Chair of Ferrous Metallurgy

Organisational unit: Chair

Research output

  1. Published

    Technologievergleich von Elektrostahlerzeugungsverfahren

    Aichinger, M., 2015

    Research output: ThesisMaster's ThesisResearch

  2. Published

    Reaction Mechanism and Kinetics for Scale Formation during the Reheating Process of Spring Steel

    Anghelina, D., Kienreich, R., Zamberger, S., Kozeschnik, E. & Schneider, R., 2008.

    Research output: Contribution to conferencePosterResearchpeer-review

  3. Published

    Entzunderungs- und Entkohlungsverhalten von Federnstählen (Bericht 3, 2005)

    Anghelina, D. & Krieger, W., 2005

    Research output: Book/ReportCommissioned reportTransferpeer-review

  4. Published

    Kinetics of scale formation, scale removal and surface decarburization of steels, Report 3, 2007

    Anghelina, D. & Schneider, R., 2007

    Research output: Book/ReportCommissioned reportTransferpeer-review

  5. Published

    Entzunderungs- und Entkohlungsverhalten von Federnstählen (Bericht 4, 2005)

    Anghelina, D. & Krieger, W., 2005

    Research output: Book/ReportCommissioned reportTransferpeer-review

  6. Published

    Kinetics of scale formation, scale removal and surface decarburization of steels, Report 1, 2007

    Anghelina, D. & Schneider, R., 2007

    Research output: Book/ReportCommissioned reportTransferpeer-review

  7. Published

    Entzunderungs- und Entkohlungsverhalten von Federnstählen (Bericht 6, 2006)

    Anghelina, D. & Krieger, W., 2006

    Research output: Book/ReportCommissioned reportTransferpeer-review

  8. Published

    Entzunderungs- und Entkohlungsverhalten von Federnstählen (Bericht 7, 2006)

    Anghelina, D. & Krieger, W., 2006

    Research output: Book/ReportCommissioned reportTransferpeer-review

  9. Published

    Modelling and experiments on kinetics of atmosphere purification by Argon purging in a high-temperature apparatus

    Anghelina, D., Karasangabo, A. & Bernhard, C., 2006, Proceedings of the CMFF'06. University of Technology and Economics, p. 1-3

    Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

  10. Published

    Kinetics of scale formation, scale removal and surface decarburization of steels, Report 2, 2007

    Anghelina, D. & Schneider, R., 2007

    Research output: Book/ReportCommissioned reportTransferpeer-review

  11. Published

    Nitrogen Removal from Steel by DRI Fines Injection

    Anghelina, D., Irons, G. A. & Brooks, A. G., 2005, Iron and Steel Technology Conference, Vol. I. p. 403-412

    Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

  12. Published

    Entzunderungs- und Entkohlungsverhalten von Federnstählen (Bericht 2, 2005)

    Anghelina, D. & Krieger, W., 2005

    Research output: Book/ReportCommissioned reportTransferpeer-review

  13. Published

    High temperature behaviour of directly reduced iron fines

    Anghelina, D., Brooks, G. A. & Irons, G. A., 2007, In : Canadian metallurgical quarterly. 46, p. 373-378

    Research output: Contribution to journalArticleResearchpeer-review

  14. Published

    Entzunderungs- und Entkohlungsverhalten von Federnstählen (Bericht 5, 2006)

    Anghelina, D. & Krieger, W., 2006

    Research output: Book/ReportCommissioned reportTransferpeer-review

  15. Published

    Entzunderungs- und Entkohlungsverhalten von Federnstählen (Bericht 1, 2005)

    Anghelina, D. & Krieger, W., 2005

    Research output: Book/ReportCommissioned reportTransferpeer-review

  16. Published

    Kinetics and Control of Scaling for Reduced Surface Decarburization of Spring Steels

    Anghelina, D., Kienreich, R., Zamberger, S., Zamberger, J., Kozeschnik, E. & Schneider, R., 2010, In : Metalurgia international. XV, p. 5-8

    Research output: Contribution to journalArticleResearchpeer-review

  17. Published

    Bestimmung des Eigenschaftsspektrums beschleunigt erstarrter Proben von HSLA Stählen

    Arth, G., 2010.

    Research output: Contribution to conferencePosterResearchpeer-review

  18. Published

    Entwicklung von Stahl-Keramik-Verbunden mit verminderter Dichte

    Arth, G., 2014.

    Research output: Contribution to conferencePosterResearchpeer-review

  19. Published

    Experimentelle Simulation des Zwei-Walzen-Gießverfahrens

    Arth, G., 2011, International Student's Day of Metallurgy 2011. p. 10-20

    Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

  20. