A Way of Coupling Ternary Phase Diagram Information with Multiphase Solidification Simulations

Ludwig, A., Gruber-Pretzler, M., Mayer, F., Ishmurzin, A. & Wu, M., 2005, in : Materials science and engineering: A, Structural materials: properties, microstructure and processing. 413-414, S. 485-489

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

A comprehensive study on the damage tolerance of ultrafine-grained copper

Hohenwarter, A. & Pippan, R., 2012, in : Materials science and engineering: A, Structural materials: properties, microstructure and processing. 540, S. 89-96

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

A probabilistic Kitagawa-Takahashi diagram for fatigue strength assessment of cast aluminium alloys

Aigner, R., Pusterhofer, S., Pomberger, S., Leitner, M. & Stoschka, M., 4 Feb 2019, in : Materials science and engineering: A, Structural materials: properties, microstructure and processing. 745.2019, February, S. 326-334 9 S.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Activation Parameters for Deformation of Ultrafine-Grained Aluminium as Determined by Indentation Strain Rate Jumps at Elevated Temperature

Wheeler, J. M., Maier, V., Durst, K., Göken, M. & Michler, J., 2013, in : Materials science and engineering: A, Structural materials: properties, microstructure and processing. 585, S. 108-113

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Aluminum matrix composites reinforced with metallic glass particles with core-shell structure

Guan, H. D., Li, C. J., Gao, P., Prashanth, K. G., Tan, J., Eckert, J., Tao, J. M. & Yi, J. H., 13 Jan 2020, in : Materials Science and Engineering A. 771, 138630.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Analysis of roughness-induced crack closure based on asymmetric crack-wake plasticity and size ratio effect

Pippan, R. & Pokluda, J., 2007, in : Materials science and engineering: A, Structural materials: properties, microstructure and processing. A462, S. 355-358

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Analysis of the Precipitation Behaviour in a High Speed Steel with Small Angle Neutron Scattering

Leitner, H., Staron, P., Clemens, H., Marsoner, S. & Warbichler, P., 2005, in : Materials science and engineering: A, Structural materials: properties, microstructure and processing. 398, S. 323-331

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Anisotropic fracture behavior of ultrafine-grained iron

Hohenwarter, A. & Pippan, R., 2010, in : Materials science and engineering: A, Structural materials: properties, microstructure and processing. 527, S. 2649-2656

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Annealing studies of nanocomposite Ti-Si-C thin films with respect to phase stability and tribological performance

Rester, M., Neidhardt, J., Eklund, P., Emmerlich, J., Ljungcrantz, H., Hultman, L. & Mitterer, C., 2006, in : Materials science and engineering: A, Structural materials: properties, microstructure and processing. 429, S. 90-95

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Back stress evolution and iso-volume fraction lines in a Cr-Ni-Mo-Al-Ti maraging steel in the process of martensitic transformation

Nagayama, K., Terasaki, T., Goto, S., Tanaka, K., Antretter, T., Fischer, F. D., Cailletaud, G. & Azzouz, F., 25 Okt 2002, in : Materials science and engineering: A, Structural materials: properties, microstructure and processing. 336, 1-2, S. 30-38 9 S.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Changes in the mechanical properties of a pearlitic steel due to large shear deformation

Wetscher, F., Stock, R. & Pippan, R., 2007, in : Materials science and engineering: A, Structural materials: properties, microstructure and processing. 445-446, S. 237-243

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Characterisation of Residual Stresses in Turbine Discs by Neutron and High-Energy X-Ray Diffraction and Comparisation to Finite Element Modeling

Cihak, U., Staron, P., Clemens, H., Homeyer, J., Stockinger, M. & Tockner, J., 2006, in : Materials science and engineering: A, Structural materials: properties, microstructure and processing. 437, S. 75-82

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Characterization of the high temperature deformatin behavior of two intermetallic TiAl-Mo alloys

