Materials science and engineering: A, Structural materials: properties, microstructure and processing, 0921-5093

Journal

ISSNs0921-5093
Additional searchable ISSN (Electronic)1873-4936

Research output

  1. 2020
  2. Published
  3. Published

    Effect of tempering and deep cryogenic treatment on microstructure and mechanical properties of Cr–Mo–V–Ni steel

    Yan, Z., Liu, K. & Eckert, J., 10 Jun 2020, In : Materials Science and Engineering A. 787, 139520.

    Research output: Contribution to journalArticleResearchpeer-review

  4. Published

    Transformation-enhanced strength and ductility in a FeCoCrNiMn dual phase high-entropy alloy

    Zhang, T., Zhao, R. D., Wu, F. F., Lin, S. B., Jiang, S. S., Huang, Y. J., Chen, S. H. & Eckert, J., 7 Apr 2020, In : Materials Science and Engineering A. 780, 139182.

    Research output: Contribution to journalArticleResearchpeer-review

  5. Published

    Effect of mechanically induced structural rejuvenation on the deformation behaviour of CuZr based bulk metallic glass

    Ebner, C., Pauly, S., Eckert, J. & Rentenberger, C., 31 Jan 2020, In : Materials Science and Engineering A. 773, 138848.

    Research output: Contribution to journalArticleResearchpeer-review

  6. Published

    Aluminum matrix composites reinforced with metallic glass particles with core-shell structure

    Guan, H. D., Li, C. J., Gao, P., Prashanth, K. G., Tan, J., Eckert, J., Tao, J. M. & Yi, J. H., 13 Jan 2020, In : Materials Science and Engineering A. 771, 138630.

    Research output: Contribution to journalArticleResearchpeer-review

  7. Published

    Strain aging characterization and physical modelling of over-aging in dual phase steel

    Soliman, M., Shan, Y. V., Mendez Martin, F., Kozeschnik, E. & Palkowski, H., 2020, In : Materials science and engineering: A, Structural materials: properties, microstructure and processing. 2020, p. 1-29

    Research output: Contribution to journalArticleResearchpeer-review

  8. 2019
  9. Published

    Solute clustering and precipitation in an Al–Cu–Mg–Ag–Si model alloy

    LI, J., An, Z., Hage, F. S., Wang, H., Xie, P., Jin, S., Ramasse, Q. M. & Sha, G., 8 Jul 2019, In : Materials science and engineering: A, Structural materials: properties, microstructure and processing. 760.2019, July, p. 366-376 11 p.

    Research output: Contribution to journalArticleResearchpeer-review

  10. Published
  11. Published

    Controlling the distribution of structural heterogeneities in severely deformed metallic glass

    Bian, X. L., Zhao, D., Kim, J. T., Sopu, D., Wang, G., Pippan, R. & Eckert, J., 2 Mar 2019, In : Materials Science and Engineering A. 752.2019, 3 April, p. 36-42 7 p.

    Research output: Contribution to journalArticleResearchpeer-review

  12. Published
  13. Published
  14. Published

    Tailoring bimodal grain size structures in nanocrystalline compositionally complex alloys to improve ductility

    Schuh, B., Pippan, R. & Hohenwarter, A., 25 Jan 2019, In : Materials Science and Engineering A. 748.2019, 4 March, p. 379-385 7 p.

    Research output: Contribution to journalArticleResearchpeer-review

  15. Published

    Microstructure, texture evolution and tensile properties of extruded Mg-4.58Zn-2.6Gd-0.16Zr alloy

    Xiao, L., Yang, G., Chen, J., Luo, S. F., Li, J. & Jie, W., 2019, In : Materials science and engineering: A, Structural materials: properties, microstructure and processing. 744.2019, January, p. 277-289 13 p.

