Practical metallography = Praktische Metallographie, 0032-678X

Journal

ISSNs0032-678X

Research output

  1. 2019
  2. Published

    Schadensanalyse an einer Kompaktierwalze aus Siliziumnitrid

    Harrer, W., Morrell, R. & Danzer, R., 1 Apr 2019, In : Praktische Metallographie/Practical Metallography. 56.2019, 4, p. 262-275 14 p.

    Research output: Contribution to journalArticleResearchpeer-review

  3. Published
  4. Published

    Hochtemperaturkorrosion des Stahls X15CrNiSi25-21 (1.4841) in einer Mischgasatmosphäre-Probenpräparation und Schädigungsmechanismus

    Schmid, A., Mori, G., Hönig, S., Strobl, S. & Haubner, R., 1 Jan 2019, In : Praktische Metallographie/Practical Metallography. 56, 7, p. 457-468 12 p.

    Research output: Contribution to journalArticleResearchpeer-review

  5. Published
  6. Published
  7. Published
  8. 2018
  9. Published
  10. Published

    Moderne Methoden zur mikroskopischen Charakterisierung von ZnO Varistor-Korngrenzen

    Raidl, N., Sartory, B., Supancic, P. & Danzer, R., 1 Apr 2018, In : Praktische Metallographie/Practical Metallography. 55, 4, p. 192-202 11 p.

    Research output: Contribution to journalArticleResearchpeer-review

  11. Published

    Ungewöhnliche Rissbildung an einem Autoklaven bei Versuchen zum thermischen Cracken von anthropogenen Ressourcen

    Schmid, A., Mori, G. K., Strobl, S. & Haubner, R., 18 Jan 2018, In : Practical metallography = Praktische Metallographie. Vol. 55, 4, p. 244-253

    Research output: Contribution to journalArticleResearchpeer-review

  12. Published

    Aspects of Powder Characterization for Additive Manufacturing

    Wimler, D., Kardos, S., Lindemann, J., Clemens, H. & Mayer, S., 2018, In : Practical metallography = Praktische Metallographie. 55.2018, 9, p. 620-636 17 p.

    Research output: Contribution to journalArticleResearchpeer-review

  13. Published
  14. Published
  15. Published

    Microstructural characterization of ultra-high strength martensitic steels

    Esterl, R., Sonnleitner, M., Stadler, M., Wölger, G. & Schnitzer, R., 2018, In : Practical metallography = Praktische Metallographie. p. 203-222

    Research output: Contribution to journalArticleResearchpeer-review

  16. Published
  17. 2017
  18. Published

    Damage-Sequences of Mountain Anchors

    Freitag, C. & Panzenböck, M., Jan 2017, In : Practical metallography = Praktische Metallographie. p. 6-18 13 p.

    Research output: Contribution to journalArticleResearchpeer-review

  19. Published

    Microstructural Characterization of Martensitic All-Weld Metal Samples

    Haslberger, P., Holly, S., Ernst, W. & Schnitzer, R., 2017, In : Practical metallography = Praktische Metallographie. 54, p. 513-532

    Research output: Contribution to journalArticleResearchpeer-review

  20. 2016
  21. Published

    Failure of Hot-Dip Galvanized Steel Parts

    Panzenböck, M., Mendez Martin, F., Rashkova, B., Schütz, P. & Kaiser, R., Oct 2016, In : Practical metallography = Praktische Metallographie. p. 641-651 11 p.

    Research output: Contribution to journalArticleResearchpeer-review

  22. Published

    Phase Characterization of a Biocompatible Co-Cr-W Alloy Via Correlative Microscopy

    Weißensteiner, I., Voigt, P., Maier-Kiener, V. & Clemens, H., 2016, In : Practical metallography = Praktische Metallographie. 53, 7, p. 450-461 12 p.

    Research output: Contribution to journalArticleResearchpeer-review

  23. Published
  24. 2015
  25. Published

    Heat Treatment-Induced Improvement of the Thermal Shock Resistance of Si3N4 Tools for Metallurgical Applications

    Harrer, W., Danzer, R. & Berroth, K., 2015, In : Practical metallography = Praktische Metallographie. 52, 4, p. 191-204 14 p.

