Materials science and engineering: A, Structural materials: properties, microstructure and processing, 0921-5093

Journal

ISSNs0921-5093
Additional searchable ISSN (Electronic)1873-4936

Research output

  1. Published

    Creep properties and creep microstructure evolution of Mg-2.49Nd-1.82Gd-0.19Zn-0.4Zr alloy

    Han, W., Yang, G., Xiao, L., LI, J. & Jie, W., 2017, In : Materials science and engineering: A, Structural materials: properties, microstructure and processing. 684, p. 90-100

    Research output: Contribution to journalArticleResearchpeer-review

  2. Published

    Microstructure, texture evolution and tensile properties of extruded Mg-4.58Zn-2.6Gd-0.16Zr alloy

    Xiao, L., Yang, G., Chen, J., Luo, S. F., Li, J. & Jie, W., 2019, In : Materials science and engineering: A, Structural materials: properties, microstructure and processing. 744.2019, January, p. 277-289 13 p.

    Research output: Contribution to journalArticleResearchpeer-review

  3. Published

    Yield strength prediction in Ni-base alloy 718Plus based on thermo-kinetic precipitation simulation

    Ahmadi, M. R., Povoden-Karadeniz, E., Whitmore, L., Stockinger, M., Falahati, A. & Kozeschnik, E., 1 Jul 2014, In : Materials Science and Engineering A. 608, p. 114-122 9 p.

    Research output: Contribution to journalArticleResearchpeer-review

  4. Published
  5. Published
  6. Published
  7. Published

    The effect of residual stresses and strain reversal on the fracture toughness of TiAl alloys

    Appel, F., Paul, J., Staron, P., Kolednik, O., Predan, J., Oehring, M. & Fischer, F-D., 2017, In : Materials science and engineering: A, Structural materials: properties, microstructure and processing. 709, p. 17-29

    Research output: Contribution to journalArticleResearchpeer-review

  8. Published

    Nanoindentation and wear properties of Ti and Ti-TiB composite materials produced by selective laser melting

    Attar, H., Ehtemam-Haghighi, S., Kent, D., Okulov, I. V., Wendrock, H., Bönisch, M., Volegov, A. S., Calin, M., Eckert, J. & Dargusch, M. S., Mar 2017, In : Materials science and engineering: A, Structural materials: properties, microstructure and processing. 688, p. 20-26

    Research output: Contribution to journalArticleResearchpeer-review

  9. Published
  10. Published
  11. Published

    Controlling the distribution of structural heterogeneities in severely deformed metallic glass

    Bian, X. L., Zhao, D., Kim, J. T., Sopu, D., Wang, G., Pippan, R. & Eckert, J., 2 Mar 2019, In : Materials Science and Engineering A. 752.2019, 3 April, p. 36-42 7 p.

    Research output: Contribution to journalArticleResearchpeer-review

  12. Published

    On the overaging behaviour of tool steel X38CrMoV5-3

    Bischof, M., Staron, P., Caliskanoglu, Z. D., Leitner, H., Scheu, C. & Clemens, H., 2008, In : Materials science and engineering: A, Structural materials: properties, microstructure and processing. 472, p. 148-152

    Research output: Contribution to journalArticleResearchpeer-review

  13. Published
  14. Published

    Characterisation of Residual Stresses in Turbine Discs by Neutron and High-Energy X-Ray Diffraction and Comparisation to Finite Element Modeling

    Cihak, U., Staron, P., Clemens, H., Homeyer, J., Stockinger, M. & Tockner, J., 2006, In : Materials science and engineering: A, Structural materials: properties, microstructure and processing. 437, p. 75-82

    Research output: Contribution to journalArticleResearchpeer-review

  15. E-pub ahead of print

    In-situ observations of the fracture and adhesion of Cu/Nb multilayers on polyimide substrates

    Cordill, M., Kleinbichler, A., Völker, B., Kraker, P., Economy, D. R., Többens, D. M., Kirchlechner, C. & Kennedy, M. S., 14 Aug 2018, In : Materials science and engineering: A, Structural materials: properties, microstructure and processing. 735.2018, 26 September, p. 456-462 7 p.