Godor, F., Werner, R., Lindemann, J., Clemens, H. & Mayer, S., 2015, in : Materials science and engineering: A, Structural materials: properties, microstructure and processing. 648, S. 208-216

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Comparison of NiAl precipitation in a medium carbon secondary hardening steel and C-free PH13-8 maraging steel

Erlach, S. D., Leitner, H., Bischof, M., Clemens, H., Danoix, F., Lemarchand, D. & Siller, I., 2006, in : Materials science and engineering: A, Structural materials: properties, microstructure and processing. 429, S. 96-106

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Comparison of microstructural crack paths between hypo-eutectic Al-Si-Cu and Al-Si-Mg cast alloys in high plasticity regimes under rotating bending

Huter, P., Winter, G., Renhart, P., Schwab, M., Oberfrank, S., Grün, F. & Stauder, B., 2014, in : Materials science and engineering: A, Structural materials: properties, microstructure and processing. 618, S. 578-585

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Competing Accommodation Mechanisms of the Martensite in Nanocrystalline NiTi Shape Memory Alloys

Waitz, T., Pranger, W., Antretter, T., Fischer, F. D. & Karnthaler, H-P., 2008, in : Materials science and engineering: A, Structural materials: properties, microstructure and processing. 481-482, S. 479-483

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Compressed Bi-crystal Micropillars Showing a Sigmoidal Deformation State - A Computational Study

Toth, F., Kirchlechner, C., Fischer, F. D., Dehm, G. & Rammerstorfer, F. G., 2017, in : Materials science and engineering: A, Structural materials: properties, microstructure and processing. 700, S. 168-174

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Controlling the distribution of structural heterogeneities in severely deformed metallic glass

Bian, X. L., Zhao, D., Kim, J. T., Sopu, D., Wang, G., Pippan, R. & Eckert, J., 2 Mär 2019, in : Materials Science and Engineering A. 752.2019, 3 April, S. 36-42 7 S.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Cooperative deformation behavior between the shear band and boundary sliding of an Al-based nanostructure-dendrite composite

Kim, J. T., Hong, S. H., Kim, Y. S., Park, H. J., Maity, T., Chawake, N., Bian, X. L., Sarac, B., Park, J. M., Prashanth, K. G., Park, J. Y., Eckert, J. & Kim, K. B., 11 Aug 2018, in : Materials science and engineering: A, Structural materials: properties, microstructure and processing. 735.2018, 26 September, S. 81-88 8 S.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Corrigendum to “Structural modifications in sub-Tg annealed CuZr-based metallic glass”

Sarac, B., Bernasconi, A., Wright, J., Stoica, M., Spieckermann, F., Mühlbacher, M., Keckes, J., Bian, X. L., Wang, G. & Eckert, J., Dez 2017, in : Materials science and engineering: A, Structural materials: properties, microstructure and processing.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Creep properties and creep microstructure evolution of Mg-2.49Nd-1.82Gd-0.19Zn-0.4Zr alloy

Han, W., Yang, G., Xiao, L., LI, J. & Jie, W., 2017, in : Materials science and engineering: A, Structural materials: properties, microstructure and processing. 684, S. 90-100

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Critical shapes and arrangements of carbides in high-speed tool steel

Antretter, T. & Fischer, F. D., 1 Sep 1997, in : Materials science and engineering: A, Structural materials: properties, microstructure and processing. 237, 1, S. 6-11 6 S.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Deformation and fracture characteristics of ultrafine-grained vanadium

Hohenwarter, A. & Wurster, S., 2016, in : Materials science and engineering: A, Structural materials: properties, microstructure and processing. 650, S. 492-496 5 S.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Deformation mechanisms of a modified 316L austenitic steel subjected to high pressure torsion

Scheriau, S., Zhang, Z., Kleber, S. & Pippan, R., 2011, in : Materials science and engineering: A, Structural materials: properties, microstructure and processing. S. 2776-2786

