Acta materialia, 1359-6454

Journal

ISSNs1359-6454
Additional searchable ISSN (Electronic)1873-2453

Research output

  1. Article › Research › Peer-reviewed
  2. Published

    30 nm X-ray focusing correlates oscillatory stress, texture and structural defect gradients across multilayered Ti N-SiOx thin film

    Keckes, J., Daniel, R., Todt, J., Zalesak, J., Sartory, B., Braun, S., Gluch, J., Rosenthal, M., Burghammer, M. C., Mitterer, C., Niese, S. & Kubec, A., 2018, In : Acta materialia. 144, p. 862-873

    Research output: Contribution to journalArticleResearchpeer-review

  3. Published

    A Thick-Interface Model for Diffusive and Massive Phase Transformation in Substitutional Alloys

    Svoboda, J., Vala, J., Gamsjäger, E. & Fischer, F. D., 2006, In : Acta materialia. 54, p. 3953-3960

    Research output: Contribution to journalArticleResearchpeer-review

  4. Published

    A Transmission Electron Microscopy study of the neutron-irradiation response of Ti-based MAX phases at high temperatures

    Tunes, M. A., Harrison, R. W., Donnelly, S. E. & Edmondson, P. D., 8 Mar 2019, In : Acta Materialia. 169.2019, May, p. 237-247 11 p.

    Research output: Contribution to journalArticleResearchpeer-review

  5. Published

    A Variational Approach to Grooving and Wetting

    Hackl, K., Fischer, F. D., Klevakina, K., Renner, J. & Svoboda, J., 2013, In : Acta materialia. 61, p. 1581-1591

    Research output: Contribution to journalArticleResearchpeer-review

  6. Published

    A combined experimantal and computational study of deformation in grains of biomedical grade 316LVM stainless steel

    You, X., Connolley, T., McHugh, P. E., Cuddy, H. & Motz, C., 2006, In : Acta materialia. 54, p. 4825-4840

    Research output: Contribution to journalArticleResearchpeer-review

  7. Published

    A direct method of determining complex depth profiles of residual stresses in thin films on a nanoscale

    Massl, S., Keckes, J. & Pippan, R., 2007, In : Acta materialia. 55, p. 4835-4844

    Research output: Contribution to journalArticleResearchpeer-review

  8. Published

    A further step towards an understanding of size-dependent crystal plasticity: In-situ tension experiments of miniaturized single crystal copper samples

    Kiener, D., Grosinger, W., Dehm, G. & Pippan, R., 2008, In : Acta materialia. 56, p. 580-592

    Research output: Contribution to journalArticleResearchpeer-review

  9. Published

    A model for evolution of shape changing precipitates in multicomponent systems

    Svoboda, J., Fischer, F. D. & Mayrhofer, P. H., 2008, In : Acta materialia. 56, p. 4896-4904

    Research output: Contribution to journalArticleResearchpeer-review

  10. Published

    A new Treatment of transient grain growth

    Svoboda, J., Fratzl, P., Zickler, G. & Fischer, F. D., 2016, In : Acta materialia. 115, p. 442-447

    Research output: Contribution to journalArticleResearchpeer-review

  11. Published

    A new approach to modelling of non-steady grain growth

    Svoboda, J. & Fischer, F. D., 2007, In : Acta materialia. 55, p. 4467-4474

    Research output: Contribution to journalArticleResearchpeer-review

  12. Published

    A note on the contact conditions at migrating interfaces

    Gamsjäger, E., 2007, In : Acta materialia. 55, p. 4823-4833

    Research output: Contribution to journalArticleResearchpeer-review

  13. Published

    A variational approach to the modelling of grooving in a three-dimensional setting

    Hackl, K., Fischer, F. D. & Svoboda, J., 2017, In : Acta materialia. 129, p. 331-342

    Research output: Contribution to journalArticleResearchpeer-review

  14. Published

    Achieving the ideal strength in annealed Molybdenum nanopillars

    Lowry, M. B., Kiener, D., Le Blanc, B. B., Chisholm, C., Florando, J. N., Morris, J. W. J. & Minor, A. M., 2010, In : Acta materialia. 58, p. 5160-5167

    Research output: Contribution to journalArticleResearchpeer-review

  15. Published

    Adhesion Energies of Cr Thin Films on Polyimide Determined from Buckling: Experiment and Model

    Cordill, M., Fischer, F. D., Rammerstorfer, F. G. & Dehm, G., 2010, In : Acta materialia. 58, p. 5520-5531

    Research output: Contribution to journalArticleResearchpeer-review

  16. Published

    Anisotropic deformation characteristics of an ultrafine- and nanolamellar pearlitic steel

    Kapp, M. W., Hohenwarter, A., Wurster, S., Yang, B. & Pippan, R., 1 Mar 2016, In : Acta materialia. 106, p. 239-248 10 p.