    Research output: Contribution to journalArticleResearchpeer-review

  16. Published
  17. Published

    Solute clustering and precipitation in an Al-Cu-Mg-Ag-Si model alloy

    LI, J., An, Z. H., Hage, F. S., Wang, H. Y., Xie, P., Jin, S. B., Ramasse, Q. & Sha, G., 2019, In : Materials science and engineering: A, Structural materials: properties, microstructure and processing. 760, p. 366-376

    Research output: Contribution to journalArticleResearchpeer-review

  18. 2018
  19. Published

    Phase formation, microstructure and deformation behavior of heavily alloyed TiNb- and TiV-based titanium alloys

    Okulov, I. V., Bönisch, M., Okulov, A. V., Volegov, A. S., Attar, H., Ehtemam-Haghighi, S., Calin, M., Wang, Z., Hohenwarter, A., Kaban, I., Prashanth, K. G. & Eckert, J., 22 Aug 2018, In : Materials science and engineering: A, Structural materials: properties, microstructure and processing. 733, p. 80-86 7 p.

    Research output: Contribution to journalArticleResearchpeer-review

  20. E-pub ahead of print

    In-situ observations of the fracture and adhesion of Cu/Nb multilayers on polyimide substrates

    Cordill, M., Kleinbichler, A., Völker, B., Kraker, P., Economy, D. R., Többens, D. M., Kirchlechner, C. & Kennedy, M. S., 14 Aug 2018, In : Materials science and engineering: A, Structural materials: properties, microstructure and processing. 735.2018, 26 September, p. 456-462 7 p.

    Research output: Contribution to journalArticleResearchpeer-review

  21. Published

    Cooperative deformation behavior between the shear band and boundary sliding of an Al-based nanostructure-dendrite composite

    Kim, J. T., Hong, S. H., Kim, Y. S., Park, H. J., Maity, T., Chawake, N., Bian, X. L., Sarac, B., Park, J. M., Prashanth, K. G., Park, J. Y., Eckert, J. & Kim, K. B., 11 Aug 2018, In : Materials science and engineering: A, Structural materials: properties, microstructure and processing. 735.2018, 26 September, p. 81-88 8 p.

    Research output: Contribution to journalArticleResearchpeer-review

  22. Published

    Microstructure and strength of nano-/ultrafine-grained carbon nanotube-reinforced titanium composites processed by high-pressure torsion

    Li, F. X., Hao, P. D., Yi, J. H., Chen, Z., Prashanth, K. G., Maity, T. & Eckert, J., 11 Apr 2018, In : Materials science and engineering: A, Structural materials: properties, microstructure and processing. 722, p. 122-128 7 p.

    Research output: Contribution to journalArticleResearchpeer-review

  23. Published

    Microstructure and mechanical properties of a heat-treatable Al-3.5Cu-1.5Mg-1Si alloy produced by selective laser melting

    Wang, P., Gammer, C., Brenne, F., Prashanth, K. G., Mendes, R. G., Rümmeli, M. H., Gemming, T., Eckert, J. & Scudino, S., 10 Jan 2018, In : Materials science and engineering: A, Structural materials: properties, microstructure and processing. 711.2018, January, p. 562-570 9 p.

    Research output: Contribution to journalArticleResearchpeer-review

  24. Published

    Enhanced mechanical properties of Al2O3-C refractories with silicon hybridized expanded graphite

    Wang, Q., Li, Y., Jin, S., Sang, S., Xu, Y., Xu, X. & Wang, G., 2 Jan 2018, In : Materials science and engineering: A, Structural materials: properties, microstructure and processing. 709, p. 160-171 12 p.

    Research output: Contribution to journalArticleResearchpeer-review

  25. Published
  26. Published

    Microstructure and mechanical properties of foundry Al-Si-Cu-Hf alloy

    Xing, Y., Jia, Z., LI, J., Ding, L., Huang, H. & Liu, Q., 2018, In : Materials science and engineering: A, Structural materials: properties, microstructure and processing. 722.2018, April, p. 197-205 9 p.

    Research output: Contribution to journalArticleResearchpeer-review

  27. Published

    Precipitate strengthening and thermal stability in three component metallic nanolaminate thin films

    Schoeppner, R., Taylor, A. A., Cordill, M., Zbib, H. M., Michler, J. & Bahr, D. F., 2018, In : Materials science and engineering: A, Structural materials: properties, microstructure and processing. 712, p. 485-492

    Research output: Contribution to journalArticleResearchpeer-review

  28. 2017
  29. Published

    Corrigendum to “Structural modifications in sub-Tg annealed CuZr-based metallic glass”

    Sarac, B., Bernasconi, A., Wright, J., Stoica, M., Spieckermann, F., Mühlbacher, M., Keckes, J., Bian, X. L., Wang, G. & Eckert, J., Dec 2017, In : Materials science and engineering: A, Structural materials: properties, microstructure and processing.