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Designed heterogeneities improve the fracture reliability of a Zr-based bulk metallic glass

Li, B. S., Shakur Shahabi, H., Scudino, S., Eckert, J. & Kruzic, J. J., 14 Okt 2015, in : Materials science and engineering: A, Structural materials: properties, microstructure and processing. 646, S. 242-248 7 S.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Direct or indirect: Influence of type of retained austenite decomposition during tempering on the toughness of a hot-work tool steel

Lerchbacher, C., Zinner, S. & Leitner, H., 2013, in : Materials science and engineering: A, Structural materials: properties, microstructure and processing. 564, S. 163-168

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Discrete dislocation simulation of nanoindentation: The effect of statistically distributed dislocations

Kreuzer, H. G. M. & Pippan, R., 2005, in : Materials science and engineering: A, Structural materials: properties, microstructure and processing. 400-401, S. 460-462

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Discrete dislocation simulation of nanoindentation: the effect of moving conditions and indenter shape

Kreuzer, H. G. M. & Pippan, R., 2004, in : Materials science and engineering: A, Structural materials: properties, microstructure and processing. 387-389, S. 254-256

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Dynamic recrystallization of NI-base alloys-Experimental results and comparisons with simulations

Poelt, P., Sommitsch, C., Mitsche, S. & Walter, M., 2006, in : Materials science and engineering: A, Structural materials: properties, microstructure and processing. S. 306-314

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Effect of back stress evolution due to martensitic transformation on iso-volume fraction lines in a Cr-Ni-Mo-Al-Ti maraging steel

Tanaka, K., Terasaki, T., Goto, S., Antretter, T., Fischer, F. D. & Cailletaud, G., 20 Jan 2003, in : Materials science and engineering: A, Structural materials: properties, microstructure and processing. 341, 1-2, S. 189-196 8 S.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Effect of cerium addition on microstructure and mechanical properties of high-strength Fe85Cr4Mo8V2C1 cast steel

Hufenbach, J., Helth, A., Lee, M. H., Wendrock, H., Giebeler, L., Choe, C. Y., Kim, K. H., Kühn, U., Kim, T. S. & Eckert, J., 30 Sep 2016, in : Materials science and engineering: A, Structural materials: properties, microstructure and processing. 674, S. 366-374 9 S.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Effect of heat treatments on microstructure and properties of CuCrZr produced by laser-powder bed fusion

Wallis, C. & Buchmayr, B., 28 Jan 2019, in : Materials science and engineering: A, Structural materials: properties, microstructure and processing. 744.2019, January, S. 215-223 9 S.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Effect of mechanically induced structural rejuvenation on the deformation behaviour of CuZr based bulk metallic glass

Ebner, C., Pauly, S., Eckert, J. & Rentenberger, C., 31 Jan 2020, in : Materials Science and Engineering A. 773, 138848.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Effect of oxide particles on the stabilization and final microstructure in aluminium

Bachmaier, A. & Pippan, R., 2011, in : Materials science and engineering: A, Structural materials: properties, microstructure and processing. S. 7589-7595

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Effect of reverted austenite on tensile and impact strength in a martensitic stainless steel−An in-situ X-ray diffraction study

Wießner, M., Gamsjäger, E., van der Zwaag, S. & Angerer, P., 11 Nov 2016, in : Materials science and engineering: A, Structural materials: properties, microstructure and processing. 682, S. 117-125 9 S.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Effect of tempering and deep cryogenic treatment on microstructure and mechanical properties of Cr–Mo–V–Ni steel

Yan, Z., Liu, K. & Eckert, J., 10 Jun 2020, in : Materials Science and Engineering A. 787, 139520.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Effect of thermal treatment on microstructure in high pressure torsion (HPT) deformed nickel

Schafler, E. & Pippan, R., 2004, in : Materials science and engineering: A, Structural materials: properties, microstructure and processing. 387-389, S. 799-804