    Research output: Contribution to journalArticleResearchpeer-review

  17. Published

    Anneal hardening and elevated temperature strain rate sensitivity of nanostructured metals: Their relation to intergranular dislocation accommodation

    Renk, O., Maier-Kiener, V., Issa, I., Li, J. H., Kiener, D. & Pippan, R., 15 Feb 2019, In : Acta materialia. 165.2019, February, p. 409-419 11 p.

    Research output: Contribution to journalArticleResearchpeer-review

  18. Published

    Application of the thermodynamic extremal principle to the diffusional phase transformation

    Svoboda, J., Gamsjäger, E., Fischer, F. D. & Fratzl, P., 2004, In : Acta materialia. 52, p. 959-967

    Research output: Contribution to journalArticleResearchpeer-review

  19. Published

    Aspect ratio and stochastic effects in the plasticity of uniformly loaded micrometer-sized specimens

    Senger, J., Weygand, D., Motz, C., Gumbsch, P. & Kraft, O., 2011, In : Acta materialia. p. 2937-2947

    Research output: Contribution to journalArticleResearchpeer-review

  20. Published

    Asymmetric crack wake plasticity - a reason for roughness induced crack closure

    Pippan, R., Strobl, G., Kreuzer, H. & Motz, C., 2004, In : Acta materialia. 52, p. 4493-4502

    Research output: Contribution to journalArticleResearchpeer-review

  21. Published

    Atomic relaxation processes in an intermetallic Ti-43Al-4Nb-1Mo-0.1B alloy studied by mechanical spectroscopy

    Juan, J. S., Simas, P., Schmölzer, T., Clemens, H., Mayer, S. & No, M. L., 2014, In : Acta materialia. 65, p. 338-350

    Research output: Contribution to journalArticleResearchpeer-review

  22. Published

    Atomistic origins of the differences in anisotropic fracture behaviour of LiTaO3 and LiNbO3 single crystals

    Gruber, M., Konetschnik, R., Popov, M., Spitaler, J., Supancic, P. H., Kiener, D. & Bermejo, R., 15 May 2018, In : Acta Materialia. 150, p. 373-380 8 p.

    Research output: Contribution to journalArticleResearchpeer-review

  23. Published
  24. Published

    Comparison of Dendrites of a Pure Material with Thermal Alloy Dendrites: an Experimental Method to Estimate the T0-Temperature

    Ludwig, A., 2001, In : Acta materialia. p. 165-169

    Research output: Contribution to journalArticleResearchpeer-review

  25. Published

    Complementary ab initio and X-ray nanodiffraction studies of Ta2O5

    Hollerweger, R., Holec, D., Paulitsch, J., Bartosik, M., Daniel, R., Rachbauer, R., Polcik, P., Keckes, J., Krywka, C., Euchner, H. & Mayrhofer, P. H., 2015, In : Acta Materialia.

    Research output: Contribution to journalArticleResearchpeer-review

  26. Published

    Complementary ab initio and X-ray nanodiffraction studies of Ta2 O5

    Hollerweger, R., Holec, D., Paulitsch, J., Bartosik, M., Daniel, R., Rachbauer, R., Polcik, P., Keckes, J., Krywka, C., Euchner, H. & Mayrhofer, P., 2015, In : Acta materialia. 83, p. 276-284

    Research output: Contribution to journalArticleResearchpeer-review

  27. Published

    Correlative characterization on microstructure evolution of Ni-based K403 alloy during thermal exposure

    Liu, J., Li, J., Hage, F., Ghosh, P., Li, J., Wang, W., Chen, Z., Wang, T., Tang, W., Ramasse, Q. & Schumacher, P., 2017, In : Acta materialia. 131.2017, June, p. 169-186 18 p.