    Research output: Contribution to journalArticleResearchpeer-review

  30. Published
  31. Published

    Structural modifications in sub-Tg annealed CuZr-based metallic glass

    Sarac, B., Bernasconi, A., Wright, J., Stoica, M., Spieckermann, F., Mühlbacher, M., Keckes, J., Bian, X., Wang, G. & Eckert, J., 7 Nov 2017, In : Materials science and engineering: A, Structural materials: properties, microstructure and processing. 707, p. 245-252 8 p.

    Research output: Contribution to journalArticleResearchpeer-review

  32. E-pub ahead of print
  33. Published
  34. E-pub ahead of print

    Friction welding of selective laser melted Ti6Al4V parts

    Prashanth, K. G., Damodaram, R., Maity, T., Wang, P. & Eckert, J., 3 Aug 2017, In : Materials science and engineering: A, Structural materials: properties, microstructure and processing. 704.2017, September, p. 66-71 6 p.

    Research output: Contribution to journalArticleResearchpeer-review

  35. Published

    Reduced brittleness of multi-walled carbon nanotubes (MWCNTs) containing Al2O3-C refractories with boron carbide

    Liao, N., Li, Y., Jin, S., Sang, S. & Liu, G., 20 Jun 2017, In : Materials science and engineering: A, Structural materials: properties, microstructure and processing. 698, p. 80-87 8 p.

    Research output: Contribution to journalArticleResearchpeer-review

  36. Published

    Nanoindentation and wear properties of Ti and Ti-TiB composite materials produced by selective laser melting

    Attar, H., Ehtemam-Haghighi, S., Kent, D., Okulov, I. V., Wendrock, H., Bönisch, M., Volegov, A. S., Calin, M., Eckert, J. & Dargusch, M. S., Mar 2017, In : Materials science and engineering: A, Structural materials: properties, microstructure and processing. 688, p. 20-26

    Research output: Contribution to journalArticleResearchpeer-review

  37. Published
  38. Published

    Micro-to-nano-scale deformation mechanism of a Ti-based dendritic-ultrafine eutectic alloy exhibiting large tensile ductility

    Okulov, I. V., Bönisch, M., Volegov, A. S., Shahabi, H. S., Wendrock, H., Gemming, T. & Eckert, J., 13 Jan 2017, In : Materials science and engineering: A, Structural materials: properties, microstructure and processing. 682, p. 673-678 6 p.

    Research output: Contribution to journalArticleResearchpeer-review

  39. Published

    Compressed Bi-crystal Micropillars Showing a Sigmoidal Deformation State - A Computational Study

    Toth, F., Kirchlechner, C., Fischer, F. D., Dehm, G. & Rammerstorfer, F. G., 2017, In : Materials science and engineering: A, Structural materials: properties, microstructure and processing. 700, p. 168-174

    Research output: Contribution to journalArticleResearchpeer-review

  40. Published

    Creep properties and creep microstructure evolution of Mg-2.49Nd-1.82Gd-0.19Zn-0.4Zr alloy

    Han, W., Yang, G., Xiao, L., LI, J. & Jie, W., 2017, In : Materials science and engineering: A, Structural materials: properties, microstructure and processing. 684, p. 90-100

    Research output: Contribution to journalArticleResearchpeer-review

  41. Published
  42. Published

    Microstructure and mechanical properties of foundry Al-Si-Cu-Hf alloy

    Xing, Y., Jia, Z., LI, J., Ding, L., Huang, H. & Liu, Q., 2017, In : Materials Science and Engineering A. 684, p. 90-100

    Research output: Contribution to journalArticleResearchpeer-review

  43. Published

    The effect of residual stresses and strain reversal on the fracture toughness of TiAl alloys