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Elevated temperature mechanical properties of novel ultra-fine grained Cu-Nb composites

Primorac, M-M., Abad, M. D., Hosemann, P., Kreuzeder, M., Maier, V. & Kiener, D., 2015, in : Materials science and engineering: A, Structural materials: properties, microstructure and processing. 625, S. 296-302

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Enhanced mechanical properties of Al₂O₃-C refractories with silicon hybridized expanded graphite

Wang, Q., Li, Y., Jin, S., Sang, S., Xu, Y., Xu, X. & Wang, G., 2 Jan 2018, in : Materials science and engineering: A, Structural materials: properties, microstructure and processing. 709, S. 160-171 12 S.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Erratum to "On the experimental characterization of crystal plasticity in polycrystals"

Tatschl, A. & Kolednik, O., 2004, in : Materials science and engineering: A, Structural materials: properties, microstructure and processing. A 364, S. 384-399

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Evaluation of tensile and low-cycle fatigue properties at elevated temperatures in piston aluminum-silicon alloys with and without nano-clay-particles and heat treatment

Azadi, M., Bahmanabadi, H., Gruen, F. & Winter, G., 24 Jun 2020, in : Materials Science and Engineering A. 788, 139497.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Evolution of misorientation distribution during warm 'abc' forging of commercial-purity titanium

Mironov, S. Y., Salishchev, G. A., Myshlyaev, M. M. & Pippan, R., 2006, in : Materials science and engineering: A, Structural materials: properties, microstructure and processing. 418, S. 257-267

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

FIB damage of Cu and possible consequences for miniaturized mechanical tests

Kiener, D., Motz, C., Rester, M., Jenko, M. & Dehm, G., 2007, in : Materials science and engineering: A, Structural materials: properties, microstructure and processing. 459, S. 262-272

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Friction welding of selective laser melted Ti6Al4V parts

Prashanth, K. G., Damodaram, R., Maity, T., Wang, P. & Eckert, J., 3 Aug 2017, in : Materials science and engineering: A, Structural materials: properties, microstructure and processing. 704.2017, September, S. 66-71 6 S.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

General Concept for a Stability Analysis of a Planar Interface under Rapid Solidification Conditions in Multicomponent Alloy Systems

Ludwig, A. & Pustal, B., 2001, in : Materials science and engineering: A, Structural materials: properties, microstructure and processing. S. 337-340

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Generalised ‘Jackson-Hunt’ Model for Eutectic Solidification at Low And Large Peclet Numbers And Any Binary Eutectic Phase Diagram

Ludwig, A. & Leibbrandt, S., 2004, in : Materials science and engineering: A, Structural materials: properties, microstructure and processing. S. 540-546

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Hardening and microstructure reactions in high-temperature Equal-Channel Angular Pressed Mg-Nd-Gd-Zn-Zr alloy

Li, J., Sha, G., Xu, W., Xia, K., Jie, W. & Simon, R., 2010, in : Materials science and engineering: A, Structural materials: properties, microstructure and processing. 527, S. 5092-5099

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Heat Transfer in the Single Roller Quenching Methods

Ludwig, A., 1991, in : Materials science and engineering: A, Structural materials: properties, microstructure and processing. S. 751-754

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Heterogeneous nucleation in an Al-Ni-Si alloy studied using a metallic galss technique

McKay, B., Cizek, P. & Schumacher, P., 2001, in : Materials science and engineering: A, Structural materials: properties, microstructure and processing. S. 240-244

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Hot-working behavior of an advanced intermetallic multi-phase gamma-TiAl based alloy

Schwaighofer, E., Clemens, H., Lindemann, J., Stark, A. & Mayer, S., 2014, in : Materials science and engineering: A, Structural materials: properties, microstructure and processing. 614, S. 297-310

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Impact of severe plastic deformation on microstructure and fracture toughness evolution of a duplex-steel

