A Way of Coupling Ternary Phase Diagram Information with Multiphase Solidification Simulations

Ludwig, A., Gruber-Pretzler, M., Mayer, F., Ishmurzin, A. & Wu, M., 2005, in : Materials science and engineering: A, Structural materials: properties, microstructure and processing. 413-414, S. 485-489

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

A comprehensive study on the damage tolerance of ultrafine-grained copper

Hohenwarter, A. & Pippan, R., 2012, in : Materials science and engineering: A, Structural materials: properties, microstructure and processing. 540, S. 89-96

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

A probabilistic Kitagawa-Takahashi diagram for fatigue strength assessment of cast aluminium alloys

Aigner, R., Pusterhofer, S., Pomberger, S., Leitner, M. & Stoschka, M., 4 Feb 2019, in : Materials science and engineering: A, Structural materials: properties, microstructure and processing. 745.2019, February, S. 326-334 9 S.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Activation Parameters for Deformation of Ultrafine-Grained Aluminium as Determined by Indentation Strain Rate Jumps at Elevated Temperature

Wheeler, J. M., Maier, V., Durst, K., Göken, M. & Michler, J., 2013, in : Materials science and engineering: A, Structural materials: properties, microstructure and processing. 585, S. 108-113

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Aluminum matrix composites reinforced with metallic glass particles with core-shell structure

Guan, H. D., Li, C. J., Gao, P., Prashanth, K. G., Tan, J., Eckert, J., Tao, J. M. & Yi, J. H., 13 Jan 2020, in : Materials Science and Engineering A. 771, 138630.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Analysis of roughness-induced crack closure based on asymmetric crack-wake plasticity and size ratio effect

Pippan, R. & Pokluda, J., 2007, in : Materials science and engineering: A, Structural materials: properties, microstructure and processing. A462, S. 355-358

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Analysis of the Precipitation Behaviour in a High Speed Steel with Small Angle Neutron Scattering

Leitner, H., Staron, P., Clemens, H., Marsoner, S. & Warbichler, P., 2005, in : Materials science and engineering: A, Structural materials: properties, microstructure and processing. 398, S. 323-331

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Anisotropic fracture behavior of ultrafine-grained iron

Hohenwarter, A. & Pippan, R., 2010, in : Materials science and engineering: A, Structural materials: properties, microstructure and processing. 527, S. 2649-2656

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Annealing studies of nanocomposite Ti-Si-C thin films with respect to phase stability and tribological performance

Rester, M., Neidhardt, J., Eklund, P., Emmerlich, J., Ljungcrantz, H., Hultman, L. & Mitterer, C., 2006, in : Materials science and engineering: A, Structural materials: properties, microstructure and processing. 429, S. 90-95

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Back stress evolution and iso-volume fraction lines in a Cr-Ni-Mo-Al-Ti maraging steel in the process of martensitic transformation

Nagayama, K., Terasaki, T., Goto, S., Tanaka, K., Antretter, T., Fischer, F. D., Cailletaud, G. & Azzouz, F., 25 Okt 2002, in : Materials science and engineering: A, Structural materials: properties, microstructure and processing. 336, 1-2, S. 30-38 9 S.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Changes in the mechanical properties of a pearlitic steel due to large shear deformation

Wetscher, F., Stock, R. & Pippan, R., 2007, in : Materials science and engineering: A, Structural materials: properties, microstructure and processing. 445-446, S. 237-243

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Characterisation of Residual Stresses in Turbine Discs by Neutron and High-Energy X-Ray Diffraction and Comparisation to Finite Element Modeling

Cihak, U., Staron, P., Clemens, H., Homeyer, J., Stockinger, M. & Tockner, J., 2006, in : Materials science and engineering: A, Structural materials: properties, microstructure and processing. 437, S. 75-82

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Characterization of the high temperature deformatin behavior of two intermetallic TiAl-Mo alloys

Godor, F., Werner, R., Lindemann, J., Clemens, H. & Mayer, S., 2015, in : Materials science and engineering: A, Structural materials: properties, microstructure and processing. 648, S. 208-216

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Comparison of NiAl precipitation in a medium carbon secondary hardening steel and C-free PH13-8 maraging steel

Erlach, S. D., Leitner, H., Bischof, M., Clemens, H., Danoix, F., Lemarchand, D. & Siller, I., 2006, in : Materials science and engineering: A, Structural materials: properties, microstructure and processing. 429, S. 96-106

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Comparison of microstructural crack paths between hypo-eutectic Al-Si-Cu and Al-Si-Mg cast alloys in high plasticity regimes under rotating bending

Huter, P., Winter, G., Renhart, P., Schwab, M., Oberfrank, S., Grün, F. & Stauder, B., 2014, in : Materials science and engineering: A, Structural materials: properties, microstructure and processing. 618, S. 578-585

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Competing Accommodation Mechanisms of the Martensite in Nanocrystalline NiTi Shape Memory Alloys

Waitz, T., Pranger, W., Antretter, T., Fischer, F. D. & Karnthaler, H-P., 2008, in : Materials science and engineering: A, Structural materials: properties, microstructure and processing. 481-482, S. 479-483