    Appel, F., Paul, J., Staron, P., Kolednik, O., Predan, J., Oehring, M. & Fischer, F-D., 2017, In : Materials science and engineering: A, Structural materials: properties, microstructure and processing. 709, p. 17-29

    Research output: Contribution to journalArticleResearchpeer-review

  44. 2016
  45. Published
  46. Published

    Effect of cerium addition on microstructure and mechanical properties of high-strength Fe85Cr4Mo8V2C1 cast steel

    Hufenbach, J., Helth, A., Lee, M. H., Wendrock, H., Giebeler, L., Choe, C. Y., Kim, K. H., Kühn, U., Kim, T. S. & Eckert, J., 30 Sep 2016, In : Materials science and engineering: A, Structural materials: properties, microstructure and processing. 674, p. 366-374 9 p.

    Research output: Contribution to journalArticleResearchpeer-review

  47. Published
  48. Published

    Influence of Ag and Co additions on glass-forming ability, thermal and mechanical properties of Cu–Zr–Al bulk metallic glasses

    Escher, B., Kühn, U., Eckert, J., Rentenberger, C. & Pauly, S., 15 Sep 2016, In : Materials science and engineering: A, Structural materials: properties, microstructure and processing. 673, p. 90-98 9 p.

    Research output: Contribution to journalArticleResearchpeer-review

  49. Published

    Laser surface remelting of a Cu-Al-Ni-Mn shape memory alloy

    da Silva, M. R., Gargarella, P., Gustmann, T., Botta Filho, W. J., Kiminami, C. S., Eckert, J., Pauly, S. & Bolfarini, C., 20 Apr 2016, In : Materials science and engineering: A, Structural materials: properties, microstructure and processing. 661, p. 61-67 7 p.

    Research output: Contribution to journalArticleResearchpeer-review

  50. Published
  51. Published

    Impact of the B2 ordering behavior on the mechanical properties of a Fe Co Mo alloy

    Turk, C., Leitner, H., Kellezi, G., Clemens, H., Gan, W., Staron, P. & Primig, S., 2016, In : Materials science and engineering: A, Structural materials: properties, microstructure and processing. 662, p. 511-518 8 p., 662.

    Research output: Contribution to journalArticleResearchpeer-review

  52. Published
  53. Published

    Microstructure Evolution and Mechanical Properties of directionally solidified Mg-xGd (x¼0.8, 1.5,and2.5)alloys

    Luo, S., Yang, G., Liu, S., Wang, J., Li, J. & Jie, W., 2016, In : Materials science and engineering: A, Structural materials: properties, microstructure and processing. 662, p. 241-250 10 p.

    Research output: Contribution to journalArticleResearchpeer-review

  54. Published
  55. Published
  56. 2015
  57. Published

    Designed heterogeneities improve the fracture reliability of a Zr-based bulk metallic glass

    Li, B. S., Shakur Shahabi, H., Scudino, S., Eckert, J. & Kruzic, J. J., 14 Oct 2015, In : Materials science and engineering: A, Structural materials: properties, microstructure and processing. 646, p. 242-248 7 p.

    Research output: Contribution to journalArticleResearchpeer-review

  58. Published

    Revisiting fatigue crack growth in various grain size regimes of Ni

    Leitner, T., Hohenwarter, A. & Pippan, R., 14 Oct 2015, In : Materials science and engineering: A, Structural materials: properties, microstructure and processing. 646, p. 294-305 12 p., 32705.

    Research output: Contribution to journalArticleResearchpeer-review

  59. Published
  60. Published
  61. Published
  62. 2014
  63. Published
  64. Published
  65. Published

    Microstructural investigation of thermally aged nickel-based superalloy 718Plus

    Whitmore, L., Ahmadi, M. R., Stockinger, M., Povoden-Karadeniz, E., Kozeschnik, E. & Leitner, H., 2014, In : Materials science and engineering: A, Structural materials: properties, microstructure and processing. 594, p. 253-259

    Research output: Contribution to journalArticleResearchpeer-review

  66. Published

    The microstructure of heat-treated nickel-based superalloy 718Plus

    Whitmore, L., Ahmadi, M. R., Guetaz, L., Leitner, H., Povoden-Karadeniz, E., Stockinger, M. & Kozeschnik, E., 2014, In : Materials science and engineering: A, Structural materials: properties, microstructure and processing. 610, p. 39-45