    Research output: Contribution to journalArticleResearchpeer-review

  16. Published
  17. Published
  18. Published

    Effect of mechanically induced structural rejuvenation on the deformation behaviour of CuZr based bulk metallic glass

    Ebner, C., Pauly, S., Eckert, J. & Rentenberger, C., 31 Jan 2020, In : Materials Science and Engineering A. 773, 138848.

    Research output: Contribution to journalArticleResearchpeer-review

  19. Published
  20. Published
  21. Published

    Significance of temperature increase in processing by high-pressure torsion

    Edalati, K., Miresmaeili, R., Horita, Z., Kanayama, H. & Pippan, R., 2011, In : Materials science and engineering: A, Structural materials: properties, microstructure and processing. p. 7301-7305

    Research output: Contribution to journalArticleResearchpeer-review

  22. Published

    Comparison of NiAl precipitation in a medium carbon secondary hardening steel and C-free PH13-8 maraging steel

    Erlach, S. D., Leitner, H., Bischof, M., Clemens, H., Danoix, F., Lemarchand, D. & Siller, I., 2006, In : Materials science and engineering: A, Structural materials: properties, microstructure and processing. 429, p. 96-106

    Research output: Contribution to journalArticleResearchpeer-review

  23. Published

    Influence of Ag and Co additions on glass-forming ability, thermal and mechanical properties of Cu–Zr–Al bulk metallic glasses

    Escher, B., Kühn, U., Eckert, J., Rentenberger, C. & Pauly, S., 15 Sep 2016, In : Materials science and engineering: A, Structural materials: properties, microstructure and processing. 673, p. 90-98 9 p.

    Research output: Contribution to journalArticleResearchpeer-review

  24. Published
  25. Published
  26. Published
  27. Published
  28. Published
  29. Published
  30. Published

    Mechanism of low temperature deformation in aluminium alloys

    Gruber, B., Weißensteiner, I., Kremmer, T., Grabner, F., Falkinger, G., Schökel, A., Spieckermann, F., Schäublin, R., Uggowitzer, P. & Pogatscher, S., 2 Aug 2020, In : Materials science and engineering: A, Structural materials: properties, microstructure and processing. 2020, 795, 11 p., 139935.

    Research output: Contribution to journalArticleResearchpeer-review

  31. Published

    Aluminum matrix composites reinforced with metallic glass particles with core-shell structure

    Guan, H. D., Li, C. J., Gao, P., Prashanth, K. G., Tan, J., Eckert, J., Tao, J. M. & Yi, J. H., 13 Jan 2020, In : Materials Science and Engineering A. 771, 138630.

    Research output: Contribution to journalArticleResearchpeer-review

  32. Published
  33. Published
  34. Published
  35. Published
  36. Published

    Anisotropic fracture behavior of ultrafine-grained iron

    Hohenwarter, A. & Pippan, R., 2010, In : Materials science and engineering: A, Structural materials: properties, microstructure and processing. 527, p. 2649-2656

    Research output: Contribution to journalArticleResearchpeer-review

  37. Published
  38. Published
  39. Published
  40. Published

    Effect of cerium addition on microstructure and mechanical properties of high-strength Fe85Cr4Mo8V2C1 cast steel

    Hufenbach, J., Helth, A., Lee, M. H., Wendrock, H., Giebeler, L., Choe, C. Y., Kim, K. H., Kühn, U., Kim, T. S. & Eckert, J., 30 Sep 2016, In : Materials science and engineering: A, Structural materials: properties, microstructure and processing. 674, p. 366-374 9 p.

    Research output: Contribution to journalArticleResearchpeer-review

  41. Published
  42. Published

    Influence of morphology and structural size on the fracture behavior of a nanostructured pearlitic steel

    Kammerhofer, C., Hohenwarter, A., Scheriau, S., Brantner, H. P. & Pippan, R., 2013, In : Materials science and engineering: A, Structural materials: properties, microstructure and processing. 585, p. 190-196

    Research output: Contribution to journalArticleResearchpeer-review

  43. Published
  44. Published
  45. Published
  46. Published

    Cooperative deformation behavior between the shear band and boundary sliding of an Al-based nanostructure-dendrite composite

    Kim, J. T., Hong, S. H., Kim, Y. S., Park, H. J., Maity, T., Chawake, N., Bian, X. L., Sarac, B., Park, J. M., Prashanth, K. G., Park, J. Y., Eckert, J. & Kim, K. B., 11 Aug 2018, In : Materials science and engineering: A, Structural materials: properties, microstructure and processing. 735.2018, 26 September, p. 81-88 8 p.