Schwarz, K. T., Kormout, K. S., Pippan, R. & Hohenwarter, A., 4 Aug 2017, in : Materials science and engineering: A, Structural materials: properties, microstructure and processing. 703, S. 173-179 7 S.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Impact of the B2 ordering behavior on the mechanical properties of a Fe Co Mo alloy

Turk, C., Leitner, H., Kellezi, G., Clemens, H., Gan, W., Staron, P. & Primig, S., 2016, in : Materials science and engineering: A, Structural materials: properties, microstructure and processing. 662, S. 511-518 8 S., 662.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

In situ formation of carbon nanotubes and ceramic whiskers in Al2O3-C refractories with addition of Ni-catalyzed phenolic resin

Luo, M., Li, Y., Sang, S., Zhao, L., Jin, S. & Li, Y., 15 Dez 2012, in : Materials science and engineering: A, Structural materials: properties, microstructure and processing. 558, S. 533-542

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

In-Situ Observation of Cellular Growth under Rapid Solidification Conditions

Ludwig, A. & Sahm, P., 1997, in : Materials science and engineering: A, Structural materials: properties, microstructure and processing. S. 124-128

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

In-situ observations of the fracture and adhesion of Cu/Nb multilayers on polyimide substrates

Cordill, M., Kleinbichler, A., Völker, B., Kraker, P., Economy, D. R., Többens, D. M., Kirchlechner, C. & Kennedy, M. S., 14 Aug 2018, in : Materials science and engineering: A, Structural materials: properties, microstructure and processing. 735.2018, 26 September, S. 456-462 7 S.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Incremental high pressure torsion as a novel severe plastic deformation process: Processing features and application to copper

Hohenwarter, A., 2015, in : Materials science and engineering: A, Structural materials: properties, microstructure and processing. 626, S. 80-85

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Influence of Ag and Co additions on glass-forming ability, thermal and mechanical properties of Cu–Zr–Al bulk metallic glasses

Escher, B., Kühn, U., Eckert, J., Rentenberger, C. & Pauly, S., 15 Sep 2016, in : Materials science and engineering: A, Structural materials: properties, microstructure and processing. 673, S. 90-98 9 S.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Influence of Argon Gas Bubbles and Non-Metallic Inclusions on the Flow Behavior in Steel Continuous Casting

Pfeiler, C., Wu, M. & Ludwig, A., 2005, in : Materials science and engineering: A, Structural materials: properties, microstructure and processing. 413-414, S. 115-120

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Influence of bulk pre-straining on the size effect in nickel compression pillars

Schneider, A. S., Kiener, D., Yakacki, C. M., Maier, H. J., Gruber, P. A., Tamura, N., Kunz, M., Minor, A. M. & Frick, C. P., 2013, in : Materials science and engineering: A, Structural materials: properties, microstructure and processing. 559, S. 147-158 12 S.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Influence of chemical composition and manufacturing conditions on properties of NiTi shape memory alloys

Mehrabi, K., Bahmanpour, H., Shokuhfar, A. & Kneißl, A., 2008, in : Materials science and engineering: A, Structural materials: properties, microstructure and processing. 481-482, S. 693-696

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Influence of grain shape and orientation on the mechanical properties of high pressure deformed nickel

Rathmayr, G. B., Hohenwarter, A. & Pippan, R., 2013, in : Materials science and engineering: A, Structural materials: properties, microstructure and processing. 560, S. 224-231

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Influence of grain size on orientation changes during plastic deformation

Scheriau, S. & Pippan, R., 2008, in : Materials science and engineering: A, Structural materials: properties, microstructure and processing. 493, S. 48-52

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Influence of morphology and structural size on the fracture behavior of a nanostructured pearlitic steel

Kammerhofer, C., Hohenwarter, A., Scheriau, S., Brantner, H. P. & Pippan, R., 2013, in : Materials science and engineering: A, Structural materials: properties, microstructure and processing. 585, S. 190-196