    Research output: Contribution to journalArticleResearchpeer-review

  26. Published
  27. Published

    Influence of discontinuous precipitation on the creep behavior of a ß-solidified γ-TiAl based alloy

    Kastenhuber, M., Lehner, A., Hawranek, G., Krajnc, B., Clemens, H. & Mayer, S., 2015, In : Practical metallography = Praktische Metallographie. 52, 5, p. 249-258

    Research output: Contribution to journalArticleResearchpeer-review

  28. Published

    Influence of the sample preparation technique on the μ phase fraction analysis in a Fe-25Co-15Mo alloy by means of XRD

    Turk, C., Clemens, H., Primig, S., Kellezi, G. & Leitner, H., 2015, In : Practical metallography = Praktische Metallographie. 52, 6, p. 323-333

    Research output: Contribution to journalArticleResearchpeer-review

  29. Published
  30. Published

    Investigation of the self tempering effect of martensite by means of atom probe tomography

    Sackl, S. C., Clemens, H. & Primig, S., 2015, In : Practical metallography = Praktische Metallographie. 52, 7, p. 374-383

    Research output: Contribution to journalArticleResearchpeer-review

  31. Published

    Microstructure characterization of intermetallic γ-TiAl based alloys after high-temperature deformation

    Godor, F., Werner, R., Lindemann, J., Clemens, H. & Mayer, S., 2015, In : Practical metallography = Praktische Metallographie. 52, 5, p. 239-248

    Research output: Contribution to journalArticleResearchpeer-review

  32. Published

    Novel methods for the site specific preparation of micromechanical structures

    Wurster, S., Treml, R., Fritz, R., Kapp, M. W., Langs, E., Alfreider, M., Ruhs, C., Imrich, P. J., Felber, G. & Kiener, D., 2015, In : Practical metallography = Praktische Metallographie. 52, 3, p. 131-146 16 p.

    Research output: Contribution to journalArticleResearchpeer-review

  33. Published

    Preparation of carbide-free bainitic steels for EBSD investigations

    Hofer, C., Clemens, H. & Primig, S., 2015, In : Practical metallography = Praktische Metallographie. 52, 7, p. 384-395

    Research output: Contribution to journalArticleResearchpeer-review

  34. Published

    Standardized Iron Ore Characterization Methodology for Metallurgy

    Kolb, F., Mali, H., Pichler, A. & Schenk, J., 2015, In : Practical metallography = Praktische Metallographie. 52, p. 5-20

    Research output: Contribution to journalArticleResearchpeer-review

  35. Published
  36. 2014
  37. Published
  38. 2012
  39. Published

    Influence of heat treatments on the microstructure of a multi-phase titanium aluminide alloy

    Schwaighofer, E., Schloffer, M., Schmölzer, T., Mayer, S., Lindemann, J., Guether, V., Klose, J. & Clemens, H., 2012, In : Practical metallography = Praktische Metallographie. 49, p. 124-137

    Research output: Contribution to journalArticleResearchpeer-review

  40. Published

    Microstructural investigation of melt-spun NiTi based ribbons

    Mehrabi, K., Bruncko, M. & Kneißl, A., 2012, In : Practical metallography = Praktische Metallographie. 49, p. 544-555

    Research output: Contribution to journalArticleResearchpeer-review

  41. Published

    Sample Preparation by Metallography and Focused Ion Beam for Nanomechanical Testing

    Moser, G., Felber, H., Rashkova, B., Imrich, P. J., Kirchlechner, C., Grosinger, W., Motz, C., Dehm, G. & Kiener, D., 2012, In : Practical metallography = Praktische Metallographie. 49, p. 343-355

    Research output: Contribution to journalArticleResearchpeer-review

  42. 2011
  43. Published

    A Mechanical Method for Preparing TEM Samples from Brittle Films on Compliant Substrates

    Taylor, A. A., Cordill, M., Moser, G. & Dehm, G., 2011, In : Practical metallography = Praktische Metallographie. 48, p. 408-413