    Research output: Contribution to journalArticleResearchpeer-review

  28. Published

    Cross-sectional structure-property relationship in a graded nanocrystalline Ti1-xAlxN thin film

    Zalesak, J., Bartosik, M., Daniel, R., Mitterer, C., Krywka, C., Kiener, D., Mayrhofer, P. H. & Keckes, J., 2016, In : Acta materialia. 102, p. 212-219 8 p.

    Research output: Contribution to journalArticleResearchpeer-review

  29. Published

    Crystal orientation changes: a comparison of crystal plasticity finite element study and experimental results

    Rehrl, C., Völker, B., Kleber, S., Antretter, T. & Pippan, R., 2012, In : Acta materialia. p. 2379-2386

    Research output: Contribution to journalArticleResearchpeer-review

  30. Published

    Crystallographic orientation dependent maximum layer thickness of cubic AlN in CrN / AlN multilayers

    Chen, Z., Holec, D., Bartosik, M., Mayrhofer, P. H. & Zhang, Z., 2019, In : Acta materialia. 168.2019, 15 April, p. 190-202 13 p.

    Research output: Contribution to journalArticleResearchpeer-review

  31. Published

    Cyclic bending experiments on free-standing Cu micron lines observed by electron backscatter diffraction

    Wimmer, A. C., Heinz, W., Detzel, T., Robl, W., Nellessen, M., Kirchlechner, C. & Dehm, G., 2015, In : Acta materialia. 83, p. 460-469

    Research output: Contribution to journalArticleResearchpeer-review

  32. Published

    Defining the tensile properties of Al-12Si parts produced by selective laser melting

    Prashanth, K. G., Scudino, S. & Eckert, J., 1 Mar 2017, In : Acta materialia. 126, p. 25-35 11 p.

    Research output: Contribution to journalArticleResearchpeer-review

  33. Published

    Deformation Mechanisms in Micron-Sized PST-TiAl Compression Samples: Experiment and Model

    Rester, M., Fischer, F. D., Kirchlechner, C., Schmölzer, T., Clemens, H. & Dehm, G., 2011, In : Acta materialia. 59, p. 3410-3421

    Research output: Contribution to journalArticleResearchpeer-review

  34. Published

    Deformation in the y-Mg17Al12 phase at 25-278 °C

    Mathur, H. N., Maier-Kiener, V. & Korte, S., 2016, In : Acta materialia. 113, p. 221-229 9 p.

    Research output: Contribution to journalArticleResearchpeer-review

  35. Published

    Deformation-induced phase transformation in a Co-Cr-W-Mo alloy studied by high-energy X-ray diffraction during in-situ compression tests

    Weißensteiner, I., Petersmann, M., Erdely, P., Stark, A., Antretter, T., Clemens, H. & Maier-Kiener, V., Feb 2019, In : Acta materialia. 164.2019, February, p. 272-282 11 p.

    Research output: Contribution to journalArticleResearchpeer-review

  36. Published

    Derivation of the Phase Field Equations from the Thermodynamic Extremal Principle

    Svoboda, J., Fischer, F. D. & McDowell, D. L., 2012, In : Acta materialia. 60, p. 396-406

    Research output: Contribution to journalArticleResearchpeer-review

  37. Published

    Design strategy for controlled natural aging in Al–Mg–Si alloys

    Werinos, M., Antrekowitsch, H., Prillhofer, R., Ebner, T., Curtin, W. A., Uggowitzer, P. J. & Pogatscher, S., 1 Oct 2016, In : Acta materialia. 118, p. 296-305 10 p.

    Research output: Contribution to journalArticleResearchpeer-review

  38. Published

    Detailed Modelling of Delamination Buckling of Thin Film Under Global Tension

    Toth, F., Rammerstorfer, F. G., Cordill, M. & Fischer, F. D., 2013, In : Acta materialia. 61, p. 2425-2433

    Research output: Contribution to journalArticleResearchpeer-review

  39. Published

    Differences in deformation behavior of bicrystalline Cu micropillars containing a twin boundary or a large-angle grain boundary

    Imrich, P., Kirchlechner, C., Motz, C. & Dehm, G., 2014, In : Acta materialia. 73, p. 240-250

    Research output: Contribution to journalArticleResearchpeer-review

  40. Published

    Diffusion Processes in a Migrating Interface – The Thick Interface Model

    Svoboda, J., Gamsjäger, E., Fischer, F. D., Liu, Y. & Kozeschnik, E., 2011, In : Acta materialia. 59, p. 4775-4786