    Research output: Contribution to journalArticleResearchpeer-review

  67. 2013
  68. Published
  69. Published
  70. Published
  71. Published

    Influence of bulk pre-straining on the size effect in nickel compression pillars

    Schneider, A. S., Kiener, D., Yakacki, C. M., Maier, H. J., Gruber, P. A., Tamura, N., Kunz, M., Minor, A. M. & Frick, C. P., 2013, In : Materials science and engineering: A, Structural materials: properties, microstructure and processing. 559, p. 147-158 12 p.

    Research output: Contribution to journalArticleResearchpeer-review

  72. Published
  73. Published

    Influence of morphology and structural size on the fracture behavior of a nanostructured pearlitic steel

    Kammerhofer, C., Hohenwarter, A., Scheriau, S., Brantner, H. P. & Pippan, R., 2013, In : Materials science and engineering: A, Structural materials: properties, microstructure and processing. 585, p. 190-196

    Research output: Contribution to journalArticleResearchpeer-review

  74. Published
  75. Published

    The effect of main alloying elements on the physical properties of Al–Si foundry alloys

    Stadler, F., Antrekowitsch, H., Fragner, W., Kaufmann, H., Pinatel, E. & Uggowitzer, P. J., 2013, In : Materials science and engineering: A, Structural materials: properties, microstructure and processing. p. 1-1

    Research output: Contribution to journalArticleResearchpeer-review

  76. Published
  77. 2012
  78. Published

    In situ formation of carbon nanotubes and ceramic whiskers in Al2O3-C refractories with addition of Ni-catalyzed phenolic resin

    Luo, M., Li, Y., Sang, S., Zhao, L., Jin, S. & Li, Y., 15 Dec 2012, In : Materials science and engineering: A, Structural materials: properties, microstructure and processing. 558, p. 533-542

    Research output: Contribution to journalArticleResearchpeer-review

  79. Published

    Microstructures and mechanical properties of Al2O3-C refractories with addition of multi-walled carbon nanotubes

    Luo, M., Li, Y., Jin, S., Sang, S., Zhao, L. & Li, Y., 30 Jun 2012, In : Materials science and engineering: A, Structural materials: properties, microstructure and processing. 548, p. 134-141

    Research output: Contribution to journalArticleResearchpeer-review

  80. Published
  81. Published

    Influence of the heating rate on the recrystallization behavior of molybdenum

    Primig, S., Leitner, H., Knabl, W., Lorich, A., Clemens, H. & Stickler, R., 2012, In : Materials science and engineering: A, Structural materials: properties, microstructure and processing. 535, p. 316-324

    Research output: Contribution to journalArticleResearchpeer-review

  82. Published

    Precipitation microstructure and age-hardening response of an Mg-Gd-Nd-Zn-Zr alloy

    Li, J., Sha, G., Wang, T., Jie, W. & Ringer, S., 2012, In : Materials science and engineering: A, Structural materials: properties, microstructure and processing. 534, p. 1-6

    Research output: Contribution to journalArticleResearchpeer-review

  83. Published
  84. Published
  85. Published

    Transmission electron microscopy of single and double aged 718plus superalloy

    Whitmore, L., Leitner, H., Povoden-Karadeniz, E., Radis, R. & Stockinger, M., 2012, In : Materials science and engineering: A, Structural materials: properties, microstructure and processing. 534, p. 413-423

    Research output: Contribution to journalArticleResearchpeer-review

  86. 2011
  87. Published

    Deformation mechanisms of a modified 316L austenitic steel subjected to high pressure torsion

    Scheriau, S., Zhang, Z., Kleber, S. & Pippan, R., 2011, In : Materials science and engineering: A, Structural materials: properties, microstructure and processing. p. 2776-2786

    Research output: Contribution to journalArticleResearchpeer-review

  88. Published
  89. Published
  90. Published

    Significance of temperature increase in processing by high-pressure torsion

    Edalati, K., Miresmaeili, R., Horita, Z., Kanayama, H. & Pippan, R., 2011, In : Materials science and engineering: A, Structural materials: properties, microstructure and processing. p. 7301-7305