    Research output: Contribution to journalArticleResearchpeer-review

  44. Published

    Automated SEM/EDX Particle Analysis to Determinate Non-Metallic Inclusions in Steel Samples

    Reischl, M., Frank, G., Martinez, C., Aigner, S., Lederhaas, B. & Michelic, S., 2011, In : Practical metallography = Praktische Metallographie. 12, p. 643-659

    Research output: Contribution to journalArticleResearchpeer-review

  45. Published

    Defects and Fracture Statistics in Low-Pressure Injection Moulded Alumina Components

    Lube, T. & Kraleva, I., 2011, In : Practical metallography = Praktische Metallographie. 48, p. 488-495

    Research output: Contribution to journalArticleResearchpeer-review

  46. Published

    Dynamic Recovery and Recrystallization During Hot-Working in an Advanced TiAl Alloy

    Schmölzer, T., Liss, K-D., Rester, M., Yan, K., Stark, A., Reid, M., Peel, M. & Clemens, H., 2011, In : Practical metallography = Praktische Metallographie. 48, p. 632-642

    Research output: Contribution to journalArticleResearchpeer-review

  47. Published

    Friction Welding of Intermetallic Titanium Aluminides: Microstructural Evolution and Mechanical Properties

    Mayer, S., Appel, L., Cramer, H. & Clemens, H., 2011, In : Practical metallography = Praktische Metallographie. 48, p. 572-581

    Research output: Contribution to journalArticleResearchpeer-review

  48. Published

    Influence of Surface Quality on the Biaxial Strength of silicon Nitride Specimens

    Harrer, W., Danzer, R. & Supancic, P., 2011, In : Practical metallography = Praktische Metallographie. 48, p. 515-526

    Research output: Contribution to journalArticleResearchpeer-review

  49. Published
  50. Published

    Microstructural Changes during Vacuum Carburizing of Steels

    Bruncko, M., Anzel, I. & Kneißl, A., 2011, In : Practical metallography = Praktische Metallographie. 48, p. 398-407

    Research output: Contribution to journalArticleResearchpeer-review

  51. Published

    SEM and TEM Investigations of Recovery and Recrystallization in Technically Pure Molybdenum

    Primig, S., Leitner, H., Lorich, A., Knabl, W., Clemens, H. & Stickler, R., 2011, In : Practical metallography = Praktische Metallographie. p. 344-355

    Research output: Contribution to journalArticleResearchpeer-review

  52. Published
  53. 2010
  54. Published

    Defects and Fracture Statistics in Low-pressure Injection Moulded Alumina Components

    Lube, T., Kraleva, I. & Veskovic, S., 2010, In : Practical metallography = Praktische Metallographie. 42, p. 159-164

    Research output: Contribution to journalArticleResearchpeer-review

  55. Published

    Influence of Surface Quality on the biaxial Strength of Silicon Nitride

    Harrer, W., Danzer, R. & Supancic, P., 2010, In : Practical metallography = Praktische Metallographie. 42, p. 141-146

    Research output: Contribution to journalArticleResearchpeer-review

  56. 2009
  57. Published

    Mikrostrukturelle Charakterisierung von PH 13-8 Mo Maraging-Stählen

    Schnitzer, R., Hochfellner, R., Nöhrer, M., Schober, M., Clemens, H., Zinner, S. & Leitner, H., 2009, In : Practical metallography = Praktische Metallographie. p. 521-536

    Research output: Contribution to journalArticleResearchpeer-review

  58. Published

    Thermal Stability of a Rapidly Solidified Cu-Zr

    Anzel, I., Kneißl, A., Rudolf, R. & Krizman, A., 2009, In : Practical metallography = Praktische Metallographie. 46, p. 657-669

    Research output: Contribution to journalArticleResearchpeer-review

  59. Published
  60. 2008
  61. Published

    Gefügeausbildung in der ersten Lage von austenitischen Plattierungen auf un- und niedrig-legierten Stählen

    Posch, G., Panzenböck, M., Tösch, J. & Pölzl, S., 2008, In : Practical metallography = Praktische Metallographie. p. 311-323

    Research output: Contribution to journalArticleResearchpeer-review

  62. Published
  63. Published

    Influence of aluminium nitride on the high-temperature ductility of continuous cast slabs