    Research output: Contribution to journalArticleResearchpeer-review

  41. Published

    Diffusion and Creep in Multi-Component Alloys with Non-Ideal Sources and Sinks for Vacancies

    Svoboda, J., Fischer, F. D. & Fratzl, P., 2006, In : Acta materialia. 54, p. 3043-3053

    Research output: Contribution to journalArticleResearchpeer-review

  42. Published

    Diffusional constrained crystal nucleation during peritectic phase transitions

    Griesser, S., Reid, M., Bernhard, C. & Dippenaar, R., 2014, In : Acta materialia. 67, p. 335-341

    Research output: Contribution to journalArticleResearchpeer-review

  43. Published

    Direct Observation of Solidification Microstructures around Absolute Stability

    Ludwig, A. & Kurz, W., 1996, In : Acta materialia. p. 3643-3648

    Research output: Contribution to journalArticleResearchpeer-review

  44. Published

    Discrete dislocation simulation of nanoindentation: Indentation size effect and the influence of slip band orientation

    Kreuzer, H. G. M. & Pippan, R., 2007, In : Acta materialia. 55, p. 3229-3235

    Research output: Contribution to journalArticleResearchpeer-review

  45. Published

    Dominating deformation mechanisms in ultrafine-grained chromium across length scales and temperatures

    Fritz, R., Wimler, D., Leitner, A., Maier-Kiener, V. & Kiener, D., 1 Nov 2017, In : Acta materialia. 140, p. 176-187 12 p.

    Research output: Contribution to journalArticleResearchpeer-review

  46. Published

    Dynamic properties of major shear bands in Zr-Cu-Al bulk metallic glasses

    Thurnheer, P., Maaß, R., Laws, K. J., Pogatscher, S. & Löffler, J. F., 29 Jul 2015, In : Acta materialia. 96, p. 428-436 9 p.

    Research output: Contribution to journalArticleResearchpeer-review

  47. Published

    Effect of Cu on the evolution of precipitation in an Fe-Cr-Ni-Al-Ti maraging steel

    Schnitzer, R., Schober, M., Zinner, S. & Leitner, H., 2010, In : Acta materialia. 58, p. 3733-3741

    Research output: Contribution to journalArticleResearchpeer-review

  48. Published

    Effect of SiC reinforcement particles on the grain density in a magnesium-based metal-matrix composite: Modelling and experiment

    Lelito, J., Pawel L., Z., Shirzadi, A. A., Greer, A. L., Krajewski, W. K., Suchy, J. S., Faerber, K. & Schumacher, P., 2012, In : Acta materialia. 60, p. 2950-2958

    Research output: Contribution to journalArticleResearchpeer-review

  49. Published

    Effect of hot rolling and primary annealing on the microstructure and texture of a β-stabilised γ-TiAl based alloy

    Erdely, P., Staron, P., Maawad, E., Schell, N., Klose, J., Mayer, S. & Clemens, H., 2017, In : Acta materialia. 126, p. 145-153 9 p.

    Research output: Contribution to journalArticleResearchpeer-review

  50. Published

    Effect of nucleation undercooling on the kinetics and mechanism of the peritectic phase transition in steel

    Griesser, S., Bernhard, C. & Dippenaar, R., 1 Jan 2014, In : Acta Materialia. 81, p. 111-120 10 p.

    Research output: Contribution to journalArticleResearchpeer-review

  51. Published

    Effect of processing temperature on the microstructural characteristics of Cu-Ag nanocomposites: From supersaturation to complete phase decomposition

    Kormout, K. S., Ghosh, P., Bachmaier, A., Hohenwarter, A. & Pippan, R., 8 May 2018, In : Acta Materialia. 154.2018, 1 August, p. 33-44 12 p.

    Research output: Contribution to journalArticleResearchpeer-review

  52. Published

    Effect of specimen size on the tensile strength of WC–Co hard metal

    Klünsner, T., Wurster, S., Supancic, P., Ebner, R., Jenko, M., Glätzle, J., Püschel, A. & Pippan, R., 2011, In : Acta materialia. 59, p. 4244-4252

    Research output: Contribution to journalArticleResearchpeer-review

  53. Published

    Effects of trace elements (Y and Ca) on the eutectic Ge in Al–Ge based alloys

    Li, J., Wanderka, N., Balogh, Z., Stender, P., Kropf, H., Albu, M., Tsunekawa, Y., Hofer, F., Schmitz, G. & Schumacher, P., 2016, In : Acta materialia. 111, p. 85-95 11 p.

