Materials science and engineering: A, Structural materials: properties, microstructure and processing, 0921-5093

Journal

ISSNs0921-5093
Additional searchable ISSN (Electronic)1873-4936

Research output

  1. 2020
  2. Published
  3. Published

    Effect of tempering and deep cryogenic treatment on microstructure and mechanical properties of Cr–Mo–V–Ni steel

    Yan, Z., Liu, K. & Eckert, J., 10 Jun 2020, In : Materials Science and Engineering A. 787, 139520.

    Research output: Contribution to journalArticleResearchpeer-review

  4. Published

    Transformation-enhanced strength and ductility in a FeCoCrNiMn dual phase high-entropy alloy

    Zhang, T., Zhao, R. D., Wu, F. F., Lin, S. B., Jiang, S. S., Huang, Y. J., Chen, S. H. & Eckert, J., 7 Apr 2020, In : Materials Science and Engineering A. 780, 139182.

    Research output: Contribution to journalArticleResearchpeer-review

  5. Published

    Effect of mechanically induced structural rejuvenation on the deformation behaviour of CuZr based bulk metallic glass

    Ebner, C., Pauly, S., Eckert, J. & Rentenberger, C., 31 Jan 2020, In : Materials Science and Engineering A. 773, 138848.

    Research output: Contribution to journalArticleResearchpeer-review

  6. Published

    Aluminum matrix composites reinforced with metallic glass particles with core-shell structure

    Guan, H. D., Li, C. J., Gao, P., Prashanth, K. G., Tan, J., Eckert, J., Tao, J. M. & Yi, J. H., 13 Jan 2020, In : Materials Science and Engineering A. 771, 138630.

    Research output: Contribution to journalArticleResearchpeer-review

  7. Published

    Strain aging characterization and physical modelling of over-aging in dual phase steel

    Soliman, M., Shan, Y. V., Mendez Martin, F., Kozeschnik, E. & Palkowski, H., 2020, In : Materials science and engineering: A, Structural materials: properties, microstructure and processing. 2020, p. 1-29

    Research output: Contribution to journalArticleResearchpeer-review

  8. 2019
  9. Published

    Solute clustering and precipitation in an Al–Cu–Mg–Ag–Si model alloy

    LI, J., An, Z., Hage, F. S., Wang, H., Xie, P., Jin, S., Ramasse, Q. M. & Sha, G., 8 Jul 2019, In : Materials science and engineering: A, Structural materials: properties, microstructure and processing. 760.2019, July, p. 366-376 11 p.

    Research output: Contribution to journalArticleResearchpeer-review

  10. Published
  11. Published

    Controlling the distribution of structural heterogeneities in severely deformed metallic glass

    Bian, X. L., Zhao, D., Kim, J. T., Sopu, D., Wang, G., Pippan, R. & Eckert, J., 2 Mar 2019, In : Materials Science and Engineering A. 752.2019, 3 April, p. 36-42 7 p.

    Research output: Contribution to journalArticleResearchpeer-review

  12. Published
  13. Published
  14. Published

    Tailoring bimodal grain size structures in nanocrystalline compositionally complex alloys to improve ductility

    Schuh, B., Pippan, R. & Hohenwarter, A., 25 Jan 2019, In : Materials Science and Engineering A. 748.2019, 4 March, p. 379-385 7 p.

    Research output: Contribution to journalArticleResearchpeer-review

  15. Published

    Microstructure, texture evolution and tensile properties of extruded Mg-4.58Zn-2.6Gd-0.16Zr alloy

    Xiao, L., Yang, G., Chen, J., Luo, S. F., Li, J. & Jie, W., 2019, In : Materials science and engineering: A, Structural materials: properties, microstructure and processing. 744.2019, January, p. 277-289 13 p.

    Research output: Contribution to journalArticleResearchpeer-review

  16. Published
  17. Published

    Solute clustering and precipitation in an Al-Cu-Mg-Ag-Si model alloy

    LI, J., An, Z. H., Hage, F. S., Wang, H. Y., Xie, P., Jin, S. B., Ramasse, Q. & Sha, G., 2019, In : Materials science and engineering: A, Structural materials: properties, microstructure and processing. 760, p. 366-376

    Research output: Contribution to journalArticleResearchpeer-review

  18. 2018
  19. Published

    Phase formation, microstructure and deformation behavior of heavily alloyed TiNb- and TiV-based titanium alloys

    Okulov, I. V., Bönisch, M., Okulov, A. V., Volegov, A. S., Attar, H., Ehtemam-Haghighi, S., Calin, M., Wang, Z., Hohenwarter, A., Kaban, I., Prashanth, K. G. & Eckert, J., 22 Aug 2018, In : Materials science and engineering: A, Structural materials: properties, microstructure and processing. 733, p. 80-86 7 p.

