Materials Science Forum, 0255-5476

Journal

ISSNs0255-5476, 1662-9760, 1662-9752
Additional searchable ISSN (Electronic)1662-9752

Research output

  1. Article › Research › Peer-reviewed
  2. Published
  3. Published

    "Influence of crystal morphological parameters on the solidification of ESR ingot"

    Karimi Sibaki, E., Kharicha, A., Wu, M., Ludwig, A. & Korp, J., 2014, In : Materials Science Forum. p. 396-401

    Research output: Contribution to journalArticleResearchpeer-review

  4. Published

    "Numerical Study of the Influence of Diffusion-Governed Growth Kinetics on Macrosegregation"

    Wu, M., Kharicha, A. & Ludwig, A., 2014, In : Materials Science Forum. p. 85-90

    Research output: Contribution to journalArticleResearchpeer-review

  5. Published

    A Study of Recrystallization and Phase Transitions in Intermetallic Titanium Aluminides by In-Situ High-Energy Diffraction

    Liss, K-D., BARTELS, A., Clemens, H., Bystrzanowski, S., Stark, A., Buslaps, T., Schimansky, F-P., Gerling, R. & Schreyer, A., 2007, In : Materials Science Forum. 539-543, p. 1519-1524

    Research output: Contribution to journalArticleResearchpeer-review

  6. Published

    A fracture mechanics investigation on crack growth in massive forming

    Trattnig, G., Sommitsch, C. & Pippan, R., 2005, In : Materials Science Forum. p. 339-342

    Research output: Contribution to journalArticleResearchpeer-review

  7. Published

    A numerical study of the influence of pouring technique on the as-cast structure of Al-Cu ingots

    Ahmadein, M., Wu, M., Schumacher, P. & Ludwig, A., 2014, In : Materials Science Forum. p. 67-72

    Research output: Contribution to journalArticleResearchpeer-review

  8. Published

    Advanced Intermetallic TiAl Alloys

    Clemens, H. & Mayer, S., 2017, In : Materials Science Forum. 879, p. 113-118 6 p.

    Research output: Contribution to journalArticleResearchpeer-review

  9. Published

    Advanced Titanium Aluminides - How to Improve the Creep Resistance via Compsitional and Microstructural Optimization

    Mayer, S., Kastenhuber, M. & Clemens, H., 2018, In : Materials Science Forum. 2018, 941, p. 1484-1489 6 p.

    Research output: Contribution to journalArticleResearchpeer-review

  10. Published

    Advantages and limitations of HPT: A review

    Pippan, R., Scheriau, S., Hohenwarter, A. & Hafok, M., 2008, In : Materials Science Forum. 584-586, p. 16-21

    Research output: Contribution to journalArticleResearchpeer-review

  11. Published

    An Overview on the Fracture Behavior of Metals Processed by High Pressure Torsion

    Hohenwarter, A. & Pippan, R., 2011, In : Materials Science Forum. 667-669, p. 671-676

    Research output: Contribution to journalArticleResearchpeer-review

  12. Published

    Characterization of the mechanical and fatigue behavior of braided composites made of twisted yarns

    Wolfahrt, M., Grosser, J., Fleischmann, M., Schubert, M. & Pinter, G., 2015, In : Materials Science Forum. 825-826, p. 876 882 p.

    Research output: Contribution to journalArticleResearchpeer-review

  13. Published

    Columnar to Equiaxed Transition During Ingot Casting Using Ternary Alloy Composition

    Könözsy, L., Ishmurzin, A., Grasser, M., Wu, M., Ludwig, A., Tanzer, R. & Schützenhöfer, W., 2010, In : Materials Science Forum. 649, p. 349-354

    Research output: Contribution to journalArticleResearchpeer-review

  14. Published

    Comparison of single crystalline and polycrystalline behavior under high pressure torsion

    Hafok, M. & Pippan, R., 2007, In : Materials Science Forum. 550, p. 227-282

    Research output: Contribution to journalArticleResearchpeer-review

  15. Published

    Composite-Composite Joining with through the Thickness Reinforcements for Enhanced Damage Tolerance

    Stelzer, S., Ucsnik, S. & Pinter, G., 2015, In : Materials Science Forum. 826-826, p. 883-890 10 p.

