Practical metallography = Praktische Metallographie, 0032-678X

Journal

ISSNs0032-678X

Research output

  1. Published

    SEM and TEM Investigations of Recovery and Recrystallization in Technically Pure Molybdenum

    Primig, S., Leitner, H., Lorich, A., Knabl, W., Clemens, H. & Stickler, R., 2011, In : Practical metallography = Praktische Metallographie. p. 344-355

    Research output: Contribution to journalArticleResearchpeer-review

  2. Published
  3. Published

    Moderne Methoden zur mikroskopischen Charakterisierung von ZnO Varistor-Korngrenzen

    Raidl, N., Sartory, B., Supancic, P. & Danzer, R., 1 Apr 2018, In : Praktische Metallographie/Practical Metallography. 55, 4, p. 192-202 11 p.

    Research output: Contribution to journalArticleResearchpeer-review

  4. Published

    Automated SEM/EDX Particle Analysis to Determinate Non-Metallic Inclusions in Steel Samples

    Reischl, M., Frank, G., Martinez, C., Aigner, S., Lederhaas, B. & Michelic, S., 2011, In : Practical metallography = Praktische Metallographie. 12, p. 643-659

    Research output: Contribution to journalArticleResearchpeer-review

  5. Published

    Investigation of the self tempering effect of martensite by means of atom probe tomography

    Sackl, S. C., Clemens, H. & Primig, S., 2015, In : Practical metallography = Praktische Metallographie. 52, 7, p. 374-383

    Research output: Contribution to journalArticleResearchpeer-review

  6. Published
  7. Published
  8. Published

    Ungewöhnliche Rissbildung an einem Autoklaven bei Versuchen zum thermischen Cracken von anthropogenen Ressourcen

    Schmid, A., Mori, G. K., Strobl, S. & Haubner, R., 18 Jan 2018, In : Practical metallography = Praktische Metallographie. Vol. 55, 4, p. 244-253

    Research output: Contribution to journalArticleResearchpeer-review

  9. Published

    Hochtemperaturkorrosion des Stahls X15CrNiSi25-21 (1.4841) in einer Mischgasatmosphäre-Probenpräparation und Schädigungsmechanismus

    Schmid, A., Mori, G., Hönig, S., Strobl, S. & Haubner, R., 1 Jan 2019, In : Praktische Metallographie/Practical Metallography. 56, 7, p. 457-468 12 p.

    Research output: Contribution to journalArticleResearchpeer-review

  10. Published

    Dynamic Recovery and Recrystallization During Hot-Working in an Advanced TiAl Alloy

    Schmölzer, T., Liss, K-D., Rester, M., Yan, K., Stark, A., Reid, M., Peel, M. & Clemens, H., 2011, In : Practical metallography = Praktische Metallographie. 48, p. 632-642

    Research output: Contribution to journalArticleResearchpeer-review

  11. Published

    Mikrostrukturelle Charakterisierung von PH 13-8 Mo Maraging-Stählen

    Schnitzer, R., Hochfellner, R., Nöhrer, M., Schober, M., Clemens, H., Zinner, S. & Leitner, H., 2009, In : Practical metallography = Praktische Metallographie. p. 521-536

    Research output: Contribution to journalArticleResearchpeer-review

  12. Published

    Herstellung lamellarer Gefügetypen in intermetallischen TiAl-Legierungen und deren Charakterisierung

    Schnitzer, R., Chladil, H., Scheu, C., Clemens, H., Bystrzanowski, S., Bartels, A. & Kremmer, S., 2007, In : Practical metallography = Praktische Metallographie. 44, p. 430-443

    Research output: Contribution to journalArticleResearchpeer-review

  13. Published
  14. Published

    Influence of heat treatments on the microstructure of a multi-phase titanium aluminide alloy

    Schwaighofer, E., Schloffer, M., Schmölzer, T., Mayer, S., Lindemann, J., Guether, V., Klose, J. & Clemens, H., 2012, In : Practical metallography = Praktische Metallographie. 49, p. 124-137

    Research output: Contribution to journalArticleResearchpeer-review

  15. Published
  16. Published
  17. Published

    A Mechanical Method for Preparing TEM Samples from Brittle Films on Compliant Substrates

    Taylor, A. A., Cordill, M., Moser, G. & Dehm, G., 2011, In : Practical metallography = Praktische Metallographie. 48, p. 408-413

    Research output: Contribution to journalArticleResearchpeer-review

  18. Published

    Influence of the sample preparation technique on the μ phase fraction analysis in a Fe-25Co-15Mo alloy by means of XRD

    Turk, C., Clemens, H., Primig, S., Kellezi, G. & Leitner, H., 2015, In : Practical metallography = Praktische Metallographie. 52, 6, p. 323-333

    Research output: Contribution to journalArticleResearchpeer-review

  19. Published

    Thin Ribbons of CuAlNi Shape Memory Alloys Manufactured by Melt-Spinning

    Unterweger, E., Lojen, G., Kneißl, A. & Anzel, I., 2005, In : Practical metallography = Praktische Metallographie. 42, p. 435-444

    Research output: Contribution to journalArticleResearchpeer-review

  20. Published