Scripta materialia, 1359-6462

Journal

ISSNs1359-6462
Additional searchable ISSN (Electronic)1359-6462

Research output

  1. 2020
  2. Published

    Microstructural characterization of medium entropy alloy thin films

    Chawake, N., Zalesak, J., Gammer, C., Franz, R., Cordill, M. J., Kim, J. T. & Eckert, J., 2020, In : Scripta materialia. p. 22-26

    Research output: Contribution to journalArticleResearchpeer-review

  3. 2019
  4. Published

    An investigation on diffusivity while achieving a cylindrical aluminide coating on metals using simultaneous spark plasma sintering of powders

    Chawake, N., Ghosh, P., Eckert, J. & Kottada, R. S., 1 Sep 2019, In : Scripta Materialia. 170.2019, September, p. 156-160 5 p.

    Research output: Contribution to journalArticleResearchpeer-review

  5. Published

    Processing-controlled suppression of Lüders elongation in AlMgMn alloys

    Ebenberger, P., Uggowitzer, P. J., Kirnstötter, S., Gerold, B., Zaefferer, S. & Pogatscher, S., 1 Jun 2019, In : Scripta Materialia. 166.2019, June, p. 64-67 4 p.

    Research output: Contribution to journalArticleResearchpeer-review

  6. Published

    Correlating structural and mechanical properties of AlN / TiN superlattice films

    Koutná, N., Rehák, P., Chen, Z., Bartosik, M., Fallmann, M., Cerny, M., Zhang, Z., Friák, M., Šob, M., Mayrhofer, P. H. & Holec, D., 1 May 2019, In : Scripta materialia. 165.2019, May, p. 159-163 5 p.

    Research output: Contribution to journalArticleResearchpeer-review

  7. Published

    Compressive and tensile bending of sputter deposited Al/Mo bilayers

    Kreiml, P., Rausch, M., Terziyska, V., Winkler, J., Mitterer, C. & Cordill, M., 15 Mar 2019, In : Scripta materialia. 162.2019, March, p. 367-371 5 p.

    Research output: Contribution to journalArticleResearchpeer-review

  8. Published

    Estimation of diffusivity from densification data obtained during spark plasma sintering

    Chawake, N., Ghosh, P., Raman, L., Srivastav, A. K., Paul, T., Harimkar, S. P., Eckert, J. & Kottada, R. S., 1 Mar 2019, In : Scripta Materialia. 161.2019, March, p. 36-39 4 p.

    Research output: Contribution to journalArticleResearchpeer-review

  9. Published

    Influence of misfit stress relaxation by power-law creep and plasticity on kinetics of coarsening of precipitates

    Svoboda, J., Yao, S., Kozeschnik, E. & Fischer, F-D., 2019, In : Scripta materialia. 2019, Vol.168, p. 81-85

    Research output: Contribution to journalArticleResearchpeer-review

  10. Published

    Local Approach for Coarsening of Precipitates

    Svoboda, J., Shan, Y. V., Zickler, G. A., Kozeschnik, E. & Fischer, F-D., 2019, In : Scripta materialia. 178, p. 232-235

    Research output: Contribution to journalArticleResearchpeer-review

  11. 2018
  12. Published

    Grain boundary segregation engineering in as-sintered molybdenum for improved ductility

    Leitner, K., Lutz, D., Knabl, W., Eidenberger-Schober, M., Huber, K., Lorich, A., Clemens, H. & Maier-Kiener, V., 20 Jul 2018, In : Scripta materialia. 156.2018, November, p. 60-63 4 p.

    Research output: Contribution to journalArticleResearchpeer-review

  13. Published

    Influence of carbon deficiency on phase formation and thermal stability of super-hard TaCy thin films

    Riedl, H., Glechner, T., Wojcik, T., Koutná, N., Kolozsvári, S., Paneta, V., Holec, D., Primetzhofer, D. & Mayrhofer, P. H., 9 Mar 2018, In : Scripta materialia. 149.2018, May, p. 150-154 5 p.

    Research output: Contribution to journalArticleResearchpeer-review

  14. Published

    Influene of accounting for translational motion of grains on grain growth kinetics and size distribution

    Svoboda, J. & Fischer, F-D., 2018, In : Scripta materialia. 146, p. 225-259

    Research output: Contribution to journalArticleResearchpeer-review

  15. Published

    Kinetics of Grain Boundary Segregation in Multicomponent Systems – The Example of a Mo-C-B-O System

    Scheiber, D., Romaner, L., Fischer, F-D. & Svoboda, J., 2018, In : Scripta materialia. 150, p. 110-114 5 p.