    Research output: Contribution to journalArticleResearchpeer-review

  20. E-pub ahead of print

    In-situ observations of the fracture and adhesion of Cu/Nb multilayers on polyimide substrates

    Cordill, M., Kleinbichler, A., Völker, B., Kraker, P., Economy, D. R., Többens, D. M., Kirchlechner, C. & Kennedy, M. S., 14 Aug 2018, In : Materials science and engineering: A, Structural materials: properties, microstructure and processing. 735.2018, 26 September, p. 456-462 7 p.

    Research output: Contribution to journalArticleResearchpeer-review

  21. Published

    Cooperative deformation behavior between the shear band and boundary sliding of an Al-based nanostructure-dendrite composite

    Kim, J. T., Hong, S. H., Kim, Y. S., Park, H. J., Maity, T., Chawake, N., Bian, X. L., Sarac, B., Park, J. M., Prashanth, K. G., Park, J. Y., Eckert, J. & Kim, K. B., 11 Aug 2018, In : Materials science and engineering: A, Structural materials: properties, microstructure and processing. 735.2018, 26 September, p. 81-88 8 p.

    Research output: Contribution to journalArticleResearchpeer-review

  22. Published

    Microstructure and strength of nano-/ultrafine-grained carbon nanotube-reinforced titanium composites processed by high-pressure torsion

    Li, F. X., Hao, P. D., Yi, J. H., Chen, Z., Prashanth, K. G., Maity, T. & Eckert, J., 11 Apr 2018, In : Materials science and engineering: A, Structural materials: properties, microstructure and processing. 722, p. 122-128 7 p.

    Research output: Contribution to journalArticleResearchpeer-review

  23. Published

    Microstructure and mechanical properties of a heat-treatable Al-3.5Cu-1.5Mg-1Si alloy produced by selective laser melting

    Wang, P., Gammer, C., Brenne, F., Prashanth, K. G., Mendes, R. G., Rümmeli, M. H., Gemming, T., Eckert, J. & Scudino, S., 10 Jan 2018, In : Materials science and engineering: A, Structural materials: properties, microstructure and processing. 711.2018, January, p. 562-570 9 p.

    Research output: Contribution to journalArticleResearchpeer-review

  24. Published

    Enhanced mechanical properties of Al2O3-C refractories with silicon hybridized expanded graphite

    Wang, Q., Li, Y., Jin, S., Sang, S., Xu, Y., Xu, X. & Wang, G., 2 Jan 2018, In : Materials science and engineering: A, Structural materials: properties, microstructure and processing. 709, p. 160-171 12 p.

    Research output: Contribution to journalArticleResearchpeer-review

  25. Published
  26. Published

    Microstructure and mechanical properties of foundry Al-Si-Cu-Hf alloy

    Xing, Y., Jia, Z., LI, J., Ding, L., Huang, H. & Liu, Q., 2018, In : Materials science and engineering: A, Structural materials: properties, microstructure and processing. 722.2018, April, p. 197-205 9 p.

    Research output: Contribution to journalArticleResearchpeer-review

  27. Published

    Precipitate strengthening and thermal stability in three component metallic nanolaminate thin films

    Schoeppner, R., Taylor, A. A., Cordill, M., Zbib, H. M., Michler, J. & Bahr, D. F., 2018, In : Materials science and engineering: A, Structural materials: properties, microstructure and processing. 712, p. 485-492

    Research output: Contribution to journalArticleResearchpeer-review

  28. 2017
  29. Published

    Corrigendum to “Structural modifications in sub-Tg annealed CuZr-based metallic glass”

    Sarac, B., Bernasconi, A., Wright, J., Stoica, M., Spieckermann, F., Mühlbacher, M., Keckes, J., Bian, X. L., Wang, G. & Eckert, J., Dec 2017, In : Materials science and engineering: A, Structural materials: properties, microstructure and processing.

    Research output: Contribution to journalArticleResearchpeer-review

  30. Published
  31. Published

    Structural modifications in sub-Tg annealed CuZr-based metallic glass

    Sarac, B., Bernasconi, A., Wright, J., Stoica, M., Spieckermann, F., Mühlbacher, M., Keckes, J., Bian, X., Wang, G. & Eckert, J., 7 Nov 2017, In : Materials science and engineering: A, Structural materials: properties, microstructure and processing. 707, p. 245-252 8 p.

    Research output: Contribution to journalArticleResearchpeer-review

  32. E-pub ahead of print
  33. Published
  34. E-pub ahead of print

    Friction welding of selective laser melted Ti6Al4V parts

    Prashanth, K. G., Damodaram, R., Maity, T., Wang, P. & Eckert, J., 3 Aug 2017, In : Materials science and engineering: A, Structural materials: properties, microstructure and processing. 704.2017, September, p. 66-71 6 p.

    Research output: Contribution to journalArticleResearchpeer-review

  35. Published

    Reduced brittleness of multi-walled carbon nanotubes (MWCNTs) containing Al2O3-C refractories with boron carbide

    Liao, N., Li, Y., Jin, S., Sang, S. & Liu, G., 20 Jun 2017, In : Materials science and engineering: A, Structural materials: properties, microstructure and processing. 698, p. 80-87 8 p.