    Research output: Contribution to journalArticleResearchpeer-review

  47. Published

    Local and global measures of the fracture toughness of metal matrix composites

    Kolednik, O. & Sabirov, I., 2010, In : Materials science and engineering: A, Structural materials: properties, microstructure and processing. p. 3100-3110

    Research output: Contribution to journalArticleResearchpeer-review

  48. Published

    Modeling fatigue crack growth in a bimaterial specimen with the configurational forces concept

    Kolednik, O., Predan, J., Gubeljak, N. & Fischer, F. D., 2009, In : Materials science and engineering: A, Structural materials: properties, microstructure and processing. 519, p. 172-183

    Research output: Contribution to journalArticleResearchpeer-review

  49. Published

    Shape Factors in Modeling of Precipitation

    Kozeschnik, E., Svoboda, J. & Fischer, F. D., 2006, In : Materials science and engineering: A, Structural materials: properties, microstructure and processing. 441, p. 68-72

    Research output: Contribution to journalArticleResearchpeer-review

  50. Published

    Discrete dislocation simulation of nanoindentation: The effect of statistically distributed dislocations

    Kreuzer, H. G. M. & Pippan, R., 2005, In : Materials science and engineering: A, Structural materials: properties, microstructure and processing. 400-401, p. 460-462

    Research output: Contribution to journalArticleResearchpeer-review

  51. Published

    Discrete dislocation simulation of nanoindentation: the effect of moving conditions and indenter shape

    Kreuzer, H. G. M. & Pippan, R., 2004, In : Materials science and engineering: A, Structural materials: properties, microstructure and processing. 387-389, p. 254-256

    Research output: Contribution to journalArticleResearchpeer-review

  52. Published

    Solute clustering and precipitation in an Al-Cu-Mg-Ag-Si model alloy

    LI, J., An, Z. H., Hage, F. S., Wang, H. Y., Xie, P., Jin, S. B., Ramasse, Q. & Sha, G., 2019, In : Materials science and engineering: A, Structural materials: properties, microstructure and processing. 760, p. 366-376

    Research output: Contribution to journalArticleResearchpeer-review

  53. Published

    Solute clustering and precipitation in an Al–Cu–Mg–Ag–Si model alloy

    LI, J., An, Z., Hage, F. S., Wang, H., Xie, P., Jin, S., Ramasse, Q. M. & Sha, G., 8 Jul 2019, In : Materials science and engineering: A, Structural materials: properties, microstructure and processing. 760.2019, July, p. 366-376 11 p.

    Research output: Contribution to journalArticleResearchpeer-review

  54. Published

    Analysis of the Precipitation Behaviour in a High Speed Steel with Small Angle Neutron Scattering

    Leitner, H., Staron, P., Clemens, H., Marsoner, S. & Warbichler, P., 2005, In : Materials science and engineering: A, Structural materials: properties, microstructure and processing. 398, p. 323-331

    Research output: Contribution to journalArticleResearchpeer-review

  55. Published
  56. Published

    Revisiting fatigue crack growth in various grain size regimes of Ni

    Leitner, T., Hohenwarter, A. & Pippan, R., 14 Oct 2015, In : Materials science and engineering: A, Structural materials: properties, microstructure and processing. 646, p. 294-305 12 p., 32705.

    Research output: Contribution to journalArticleResearchpeer-review

  57. E-pub ahead of print
  58. Published
  59. Published

    Designed heterogeneities improve the fracture reliability of a Zr-based bulk metallic glass

    Li, B. S., Shakur Shahabi, H., Scudino, S., Eckert, J. & Kruzic, J. J., 14 Oct 2015, In : Materials science and engineering: A, Structural materials: properties, microstructure and processing. 646, p. 242-248 7 p.