    Research output: Contribution to journalArticleResearchpeer-review

  16. Published
  17. Published

    Two-stage cracking of metallic bi-layers on polymer substrates under tension

    Putz, B., May-Miller, C., Matl, V., Völker, B., Többens, D., Semprimoschnig, C. & Cordill, M., 2018, In : Scripta Materialia. 145, p. 5-8

    Research output: Contribution to journalArticleResearchpeer-review

  18. 2017
  19. Published

    Gradient residual strain and stress distributions in a high pressure torsion deformed iron disk revealed by high energy X-ray diffraction

    Todt, J., Keckes, J., Winter, G., Staron, P. & Hohenwarter, A., 27 Nov 2017, In : Scripta Materialia. 146.2018, 15 March, p. 178-181 4 p.

    Research output: Contribution to journalArticleResearchpeer-review

  20. Published

    Simultaneous enhancement of strength and fatigue crack growth behavior of nanocrystalline steels by annealing

    Leitner, T., Pillmeier, S., Kormout, K. S., Pippan, R. & Hohenwarter, A., 1 Oct 2017, In : Scripta Materialia. 139, p. 39-43 5 p.

    Research output: Contribution to journalArticleResearchpeer-review

  21. Published

    Micropatterning kinetics of different glass-forming systems investigated by thermoplastic net-shaping

    Sarac, B., Bera, S., Spieckermann, F., Balakin, S., Stoica, M., Calin, M. & Eckert, J., 31 Aug 2017, In : Scripta materialia. 137, p. 127-131

    Research output: Contribution to journalArticleResearchpeer-review

  22. Published

    Crack path identification in a nanostructured pearlitic steel using atom probe tomography

    Leitner, T., Sackl, S., Völker, B., Riedl, H., Clemens, H., Pippan, R. & Hohenwarter, A., 24 Aug 2017, In : Scripta Materialia. 142.2018, 1 January, p. 66-69 4 p.

    Research output: Contribution to journalArticleResearchpeer-review

  23. Published

    Extracting flow curves from nano-sized metal layers in thin film systems

    Kozic, D., Maier-Kiener, V., Konetschnik, R., Gänser, H. P., Antretter, T., Brunner, R. & Kiener, D., 15 Mar 2017, In : Scripta materialia. 130, p. 143-147 5 p.

    Research output: Contribution to journalArticleResearchpeer-review

  24. Published

    Microstructure, mechanical behavior, and wear properties of FeCrMoVC steel prepared by selective laser melting and casting

    Sander, J., Hufenbach, J., Giebeler, L., Bleckmann, M., Eckert, J. & Kühn, U., 1 Jan 2017, In : Scripta materialia. 126, p. 41-44 4 p.

    Research output: Contribution to journalArticleResearchpeer-review

  25. Published

    The driving force governing room temperature grain coarsening in thin gold films

    Glushko, O. & Cordill, M., 2017, In : Scripta Materialia. 130, p. 42-45

    Research output: Contribution to journalArticleResearchpeer-review

  26. Published

    Thermal expansion of Ti-Al-N and Cr-Al-N coatings

    Bartosik, M., Holec, D., Apel, D., Klaus, M., Genzel, C., Keckes, J., Arndt, M., Polcik, P., Koller, C. & Mayrhofer, P. H., 2017, In : Scripta materialia. 127, p. 182-185 4 p.

    Research output: Contribution to journalArticleResearchpeer-review

  27. 2016
  28. Published

    Negentropic stabilization of metastable β-Ti in bulk metallic glass composites

    Zhang, L., Zhang, H. F., Li, W. Q., Gemming, T., Zhu, Z. W., Fu, H. M., Eckert, J. & Pauly, S., 1 Dec 2016, In : Scripta materialia. 125, p. 19-23 5 p.

    Research output: Contribution to journalArticleResearchpeer-review

  29. Published

    A Self-Consistent Model for Thermodynamics of Multicomponent Solid Solutions

    Svoboda, J. & Fischer, F. D., 2016, In : Scripta materialia. p. 154-157

    Research output: Contribution to journalArticleResearchpeer-review

  30. Published

    Cluster formation at the Si / liquid interface in Sr and Na modified Al-Si alloys

    Barrirero, J., Li, J., Engstler, M., Ghafoor, N., Schumacher, P., Odén, M. & Mücklich, F., 2016, In : Scripta materialia. 117, p. 13-16 4 p.