    Research output: Contribution to journalArticleResearchpeer-review

  54. Published

    Elastoplastic Buckling as Source of Misinterpretation of Micropillar-Tests

    Daum, B., Dehm, G., Clemens, H., Rester, M., Fischer, F. D. & Rammerstorfer, F. G., 2013, In : Acta materialia. 61, p. 4996-5007

    Research output: Contribution to journalArticleResearchpeer-review

  55. Published

    Electric-field-induced structural changes in multilayer piezoelectric actuators during electrical and mechanical loading

    Esteves, G., Fancher, C. M., Röhrig, S., Maier, G. A., Jones, J. L. & Deluca, M., 2017, In : Acta materialia. 132, p. 96-105 10 p.

    Research output: Contribution to journalArticleResearchpeer-review

  56. Published

    Energetic Balance and Kinetics for the Decomposition of Supersaturated Ti1-XAlXN

    Mayrhofer, P. H., Fischer, F. D., Böhm, H. J., Mitterer, C. & Schneider, J. M., 2007, In : Acta materialia. 55, p. 1441-1446

    Research output: Contribution to journalArticleResearchpeer-review

  57. Published

    Epitaxy and Bonding of Cu Films on Oxygen-Terminated a-Al2O3 (0001) Surfaces

    Oh, S. H., Scheu, C., Wagner, T., Tchernychova, E. & Rühle, M., 2006, In : Acta materialia. 54, p. 2685-2696

    Research output: Contribution to journalArticleResearchpeer-review

  58. Published

    Equal channel angular pressing of metal matrix composites: Effect on particle distribution and fracture toughness

    Sabirov, I., Kolednik, O., Valiev, R. Z. & Pippan, R., 2005, In : Acta materialia. 53, p. 4919-4930

    Research output: Contribution to journalArticleResearchpeer-review

  59. Published

    Evolution of structure and residual stress of a fcc/hex-AlCrN multi-layered system upon thermal loading revealed by cross-sectional X-ray nano-diffraction

    Jäger, N., Klima, S., Hruby, H., Julin, J., Burghammer, M., Keckes, J., Mitterer, C. & Daniel, R., 2019, In : Acta materialia. 162.2019, 1, p. 55-66 12 p.

    Research output: Contribution to journalArticleResearchpeer-review

  60. Published

    Evolution of the ordered omega phase in a beta-stabilized multi-phase TiAl alloy and its effect on hardness

    Schloffer, M., Rashkova, B., Schöberl, T., Schwaighofer, E., Zhang, Z., Clemens, H. & Mayer, S., 2014, In : Acta materialia. 64, p. 241-252

    Research output: Contribution to journalArticleResearchpeer-review

  61. Published

    Expected and unexpected plastic behavior at the micron scale: An in situ μLaue tensile study

    Kirchlechner, C., Imrich, P., Grosinger, W., Kapp, M., Keckes, J., Micha, J-S., Ulrich, O., Thomas, O., Labat, S., Motz, C. & Dehm, G., 2012, In : Acta materialia. 60, p. 1252-1258

    Research output: Contribution to journalArticleResearchpeer-review

  62. Published

    Experimental and computational study on the effect of Yttrium on the phase stability of sputtered Cr-Al-Y-N hard coatings

    Rovere, F., Music, D., Schneider, J. M. & Mayrhofer, P. H., 2010, In : Acta materialia. 58, p. 2708-2715

    Research output: Contribution to journalArticleResearchpeer-review

  63. Published

    Experimental and theoretical evidence of displacive martensite in an intermetallic Mo-containing Ƴ-TiAl based alloy

    Mayer, S., Petersmann, M., Fischer, F. D., Clemens, H., Waitz, T. & Antretter, T., 2016, In : Acta materialia. 115, p. 242-249 8 p.

    Research output: Contribution to journalArticleResearchpeer-review

  64. Published

    FIB-induced dislocations in Al submicron pillars: Annihilation by thermal annealing and effects on deformation behavior

    Lee, S., Jeong, J., Kim, Y., Han, S. M., Kiener, D. & Oh, S. H., 15 May 2016, In : Acta materialia. 110, p. 283-294 12 p.