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Influence of non-metallic inclusions on the austenite-to-ferrite phase transformation

Gamsjäger, E., Fischer, F. D. & Svoboda, J., 2004, in : Materials science and engineering: A, Structural materials: properties, microstructure and processing. 365, S. 291-297

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Influence of reverted austenite on static and dynamic mechanical properties of a PH 13-8 Mo maraging steel

Schnitzer, R., Zickler, G., Erhardt, L., Clemens, H., Zinner, S., Thomas, L. & Leitner, H., 2010, in : Materials science and engineering: A, Structural materials: properties, microstructure and processing. 527, S. 2065-2070

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Influence of severe plastic deformation and specimen orientation on the fatigue crack propagation behavior of a pearlitic steel

Leitner, T., Trummer, G., Pippan, R. & Hohenwarter, A., 13 Okt 2017, in : Materials science and engineering: A, Structural materials: properties, microstructure and processing. 710.2018, 5 January, S. 260-270 11 S.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Influence of the heating rate on the recrystallization behavior of molybdenum

Primig, S., Leitner, H., Knabl, W., Lorich, A., Clemens, H. & Stickler, R., 2012, in : Materials science and engineering: A, Structural materials: properties, microstructure and processing. 535, S. 316-324

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Influence of thermomechanical fatigue loading conditions on the nanostructure of secondary hardening steels

Hofinger, M., Seisenbacher, B., Landefeld, A., Ognianov, M., Leitner, H. & Schnitzer, R., 2021, in : Materials science and engineering: A, Structural materials: properties, microstructure and processing. 2021, 802, S. 1-11

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Internal friction and atomic relaxation processes in an intermetallic Mo-rich Ti-44Al-7Mo (γ+βo) model alloy

Usategui, L., No, M. L., Mayer, S., Clemens, H. & Juan, J. S., 2017, in : Materials science and engineering: A, Structural materials: properties, microstructure and processing. 700, S. 495-502

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Interplay between sample size and grain size: Single crystalline vs. ultrafine-grained chromium micropillars

Fritz, R., Maier-Kiener, V., Lutz, D. & Kiener, D., 30 Sep 2016, in : Materials science and engineering: A, Structural materials: properties, microstructure and processing. 674, S. 626-633

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Interplay between sample size and grain size: Singlec rystalline vs. ultrafine-grained chromium micropillars

Fritz, R., Maier-Kiener, V., Lutz, D. & Kiener, D., 2016, in : Materials science and engineering: A, Structural materials: properties, microstructure and processing. 674, S. 626-633 8 S.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Investigation of the fatigue behavior of Al thin films with different microstructure

Dehm, G., Heinz, W. & Pippan, R., 2010, in : Materials science and engineering: A, Structural materials: properties, microstructure and processing. S. 7757-7763

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Laser surface remelting of a Cu-Al-Ni-Mn shape memory alloy

da Silva, M. R., Gargarella, P., Gustmann, T., Botta Filho, W. J., Kiminami, C. S., Eckert, J., Pauly, S. & Bolfarini, C., 20 Apr 2016, in : Materials science and engineering: A, Structural materials: properties, microstructure and processing. 661, S. 61-67 7 S.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Local and global measures of the fracture toughness of metal matrix composites

Kolednik, O. & Sabirov, I., 2010, in : Materials science and engineering: A, Structural materials: properties, microstructure and processing. S. 3100-3110

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Measurement and Simulation of Temperature and Velocity Fields during the Cooling of Water in a Die Casting Model

Eck, S., Stefan Kharicha, M., Ishmurzin, A. & Ludwig, A., 2005, in : Materials science and engineering: A, Structural materials: properties, microstructure and processing. 413-414, S. 79-84

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Mechanical properties of a Cr-Ni-Mo-Al-Ti maraging steel in the process of martensitic transformation