    Research output: Contribution to journalArticleResearchpeer-review

  60. Published

    Microstructure and strength of nano-/ultrafine-grained carbon nanotube-reinforced titanium composites processed by high-pressure torsion

    Li, F. X., Hao, P. D., Yi, J. H., Chen, Z., Prashanth, K. G., Maity, T. & Eckert, J., 11 Apr 2018, In : Materials science and engineering: A, Structural materials: properties, microstructure and processing. 722, p. 122-128 7 p.

    Research output: Contribution to journalArticleResearchpeer-review

  61. Published
  62. Published

    Hardening and microstructure reactions in high-temperature Equal-Channel Angular Pressed Mg-Nd-Gd-Zn-Zr alloy

    Li, J., Sha, G., Xu, W., Xia, K., Jie, W. & Simon, R., 2010, In : Materials science and engineering: A, Structural materials: properties, microstructure and processing. 527, p. 5092-5099

    Research output: Contribution to journalArticleResearchpeer-review

  63. Published

    Precipitation microstructure and age-hardening response of an Mg-Gd-Nd-Zn-Zr alloy

    Li, J., Sha, G., Wang, T., Jie, W. & Ringer, S., 2012, In : Materials science and engineering: A, Structural materials: properties, microstructure and processing. 534, p. 1-6

    Research output: Contribution to journalArticleResearchpeer-review

  64. Published

    Reduced brittleness of multi-walled carbon nanotubes (MWCNTs) containing Al2O3-C refractories with boron carbide

    Liao, N., Li, Y., Jin, S., Sang, S. & Liu, G., 20 Jun 2017, In : Materials science and engineering: A, Structural materials: properties, microstructure and processing. 698, p. 80-87 8 p.

    Research output: Contribution to journalArticleResearchpeer-review

  65. Published
  66. Published
  67. Published
  68. Published
  69. Published
  70. Published
  71. Published
  72. Published
  73. Published
  74. Published
  75. Published

    Solid-Liquid Interfacial Free Energy

    Ludwig, A., 1991, In : Materials science and engineering: A, Structural materials: properties, microstructure and processing. p. 577-580

    Research output: Contribution to journalArticleResearchpeer-review

  76. Published

    Microstructures and mechanical properties of Al2O3-C refractories with addition of multi-walled carbon nanotubes

    Luo, M., Li, Y., Jin, S., Sang, S., Zhao, L. & Li, Y., 30 Jun 2012, In : Materials science and engineering: A, Structural materials: properties, microstructure and processing. 548, p. 134-141

    Research output: Contribution to journalArticleResearchpeer-review

  77. Published

    In situ formation of carbon nanotubes and ceramic whiskers in Al2O3-C refractories with addition of Ni-catalyzed phenolic resin

    Luo, M., Li, Y., Sang, S., Zhao, L., Jin, S. & Li, Y., 15 Dec 2012, In : Materials science and engineering: A, Structural materials: properties, microstructure and processing. 558, p. 533-542

    Research output: Contribution to journalArticleResearchpeer-review

  78. Published

    Microstructure Evolution and Mechanical Properties of directionally solidified Mg-xGd (x¼0.8, 1.5,and2.5)alloys

    Luo, S., Yang, G., Liu, S., Wang, J., Li, J. & Jie, W., 2016, In : Materials science and engineering: A, Structural materials: properties, microstructure and processing. 662, p. 241-250 10 p.

    Research output: Contribution to journalArticleResearchpeer-review

  79. Published
  80. Published
  81. Published
  82. Published
  83. Published

    Evolution of misorientation distribution during warm 'abc' forging of commercial-purity titanium

    Mironov, S. Y., Salishchev, G. A., Myshlyaev, M. M. & Pippan, R., 2006, In : Materials science and engineering: A, Structural materials: properties, microstructure and processing. 418, p. 257-267

    Research output: Contribution to journalArticleResearchpeer-review

  84. Published

    Assessment of dynamic softening mechanisms in Allvac® 718Plus™ by EBSD analysis

    Mitsche, S., Sommitsch, C., Huber, D., Stockinger, M. & Poelt, P., 25 Apr 2011, In : Materials Science and Engineering A. 528, 10-11, p. 3754-3760 7 p.

