Materials science and engineering: A, Structural materials: properties, microstructure and processing, 0921-5093
Fachzeitschrift: Zeitschrift
| ISSNs | 0921-5093 |
|---|---|
| Weitere suchbare ISSN (eISSN) | 1873-4936 |
Publikationen
- Veröffentlicht
Tailoring bimodal grain size structures in nanocrystalline compositionally complex alloys to improve ductility
Schuh, B., Pippan, R. & Hohenwarter, A., 25 Jan 2019, in : Materials Science and Engineering A. 748.2019, 4 March, S. 379-385 7 S.Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)
- Veröffentlicht
The High-temperature Background in Intermetallic Alloys
Weller, M., Clemens, H. & Haneczok, G., 2006, in : Materials science and engineering: A, Structural materials: properties, microstructure and processing. 442, S. 138-141Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)
- Veröffentlicht
The determination of the local conditions for void initiation in front of a crack tip for materials with second-phase particles
Sabirov, I., Duschlbauer, D., Pettermann, H. E. & Kolednik, O., 2005, in : Materials science and engineering: A, Structural materials: properties, microstructure and processing. 393, S. 275-285Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)
- Veröffentlicht
The effect of main alloying elements on the physical properties of Al–Si foundry alloys
Stadler, F., Antrekowitsch, H., Fragner, W., Kaufmann, H., Pinatel, E. & Uggowitzer, P. J., 2013, in : Materials science and engineering: A, Structural materials: properties, microstructure and processing. S. 1-1Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)
- Veröffentlicht
The effect of residual stresses and strain reversal on the fracture toughness of TiAl alloys
Appel, F., Paul, J., Staron, P., Kolednik, O., Predan, J., Oehring, M. & Fischer, F-D., 2017, in : Materials science and engineering: A, Structural materials: properties, microstructure and processing. 709, S. 17-29Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)
- Veröffentlicht
The influence of microstructure and operating temperature on the fatigue endurance of hot forged Inconel (R) 718 components
Maderbacher, H., Oberwinkler, B., Gänser, H-P., Tan, W., Rollett, M. & Stoschka, M., 15 Nov 2013, in : Materials science and engineering: A, Structural materials: properties, microstructure and processing. 585, S. 123-131Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)
- Veröffentlicht
The influence of microstructure and operating temperature on the fatigue endurance of hot forged Inconel® 718 components
Maderbacher, H., Oberwinkler, B., Gänser, H-P., Tan, W., Rollett, M. & Stoschka, M., 2013, in : Materials science and engineering: A, Structural materials: properties, microstructure and processing. Volume 585, S. 123-131Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)
- Veröffentlicht
The influence of microstructure on the cyclic deformation and damage of copper and an oxide dispersion strengthened steel studied via in-situ micro-beam bending
Howard, C., Fritz, R., Alfreider, M., Kiener, D. & Hosemann, P., 27 Feb 2017, in : Materials science and engineering: A, Structural materials: properties, microstructure and processing. 687, S. 313-322Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)
- Veröffentlicht
The microstructure of heat-treated nickel-based superalloy 718Plus
Whitmore, L., Ahmadi, M. R., Guetaz, L., Leitner, H., Povoden-Karadeniz, E., Stockinger, M. & Kozeschnik, E., 2014, in : Materials science and engineering: A, Structural materials: properties, microstructure and processing. 610, S. 39-45Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)
- Veröffentlicht
Transformation from continuous-to-isothermal aging applied on a maraging steel
Primig, S. & Leitner, H., 2010, in : Materials science and engineering: A, Structural materials: properties, microstructure and processing. 527, S. 4399-4405Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)