    Research output: Contribution to journalArticleResearchpeer-review

  91. 2010
  92. Published

    Anisotropic fracture behavior of ultrafine-grained iron

    Hohenwarter, A. & Pippan, R., 2010, In : Materials science and engineering: A, Structural materials: properties, microstructure and processing. 527, p. 2649-2656

    Research output: Contribution to journalArticleResearchpeer-review

  93. Published

    Hardening and microstructure reactions in high-temperature Equal-Channel Angular Pressed Mg-Nd-Gd-Zn-Zr alloy

    Li, J., Sha, G., Xu, W., Xia, K., Jie, W. & Simon, R., 2010, In : Materials science and engineering: A, Structural materials: properties, microstructure and processing. 527, p. 5092-5099

    Research output: Contribution to journalArticleResearchpeer-review

  94. Published
  95. Published
  96. Published

    Local and global measures of the fracture toughness of metal matrix composites

    Kolednik, O. & Sabirov, I., 2010, In : Materials science and engineering: A, Structural materials: properties, microstructure and processing. p. 3100-3110

    Research output: Contribution to journalArticleResearchpeer-review

  97. Published
  98. 2009
  99. Published
  100. Published
  101. Published

    Modeling fatigue crack growth in a bimaterial specimen with the configurational forces concept

    Kolednik, O., Predan, J., Gubeljak, N. & Fischer, F. D., 2009, In : Materials science and engineering: A, Structural materials: properties, microstructure and processing. 519, p. 172-183

    Research output: Contribution to journalArticleResearchpeer-review

  102. Published
  103. 2008
  104. Published
  105. Published
  106. Published

    Influence of grain size on orientation changes during plastic deformation

    Scheriau, S. & Pippan, R., 2008, In : Materials science and engineering: A, Structural materials: properties, microstructure and processing. 493, p. 48-52

    Research output: Contribution to journalArticleResearchpeer-review

  107. Published

    On the overaging behaviour of tool steel X38CrMoV5-3

    Bischof, M., Staron, P., Caliskanoglu, Z. D., Leitner, H., Scheu, C. & Clemens, H., 2008, In : Materials science and engineering: A, Structural materials: properties, microstructure and processing. 472, p. 148-152

    Research output: Contribution to journalArticleResearchpeer-review

  108. Published

    Precipitation processes in a Mg–Zn–Sn alloy studied by TEM and SAXS

    Rashkova, B., Prantl, W., Görgl, R., Keckes, J., Cohen, S., Bamberger, M. & Dehm, G., 2008, In : Materials science and engineering: A, Structural materials: properties, microstructure and processing. A494, p. 158-164

    Research output: Contribution to journalArticleResearchpeer-review

  109. 2007
  110. Published
  111. Published

    Changes in the mechanical properties of a pearlitic steel due to large shear deformation

    Wetscher, F., Stock, R. & Pippan, R., 2007, In : Materials science and engineering: A, Structural materials: properties, microstructure and processing. 445-446, p. 237-243

    Research output: Contribution to journalArticleResearchpeer-review

  112. Published
  113. 2006
  114. Published

    Annealing studies of nanocomposite Ti-Si-C thin films with respect to phase stability and tribological performance

    Rester, M., Neidhardt, J., Eklund, P., Emmerlich, J., Ljungcrantz, H., Hultman, L. & Mitterer, C., 2006, In : Materials science and engineering: A, Structural materials: properties, microstructure and processing. 429, p. 90-95

    Research output: Contribution to journalArticleResearchpeer-review

  115. Published

    Characterisation of Residual Stresses in Turbine Discs by Neutron and High-Energy X-Ray Diffraction and Comparisation to Finite Element Modeling

    Cihak, U., Staron, P., Clemens, H., Homeyer, J., Stockinger, M. & Tockner, J., 2006, In : Materials science and engineering: A, Structural materials: properties, microstructure and processing. 437, p. 75-82

    Research output: Contribution to journalArticleResearchpeer-review

  116. Published

    Comparison of NiAl precipitation in a medium carbon secondary hardening steel and C-free PH13-8 maraging steel