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Compressed Bi-crystal Micropillars Showing a Sigmoidal Deformation State - A Computational Study

Toth, F., Kirchlechner, C., Fischer, F. D., Dehm, G. & Rammerstorfer, F. G., 2017, in : Materials science and engineering: A, Structural materials: properties, microstructure and processing. 700, S. 168-174

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Controlling the distribution of structural heterogeneities in severely deformed metallic glass

Bian, X. L., Zhao, D., Kim, J. T., Sopu, D., Wang, G., Pippan, R. & Eckert, J., 2 Mär 2019, in : Materials Science and Engineering A. 752.2019, 3 April, S. 36-42 7 S.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Cooperative deformation behavior between the shear band and boundary sliding of an Al-based nanostructure-dendrite composite

Kim, J. T., Hong, S. H., Kim, Y. S., Park, H. J., Maity, T., Chawake, N., Bian, X. L., Sarac, B., Park, J. M., Prashanth, K. G., Park, J. Y., Eckert, J. & Kim, K. B., 11 Aug 2018, in : Materials science and engineering: A, Structural materials: properties, microstructure and processing. 735.2018, 26 September, S. 81-88 8 S.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Corrigendum to “Structural modifications in sub-Tg annealed CuZr-based metallic glass”

Sarac, B., Bernasconi, A., Wright, J., Stoica, M., Spieckermann, F., Mühlbacher, M., Keckes, J., Bian, X. L., Wang, G. & Eckert, J., Dez 2017, in : Materials science and engineering: A, Structural materials: properties, microstructure and processing.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Creep properties and creep microstructure evolution of Mg-2.49Nd-1.82Gd-0.19Zn-0.4Zr alloy

Han, W., Yang, G., Xiao, L., LI, J. & Jie, W., 2017, in : Materials science and engineering: A, Structural materials: properties, microstructure and processing. 684, S. 90-100

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Critical shapes and arrangements of carbides in high-speed tool steel

Antretter, T. & Fischer, F. D., 1 Sep 1997, in : Materials science and engineering: A, Structural materials: properties, microstructure and processing. 237, 1, S. 6-11 6 S.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Deformation and fracture characteristics of ultrafine-grained vanadium

Hohenwarter, A. & Wurster, S., 2016, in : Materials science and engineering: A, Structural materials: properties, microstructure and processing. 650, S. 492-496 5 S.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Deformation mechanisms of a modified 316L austenitic steel subjected to high pressure torsion

Scheriau, S., Zhang, Z., Kleber, S. & Pippan, R., 2011, in : Materials science and engineering: A, Structural materials: properties, microstructure and processing. S. 2776-2786

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Designed heterogeneities improve the fracture reliability of a Zr-based bulk metallic glass

Li, B. S., Shakur Shahabi, H., Scudino, S., Eckert, J. & Kruzic, J. J., 14 Okt 2015, in : Materials science and engineering: A, Structural materials: properties, microstructure and processing. 646, S. 242-248 7 S.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Direct or indirect: Influence of type of retained austenite decomposition during tempering on the toughness of a hot-work tool steel

Lerchbacher, C., Zinner, S. & Leitner, H., 2013, in : Materials science and engineering: A, Structural materials: properties, microstructure and processing. 564, S. 163-168

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Discrete dislocation simulation of nanoindentation: The effect of statistically distributed dislocations

Kreuzer, H. G. M. & Pippan, R., 2005, in : Materials science and engineering: A, Structural materials: properties, microstructure and processing. 400-401, S. 460-462

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Discrete dislocation simulation of nanoindentation: the effect of moving conditions and indenter shape

Kreuzer, H. G. M. & Pippan, R., 2004, in : Materials science and engineering: A, Structural materials: properties, microstructure and processing. 387-389, S. 254-256

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Dynamic recrystallization of NI-base alloys-Experimental results and comparisons with simulations

Poelt, P., Sommitsch, C., Mitsche, S. & Walter, M., 2006, in : Materials science and engineering: A, Structural materials: properties, microstructure and processing. S. 306-314

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Effect of back stress evolution due to martensitic transformation on iso-volume fraction lines in a Cr-Ni-Mo-Al-Ti maraging steel

Tanaka, K., Terasaki, T., Goto, S., Antretter, T., Fischer, F. D. & Cailletaud, G., 20 Jan 2003, in : Materials science and engineering: A, Structural materials: properties, microstructure and processing. 341, 1-2, S. 189-196 8 S.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Effect of cerium addition on microstructure and mechanical properties of high-strength Fe85Cr4Mo8V2C1 cast steel

Hufenbach, J., Helth, A., Lee, M. H., Wendrock, H., Giebeler, L., Choe, C. Y., Kim, K. H., Kühn, U., Kim, T. S. & Eckert, J., 30 Sep 2016, in : Materials science and engineering: A, Structural materials: properties, microstructure and processing. 674, S. 366-374 9 S.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Effect of heat treatments on microstructure and properties of CuCrZr produced by laser-powder bed fusion