    Research output: Contribution to journalArticleResearchpeer-review

  31. Published

    Interface controlled microstructure evolution in nanolayered thin films

    Bartosik, M., Keckes, J., Persson, P. O. Å., Riedl, H. & Mayrhofer, P. H., 2016, In : Scripta materialia. 123, p. 13-16 4 p.

    Research output: Contribution to journalArticleResearchpeer-review

  32. Published

    Structural and mechanical properties of nitrogen-deficient cubic Cr–Mo–N and Cr–W–N systems

    Zhou, L., Klimashin, F., Holec, D. & Mayrhofer, P. H., 2016, In : Scripta materialia. 123, p. 34-37 4 p.

    Research output: Contribution to journalArticleResearchpeer-review

  33. Published

    Ultrafast artificial aging of Al-Mg-Si alloys

    Werinos, M., Antrekowitsch, H., Kozeschnik, E., Ebner, T., Löffler, J. F., Uggowitzer, P. J. & Pogatscher, S., 2016, In : Scripta materialia. 112, p. 148-151

    Research output: Contribution to journalArticleResearchpeer-review

  34. 2015
  35. Published

    Internal and external stresses: In situ TEM compression of Cu bicrystals containing a twin boundary

    Imrich, P. J., Kirchlechner, C., Kiener, D. & Dehm, G., 15 Apr 2015, In : Scripta materialia. 100, p. 94-97 4 p.

    Research output: Contribution to journalArticleResearchpeer-review

  36. Published

    Thermally activated deformation processes in body-centered cubic Cr - How microstructure influences strain-rate sensitivity

    Maier, V., Hohenwarter, A., Pippan, R. & Kiener, D., 31 Mar 2015, In : Scripta materialia. 106, p. 42-45 4 p.

    Research output: Contribution to journalArticleResearchpeer-review

  37. Published

    A New Self-Consistent Model for Thermodynamics of Binary Solutions

    Svoboda, J., Shan, Y. V. & Fischer, F. D., 2015, In : Scripta materialia. 108, p. 27 30 p.

    Research output: Contribution to journalArticleResearchpeer-review

  38. Published

    Improved electro-mechanical performance of gold films on polyimide without adhesion layers

    Putz, B., Schoeppner, R., Glushko, O., Bahr, D. F. & Cordill, M., 2015, In : Scripta materialia. p. 23-26

    Research output: Contribution to journalArticleResearchpeer-review

  39. 2014
  40. Published

    Microstructural evolution of a focused ion beam fabricated Mg nanopillar at high temperatures: Defect annihilation and sublimation

    Jeong, J., Lee, S., Kim, Y., Han, S. M., Kiener, D., Youn-Bae, K. & Oh, S. H., 2014, In : Scripta materialia. 86, p. 44-47

    Research output: Contribution to journalArticleResearchpeer-review

  41. Published

    Process-controlled suppression of natural aging in an Al-Mg-Si alloy

    Pogatscher, S., Kozeschnik, E., Antrekowitsch, H., Werinos, M., Gerstl, S. S. A., Löffler, J. F. & Uggowitzer, P. J., 2014, In : Scripta materialia. 89, p. 53-56

    Research output: Contribution to journalArticleResearchpeer-review

  42. 2013
  43. Published

    Effects of structure and interfaces on fracture toughness of CrN/AlN multilayer coatings

    Schlögl, M., Kirchlechner, C., Paulitsch, J., Keckes, J. & Mayrhofer, P., 2013, In : Scripta materialia. 68, p. 917-920

    Research output: Contribution to journalArticleResearchpeer-review

  44. Published

    Influence of the thermal route on the peak-aged microstructures in an Al-Mg-Si aluminum alloy

    Pogatscher, S., Antrekowitsch, H., Leitner, H., Sologubenko, A. S. & Uggowitzer, P. J., 2013, In : Scripta materialia. 68, p. 158-161

    Research output: Contribution to journalArticleResearchpeer-review

  45. 2012
  46. Published

    A novel approach for determining fracture toughness of hard coatings on the micrometer scale

    Riedl, A., Daniel, R., Steffenelli, M., Schöberl, T., Kolednik, O., Mitterer, C. & Keckes, J., 2012, In : Scripta materialia. 67, p. 708-711

