Practical metallography = Praktische Metallographie, 0032-678X

Journal

ISSNs0032-678X
1 - 20 out of 65Page size: 20
Sort by: Type

Research output

  1. Article › Research › Not peer-reviewed
  2. Published

    Beryllium – A challenge for preparation and mechanical characterization

    Siller, M., Kappacher, J., Rolli, R., Clemens, H. & Maier-Kiener, V., 2019, In : Practical metallography = Praktische Metallographie. p. 624-33

    Research output: Contribution to journal › Article › Research

  3. Published

    Combination of Nanoindentation and Microscopy for the Examination of Aluminum Alloys in Coarse- and Ultrafine-Grained Condition

    Kappacher, J., Leitner, A., Clemens, H. & Maier-Kiener, V., 9 Jan 2019, In : Practical metallography = Praktische Metallographie. 56.2019, 7, p. 432-442 11 p.

    Research output: Contribution to journal › Article › Research

  4. Published

    Metallography of Intermetallic Titanium Aluminides – the ( Additive ) Manufacturing Makes the Difference

    Mayer, S., Schimbäck, D., Wartbichler, R., Wimler, D. & Clemens, H., 2019, In : Practical metallography = Praktische Metallographie. p. 567-584

    Research output: Contribution to journal › Article › Research

  5. Article › Research › Peer-reviewed
  6. Published

    A Mechanical Method for Preparing TEM Samples from Brittle Films on Compliant Substrates

    Taylor, A. A., Cordill, M., Moser, G. & Dehm, G., 2011, In : Practical metallography = Praktische Metallographie. 48, p. 408-413

    Research output: Contribution to journal › Article › Research › peer-review

  7. Published

    Anwendung eines stereoskopischen Verfahrens zur fraktografischen Charakterisierung von grobkeramischen Baustoffen

    Manhart, C. & Harmuth, H., 2006, In : Practical metallography = Praktische Metallographie.

    Research output: Contribution to journal › Article › Research › peer-review

  8. Published

    Aspects of Powder Characterization for Additive Manufacturing

    Wimler, D., Kardos, S., Lindemann, J., Clemens, H. & Mayer, S., 2018, In : Practical metallography = Praktische Metallographie. 55.2018, 9, p. 620-636 17 p.

    Research output: Contribution to journal › Article › Research › peer-review

  9. Published

    Ausgewählte Methoden der quantitativen Phasenanalyse einer additiv gefertigten TNM-Titanaluminid-Legierung

    Wartbichler, R., Bürstmayr, R., Clemens, H. & Mayer, S., 2019, In : Practical metallography = Praktische Metallographie. 56.2019, 4, p. 220-229 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  10. Published

    Automated SEM/EDX Particle Analysis to Determinate Non-Metallic Inclusions in Steel Samples

    Reischl, M., Frank, G., Martinez, C., Aigner, S., Lederhaas, B. & Michelic, S., 2011, In : Practical metallography = Praktische Metallographie. 12, p. 643-659

    Research output: Contribution to journal › Article › Research › peer-review

  11. Published

    Characterization of the crack initiation and crack propagation behavior of welded steels by means of the replica technique

    Panzenböck, M., Horn, A., Posch, G. & Clemens, H., 2014, In : Practical metallography = Praktische Metallographie. 51, p. 557-567

    Research output: Contribution to journal › Article › Research › peer-review

  12. Published

    Damage-Sequences of Mountain Anchors

    Freitag, C. & Panzenböck, M., Jan 2017, In : Practical metallography = Praktische Metallographie. p. 6-18 13 p.

    Research output: Contribution to journal › Article › Research › peer-review

  13. Published

    Defects and Fracture Statistics in Low-Pressure Injection Moulded Alumina Components

    Lube, T. & Kraleva, I., 2011, In : Practical metallography = Praktische Metallographie. 48, p. 488-495

    Research output: Contribution to journal › Article › Research › peer-review

  14. Published

    Defects and Fracture Statistics in Low-pressure Injection Moulded Alumina Components

    Lube, T., Kraleva, I. & Veskovic, S., 2010, In : Practical metallography = Praktische Metallographie. 42, p. 159-164

    Research output: Contribution to journal › Article › Research › peer-review

  15. Published

    Dynamic Recovery and Recrystallization During Hot-Working in an Advanced TiAl Alloy

    Schmölzer, T., Liss, K-D., Rester, M., Yan, K., Stark, A., Reid, M., Peel, M. & Clemens, H., 2011, In : Practical metallography = Praktische Metallographie. 48, p. 632-642

    Research output: Contribution to journal › Article › Research › peer-review

  16. Published

    Failure of Hot-Dip Galvanized Steel Parts

    Panzenböck, M., Mendez Martin, F., Rashkova, B., Schütz, P. & Kaiser, R., Oct 2016, In : Practical metallography = Praktische Metallographie. p. 641-651 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  17. Published

    Friction Welding of Intermetallic Titanium Aluminides: Microstructural Evolution and Mechanical Properties

    Mayer, S., Appel, L., Cramer, H. & Clemens, H., 2011, In : Practical metallography = Praktische Metallographie. 48, p. 572-581

    Research output: Contribution to journal › Article › Research › peer-review

  18. Published

    Gefügeausbildung in der ersten Lage von austenitischen Plattierungen auf un- und niedrig-legierten Stählen

    Posch, G., Panzenböck, M., Tösch, J. & Pölzl, S., 2008, In : Practical metallography = Praktische Metallographie. p. 311-323

    Research output: Contribution to journal › Article › Research › peer-review

  19. Published

    Gefügecharakterisierung eines Warmarbeitsstahls mit martensitisch-bainitschem Mischgefüge

    Mayer, S., Pölzl, S., Hawranek, G., Scheu, C., Leitner, H., Clemens, H. & Siller, I., 2007, In : Practical metallography = Praktische Metallographie. p. 182-192

    Research output: Contribution to journal › Article › Research › peer-review

  20. Published

    Gefügeänderungen während der inneren Oxidation einer Ag-Sn-Legierung

    Bruncko, M., Kneißl, A. & Anzel, I., 2007, In : Practical metallography = Praktische Metallographie. 44, p. 464-475

    Research output: Contribution to journal › Article › Research › peer-review

  21. Published

    Heat Treatment-Induced Improvement of the Thermal Shock Resistance of Si3N4 Tools for Metallurgical Applications

    Harrer, W., Danzer, R. & Berroth, K., 2015, In : Practical metallography = Praktische Metallographie. 52, 4, p. 191-204 14 p.

    Research output: Contribution to journal › Article › Research › peer-review

  22. Published

    Herstellung lamellarer Gefügetypen in intermetallischen TiAl-Legierungen und deren Charakterisierung

    Schnitzer, R., Chladil, H., Scheu, C., Clemens, H., Bystrzanowski, S., Bartels, A. & Kremmer, S., 2007, In : Practical metallography = Praktische Metallographie. 44, p. 430-443

    Research output: Contribution to journal › Article › Research › peer-review

Previous 1 2 3 4 Next
View graph of relations