    Research output: Contribution to journalArticleResearchpeer-review

  85. Published

    Back stress evolution and iso-volume fraction lines in a Cr-Ni-Mo-Al-Ti maraging steel in the process of martensitic transformation

    Nagayama, K., Terasaki, T., Goto, S., Tanaka, K., Antretter, T., Fischer, F. D., Cailletaud, G. & Azzouz, F., 25 Oct 2002, In : Materials science and engineering: A, Structural materials: properties, microstructure and processing. 336, 1-2, p. 30-38 9 p.

    Research output: Contribution to journalArticleResearchpeer-review

  86. Published

    Mechanical properties of a Cr-Ni-Mo-Al-Ti maraging steel in the process of martensitic transformation

    Nagayama, K., Terasaki, T., Tanaka, K., Fischer, F. D., Antretter, T., Cailletaud, G. & Azzouz, F., 30 Jun 2001, In : Materials science and engineering: A, Structural materials: properties, microstructure and processing. 308, 1-2, p. 25-37 13 p.

    Research output: Contribution to journalArticleResearchpeer-review

  87. Published
  88. Published

    Phase formation, microstructure and deformation behavior of heavily alloyed TiNb- and TiV-based titanium alloys

    Okulov, I. V., Bönisch, M., Okulov, A. V., Volegov, A. S., Attar, H., Ehtemam-Haghighi, S., Calin, M., Wang, Z., Hohenwarter, A., Kaban, I., Prashanth, K. G. & Eckert, J., 22 Aug 2018, In : Materials science and engineering: A, Structural materials: properties, microstructure and processing. 733, p. 80-86 7 p.

    Research output: Contribution to journalArticleResearchpeer-review

  89. Published

    Micro-to-nano-scale deformation mechanism of a Ti-based dendritic-ultrafine eutectic alloy exhibiting large tensile ductility

    Okulov, I. V., Bönisch, M., Volegov, A. S., Shahabi, H. S., Wendrock, H., Gemming, T. & Eckert, J., 13 Jan 2017, In : Materials science and engineering: A, Structural materials: properties, microstructure and processing. 682, p. 673-678 6 p.

    Research output: Contribution to journalArticleResearchpeer-review

  90. Published
  91. Published
  92. Published

    Dynamic recrystallization of NI-base alloys-Experimental results and comparisons with simulations

    Poelt, P., Sommitsch, C., Mitsche, S. & Walter, M., 2006, In : Materials science and engineering: A, Structural materials: properties, microstructure and processing. p. 306-314

    Research output: Contribution to journalArticleResearchpeer-review

  93. E-pub ahead of print

    Friction welding of selective laser melted Ti6Al4V parts

    Prashanth, K. G., Damodaram, R., Maity, T., Wang, P. & Eckert, J., 3 Aug 2017, In : Materials science and engineering: A, Structural materials: properties, microstructure and processing. 704.2017, September, p. 66-71 6 p.

    Research output: Contribution to journalArticleResearchpeer-review

  94. Published

    Influence of the heating rate on the recrystallization behavior of molybdenum

    Primig, S., Leitner, H., Knabl, W., Lorich, A., Clemens, H. & Stickler, R., 2012, In : Materials science and engineering: A, Structural materials: properties, microstructure and processing. 535, p. 316-324

    Research output: Contribution to journalArticleResearchpeer-review

  95. Published
  96. Published
  97. Published
  98. Published

    Precipitation processes in a Mg–Zn–Sn alloy studied by TEM and SAXS

    Rashkova, B., Prantl, W., Görgl, R., Keckes, J., Cohen, S., Bamberger, M. & Dehm, G., 2008, In : Materials science and engineering: A, Structural materials: properties, microstructure and processing. A494, p. 158-164

    Research output: Contribution to journalArticleResearchpeer-review

  99. Published
  100. Published

    Annealing studies of nanocomposite Ti-Si-C thin films with respect to phase stability and tribological performance

    Rester, M., Neidhardt, J., Eklund, P., Emmerlich, J., Ljungcrantz, H., Hultman, L. & Mitterer, C., 2006, In : Materials science and engineering: A, Structural materials: properties, microstructure and processing. 429, p. 90-95

    Research output: Contribution to journalArticleResearchpeer-review

Previous 1 2 Next