    Erlach, S. D., Leitner, H., Bischof, M., Clemens, H., Danoix, F., Lemarchand, D. & Siller, I., 2006, In : Materials science and engineering: A, Structural materials: properties, microstructure and processing. 429, p. 96-106

    Research output: Contribution to journalArticleResearchpeer-review

  117. Published

    Dynamic recrystallization of NI-base alloys-Experimental results and comparisons with simulations

    Poelt, P., Sommitsch, C., Mitsche, S. & Walter, M., 2006, In : Materials science and engineering: A, Structural materials: properties, microstructure and processing. p. 306-314

    Research output: Contribution to journalArticleResearchpeer-review

  118. Published

    Evolution of misorientation distribution during warm 'abc' forging of commercial-purity titanium

    Mironov, S. Y., Salishchev, G. A., Myshlyaev, M. M. & Pippan, R., 2006, In : Materials science and engineering: A, Structural materials: properties, microstructure and processing. 418, p. 257-267

    Research output: Contribution to journalArticleResearchpeer-review

  119. Published

    Microstructural evolution of Cr-Mn-N Austenitic Steels during Cold Work Hardening

    Saller, G., Spiradek-Hahn, K., Scheu, C. & Clemens, H., 2006, In : Materials science and engineering: A, Structural materials: properties, microstructure and processing. 427, p. 246-254

    Research output: Contribution to journalArticleResearchpeer-review

  120. Published

    On the texture of spray formed gamma titanium aluminide

    Staron, P., Bartels, A., Brokmeier, H-G., Gerling, R., Schimansky, F-P. & Clemens, H., 2006, In : Materials science and engineering: A, Structural materials: properties, microstructure and processing. 416, p. 11-17

    Research output: Contribution to journalArticleResearchpeer-review

  121. Published

    Shape Factors in Modeling of Precipitation

    Kozeschnik, E., Svoboda, J. & Fischer, F. D., 2006, In : Materials science and engineering: A, Structural materials: properties, microstructure and processing. 441, p. 68-72

    Research output: Contribution to journalArticleResearchpeer-review

  122. Published

    The High-temperature Background in Intermetallic Alloys

    Weller, M., Clemens, H. & Haneczok, G., 2006, In : Materials science and engineering: A, Structural materials: properties, microstructure and processing. 442, p. 138-141

    Research output: Contribution to journalArticleResearchpeer-review

  123. 2005
  124. Published
  125. Published
  126. Published

    Analysis of the Precipitation Behaviour in a High Speed Steel with Small Angle Neutron Scattering

    Leitner, H., Staron, P., Clemens, H., Marsoner, S. & Warbichler, P., 2005, In : Materials science and engineering: A, Structural materials: properties, microstructure and processing. 398, p. 323-331

    Research output: Contribution to journalArticleResearchpeer-review

  127. Published

    Discrete dislocation simulation of nanoindentation: The effect of statistically distributed dislocations

    Kreuzer, H. G. M. & Pippan, R., 2005, In : Materials science and engineering: A, Structural materials: properties, microstructure and processing. 400-401, p. 460-462

    Research output: Contribution to journalArticleResearchpeer-review

  128. Published
  129. Published
  130. Published
  131. Published
  132. Published

    Nanoscaled structure of a Cu-Fe composite processed by high-pressure torsion

    Sauvage, X. & Pippan, R., 2005, In : Materials science and engineering: A, Structural materials: properties, microstructure and processing. 410-411, p. 345-347

    Research output: Contribution to journalArticleResearchpeer-review

  133. Published
  134. Published

    Strain hardening during high pressure torsion deformation

    Wetscher, F., Vorhauer, A. & Pippan, R., 2005, In : Materials science and engineering: A, Structural materials: properties, microstructure and processing. 410-411, p. 213-216

    Research output: Contribution to journalArticleResearchpeer-review

  135. Published

    Stress/Strain Behaviour and Fatigue Limit of Grey Cast Iron

    Willidal, T., Bauer, W. & Schumacher, P., 2005, In : Materials science and engineering: A, Structural materials: properties, microstructure and processing. p. 578-582