    Research output: Contribution to journalArticleResearchpeer-review

  65. Published

    Fatigue crack growth anisotropy in ultrafine-grained iron

    Leitner, T., Hohenwarter, A., Ochensberger, W. & Pippan, R., 1 Mar 2017, In : Acta materialia. 126, p. 154-165 12 p.

    Research output: Contribution to journalArticleResearchpeer-review

  66. Published

    First-principles study of the thermodynamic and elastic properties of eutectic Fe-Ti alloys

    Zhu, L. -F., Friák, M., Dick, A., Grabowski, B., Hickel, T., Liot, F., Holec, D., Schlieter, A., Kühn, U., Eckert, J., Ebrahimi, Z., Emmerich, H. & Neugebauer, J., 2012, In : Acta materialia. 60, p. 1594-1602

    Research output: Contribution to journalArticleResearchpeer-review

  67. Published

    Formation of Multiple Stoichiometric Phases in Binary Systems by Combined Bulk and Grain Boundary Diffusion – Experiments and Model

    Fischer, F. D., Svoboda, J. & Schillinger, W., 2013, In : Acta materialia. 61, p. 32-39

    Research output: Contribution to journalArticleResearchpeer-review

  68. Published

    Fracture behavior and deformation mechanisms in nanolaminated crystalline/amorphous micro-cantilevers

    Wang, Y. Q., Fritz, R., Kiener, D., Zhang, J. Y., Liu, G., Kolednik, O., Pippan, R. & Sun, J., 7 Sep 2019, In : Acta Materialia. 180.2019, November, p. 73-83 11 p.

    Research output: Contribution to journalArticleResearchpeer-review

  69. Published

    Fracture of ECAP-deformed iron and the role of extrinsic toughening mechanisms

    Hohenwarter, A. & Pippan, R., 2013, In : Acta materialia. 61, p. 2973-2983

    Research output: Contribution to journalArticleResearchpeer-review

  70. Published

    From Distribution Functions to evolution equations for grain growth and coasening

    Fischer, F. D., Svoboda, J., Gamsjäger, E. & Oberaigner, E., 2008, In : Acta materialia. 56, p. 5395-5400

    Research output: Contribution to journalArticleResearchpeer-review

  71. Published

    Generalization of the Lifshitz–Slyozov–Wagner Coarsening Theory to Non-dilute Multi-component Systems

    Svoboda, J. & Fischer, F. D., 2014, In : Acta materialia. 79, p. 304-314

    Research output: Contribution to journalArticleResearchpeer-review

  72. Published

    Grain boundary design of thin films: Using tilted brittle interfaces for multiple crack deflection toughening

    Daniel, R., Meindlhumer, M., Baumegger, W., Zalesak, J., Sartory, B., Burghammer, M., Mitterer, C. & Keckes, J., 2017, In : Acta materialia. 122, p. 130-137 8 p.

    Research output: Contribution to journalArticleResearchpeer-review

  73. Published

    Grain boundary excess volume and defect annealing of copper after high-pressure torsion

    Oberdorfer, B., Setman, D., Steyskal, E. M., Hohenwarter, A., Sprengel, W., Zehetbauer, M., Pippan, R. & Würschum, R., 15 Apr 2014, In : Acta materialia. 68, p. 189-195 7 p.

    Research output: Contribution to journalArticleResearchpeer-review

  74. Published

    Grain boundary excess volume and defect annelaing of copper after high pressure torsion

    Oberdorfer, B., Setman, D., Steyskal, E-M., Hohenwarter, A., Sprengel, W., Zehetbauer, M., Pippan, R. & Würschum, R., 2014, In : Acta materialia. 68, p. 189-195

    Research output: Contribution to journalArticleResearchpeer-review

  75. Published

    Grain refinement of hypoeutectic Al-Si alloys with B

    Chen, Z., Kang, H., Fan, G., Li, J., Lu, Y., Jie, J., Zhang, Y., Li, T., Jian, X. & Wang, T., 2016, In : Acta materialia. 120, p. 168 178 p.