    Research output: Contribution to journalArticleResearchpeer-review

  47. Published

    Experimental approach to assess the effect of metallization on the strength of functional ceramic components

    Bermejo Moratinos, R., Supancic, P., Aldrian, F. & Danzer, R., 2012, In : Scripta materialia. 66, p. 546-549

    Research output: Contribution to journalArticleResearchpeer-review

  48. Published

    Surface energies of AlN allotropes from first principles

    Holec, D. & Mayrhofer, P. H., 2012, In : Scripta materialia. 67, p. 760-762

    Research output: Contribution to journalArticleResearchpeer-review

  49. Published

    X-ray nanodiffraction reveals strain and microstructure evolution in nanocrystalline thin films

    Keckes, J., Bartosik, M., Daniel, R., Mitterer, C., Maier, G. A., Ecker, W., Vila-Comamala, J., David, C., Schoeder, S. & Burghammer, M., 2012, In : Scripta materialia. 67, p. 748-751

    Research output: Contribution to journalArticleResearchpeer-review

  50. 2011
  51. Published

    Dislocation plasticity of Al film on polyimide investigated by cross-sectional in situ transmission electron microscopy straining

    Oh, S. H., Rentenberger, C., Im, J., Motz, C., Kiener, D., Karnthaler, H-P. & Dehm, G., 2011, In : Scripta materialia. 65, p. 456-459

    Research output: Contribution to journalArticleResearchpeer-review

  52. Published

    Fracture toughness evaluation of ultrafine-grained nickel

    Hohenwarter, A. & Pippan, R., 2011, In : Scripta materialia. 64, p. 982-985

    Research output: Contribution to journalArticleResearchpeer-review

  53. 2010
  54. Published

    Absolute concentration of free volume-type defects in ultrafine-grained Fe prepared by high-pressure torsion

    Pippan, R., Oberdorfer, B., Lorenzoni, B., Unger, K., Sprengel, W., Zehetbauer, M. & Würschum, R., 2010, In : Scripta materialia. p. 452-455

    Research output: Contribution to journalArticleResearchpeer-review

  55. Published

    Cyclic response of copper single crystal micro-beams

    Kiener, D., Motz, C., Grosinger, W., Weygand, D. & Pippan, R., 2010, In : Scripta materialia. p. 500-503

    Research output: Contribution to journalArticleResearchpeer-review

  56. Published

    Influence of Nb on the phase stability of Ti-Al-N

    Mayrhofer, P. H., Rachbauer, R. & Holec, D., 2010, In : Scripta materialia. 63, p. 807-810

    Research output: Contribution to journalArticleResearchpeer-review

  57. Published

    Model for Coarsening of Intergranular Precipitates in Multicomponent Systems

    Svoboda, J. & Fischer, F. D., 2010, In : Scripta materialia. 62, p. 754-757

    Research output: Contribution to journalArticleResearchpeer-review

  58. Published

    Modeling of the yield strength of a stainless maraging steel

    Schnitzer, R., Zinner, S. & Leitner, H., 2010, In : Scripta materialia. p. 286-289

    Research output: Contribution to journalArticleResearchpeer-review

  59. Published

    Pressure-dependent stability of cubic and wurtzite phases within the TiN-AIN and CrN-AIN systems

    Holec, D., Rovere, F., Mayrhofer, P. H. & Barna, P. B., 2010, In : Scripta materialia. 62, p. 349-352

    Research output: Contribution to journalArticleResearchpeer-review

  60. Published

    Raman spectroscopy for the investigation of indentation-induced domain texturing in lead zirconate titanate piezoceramics

    Deluca, M., Bermejo Moratinos, R., Grünbichler, H., Presser, V., Danzer, R. & Nickel, K. G., 2010, In : Scripta materialia. 63, p. 343-346

    Research output: Contribution to journalArticleResearchpeer-review

  61. Published

    X-ray diffraction analysis of three-dimensional residual stress fields reveals origins of thermal fatigue in uncoated and coated steel

    Kirchlechner, C., Martinschitz, K. J., Daniel, R., Mitterer, C., Donges, J., Rothkirch, A., Klaus, M., Genzel, C. & Keckes, J., 2010, In : Scripta materialia. 62, p. 774-777

    Research output: Contribution to journalArticleResearchpeer-review

Previous 1 2 Next