Tandem Probe Analysis Mode for Synchrotron XFM: Doubling Throughput Capacity

Publikationen: Beitrag in FachzeitschriftArtikelForschung(peer-reviewed)


  • Casey L. Doolette
  • Daryl L. Howard
  • Nader Afshar
  • Cameron M. Kewish
  • David J. Paterson
  • Jianyin Huang
  • Jakob Santner
  • Walter W. Wenzel
  • Tom Raimondo
  • Alexander T. De Vries Van Leeuwen
  • Lei Hou
  • Frederik van der Bom
  • Han Weng
  • Peter M. Kopittke
  • Enzo Lombi

Externe Organisationseinheiten

  • University of South Australia
  • Australian Synchrotron
  • La Trobe University
  • The University of Queensland
  • Universität für Bodenkultur Wien : Standort Tulln


Synchrotron-based X-ray fluorescence microscopy (XFM) analysis is a powerful technique that can be used to visualize elemental distributions across a broad range of sample types. Compared to conventional mapping techniques such as laser ablation inductively coupled plasma mass spectrometry or benchtop XFM, synchrotron-based XFM provides faster and more sensitive analyses. However, access to synchrotron XFM beamlines is highly competitive, and as a result, these beamlines are often oversubscribed. Therefore, XFM experiments that require many large samples to be scanned can penalize beamline throughput. Our study was largely driven by the need to scan large gels (170 cm2) using XFM without decreasing beamline throughput. We describe a novel approach for acquiring two sets of XFM data using two fluorescence detectors in tandem; essentially performing two separate experiments simultaneously. We measured the effects of tandem scanning on beam quality by analyzing a range of contrasting samples downstream while simultaneously scanning different gel materials upstream. The upstream gels were thin (<200 μm) diffusive gradients in thin-film (DGT) binding gels. DGTs are passive samplers that are deployed in water, soil, and sediment to measure the concentration and distribution of potentially bioavailable nutrients and contaminants. When deployed on soil, DGTs are typically small (2.5 cm2), so we developed large DGTs (170 cm2), which can be used to provide extensive maps to visualize the diffusion of fertilizers in soil. Of the DGT gel materials tested (bis-acrylamide, polyacrylamide, and polyurethane), polyurethane gels were most suitable for XFM analysis, having favorable handling, drying, and analytical properties. This gel type enabled quantitative (>99%) transmittance with minimal (<3%) flux variation during raster scanning, whereas the other gels had a substantial effect on the beam focus. For the first time, we have (1) used XFM for mapping analytes in large DGTs and (2) developed a tandem probe analysis mode for synchrotron-based XFM, effectively doubling throughput. The novel tandem probe analysis mode described here is of broad applicability across many XFM beamlines as it could be used for future experiments where any uniform, highly transmissive sample could be analyzed upstream in the "background"of downstream samples.


Seiten (von - bis)4584-4593
FachzeitschriftAnalytical chemistry
StatusVeröffentlicht - 11 Mär 2022