Practical metallography = Praktische Metallographie, 0032-678X

Journal

ISSNs0032-678X

Research output

  1. Published

    A Mechanical Method for Preparing TEM Samples from Brittle Films on Compliant Substrates

    Taylor, A. A., Cordill, M., Moser, G. & Dehm, G., 2011, In : Practical metallography = Praktische Metallographie. 48, p. 408-413

    Research output: Contribution to journalArticleResearchpeer-review

  2. Published
  3. Published

    Aspects of Powder Characterization for Additive Manufacturing

    Wimler, D., Kardos, S., Lindemann, J., Clemens, H. & Mayer, S., 2018, In : Practical metallography = Praktische Metallographie. 55.2018, 9, p. 620-636 17 p.

    Research output: Contribution to journalArticleResearchpeer-review

  4. Published
  5. Published

    Automated SEM/EDX Particle Analysis to Determinate Non-Metallic Inclusions in Steel Samples

    Reischl, M., Frank, G., Martinez, C., Aigner, S., Lederhaas, B. & Michelic, S., 2011, In : Practical metallography = Praktische Metallographie. 12, p. 643-659

    Research output: Contribution to journalArticleResearchpeer-review

  6. Published
  7. Published
  8. Published
  9. Published

    Damage-Sequences of Mountain Anchors

    Freitag, C. & Panzenböck, M., Jan 2017, In : Practical metallography = Praktische Metallographie. p. 6-18 13 p.

    Research output: Contribution to journalArticleResearchpeer-review

  10. Published

    Defects and Fracture Statistics in Low-Pressure Injection Moulded Alumina Components

    Lube, T. & Kraleva, I., 2011, In : Practical metallography = Praktische Metallographie. 48, p. 488-495

    Research output: Contribution to journalArticleResearchpeer-review

  11. Published

    Defects and Fracture Statistics in Low-pressure Injection Moulded Alumina Components

    Lube, T., Kraleva, I. & Veskovic, S., 2010, In : Practical metallography = Praktische Metallographie. 42, p. 159-164

    Research output: Contribution to journalArticleResearchpeer-review

  12. Published

    Dynamic Recovery and Recrystallization During Hot-Working in an Advanced TiAl Alloy

    Schmölzer, T., Liss, K-D., Rester, M., Yan, K., Stark, A., Reid, M., Peel, M. & Clemens, H., 2011, In : Practical metallography = Praktische Metallographie. 48, p. 632-642

    Research output: Contribution to journalArticleResearchpeer-review

  13. Published
  14. Published

    Failure of Hot-Dip Galvanized Steel Parts

    Panzenböck, M., Mendez Martin, F., Rashkova, B., Schütz, P. & Kaiser, R., Oct 2016, In : Practical metallography = Praktische Metallographie. p. 641-651 11 p.

    Research output: Contribution to journalArticleResearchpeer-review

  15. Published

    Friction Welding of Intermetallic Titanium Aluminides: Microstructural Evolution and Mechanical Properties

    Mayer, S., Appel, L., Cramer, H. & Clemens, H., 2011, In : Practical metallography = Praktische Metallographie. 48, p. 572-581

    Research output: Contribution to journalArticleResearchpeer-review

  16. Published

    Gefügeausbildung in der ersten Lage von austenitischen Plattierungen auf un- und niedrig-legierten Stählen

    Posch, G., Panzenböck, M., Tösch, J. & Pölzl, S., 2008, In : Practical metallography = Praktische Metallographie. p. 311-323

    Research output: Contribution to journalArticleResearchpeer-review

  17. Published

    Gefügecharakterisierung eines Warmarbeitsstahls mit martensitisch-bainitschem Mischgefüge

    Mayer, S., Pölzl, S., Hawranek, G., Scheu, C., Leitner, H., Clemens, H. & Siller, I., 2007, In : Practical metallography = Praktische Metallographie. p. 182-192

    Research output: Contribution to journalArticleResearchpeer-review

  18. Published

    Gefügeänderungen während der inneren Oxidation einer Ag-Sn-Legierung

    Bruncko, M., Kneißl, A. & Anzel, I., 2007, In : Practical metallography = Praktische Metallographie. 44, p. 464-475

    Research output: Contribution to journalArticleResearchpeer-review

  19. Published

    Heat Treatment-Induced Improvement of the Thermal Shock Resistance of Si3N4 Tools for Metallurgical Applications

    Harrer, W., Danzer, R. & Berroth, K., 2015, In : Practical metallography = Praktische Metallographie. 52, 4, p. 191-204 14 p.