    Research output: Contribution to journalArticleResearchpeer-review

  76. Published

    High Temperature Mechanical Behaviour of Flaw Tolerant Almunia-Zirconia Multilayered Ceramics

    Bermejo Moratinos, R., Sánchez-Herencia, A. J., Llanes, L. & Baudín, C., 2007, In : Acta materialia. 55, p. 4891-4901

    Research output: Contribution to journalArticleResearchpeer-review

  77. Published

    High carbon solubility in a y-TiAl-based Ti-45Al-5Nb-0.5C alloy and its effect on hardening

    Scheu, C., Stergar, E., Schober, M., Cha, L., Clemens, H., Bartels, C., Schimansky, F. -P. & Cerezo, A., 2009, In : Acta materialia. 57, p. 1504-1511

    Research output: Contribution to journalArticleResearchpeer-review

  78. Published

    High resolution determination of local residual stress gradients in single- and multilayer thin film systems

    Treml, R., Kozic, D., Zechner, J., Maeder, X., Gänser, H-P., Schöngrundner, R., Michler, J., Brunner, R. & Kiener, D., 2016, In : Acta materialia. 103, p. 616-623

    Research output: Contribution to journalArticleResearchpeer-review

  79. Published

    Impact of instrumental constraints and imperfections on the dislocation structure in micron-sized Cu compression pillars

    Kirchlechner, C., Keckes, J., Motz, C., Grosinger, W., Kapp, M. W., Micha, J-S., Ulrich, O. & Dehm, G., 2011, In : Acta materialia. 59, p. 5618-5626

    Research output: Contribution to journalArticleResearchpeer-review

  80. Published

    Improved thermodynamic Treatment of vacancy-mediated diffusion

    Fischer, F. D., Hackl, K. & Svoboda, J., 2016, In : Acta materialia. 108, p. 347-354

    Research output: Contribution to journalArticleResearchpeer-review

  81. Published

    Improvements of Strength and Fracture Restistance by Spatial Material Property Variations

    Kolednik, O., Predan, J., Fischer, F. D. & Fratzl, P., 2014, In : Acta materialia. 68, p. 279-294

    Research output: Contribution to journalArticleResearchpeer-review

  82. Published

    In situ TEM straining of single crystal Au films on polyimide: Change of deformation mechanisms at the nanoscale

    Oh, S. H., Legros, M., Kiener, D., Gruber, P. A. & Dehm, G., 2007, In : Acta materialia. 55, p. 5558-5571

    Research output: Contribution to journalArticleResearchpeer-review

  83. Published

    In situ TEM study of Bauschinger Effect in Freestanding Nanocrystalline Gold Films

    Rajagoplan, J., Rentenberger, C., Karnthaler, H. P. & Dehm, G., 2010, In : Acta materialia. 58, p. 4772-4782

    Research output: Contribution to journalArticleResearchpeer-review

  84. Published

    In situ and atomic-scale investigations of the early stages of γ precipitate growth in a supersaturated intermetallic Ti-44Al-7Mo (at.%) solid solution

    Erdely, P., Staron, P., Stark, A., Klein, T., Clemens, H. & Mayer, S., Feb 2019, In : Acta materialia. 164.2019, February, p. 110-121 12 p.

    Research output: Contribution to journalArticleResearchpeer-review

  85. Published

    In situ observation of austenite–ferrite interface migration in a lean Mn steel during cyclic partial phase transformations

    Chen, H., Gamsjäger, E., Schider, S., Khanbareh, H. & van der Zwaag, S., 2013, In : Acta materialia. 61, p. 2414-2424

    Research output: Contribution to journalArticleResearchpeer-review

  86. E-pub ahead of print

    In-situ TEM observation of {101¯2} twin-dominated deformation of Mg pillars: Twinning mechanism, size effects and rate dependency

    Jeong, J., Alfreider, M., Konetschnik, R., Kiener, D. & Oh, S. H., 18 Jul 2018, In : Acta Materialia. 158.2018, 1 October, p. 407-421 15 p.

    Research output: Contribution to journalArticleResearchpeer-review

  87. Published

    In-situ observation of coupled peritectic growth in a binary organic model alloy

    Ludwig, A., Mogeritsch, J. P. & Pfeifer, T., 1 Mar 2017, In : Acta Materialia. 126, p. 329-335 7 p.

