Materials science and engineering: A, Structural materials: properties, microstructure and processing, 0921-5093
Fachzeitschrift: Zeitschrift
| ISSNs | 0921-5093 |
|---|---|
| Weitere suchbare ISSN (eISSN) | 1873-4936 |
Publikationen
- Veröffentlicht
Creep properties and creep microstructure evolution of Mg-2.49Nd-1.82Gd-0.19Zn-0.4Zr alloy
Han, W., Yang, G., Xiao, L., LI, J. & Jie, W., 2017, in : Materials science and engineering: A, Structural materials: properties, microstructure and processing. 684, S. 90-100Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)
- Veröffentlicht
Microstructure, texture evolution and tensile properties of extruded Mg-4.58Zn-2.6Gd-0.16Zr alloy
Xiao, L., Yang, G., Chen, J., Luo, S. F., Li, J. & Jie, W., 2019, in : Materials science and engineering: A, Structural materials: properties, microstructure and processing. 744.2019, January, S. 277-289 13 S.Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)
- Veröffentlicht
A probabilistic Kitagawa-Takahashi diagram for fatigue strength assessment of cast aluminium alloys
Aigner, R., Pusterhofer, S., Pomberger, S., Leitner, M. & Stoschka, M., 4 Feb 2019, in : Materials science and engineering: A, Structural materials: properties, microstructure and processing. 745.2019, February, S. 326-334 9 S.Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)
- Veröffentlicht
On the mean stress sensitivity of cast aluminium considering imperfections
Aigner, R., Leitner, M. & Stoschka, M., 5 Jun 2019, in : Materials science and engineering: A, Structural materials: properties, microstructure and processing. 758.2019, June, S. 172-184 13 S.Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)
- Veröffentlicht
Critical shapes and arrangements of carbides in high-speed tool steel
Antretter, T. & Fischer, F. D., 1 Sep 1997, in : Materials science and engineering: A, Structural materials: properties, microstructure and processing. 237, 1, S. 6-11 6 S.Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)
- Veröffentlicht
The effect of residual stresses and strain reversal on the fracture toughness of TiAl alloys
Appel, F., Paul, J., Staron, P., Kolednik, O., Predan, J., Oehring, M. & Fischer, F-D., 2017, in : Materials science and engineering: A, Structural materials: properties, microstructure and processing. 709, S. 17-29Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)
- Veröffentlicht
Nanoindentation and wear properties of Ti and Ti-TiB composite materials produced by selective laser melting
Attar, H., Ehtemam-Haghighi, S., Kent, D., Okulov, I. V., Wendrock, H., Bönisch, M., Volegov, A. S., Calin, M., Eckert, J. & Dargusch, M. S., Mär 2017, in : Materials science and engineering: A, Structural materials: properties, microstructure and processing. 688, S. 20-26Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)
- Veröffentlicht
Evaluation of tensile and low-cycle fatigue properties at elevated temperatures in piston aluminum-silicon alloys with and without nano-clay-particles and heat treatment
Azadi, M., Bahmanabadi, H., Gruen, F. & Winter, G., 24 Jun 2020, in : Materials Science and Engineering A. 788, 139497.Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)
- Veröffentlicht
Effect of oxide particles on the stabilization and final microstructure in aluminium
Bachmaier, A. & Pippan, R., 2011, in : Materials science and engineering: A, Structural materials: properties, microstructure and processing. S. 7589-7595Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)
- Veröffentlicht
Controlling the distribution of structural heterogeneities in severely deformed metallic glass
Bian, X. L., Zhao, D., Kim, J. T., Sopu, D., Wang, G., Pippan, R. & Eckert, J., 2 Mär 2019, in : Materials Science and Engineering A. 752.2019, 3 April, S. 36-42 7 S.Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)
- Veröffentlicht
On the overaging behaviour of tool steel X38CrMoV5-3
Bischof, M., Staron, P., Caliskanoglu, Z. D., Leitner, H., Scheu, C. & Clemens, H., 2008, in : Materials science and engineering: A, Structural materials: properties, microstructure and processing. 472, S. 148-152Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)
- Veröffentlicht
Residual stress and microstructure evolution in steel tubes for different cooling conditions – Simulation and verification
Brunbauer, S., Winter, G., Antretter, T., Staron, P. & Ecker, W., 2019, in : Materials science and engineering: A, Structural materials: properties, microstructure and processing. 747, S. 73-79Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)
- Veröffentlicht
Characterisation of Residual Stresses in Turbine Discs by Neutron and High-Energy X-Ray Diffraction and Comparisation to Finite Element Modeling
Cihak, U., Staron, P., Clemens, H., Homeyer, J., Stockinger, M. & Tockner, J., 2006, in : Materials science and engineering: A, Structural materials: properties, microstructure and processing. 437, S. 75-82Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)
- Elektronische Veröffentlichung vor Drucklegung.
In-situ observations of the fracture and adhesion of Cu/Nb multilayers on polyimide substrates
Cordill, M., Kleinbichler, A., Völker, B., Kraker, P., Economy, D. R., Többens, D. M., Kirchlechner, C. & Kennedy, M. S., 14 Aug 2018, in : Materials science and engineering: A, Structural materials: properties, microstructure and processing. 735.2018, 26 September, S. 456-462 7 S.Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)
- Veröffentlicht
Stress-controlled fatigue behaviour of micro-sized polycrystalline copper wires
Dehm, G., 2009, in : Materials science and engineering: A, Structural materials: properties, microstructure and processing. 515, S. 71-78Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)
- Veröffentlicht
Investigation of the fatigue behavior of Al thin films with different microstructure
Dehm, G., Heinz, W. & Pippan, R., 2010, in : Materials science and engineering: A, Structural materials: properties, microstructure and processing. S. 7757-7763Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)
- Veröffentlicht
Effect of mechanically induced structural rejuvenation on the deformation behaviour of CuZr based bulk metallic glass
Ebner, C., Pauly, S., Eckert, J. & Rentenberger, C., 31 Jan 2020, in : Materials Science and Engineering A. 773, 138848.Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)
- Veröffentlicht
Microstructure and mechanical properties of a low C steel subjected to bainitic of quenching and partitioning heat treatments
Ebner, S., Suppan, H., Schnitzer, R. & Hofer, C., 2018, in : Materials science and engineering: A, Structural materials: properties, microstructure and processing. S. 1-9Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)
- Veröffentlicht
Measurement and Simulation of Temperature and Velocity Fields during the Cooling of Water in a Die Casting Model
Eck, S., Stefan Kharicha, M., Ishmurzin, A. & Ludwig, A., 2005, in : Materials science and engineering: A, Structural materials: properties, microstructure and processing. 413-414, S. 79-84Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)
- Veröffentlicht
Significance of temperature increase in processing by high-pressure torsion
Edalati, K., Miresmaeili, R., Horita, Z., Kanayama, H. & Pippan, R., 2011, in : Materials science and engineering: A, Structural materials: properties, microstructure and processing. S. 7301-7305Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)