Nagayama, K., Terasaki, T., Tanaka, K., Fischer, F. D., Antretter, T., Cailletaud, G. & Azzouz, F., 30 Jun 2001, in : Materials science and engineering: A, Structural materials: properties, microstructure and processing. 308, 1-2, S. 25-37 13 S.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Mechanism of low temperature deformation in aluminium alloys

Gruber, B., Weißensteiner, I., Kremmer, T., Grabner, F., Falkinger, G., Schökel, A., Spieckermann, F., Schäublin, R., Uggowitzer, P. & Pogatscher, S., 2 Aug 2020, in : Materials science and engineering: A, Structural materials: properties, microstructure and processing. 2020, 795, 11 S., 139935.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Micro-compression testing: A critical discussion of experimental constraints

Kiener, D., Motz, C. & Dehm, G., 2009, in : Materials science and engineering: A, Structural materials: properties, microstructure and processing. A505, S. 79-87

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Micro-to-nano-scale deformation mechanism of a Ti-based dendritic-ultrafine eutectic alloy exhibiting large tensile ductility

Okulov, I. V., Bönisch, M., Volegov, A. S., Shahabi, H. S., Wendrock, H., Gemming, T. & Eckert, J., 13 Jan 2017, in : Materials science and engineering: A, Structural materials: properties, microstructure and processing. 682, S. 673-678 6 S.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Microporosity and statistical size effect on the fatigue strength of cast aluminium alloys EN AC-45500 and 46200

Leitner, M., Garb, C., Remes, H. & Stoschka, M., 7 Nov 2017, in : Materials science and engineering: A, Structural materials: properties, microstructure and processing. 707, S. 567-575 9 S.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Microstructural evolution of Cr-Mn-N Austenitic Steels during Cold Work Hardening

Saller, G., Spiradek-Hahn, K., Scheu, C. & Clemens, H., 2006, in : Materials science and engineering: A, Structural materials: properties, microstructure and processing. 427, S. 246-254

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Microstructural investigation of thermally aged nickel-based superalloy 718Plus

Whitmore, L., Ahmadi, M. R., Stockinger, M., Povoden-Karadeniz, E., Kozeschnik, E. & Leitner, H., 2014, in : Materials science and engineering: A, Structural materials: properties, microstructure and processing. 594, S. 253-259

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Microstructure Evolution and Mechanical Properties of directionally solidified Mg-xGd (x¼0.8, 1.5,and2.5)alloys

Luo, S., Yang, G., Liu, S., Wang, J., Li, J. & Jie, W., 2016, in : Materials science and engineering: A, Structural materials: properties, microstructure and processing. 662, S. 241-250 10 S.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Microstructure and mechanical properties of a heat-treatable Al-3.5Cu-1.5Mg-1Si alloy produced by selective laser melting

Wang, P., Gammer, C., Brenne, F., Prashanth, K. G., Mendes, R. G., Rümmeli, M. H., Gemming, T., Eckert, J. & Scudino, S., 10 Jan 2018, in : Materials science and engineering: A, Structural materials: properties, microstructure and processing. 711.2018, January, S. 562-570 9 S.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Microstructure and mechanical properties of a low C steel subjected to bainitic of quenching and partitioning heat treatments

Ebner, S., Suppan, H., Schnitzer, R. & Hofer, C., 2018, in : Materials science and engineering: A, Structural materials: properties, microstructure and processing. S. 1-9

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Microstructure and mechanical properties of foundry Al-Si-Cu-Hf alloy

Xing, Y., Jia, Z., LI, J., Ding, L., Huang, H. & Liu, Q., 2017, in : Materials Science and Engineering A. 684, S. 90-100

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Microstructure and mechanical properties of foundry Al-Si-Cu-Hf alloy

Xing, Y., Jia, Z., LI, J., Ding, L., Huang, H. & Liu, Q., 2018, in : Materials science and engineering: A, Structural materials: properties, microstructure and processing. 722.2018, April, S. 197-205 9 S.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Microstructure and mechanical properties of the superalloy ATI Allvac 718PlusTM