    Research output: Contribution to journalArticleResearchpeer-review

  136. Published
  137. Published

    The determination of the local conditions for void initiation in front of a crack tip for materials with second-phase particles

    Sabirov, I., Duschlbauer, D., Pettermann, H. E. & Kolednik, O., 2005, In : Materials science and engineering: A, Structural materials: properties, microstructure and processing. 393, p. 275-285

    Research output: Contribution to journalArticleResearchpeer-review

  138. 2004
  139. Published

    Quantitative determination of the volume fraction of intergranular amorphous phase in sintered silicon nitride

    Roebben, G., Sarbu, C., Lube, T. & Van der Biest, O., 15 Apr 2004, In : Materials science and engineering: A, Structural materials: properties, microstructure and processing. 370, 1-2, p. 453-458 6 p.

    Research output: Contribution to journalArticleResearchpeer-review

  140. Published

    Discrete dislocation simulation of nanoindentation: the effect of moving conditions and indenter shape

    Kreuzer, H. G. M. & Pippan, R., 2004, In : Materials science and engineering: A, Structural materials: properties, microstructure and processing. 387-389, p. 254-256

    Research output: Contribution to journalArticleResearchpeer-review

  141. Published

    Effect of thermal treatment on microstructure in high pressure torsion (HPT) deformed nickel

    Schafler, E. & Pippan, R., 2004, In : Materials science and engineering: A, Structural materials: properties, microstructure and processing. 387-389, p. 799-804

    Research output: Contribution to journalArticleResearchpeer-review

  142. Published

    Erratum to "On the experimental characterization of crystal plasticity in polycrystals"

    Tatschl, A. & Kolednik, O., 2004, In : Materials science and engineering: A, Structural materials: properties, microstructure and processing. A 364, p. 384-399

    Research output: Contribution to journalArticleResearchpeer-review

  143. Published
  144. Published
  145. Published
  146. Published

    Structural refinement of low alloyed steels during severe plastic deformation

    Wetscher, F., Vorhauer, A., Stock, R. & Pippan, R., 2004, In : Materials science and engineering: A, Structural materials: properties, microstructure and processing. 387-389, p. 806-816

    Research output: Contribution to journalArticleResearchpeer-review

  147. 2003
  148. Published

    Effect of back stress evolution due to martensitic transformation on iso-volume fraction lines in a Cr-Ni-Mo-Al-Ti maraging steel

    Tanaka, K., Terasaki, T., Goto, S., Antretter, T., Fischer, F. D. & Cailletaud, G., 20 Jan 2003, In : Materials science and engineering: A, Structural materials: properties, microstructure and processing. 341, 1-2, p. 189-196 8 p.

    Research output: Contribution to journalArticleResearchpeer-review

  149. 2002
  150. Published

    Back stress evolution and iso-volume fraction lines in a Cr-Ni-Mo-Al-Ti maraging steel in the process of martensitic transformation

    Nagayama, K., Terasaki, T., Goto, S., Tanaka, K., Antretter, T., Fischer, F. D., Cailletaud, G. & Azzouz, F., 25 Oct 2002, In : Materials science and engineering: A, Structural materials: properties, microstructure and processing. 336, 1-2, p. 30-38 9 p.

    Research output: Contribution to journalArticleResearchpeer-review

  151. 2001
  152. Published

    Mechanical properties of a Cr-Ni-Mo-Al-Ti maraging steel in the process of martensitic transformation

    Nagayama, K., Terasaki, T., Tanaka, K., Fischer, F. D., Antretter, T., Cailletaud, G. & Azzouz, F., 30 Jun 2001, In : Materials science and engineering: A, Structural materials: properties, microstructure and processing. 308, 1-2, p. 25-37 13 p.

    Research output: Contribution to journalArticleResearchpeer-review

  153. Published
  154. Published
  155. 1997
  156. Published
  157. Published
  158. 1994
  159. Published
  160. 1991
  161. Published
  162. Published
  163. Published

    Solid-Liquid Interfacial Free Energy

    Ludwig, A., 1991, In : Materials science and engineering: A, Structural materials: properties, microstructure and processing. p. 577-580

    Research output: Contribution to journalArticleResearchpeer-review