    Research output: Contribution to journalArticleResearchpeer-review

  20. Published

    Herstellung lamellarer Gefügetypen in intermetallischen TiAl-Legierungen und deren Charakterisierung

    Schnitzer, R., Chladil, H., Scheu, C., Clemens, H., Bystrzanowski, S., Bartels, A. & Kremmer, S., 2007, In : Practical metallography = Praktische Metallographie. 44, p. 430-443

    Research output: Contribution to journalArticleResearchpeer-review

  21. Published
  22. Published

    Hochtemperaturkorrosion des Stahls X15CrNiSi25-21 (1.4841) in einer Mischgasatmosphäre-Probenpräparation und Schädigungsmechanismus

    Schmid, A., Mori, G., Hönig, S., Strobl, S. & Haubner, R., 1 Jan 2019, In : Praktische Metallographie/Practical Metallography. 56, 7, p. 457-468 12 p.

    Research output: Contribution to journalArticleResearchpeer-review

  23. Published
  24. Published
  25. Published

    Influence of Surface Quality on the Biaxial Strength of silicon Nitride Specimens

    Harrer, W., Danzer, R. & Supancic, P., 2011, In : Practical metallography = Praktische Metallographie. 48, p. 515-526

    Research output: Contribution to journalArticleResearchpeer-review

  26. Published

    Influence of Surface Quality on the biaxial Strength of Silicon Nitride

    Harrer, W., Danzer, R. & Supancic, P., 2010, In : Practical metallography = Praktische Metallographie. 42, p. 141-146

    Research output: Contribution to journalArticleResearchpeer-review

  27. Published

    Influence of aluminium nitride on the high-temperature ductility of continuous cast slabs

    Winkelhofer, F., Parteder, E., Clemens, H., Leitner, H., Spiradek-Hahn, K. & Kozeschnik, E., 2008, In : Practical metallography = Praktische Metallographie. 45, p. 159-172

    Research output: Contribution to journalArticleResearchpeer-review

  28. Published

    Influence of discontinuous precipitation on the creep behavior of a ß-solidified γ-TiAl based alloy

    Kastenhuber, M., Lehner, A., Hawranek, G., Krajnc, B., Clemens, H. & Mayer, S., 2015, In : Practical metallography = Praktische Metallographie. 52, 5, p. 249-258

    Research output: Contribution to journalArticleResearchpeer-review

  29. Published

    Influence of heat treatments on the microstructure of a multi-phase titanium aluminide alloy

    Schwaighofer, E., Schloffer, M., Schmölzer, T., Mayer, S., Lindemann, J., Guether, V., Klose, J. & Clemens, H., 2012, In : Practical metallography = Praktische Metallographie. 49, p. 124-137

    Research output: Contribution to journalArticleResearchpeer-review

  30. Published

    Influence of the sample preparation technique on the μ phase fraction analysis in a Fe-25Co-15Mo alloy by means of XRD

    Turk, C., Clemens, H., Primig, S., Kellezi, G. & Leitner, H., 2015, In : Practical metallography = Praktische Metallographie. 52, 6, p. 323-333

    Research output: Contribution to journalArticleResearchpeer-review

  31. Published
  32. Published
  33. Published
  34. Published

    Investigation of the self tempering effect of martensite by means of atom probe tomography

    Sackl, S. C., Clemens, H. & Primig, S., 2015, In : Practical metallography = Praktische Metallographie. 52, 7, p. 374-383

    Research output: Contribution to journalArticleResearchpeer-review

  35. Published

    Metallographische Präparation von dotiertem Tantal für licht- und rasterelektronenmikroskopische Mikrostrukturuntersuchungen

    Mayer, S., Pölzl, S., Hawranek, G., Bischof, M., Scheu, C., Clemens, H. & Knabl, W., 2006, In : Practical metallography = Praktische Metallographie. 43, p. 614-628

