallic glass particles with core-shell structure

Guan, H. D., Li, C. J., Gao, P., Prashanth, K. G., Tan, J., Eckert, J., Tao, J. M. & Yi, J. H., 13 Jan 2020, in : Materials Science and Engineering A. 771, 138630.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Simulation of distortion and residual stress in high pressure die casting - modelling and experiments

Hofer, P., Kaschnitz, E. & Schumacher, P., 2012, in : Materials science and engineering: A, Structural materials: properties, microstructure and processing. 33, S. 1-8

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Morphology change of retained austenite during austempering of carbide-freebainiticsteel

Hofer, C., Winkelhofer, F., Clemens, H. & Primig, S., 2016, in : Materials science and engineering: A, Structural materials: properties, microstructure and processing. 664, S. 236-246 11 S.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Influence of thermomechanical fatigue loading conditions on the nanostructure of secondary hardening steels

Hofinger, M., Seisenbacher, B., Landefeld, A., Ognianov, M., Leitner, H. & Schnitzer, R., 2021, in : Materials science and engineering: A, Structural materials: properties, microstructure and processing. 2021, 802, S. 1-11

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Anisotropic fracture behavior of ultrafine-grained iron

Hohenwarter, A. & Pippan, R., 2010, in : Materials science and engineering: A, Structural materials: properties, microstructure and processing. 527, S. 2649-2656

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Deformation and fracture characteristics of ultrafine-grained vanadium

Hohenwarter, A. & Wurster, S., 2016, in : Materials science and engineering: A, Structural materials: properties, microstructure and processing. 650, S. 492-496 5 S.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

A comprehensive study on the damage tolerance of ultrafine-grained copper

Hohenwarter, A. & Pippan, R., 2012, in : Materials science and engineering: A, Structural materials: properties, microstructure and processing. 540, S. 89-96

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Incremental high pressure torsion as a novel severe plastic deformation process: Processing features and application to copper

Hohenwarter, A., 2015, in : Materials science and engineering: A, Structural materials: properties, microstructure and processing. 626, S. 80-85

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

The influence of microstructure on the cyclic deformation and damage of copper and an oxide dispersion strengthened steel studied via in-situ micro-beam bending

Howard, C., Fritz, R., Alfreider, M., Kiener, D. & Hosemann, P., 27 Feb 2017, in : Materials science and engineering: A, Structural materials: properties, microstructure and processing. 687, S. 313-322

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Effect of cerium addition on microstructure and mechanical properties of high-strength Fe85Cr4Mo8V2C1 cast steel

Hufenbach, J., Helth, A., Lee, M. H., Wendrock, H., Giebeler, L., Choe, C. Y., Kim, K. H., Kühn, U., Kim, T. S. & Eckert, J., 30 Sep 2016, in : Materials science and engineering: A, Structural materials: properties, microstructure and processing. 674, S. 366-374 9 S.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Comparison of microstructural crack paths between hypo-eutectic Al-Si-Cu and Al-Si-Mg cast alloys in high plasticity regimes under rotating bending

Huter, P., Winter, G., Renhart, P., Schwab, M., Oberfrank, S., Grün, F. & Stauder, B., 2014, in : Materials science and engineering: A, Structural materials: properties, microstructure and processing. 618, S. 578-585

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Influence of morphology and structural size on the fracture behavior of a nanostructured pearlitic steel

Kammerhofer, C., Hohenwarter, A., Scheriau, S., Brantner, H. P. & Pippan, R., 2013, in : Materials science and engineering: A, Structural materials: properties, microstructure and processing. 585, S. 190-196

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Shape and Stability of the Slag/Melt Interface in a Small DC ESR Process

Kharicha, A., Ludwig, A. & Wu, M., 2005, in : Materials science and engineering: A, Structural materials: properties, microstructure and processing. 413-414, S. 129-134

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Micro-compression testing: A critical discussion of experimental constraints

Kiener, D., Motz, C. & Dehm, G., 2009, in : Materials science and engineering: A, Structural materials: properties, microstructure and processing. A505, S. 79-87

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

FIB damage of Cu and possible consequences for miniaturized mechanical tests

Kiener, D., Motz, C., Rester, M., Jenko, M. & Dehm, G., 2007, in : Materials science and engineering: A, Structural materials: properties, microstructure and processing. 459, S. 262-272

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Cooperative deformation behavior between the shear band and boundary sliding of an Al-based nanostructure-dendrite composite

Kim, J. T., Hong, S. H., Kim, Y. S., Park, H. J., Maity, T., Chawake, N., Bian, X. L., Sarac, B., Park, J. M., Prashanth, K. G., Park, J. Y., Eckert, J. & Kim, K. B., 11 Aug 2018, in : Materials science and engineering: A, Structural materials: properties, microstructure and processing. 735.2018, 26 September, S. 81-88 8 S.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Local and global measures of the fracture toughness of metal matrix composites

Kolednik, O. & Sabirov, I., 2010, in : Materials science and engineering: A, Structural materials: properties, microstructure and processing. S. 3100-3110

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Modeling fatigue crack growth in a bimaterial specimen with the configurational forces concept

Kolednik, O., Predan, J., Gubeljak, N. & Fischer, F. D., 2009, in : Materials science and engineering: A, Structural materials: properties, microstructure and processing. 519, S. 172-183

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Shape Factors in Modeling of Precipitation

Kozeschnik, E., Svoboda, J. & Fischer, F. D., 2006, in : Materials science and engineering: A, Structural materials: properties, microstructure and processing. 441, S. 68-72

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Discrete dislocation simulation of nanoindentation: The effect of statistically distributed dislocations

Kreuzer, H. G. M. & Pippan, R., 2005, in : Materials science and engineering: A, Structural materials: properties, microstructure and processing. 400-401, S. 460-462

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)