    Research output: Contribution to journalArticleResearchpeer-review

  16. Published

    Correlation between supersaturation of solid solution and mechanical behaviour of two binary Al-Si-alloys

    Schumacher, P., Reich, M., Mohles, V., Pogatscher, S., Uggowitzer, P. J. & Milkereit, B., 2014, In : Materials Science Forum. p. 508-514

    Research output: Contribution to journalArticleResearchpeer-review

  17. Published

    Crystal restoration during severe plastic deformation

    Stüwe, H-P., 2006, In : Materials Science Forum. 503-504, p. 175-178

    Research output: Contribution to journalArticleResearchpeer-review

  18. Published

    Differences in structural evolution in single- and dual-phase materials during severe plastic deformation

    Pippan, R., Vorhauer, A., Wetscher, F., Faleschini, M., Hofak, M. & Sabirov, I., 2006, In : Materials Science Forum. 503-504, p. 407-412

    Research output: Contribution to journalArticleResearchpeer-review

  19. Published

    Effect of Impurities on the Microstructure of HPT Deformed Nickel

    Rathmayer, G. & Pippan, R., 2011, In : Materials Science Forum. p. 797-802

    Research output: Contribution to journalArticleResearchpeer-review

  20. Published

    Experimental Observation of Convection during Equiaxed Solidification of Transparent Alloys

    Ludwig, A., Eck, S. & Mogeritsch, J., 2006, In : Materials Science Forum. p. 157-162

    Research output: Contribution to journalArticleResearchpeer-review

  21. Published

    Experimental investigation of the local deformation behaviour of MMCs

    Unterweger, K. & Kolednik, O., 2005, In : Materials Science Forum. 482, p. 211-214

    Research output: Contribution to journalArticleResearchpeer-review

  22. Published

    Fabrication of a W-25%Cu nanocomposite by high pressure torison

    Sabirov, I., Schöberl, T. & Pippan, R., 2006, In : Materials Science Forum. 503-504, p. 561-566

    Research output: Contribution to journalArticleResearchpeer-review

  23. Published

    Fatigue Delamination Growth in CFRP Composites: From Pure Mode I and Mode II to Mixed Mode I/II

    Stelzer, S. & Pinter, G., 2015, In : Materials Science Forum. 825-826, p. 914-921 9 p.

    Research output: Contribution to journalArticleResearchpeer-review

  24. Published

    Formation of high-angle grain boundaries in iron upon cold deformation by equal-channel angular pressing

    Dobatkin, S., Kopylov, V. I., Pippan, R. & Vasileva, O., 2007, In : Materials Science Forum. 460-470, p. 1277-1282

    Research output: Contribution to journalArticleResearchpeer-review

  25. Published

    Graviy-Induced Convection during Directional Solidification of Hypermonotectic Alloys

    Ludwig, A., Wu, M., Abondano, M. & Ratke, L., 2006, In : Materials Science Forum. 508-509, p. 193-198

    Research output: Contribution to journalArticleResearchpeer-review

  26. Published

    HPT-Deformation of copper an nickel single crystals

    Hafok, M., Vorhauer, A., Keckes, J. & Pippan, R., 2006, In : Materials Science Forum. 503-504, p. 621-626

    Research output: Contribution to journalArticleResearchpeer-review

  27. Published

    High pressure torsion of rail steels

    Wetscher, F., Tian, B., Stock, R. & Pippan, R., 2006, In : Materials Science Forum. 503-504, p. 455-460

    Research output: Contribution to journalArticleResearchpeer-review

  28. Published

    In situ annealing of severe plastic deformed OFHC copper

    Scheriau, S., Vorhauer, A. & Pippan, R., 2007, In : Materials Science Forum. 558-559, p. 1345-1351