    Winkelhofer, F., Parteder, E., Clemens, H., Leitner, H., Spiradek-Hahn, K. & Kozeschnik, E., 2008, In : Practical metallography = Praktische Metallographie. 45, p. 159-172

    Research output: Contribution to journalArticleResearchpeer-review

  64. 2007
  65. Published

    Gefügecharakterisierung eines Warmarbeitsstahls mit martensitisch-bainitschem Mischgefüge

    Mayer, S., Pölzl, S., Hawranek, G., Scheu, C., Leitner, H., Clemens, H. & Siller, I., 2007, In : Practical metallography = Praktische Metallographie. p. 182-192

    Research output: Contribution to journalArticleResearchpeer-review

  66. Published

    Gefügeänderungen während der inneren Oxidation einer Ag-Sn-Legierung

    Bruncko, M., Kneißl, A. & Anzel, I., 2007, In : Practical metallography = Praktische Metallographie. 44, p. 464-475

    Research output: Contribution to journalArticleResearchpeer-review

  67. Published

    Herstellung lamellarer Gefügetypen in intermetallischen TiAl-Legierungen und deren Charakterisierung

    Schnitzer, R., Chladil, H., Scheu, C., Clemens, H., Bystrzanowski, S., Bartels, A. & Kremmer, S., 2007, In : Practical metallography = Praktische Metallographie. 44, p. 430-443

    Research output: Contribution to journalArticleResearchpeer-review

  68. Published

    Mikrostruktur einer C/C-CU Verbindung für Erste-Wand-Komponenten des ITER

    Eidenberger, E., Scheu, C., Hawranek, G., Leitner, H., Clemens, H., Pippan, R. & Schedler, B., 2007, In : Practical metallography = Praktische Metallographie. 44, p. 403-412

    Research output: Contribution to journalArticleResearchpeer-review

  69. 2006
  70. Published
  71. Published

    Metallographische Präparation von dotiertem Tantal für licht- und rasterelektronenmikroskopische Mikrostrukturuntersuchungen

    Mayer, S., Pölzl, S., Hawranek, G., Bischof, M., Scheu, C., Clemens, H. & Knabl, W., 2006, In : Practical metallography = Praktische Metallographie. 43, p. 614-628

    Research output: Contribution to journalArticleResearchpeer-review

  72. Published

    Mikrostrukturelle Merkmale von martensitischen Chromstählen und deren Einfluss auf die Kriechfestigkeit

    Maile, K., Zies, G., Scheck, R., Kuppler, D., Ruoff, H., Rauch, M., Klenk, A. & Scheu, C., 2006, In : Practical metallography = Praktische Metallographie. 43, p. 349-363

    Research output: Contribution to journalArticleResearchpeer-review

  73. Published

    Ätztechniken für die Phasencharakterisierung von niedriglegierten Dual-Phasen- und TRIP-Stählen

    Angeli, J., Füreder, E., Panholzer, M. & Kneißl, A., 2006, In : Practical metallography = Praktische Metallographie. 43, p. 489-504

    Research output: Contribution to journalArticleResearchpeer-review

  74. 2005
  75. Published

    Schäden an Kupferrohren einer Fußbodenheizung

    Panzenböck, M., 2005, In : Practical metallography = Praktische Metallographie. 42, p. 257-264

    Research output: Contribution to journalArticleResearchpeer-review

  76. Published

    Thin Ribbons of CuAlNi Shape Memory Alloys Manufactured by Melt-Spinning

    Unterweger, E., Lojen, G., Kneißl, A. & Anzel, I., 2005, In : Practical metallography = Praktische Metallographie. 42, p. 435-444

    Research output: Contribution to journalArticleResearchpeer-review

  77. 2004
  78. Published
  79. Published

    Thermal stability of sputtered nanocrystalline hard coatings

    Willmann, H., Mayrhofer, P. H., Beschliesser, M. & Mitterer, C., 2004, In : Practical metallography = Praktische Metallographie. 41, p. 397-408

    Research output: Contribution to journalArticleResearchpeer-review