    Research output: Contribution to journalArticleResearchpeer-review

  88. Published
  89. Published

    Influence of Diffusional Stress Relaxation on Growth of Stoichiometric Precipitates in Binary Systems

    Svoboda, J., Gamsjäger, E. & Fischer, F. D., 2006, In : Acta materialia. 54, p. 4575-4581

    Research output: Contribution to journalArticleResearchpeer-review

  90. Published

    Influence of bulk energy and triple junction mobility on interface kinetics - A tool for interpretation of experiments

    Hackl, K., Khan, A. U., Fischer, F-D. & Svoboda, J., 2019, In : Acta materialia. 174.2019, August, p. 310-318 9 p.

    Research output: Contribution to journalArticleResearchpeer-review

  91. Published

    Influence of ejection temperature on structure and glass transition behavior for Zr-based rapidly quenched disordered alloys

    Wang, X. H., Inoue, A., Kong, F. L., Zhu, S. L., Stoica, M., Kaban, I., Chang, C. T., Shalaan, E., Al-Marzouki, F. & Eckert, J., 1 Sep 2016, In : Acta materialia. 116, p. 370-381 12 p.

    Research output: Contribution to journalArticleResearchpeer-review

  92. Published

    Influence of impurities and deformation temperature on the saturation microstructure and ductility of HPT-deformed nickel

    Rathmayer, G. & Pippan, R., 2011, In : Acta materialia. p. 7228-7240

    Research output: Contribution to journalArticleResearchpeer-review

  93. Published

    Influence of interrupted quenching on artificial aging of Al–Mg–Si alloys

    Pogatscher, S., Antrekowitsch, H., Leitner, H., Pöschmann, D., Zhang, Z. & Uggowitzer, P. J., 2012, In : Acta materialia. 60, p. 4496-4505

    Research output: Contribution to journalArticleResearchpeer-review

  94. Published

    Influence of modulus-to-hardness ratio and harmonic parameters on continuous stiffness measurement during nanoindentation

    Merle, B., Maier-Kiener, V. & Pharr, G. M., 2017, In : Acta materialia. 134, p. 167-176

    Research output: Contribution to journalArticleResearchpeer-review

  95. Published

    Influence of solute segregation and drag on properties of migrating interfaces

    Gamsjäger, E., Fischer, F. D. & Svoboda, J., 2002, In : Acta materialia. 50, p. 967-977

    Research output: Contribution to journalArticleResearchpeer-review

  96. Published

    Influence of varying nitrogen partial pressures on microstructure, mechanical and optical properties of sputtered TiAlON coatings

    Schalk, N., Simonet Fotso, J., Holec, D., Jakopic, G., Fian, A., Terziyska, V., Daniel, R. & Mitterer, C., 2016, In : Acta materialia. 119, p. 26-34 9 p.

    Research output: Contribution to journalArticleResearchpeer-review

  97. Published

    Initial dislocation structures in 3-D discrete dislocation dynamics and their influence on microscale plasticity

    Motz, C., Weygand, D., Senger, J. & Gumbsch, P., 2009, In : Acta materialia. 57, p. 1744-1754

    Research output: Contribution to journalArticleResearchpeer-review

  98. Published

    Interdependent Effect of Chemical Composition and Thermal History on Artificial Aging of AA6061

    Pogatscher, S., Antrekowitsch, H. & Uggowitzer, P. J., 2012, In : Acta materialia. 60, p. 5545-5554

    Research output: Contribution to journalArticleResearchpeer-review

  99. Published

    Interface dominated mechanical properties of ultra-fine grained and nanoporous Au at elevated temperatures

    Leitner, A., Maier-Kiener, V., Jeong, J., Abad, M. D., Hosemann, P., Oh, S. H. & Kiener, D., 2016, In : Acta materialia. 121, p. 104-116 13 p.

    Research output: Contribution to journalArticleResearchpeer-review

  100. Published

    Interface dominated mechanical, properties of ultra-fine grained and nanoporous Au at elevated temperatures

    Leitner, A., Maier-Kiener, V., Jeong, J., Abad, M. D., Hosemann, P., Oh, S. H. & Kiener, D., Dec 2016, In : Acta materialia. 121, p. 104-116

    Research output: Contribution to journalArticleResearchpeer-review

  101. Published

    Intergranular Films at Metal-Ceramic Interfaces: Part I – Interface, Structure & Chemistry

    Avishai, A., Scheu, C. & Kaplan, W. D., 2005, In : Acta materialia. 53, p. 1559-1569

    Research output: Contribution to journalArticleResearchpeer-review

Previous 1 2 Next