Evaluation of different alloying concepts to trace non-metallic inclusions by adding rare earths on a laboratory scale

Publikationen: Beitrag in FachzeitschriftArtikelForschung(peer-reviewed)

Externe Organisationseinheiten

  • Christian Doppler Labor für Einschlussmetallurgie in der modernen Stahlherstellung, Leoben

Abstract

Different alloying concepts to trace deoxidation products, mainly aluminium oxides, using rare earth elements (REEs), were tested on the laboratory scale by melting trials with a high-frequency remelting furnace. Lanthanum and Cerium, which belong to the group of light REEs, were used for these experiments. The formed multiphase inclusions were characterized by scanning electron microscopy with energy dispersive spectroscopy. Concerning the higher atomic numbers of REEs, traced non-metallic inclusions (NMIs) seem brighter than the steel matrix compared to deoxidation products. REE-traced aluminium oxides showed a primarily heterogeneous and almost globular morphology. The mean equivalent circle diameter of REE-containing NMIs is for all trials similar and is about 2 µm. The experimental results pointed out that the recovery rates of the various alloying concepts differ only slightly. In contrast, the values mainly depend on the surface-tovolume ratio and the amount of oxygen in the melt.

Details

OriginalspracheEnglisch
Seitenumfang10
FachzeitschriftIronmaking and steelmaking
Jahrgang2022 ???
Ausgabenummer??? Stand: 30.Dezember 2022
DOIs
StatusElektronische Veröffentlichung vor Drucklegung. - 27 Sep. 2022