    Research output: Contribution to journalArticleResearchpeer-review

  29. Published

    In situ observation of solidification in an organic peritectic alloy system

    Mogeritsch, J., Eck, S., Grasser, M. & Ludwig, A., 2010, In : Materials Science Forum. p. 159-164

    Research output: Contribution to journalArticleResearchpeer-review

  30. Published

    Influence of Convection and Surface Effects on Macrosegregations in Eutectic and Peritectic Systems

    Ludwig, A., Ehlen, G. & Sahm, P., 2000, In : Materials Science Forum. p. 105-109

    Research output: Contribution to journalArticleResearchpeer-review

  31. Published

    Influence of the slag/pool interface on the solidification in an electroslag remelting process

    Kharicha, A., Schuetzenhoefer, W., Ludwig, A. & Reiter, G., 2010, In : Materials Science Forum. p. 229-236

    Research output: Contribution to journalArticleResearchpeer-review

  32. Published

    Interaction of Recrystallization and Precipitation during Hot Forming of Alloy 80 A

    Sommitsch, C., Pölt, P., Rüf, G., Mitsche, S. & Albu, M., 2007, In : Materials Science Forum. p. 2988-2993

    Research output: Contribution to journalArticleResearchpeer-review

  33. Published

    Interaction of the precipitation kinetics of beta and gamma Phases in nickel-base superalloy ati allvac 718Plus TM

    Radis, R., Zickler, G., Stockinger, M., Sommitsch, C. & Kozeschnik, E., 2010, In : Materials Science Forum. p. 2712-2717

    Research output: Contribution to journalArticleResearchpeer-review

  34. Published

    Investigation of Retained Strains during Multipass Deformation

    Candic, M., Tian, B., Kleber, S., Wiesner, M. & Sommitsch, C., 2007, In : Materials Science Forum. 558-559, p. 485-490

    Research output: Contribution to journalArticleResearchpeer-review

  35. Published

    Kinetics of the Austenite-to-Ferrite Phase Transformation – From the Intrinsic to an Effective Interface Mobility

    Gamsjäger, E., 2006, In : Materials Science Forum. 539-543, p. 2570-2575

    Research output: Contribution to journalArticleResearchpeer-review

  36. Published

    Local and global fracture properties in Metal Matrix Composites

    Sabirov, I. & Kolednik, O., 2005, In : Materials Science Forum. 482, p. 215-218

    Research output: Contribution to journalArticleResearchpeer-review

  37. Published

    MICROSTRUCTURAL ASSESSMENT OF IN718:

    Stoschka, M., Maderbacher, H. & Stockinger, M., 2012, In : Materials Science Forum. 706-709, p. 2468-2473

    Research output: Contribution to journalArticleResearchpeer-review

  38. Published

    Magnetic properties and microstructure of a FeCo ferritic steel after severe plastic deformation

    Vorhauer, A., Rumpf, K., Granitzer, P., Kleber, S., Krenn, H. & Pippan, R., 2006, In : Materials Science Forum. 503-504, p. 299-304

    Research output: Contribution to journalArticleResearchpeer-review

  39. Published

    Measurment of All Six Components of X-Ray Elastic Factors

    Ortner, B., Antretter, T., Hofmann, M. & Werner, E., 2008, In : Materials Science Forum. 571-572, p. 225-229

    Research output: Contribution to journalArticleResearchpeer-review

  40. Published

    Microstructure and Properties of a Fe-Cu Composite Processed by HPT Powder Consolidation

    Bachmaier, A. & Pippan, R., 2011, In : Materials Science Forum. p. 229-234

    Research output: Contribution to journalArticleResearchpeer-review

  41. Published

    Microstructure of Pure Ni Subjected to High Pressure Torsion

    Zhang, H. W., Huang, X., Hansen, N. & Pippan, R., 2011, In : Materials Science Forum. p. 529-534

