Effects of Activator Properties and Curing Conditions on Alkali-Activation of Low-Alumina Mine Tailings

Publikationen: Beitrag in FachzeitschriftArtikelForschung(peer-reviewed)

Standard

Effects of Activator Properties and Curing Conditions on Alkali-Activation of Low-Alumina Mine Tailings. / Falah, Mahroo; Obenaus-Emler, Robert; Kinnunen, Paivo; Illikainen, Mirja.

in: Waste and biomass valorization, Jahrgang 2019, 08.2019.

Publikationen: Beitrag in FachzeitschriftArtikelForschung(peer-reviewed)

Bibtex - Download

@article{7ed127d0a7a34212ac7c1c03ec4b674a,
title = "Effects of Activator Properties and Curing Conditions on Alkali-Activation of Low-Alumina Mine Tailings",
abstract = "The mining industry generates a notable amount of mine tailings (MTs). Disposal of MTs creates environmental impacts such as air pollution and the release of heavy metals into surface and underground water. The European Union (EU)-funded project “Integrated mineral technologies for more sustainable raw material supply” (ITERAMS) includes an effort to produce eco-friendly backfill materials to enhance operation and mine safety and covers for surface deposits of tailings based on geopolymerization technology. This paper investigates the effects of activator concentration, curing temperature and time on alkali-activated materials based on low-alumina MTs from the Cu/Ni mine in Northern Finland. Alkaline activators containing sodium silicate solution (Na2SiO3) at different concentrations were used and two different curing temperatures, 40 °C and 60 °C, for periods of 7, 14, and 28 days were considered. Scanning electron microscopy/energy-dispersive X-ray spectroscopy (SEM/EDS) and X-ray diffraction (XRD) were performed to investigate the structure, morphology and phase compositions of the alkali-activated products. The effect of curing temperature and alkaline solutions on mechanical strength and water absorption were investigated. The results indicate that the alkalinity and curing temperature affect the mechanical and microstructural properties of the compositions of alkali-activated MTs. The 30 wt% Na2SiO3 addition enables the alkali activated MT to improve the compressive strength with a highest value of 6.44 and 15.70 MPa after 28 days of curing at 40 °C and 60 °C, respectively. The results of this study deliver useful information for recycling and utilization of MTs as sustainable material through the alkali activation.",
keywords = "Mine tailings, Alkali-activation, Curing condition, Mechanical strength, Microstructure",
author = "Mahroo Falah and Robert Obenaus-Emler and Paivo Kinnunen and Mirja Illikainen",
year = "2019",
month = aug,
doi = "10.1007/s12649-019-00781-z",
language = "English",
volume = "2019",
journal = " Waste and biomass valorization",
issn = "1877-2641",
publisher = "Springer",

}

RIS (suitable for import to EndNote) - Download

TY - JOUR

T1 - Effects of Activator Properties and Curing Conditions on Alkali-Activation of Low-Alumina Mine Tailings

AU - Falah, Mahroo

AU - Obenaus-Emler, Robert

AU - Kinnunen, Paivo

AU - Illikainen, Mirja

PY - 2019/8

Y1 - 2019/8

N2 - The mining industry generates a notable amount of mine tailings (MTs). Disposal of MTs creates environmental impacts such as air pollution and the release of heavy metals into surface and underground water. The European Union (EU)-funded project “Integrated mineral technologies for more sustainable raw material supply” (ITERAMS) includes an effort to produce eco-friendly backfill materials to enhance operation and mine safety and covers for surface deposits of tailings based on geopolymerization technology. This paper investigates the effects of activator concentration, curing temperature and time on alkali-activated materials based on low-alumina MTs from the Cu/Ni mine in Northern Finland. Alkaline activators containing sodium silicate solution (Na2SiO3) at different concentrations were used and two different curing temperatures, 40 °C and 60 °C, for periods of 7, 14, and 28 days were considered. Scanning electron microscopy/energy-dispersive X-ray spectroscopy (SEM/EDS) and X-ray diffraction (XRD) were performed to investigate the structure, morphology and phase compositions of the alkali-activated products. The effect of curing temperature and alkaline solutions on mechanical strength and water absorption were investigated. The results indicate that the alkalinity and curing temperature affect the mechanical and microstructural properties of the compositions of alkali-activated MTs. The 30 wt% Na2SiO3 addition enables the alkali activated MT to improve the compressive strength with a highest value of 6.44 and 15.70 MPa after 28 days of curing at 40 °C and 60 °C, respectively. The results of this study deliver useful information for recycling and utilization of MTs as sustainable material through the alkali activation.

AB - The mining industry generates a notable amount of mine tailings (MTs). Disposal of MTs creates environmental impacts such as air pollution and the release of heavy metals into surface and underground water. The European Union (EU)-funded project “Integrated mineral technologies for more sustainable raw material supply” (ITERAMS) includes an effort to produce eco-friendly backfill materials to enhance operation and mine safety and covers for surface deposits of tailings based on geopolymerization technology. This paper investigates the effects of activator concentration, curing temperature and time on alkali-activated materials based on low-alumina MTs from the Cu/Ni mine in Northern Finland. Alkaline activators containing sodium silicate solution (Na2SiO3) at different concentrations were used and two different curing temperatures, 40 °C and 60 °C, for periods of 7, 14, and 28 days were considered. Scanning electron microscopy/energy-dispersive X-ray spectroscopy (SEM/EDS) and X-ray diffraction (XRD) were performed to investigate the structure, morphology and phase compositions of the alkali-activated products. The effect of curing temperature and alkaline solutions on mechanical strength and water absorption were investigated. The results indicate that the alkalinity and curing temperature affect the mechanical and microstructural properties of the compositions of alkali-activated MTs. The 30 wt% Na2SiO3 addition enables the alkali activated MT to improve the compressive strength with a highest value of 6.44 and 15.70 MPa after 28 days of curing at 40 °C and 60 °C, respectively. The results of this study deliver useful information for recycling and utilization of MTs as sustainable material through the alkali activation.

KW - Mine tailings

KW - Alkali-activation

KW - Curing condition

KW - Mechanical strength

KW - Microstructure

U2 - 10.1007/s12649-019-00781-z

DO - 10.1007/s12649-019-00781-z

M3 - Article

VL - 2019

JO - Waste and biomass valorization

JF - Waste and biomass valorization

SN - 1877-2641

ER -