Zickler, G., Schnitzer, R., Radis, R., Hochfellner, R., Schweins, R., Stockinger, M. & Leitner, H., 2009, in : Materials science and engineering: A, Structural materials: properties, microstructure and processing. S. 295-303

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Microstructure and strength of nano-/ultrafine-grained carbon nanotube-reinforced titanium composites processed by high-pressure torsion

Li, F. X., Hao, P. D., Yi, J. H., Chen, Z., Prashanth, K. G., Maity, T. & Eckert, J., 11 Apr 2018, in : Materials science and engineering: A, Structural materials: properties, microstructure and processing. 722, S. 122-128 7 S.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Microstructure transition from lamellar to compacted graphite using different modification agents

Geier, G. F., Bauer, W., Mckay, B. & Schumacher, P., 2005, in : Materials science and engineering: A, Structural materials: properties, microstructure and processing. S. 339-345

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Microstructure, texture evolution and tensile properties of extruded Mg-4.58Zn-2.6Gd-0.16Zr alloy

Xiao, L., Yang, G., Chen, J., Luo, S. F., Li, J. & Jie, W., 2019, in : Materials science and engineering: A, Structural materials: properties, microstructure and processing. 744.2019, January, S. 277-289 13 S.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Microstructures and mechanical properties of Al2O3-C refractories with addition of multi-walled carbon nanotubes

Luo, M., Li, Y., Jin, S., Sang, S., Zhao, L. & Li, Y., 30 Jun 2012, in : Materials science and engineering: A, Structural materials: properties, microstructure and processing. 548, S. 134-141

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Modeling fatigue crack growth in a bimaterial specimen with the configurational forces concept

Kolednik, O., Predan, J., Gubeljak, N. & Fischer, F. D., 2009, in : Materials science and engineering: A, Structural materials: properties, microstructure and processing. 519, S. 172-183

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Modeling of Dendritic Growth During the Ribbon Formation in Planar Flow Casting

Ludwig, A. & Frommeyer, G., 1991, in : Materials science and engineering: A, Structural materials: properties, microstructure and processing. S. 722-725

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Modeling the columnar-to-equiaxed transition with a three-phase Eulerian approach

Ludwig, A. & Wu, M., 15 Dez 2005, in : Materials science and engineering: A, Structural materials: properties, microstructure and processing. 413-414, S. 109-114 6 S.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Modeling the fatigue crack growth behavior of Ti-6Al-4V by considering grain size and stress ratio

Oberwinkler, B., 2011, in : Materials science and engineering: A, Structural materials: properties, microstructure and processing. 528, S. 5983-5992

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Modelling the Columnar-to-Equiaxed Transition with a 3-Phase Eulerian Approach

Ludwig, A. & Wu, M., 2005, in : Materials science and engineering: A, Structural materials: properties, microstructure and processing. 413-414, S. 109-114

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Morphology change of retained austenite during austempering of carbide-freebainiticsteel

Hofer, C., Winkelhofer, F., Clemens, H. & Primig, S., 2016, in : Materials science and engineering: A, Structural materials: properties, microstructure and processing. 664, S. 236-246 11 S.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Nanoindentation and wear properties of Ti and Ti-TiB composite materials produced by selective laser melting

Attar, H., Ehtemam-Haghighi, S., Kent, D., Okulov, I. V., Wendrock, H., Bönisch, M., Volegov, A. S., Calin, M., Eckert, J. & Dargusch, M. S., Mär 2017, in : Materials science and engineering: A, Structural materials: properties, microstructure and processing. 688, S. 20-26

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Nanoscaled structure of a Cu-Fe composite processed by high-pressure torsion

Sauvage, X. & Pippan, R., 2005, in : Materials science and engineering: A, Structural materials: properties, microstructure and processing. 410-411, S. 345-347

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)