    Research output: Contribution to journalArticleResearchpeer-review

  42. Published

    Microstructure of a metal-polymer composite processed by severe plastic deformation

    Sauvage, X., Malandain, J. J. & Hohenwarter, A., 2008, In : Materials Science Forum. 584-586, p. 306-309

    Research output: Contribution to journalArticleResearchpeer-review

  43. Published

    Modeling and Investigation of Dynamic Recrystallisation in Nickel-Based Superalloys

    Sommitsch, C., Walter, M., Wedl, F. & Kleber, S., 2003, In : Materials Science Forum. p. 743-748

    Research output: Contribution to journalArticleResearchpeer-review

  44. Published

    Modification of eutectic Si in Al-Si based alloys

    Li, J., Albu, M., Ludwig, T. H., Matsubara, Y., Arnberg, L., Tsunekawa, Y. & Schumacher, P., 2014, In : Materials Science Forum. 794-796, p. 130-136

    Research output: Contribution to journalArticleResearchpeer-review

  45. Published

    Nano-Indentation of SiC and Si3N4/SiC ceramic materials

    Balog, M., Sajgalík, P., Lencés, Z., Hnatko, M., Keckes, J., Huang, J. L., Janega, J. & Horvathova, R., 2005, In : Materials Science Forum. 290, p. 272-275

    Research output: Contribution to journalArticleResearchpeer-review

  46. Published

    Negative Refraction and Left-handedness in 2D Archimedean-Lattice Photonic Crystals

    Gajic, R., Meisels, R., Kuchar, F., Jovanovic, D. & Hingerl, K., 2007, In : Materials Science Forum. 555, p. 83-88

    Research output: Contribution to journalArticleResearchpeer-review

  47. Published

    Numerical Study of the Thermal-Solutal Convection and Grain Sedimentation during Globular Equiaxed Solidification

    Wu, M., Ludwig, A. & Luo, J., 2005, In : Materials Science Forum. 475-479, p. 2725-2730

    Research output: Contribution to journalArticleResearchpeer-review

  48. Published

    Numerical and Experimental Investigation of NH4Cl Solidification

    Könözsy, L., Stefan Kharicha, M., Eck, S., Wu, M. & Ludwig, A., 2010, In : Materials Science Forum. 649, p. 367-372

    Research output: Contribution to journalArticleResearchpeer-review

  49. Published

    On the Morphological Transition from Cellular to Planar Growth at High Solidification Velocity

    Ludwig, A. & Kurz, W., 1996, In : Materials Science Forum. p. 13-17

    Research output: Contribution to journalArticleResearchpeer-review

  50. Published

    Overview of the Grain Size Effects on the Mechanical and Deformation Behaviour of Electrodeposited Nanocrystalline Nickel - from Nanoindentation to High Pressure Torsion

    Pippan, R., Yang, B. & Vehoff, H., 2010, In : Materials Science Forum. p. 85-98

    Research output: Contribution to journalArticleResearchpeer-review

  51. Published

    Phase Transition and Ordering Temperatures of TiAl-Mo Alloys Investigated by In-Situ Diffraction Experiments

    Schmölzer, T., Mayer, S., Haupt, F., Zickler, G., Sailer, C., Lottermoser, L., Güther, V., Liss, K-D. & Clemens, H., 2010, In : Materials Science Forum. p. 456-459

    Research output: Contribution to journalArticleResearchpeer-review

  52. Published

    Position resolved residual stress determination in alumina-zirconia multilayered ceramics

    Maier, G., Keckes, J., Brechbuehl, J., Guerault, H. & Bermejo Moratinos, R., 2008, In : Materials Science Forum. 571-572, p. 421-425

    Research output: Contribution to journalArticleResearchpeer-review

  53. Published

    Prediction of macrosegregation in steel ingot using a simplified denderitic model

    Li, J., Wu, M., Ludwig, A., Kharicha, A. & Karimi Sibaki, E., 2014, In : Materials Science Forum. 790-791, p. 121-126

    Research output: Contribution to journalArticleResearchpeer-review

  54. Published

    Recurring instability of cellular growth in a near peritectic transparent NPG-TRIS alloy system

    Ludwig, A. & Mogeritsch, J., 2014, In : Materials Science Forum.