Wallis, C. & Buchmayr, B., 28 Jan 2019, in : Materials science and engineering: A, Structural materials: properties, microstructure and processing. 744.2019, January, S. 215-223 9 S.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Effect of mechanically induced structural rejuvenation on the deformation behaviour of CuZr based bulk metallic glass

Ebner, C., Pauly, S., Eckert, J. & Rentenberger, C., 31 Jan 2020, in : Materials Science and Engineering A. 773, 138848.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Effect of oxide particles on the stabilization and final microstructure in aluminium

Bachmaier, A. & Pippan, R., 2011, in : Materials science and engineering: A, Structural materials: properties, microstructure and processing. S. 7589-7595

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Effect of reverted austenite on tensile and impact strength in a martensitic stainless steel−An in-situ X-ray diffraction study

Wießner, M., Gamsjäger, E., van der Zwaag, S. & Angerer, P., 11 Nov 2016, in : Materials science and engineering: A, Structural materials: properties, microstructure and processing. 682, S. 117-125 9 S.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Effect of tempering and deep cryogenic treatment on microstructure and mechanical properties of Cr–Mo–V–Ni steel

Yan, Z., Liu, K. & Eckert, J., 10 Jun 2020, in : Materials Science and Engineering A. 787, 139520.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Effect of thermal treatment on microstructure in high pressure torsion (HPT) deformed nickel

Schafler, E. & Pippan, R., 2004, in : Materials science and engineering: A, Structural materials: properties, microstructure and processing. 387-389, S. 799-804

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Elevated temperature mechanical properties of novel ultra-fine grained Cu-Nb composites

Primorac, M-M., Abad, M. D., Hosemann, P., Kreuzeder, M., Maier, V. & Kiener, D., 2015, in : Materials science and engineering: A, Structural materials: properties, microstructure and processing. 625, S. 296-302

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Enhanced mechanical properties of Al₂O₃-C refractories with silicon hybridized expanded graphite

Wang, Q., Li, Y., Jin, S., Sang, S., Xu, Y., Xu, X. & Wang, G., 2 Jan 2018, in : Materials science and engineering: A, Structural materials: properties, microstructure and processing. 709, S. 160-171 12 S.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Erratum to "On the experimental characterization of crystal plasticity in polycrystals"

Tatschl, A. & Kolednik, O., 2004, in : Materials science and engineering: A, Structural materials: properties, microstructure and processing. A 364, S. 384-399

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Evaluation of tensile and low-cycle fatigue properties at elevated temperatures in piston aluminum-silicon alloys with and without nano-clay-particles and heat treatment

Azadi, M., Bahmanabadi, H., Gruen, F. & Winter, G., 24 Jun 2020, in : Materials Science and Engineering A. 788, 139497.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Evolution of misorientation distribution during warm 'abc' forging of commercial-purity titanium

Mironov, S. Y., Salishchev, G. A., Myshlyaev, M. M. & Pippan, R., 2006, in : Materials science and engineering: A, Structural materials: properties, microstructure and processing. 418, S. 257-267

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

FIB damage of Cu and possible consequences for miniaturized mechanical tests

Kiener, D., Motz, C., Rester, M., Jenko, M. & Dehm, G., 2007, in : Materials science and engineering: A, Structural materials: properties, microstructure and processing. 459, S. 262-272

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Friction welding of selective laser melted Ti6Al4V parts

Prashanth, K. G., Damodaram, R., Maity, T., Wang, P. & Eckert, J., 3 Aug 2017, in : Materials science and engineering: A, Structural materials: properties, microstructure and processing. 704.2017, September, S. 66-71 6 S.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

General Concept for a Stability Analysis of a Planar Interface under Rapid Solidification Conditions in Multicomponent Alloy Systems

Ludwig, A. & Pustal, B., 2001, in : Materials science and engineering: A, Structural materials: properties, microstructure and processing. S. 337-340

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Generalised ‘Jackson-Hunt’ Model for Eutectic Solidification at Low And Large Peclet Numbers And Any Binary Eutectic Phase Diagram

Ludwig, A. & Leibbrandt, S., 2004, in : Materials science and engineering: A, Structural materials: properties, microstructure and processing. S. 540-546

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Hardening and microstructure reactions in high-temperature Equal-Channel Angular Pressed Mg-Nd-Gd-Zn-Zr alloy

Li, J., Sha, G., Xu, W., Xia, K., Jie, W. & Simon, R., 2010, in : Materials science and engineering: A, Structural materials: properties, microstructure and processing. 527, S. 5092-5099

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Heat Transfer in the Single Roller Quenching Methods

Ludwig, A., 1991, in : Materials science and engineering: A, Structural materials: properties, microstructure and processing. S. 751-754

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Heterogeneous nucleation in an Al-Ni-Si alloy studied using a metallic galss technique

McKay, B., Cizek, P. & Schumacher, P., 2001, in : Materials science and engineering: A, Structural materials: properties, microstructure and processing. S. 240-244

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Hot-working behavior of an advanced intermetallic multi-phase gamma-TiAl based alloy

Schwaighofer, E., Clemens, H., Lindemann, J., Stark, A. & Mayer, S., 2014, in : Materials science and engineering: A, Structural materials: properties, microstructure and processing. 614, S. 297-310

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)