Practical metallography = Praktische Metallographie, 0032-678X

Journal

ISSNs0032-678X

Research output

  1. 2011
  2. Published

    A Mechanical Method for Preparing TEM Samples from Brittle Films on Compliant Substrates

    Taylor, A. A., Cordill, M., Moser, G. & Dehm, G., 2011, In : Practical metallography = Praktische Metallographie. 48, p. 408-413

    Research output: Contribution to journalArticleResearchpeer-review

  3. Published

    Automated SEM/EDX Particle Analysis to Determinate Non-Metallic Inclusions in Steel Samples

    Reischl, M., Frank, G., Martinez, C., Aigner, S., Lederhaas, B. & Michelic, S., 2011, In : Practical metallography = Praktische Metallographie. 12, p. 643-659

    Research output: Contribution to journalArticleResearchpeer-review

  4. Published

    Defects and Fracture Statistics in Low-Pressure Injection Moulded Alumina Components

    Lube, T. & Kraleva, I., 2011, In : Practical metallography = Praktische Metallographie. 48, p. 488-495

    Research output: Contribution to journalArticleResearchpeer-review

  5. Published

    Dynamic Recovery and Recrystallization During Hot-Working in an Advanced TiAl Alloy

    Schmölzer, T., Liss, K-D., Rester, M., Yan, K., Stark, A., Reid, M., Peel, M. & Clemens, H., 2011, In : Practical metallography = Praktische Metallographie. 48, p. 632-642

    Research output: Contribution to journalArticleResearchpeer-review

  6. Published

    Friction Welding of Intermetallic Titanium Aluminides: Microstructural Evolution and Mechanical Properties

    Mayer, S., Appel, L., Cramer, H. & Clemens, H., 2011, In : Practical metallography = Praktische Metallographie. 48, p. 572-581

    Research output: Contribution to journalArticleResearchpeer-review

  7. Published

    Influence of Surface Quality on the Biaxial Strength of silicon Nitride Specimens

    Harrer, W., Danzer, R. & Supancic, P., 2011, In : Practical metallography = Praktische Metallographie. 48, p. 515-526

    Research output: Contribution to journalArticleResearchpeer-review

  8. Published
  9. Published

    Microstructural Changes during Vacuum Carburizing of Steels

    Bruncko, M., Anzel, I. & Kneißl, A., 2011, In : Practical metallography = Praktische Metallographie. 48, p. 398-407

    Research output: Contribution to journalArticleResearchpeer-review

  10. Published

    SEM and TEM Investigations of Recovery and Recrystallization in Technically Pure Molybdenum

    Primig, S., Leitner, H., Lorich, A., Knabl, W., Clemens, H. & Stickler, R., 2011, In : Practical metallography = Praktische Metallographie. p. 344-355

    Research output: Contribution to journalArticleResearchpeer-review

  11. Published
  12. 2012
  13. Published

    Influence of heat treatments on the microstructure of a multi-phase titanium aluminide alloy

    Schwaighofer, E., Schloffer, M., Schmölzer, T., Mayer, S., Lindemann, J., Guether, V., Klose, J. & Clemens, H., 2012, In : Practical metallography = Praktische Metallographie. 49, p. 124-137

    Research output: Contribution to journalArticleResearchpeer-review

  14. Published

    Microstructural investigation of melt-spun NiTi based ribbons

    Mehrabi, K., Bruncko, M. & Kneißl, A., 2012, In : Practical metallography = Praktische Metallographie. 49, p. 544-555

    Research output: Contribution to journalArticleResearchpeer-review

  15. Published

    Sample Preparation by Metallography and Focused Ion Beam for Nanomechanical Testing

    Moser, G., Felber, H., Rashkova, B., Imrich, P. J., Kirchlechner, C., Grosinger, W., Motz, C., Dehm, G. & Kiener, D., 2012, In : Practical metallography = Praktische Metallographie. 49, p. 343-355

    Research output: Contribution to journalArticleResearchpeer-review

  16. 2014
  17. Published
  18. 2015
  19. Published

    Heat Treatment-Induced Improvement of the Thermal Shock Resistance of Si3N4 Tools for Metallurgical Applications

    Harrer, W., Danzer, R. & Berroth, K., 2015, In : Practical metallography = Praktische Metallographie. 52, 4, p. 191-204 14 p.

    Research output: Contribution to journalArticleResearchpeer-review

  20. Published
  21. Published

    Influence of discontinuous precipitation on the creep behavior of a ß-solidified γ-TiAl based alloy

    Kastenhuber, M., Lehner, A., Hawranek, G., Krajnc, B., Clemens, H. & Mayer, S., 2015, In : Practical metallography = Praktische Metallographie. 52, 5, p. 249-258

    Research output: Contribution to journalArticleResearchpeer-review

  22. Published

    Influence of the sample preparation technique on the μ phase fraction analysis in a Fe-25Co-15Mo alloy by means of XRD

    Turk, C., Clemens, H., Primig, S., Kellezi, G. & Leitner, H., 2015, In : Practical metallography = Praktische Metallographie. 52, 6, p. 323-333

    Research output: Contribution to journalArticleResearchpeer-review

  23. Published
  24. Published

    Investigation of the self tempering effect of martensite by means of atom probe tomography

    Sackl, S. C., Clemens, H. & Primig, S., 2015, In : Practical metallography = Praktische Metallographie. 52, 7, p. 374-383

    Research output: Contribution to journalArticleResearchpeer-review