    Research output: Contribution to journalArticleResearchpeer-review

  55. Published

    Severe plastic deformation of a bainitic rail steel

    Hohenwarter, A., Stock, R. & Pippan, R., 2008, In : Materials Science Forum. 584-586, p. 655-660

    Research output: Contribution to journalArticleResearchpeer-review

  56. Published

    Simulation of the Dendritic Solidification During Single Roller Quenchin

    Ludwig, A., 1991, In : Materials Science Forum. p. 211-215

    Research output: Contribution to journalArticleResearchpeer-review

  57. Published

    Single Edge Precrack V-Notched Beam (SEPVNB) Fracture Toughness Testing on Silicon Nitride

    Nindhia, T. G. T. & Lube, T., 2019, In : Materials Science Forum. p. 205-209

    Research output: Contribution to journalArticleResearchpeer-review

  58. Published

    Small Angle X-Ray Scattering with Cobalt Radiation for Nanostructure Characterization of Fe-Based Specimen

    Erlacher, K., Görgl, R., Keckes, J., Jakob, H., Bruegemann, L., Doppler, P., Bermann, A., Leitner, H., Marsoner, S. & Fratzl, P., 2004, In : Materials Science Forum. 443-444, p. 155-158

    Research output: Contribution to journalArticleResearchpeer-review

  59. Published

    Solute Trapping in Highly Undercooled Succinonitrile-Acetone Alloys

    Ludwig, A. & Ehlen, G., 2000, In : Materials Science Forum. p. 19-23

    Research output: Contribution to journalArticleResearchpeer-review

  60. Published

    Strength Distributions in Ceramic Laminates

    Pascual-Herrero, J., Chalvet, F., Lube, T. & De Portu, G., 2005, In : Materials Science Forum. 492-493, p. 492-493

    Research output: Contribution to journalArticleResearchpeer-review

  61. Published

    Stress Factors and Absolute Residual Stresses in Thin Films Determined by the Combination of Curvature and sin2ψ Methods

    Martinschitz, K-J., Eiper, E. & Keckes, J., 2006, In : Materials Science Forum. 524-525, p. 711-715

    Research output: Contribution to journalArticleResearchpeer-review

  62. Published

    Stress Relaxation Measurements of Metadynamic and Static Recrystallisation of Alloy 80A

    Kleber, S. & Sommitsch, C., 2004, In : Materials Science Forum. p. 1237-1242

    Research output: Contribution to journalArticleResearchpeer-review

  63. Published
  64. Published

    The effect of Ni on the high-temperature stregth of Al-Si cast alloys

    Stadler, F., Antrekowitsch, H., Fragner, W., Kaufmann, H. & Uggowitzer, P. J., 2011, In : Materials Science Forum. p. 274-277

    Research output: Contribution to journalArticleResearchpeer-review

  65. Published

    The role of vacancies in the aging of Al-Mg-Si alloys

    Pogatscher, S., Werinos, M., Antrekowitsch, H. & Uggowitzer, P. J., 2014, In : Materials Science Forum. p. 1008-1013

    Research output: Contribution to journalArticleResearchpeer-review

  66. Published

    Ultimate strength of a tungsten heavy alloy after severe plastic deformation at quasi-static and dynamic loading

    Meyer, L. W., M., H., Hohenwarter, A. & Schneider, S., 2008, In : Materials Science Forum. 584-586, p. 405-410

    Research output: Contribution to journalArticleResearchpeer-review

  67. Published

    Ultrafine Structure Formation in Aluminium Alloy Processed by HPT and the Mechanical Properties Response

    Zrník, J., Pippan, R., Scheriau, S. & Fujda, M., 2011, In : Materials Science Forum. p. 903-908

    Research output: Contribution to journalArticleResearchpeer-review