    Research output: Contribution to journalArticleResearchpeer-review

  36. Published
  37. Published
  38. Published

    Microstructural Changes during Vacuum Carburizing of Steels

    Bruncko, M., Anzel, I. & Kneißl, A., 2011, In : Practical metallography = Praktische Metallographie. 48, p. 398-407

    Research output: Contribution to journalArticleResearchpeer-review

  39. Published

    Microstructural Characterization of Martensitic All-Weld Metal Samples

    Haslberger, P., Holly, S., Ernst, W. & Schnitzer, R., 2017, In : Practical metallography = Praktische Metallographie. 54, p. 513-532

    Research output: Contribution to journalArticleResearchpeer-review

  40. Published
  41. Published

    Microstructural characterization of molybdenum grain boundaries by micropillar compression testing and atom probe tomography

    Jakob, S., Lorich, A., Eidenberger-Schober, M., Knabl, W., Clemens, H. & Maier-Kiener, V., 2019, In : Practical metallography = Praktische Metallographie. 2019, 56, p. 776-786

    Research output: Contribution to journalArticleResearchpeer-review

  42. Published

    Microstructural characterization of ultra-high strength martensitic steels

    Esterl, R., Sonnleitner, M., Stadler, M., Wölger, G. & Schnitzer, R., 2018, In : Practical metallography = Praktische Metallographie. p. 203-222

    Research output: Contribution to journalArticleResearchpeer-review

  43. Published

    Microstructural investigation of melt-spun NiTi based ribbons

    Mehrabi, K., Bruncko, M. & Kneißl, A., 2012, In : Practical metallography = Praktische Metallographie. 49, p. 544-555

    Research output: Contribution to journalArticleResearchpeer-review

  44. Published

    Microstructure characterization of intermetallic γ-TiAl based alloys after high-temperature deformation

    Godor, F., Werner, R., Lindemann, J., Clemens, H. & Mayer, S., 2015, In : Practical metallography = Praktische Metallographie. 52, 5, p. 239-248

    Research output: Contribution to journalArticleResearchpeer-review

  45. Published

    Mikrostruktur einer C/C-CU Verbindung für Erste-Wand-Komponenten des ITER

    Eidenberger, E., Scheu, C., Hawranek, G., Leitner, H., Clemens, H., Pippan, R. & Schedler, B., 2007, In : Practical metallography = Praktische Metallographie. 44, p. 403-412

    Research output: Contribution to journalArticleResearchpeer-review

  46. Published

    Mikrostrukturelle Charakterisierung von PH 13-8 Mo Maraging-Stählen

    Schnitzer, R., Hochfellner, R., Nöhrer, M., Schober, M., Clemens, H., Zinner, S. & Leitner, H., 2009, In : Practical metallography = Praktische Metallographie. p. 521-536

    Research output: Contribution to journalArticleResearchpeer-review

  47. Published

    Mikrostrukturelle Merkmale von martensitischen Chromstählen und deren Einfluss auf die Kriechfestigkeit

    Maile, K., Zies, G., Scheck, R., Kuppler, D., Ruoff, H., Rauch, M., Klenk, A. & Scheu, C., 2006, In : Practical metallography = Praktische Metallographie. 43, p. 349-363

    Research output: Contribution to journalArticleResearchpeer-review

  48. Published

    Moderne Methoden zur mikroskopischen Charakterisierung von ZnO Varistor-Korngrenzen

    Raidl, N., Sartory, B., Supancic, P. & Danzer, R., 1 Apr 2018, In : Praktische Metallographie/Practical Metallography. 55, 4, p. 192-202 11 p.

    Research output: Contribution to journalArticleResearchpeer-review

  49. Published
  50. Published

    Nichtmetallische Einschlüsse in Edelstählen: Korrelation von unterschiedlichen Prüfmethoden

    Tazreiter, A., Schützenhöfer, W., Beck, R. & Schumacher, P., 2014, In : Practical metallography = Praktische Metallographie. Sonderband, p. 221-226

    Research output: Contribution to journalArticleResearch

Previous 1 2 Next