    Research output: Contribution to journalArticleResearchpeer-review

  36. Published

    Nanoindentation and wear properties of Ti and Ti-TiB composite materials produced by selective laser melting

    Attar, H., Ehtemam-Haghighi, S., Kent, D., Okulov, I. V., Wendrock, H., Bönisch, M., Volegov, A. S., Calin, M., Eckert, J. & Dargusch, M. S., Mar 2017, In : Materials science and engineering: A, Structural materials: properties, microstructure and processing. 688, p. 20-26

    Research output: Contribution to journalArticleResearchpeer-review

  37. Published
  38. Published

    Micro-to-nano-scale deformation mechanism of a Ti-based dendritic-ultrafine eutectic alloy exhibiting large tensile ductility

    Okulov, I. V., Bönisch, M., Volegov, A. S., Shahabi, H. S., Wendrock, H., Gemming, T. & Eckert, J., 13 Jan 2017, In : Materials science and engineering: A, Structural materials: properties, microstructure and processing. 682, p. 673-678 6 p.

    Research output: Contribution to journalArticleResearchpeer-review

  39. Published

    Compressed Bi-crystal Micropillars Showing a Sigmoidal Deformation State - A Computational Study

    Toth, F., Kirchlechner, C., Fischer, F. D., Dehm, G. & Rammerstorfer, F. G., 2017, In : Materials science and engineering: A, Structural materials: properties, microstructure and processing. 700, p. 168-174

    Research output: Contribution to journalArticleResearchpeer-review

  40. Published

    Creep properties and creep microstructure evolution of Mg-2.49Nd-1.82Gd-0.19Zn-0.4Zr alloy

    Han, W., Yang, G., Xiao, L., LI, J. & Jie, W., 2017, In : Materials science and engineering: A, Structural materials: properties, microstructure and processing. 684, p. 90-100

    Research output: Contribution to journalArticleResearchpeer-review

  41. Published
  42. Published

    Microstructure and mechanical properties of foundry Al-Si-Cu-Hf alloy

    Xing, Y., Jia, Z., LI, J., Ding, L., Huang, H. & Liu, Q., 2017, In : Materials Science and Engineering A. 684, p. 90-100

    Research output: Contribution to journalArticleResearchpeer-review

  43. Published

    The effect of residual stresses and strain reversal on the fracture toughness of TiAl alloys

    Appel, F., Paul, J., Staron, P., Kolednik, O., Predan, J., Oehring, M. & Fischer, F-D., 2017, In : Materials science and engineering: A, Structural materials: properties, microstructure and processing. 709, p. 17-29

    Research output: Contribution to journalArticleResearchpeer-review

  44. 2016
  45. Published
  46. Published

    Effect of cerium addition on microstructure and mechanical properties of high-strength Fe85Cr4Mo8V2C1 cast steel

    Hufenbach, J., Helth, A., Lee, M. H., Wendrock, H., Giebeler, L., Choe, C. Y., Kim, K. H., Kühn, U., Kim, T. S. & Eckert, J., 30 Sep 2016, In : Materials science and engineering: A, Structural materials: properties, microstructure and processing. 674, p. 366-374 9 p.

    Research output: Contribution to journalArticleResearchpeer-review

  47. Published
  48. Published

    Influence of Ag and Co additions on glass-forming ability, thermal and mechanical properties of Cu–Zr–Al bulk metallic glasses

    Escher, B., Kühn, U., Eckert, J., Rentenberger, C. & Pauly, S., 15 Sep 2016, In : Materials science and engineering: A, Structural materials: properties, microstructure and processing. 673, p. 90-98 9 p.

    Research output: Contribution to journalArticleResearchpeer-review

  49. Published

    Laser surface remelting of a Cu-Al-Ni-Mn shape memory alloy

    da Silva, M. R., Gargarella, P., Gustmann, T., Botta Filho, W. J., Kiminami, C. S., Eckert, J., Pauly, S. & Bolfarini, C., 20 Apr 2016, In : Materials science and engineering: A, Structural materials: properties, microstructure and processing. 661, p. 61-67 7 p.

    Research output: Contribution to journalArticleResearchpeer-review

  50. Published
  51. Published

    Impact of the B2 ordering behavior on the mechanical properties of a Fe Co Mo alloy

    Turk, C., Leitner, H., Kellezi, G., Clemens, H., Gan, W., Staron, P. & Primig, S., 2016, In : Materials science and engineering: A, Structural materials: properties, microstructure and processing. 662, p. 511-518 8 p., 662.

    Research output: Contribution to journalArticleResearchpeer-review

  52. Published
  53. Published

    Microstructure Evolution and Mechanical Properties of directionally solidified Mg-xGd (x¼0.8, 1.5,and2.5)alloys

    Luo, S., Yang, G., Liu, S., Wang, J., Li, J. & Jie, W., 2016, In : Materials science and engineering: A, Structural materials: properties, microstructure and processing. 662, p. 241-250 10 p.

    Research output: Contribution to journalArticleResearchpeer-review

  54. Published
  55. Published
Previous 1 2 3 Next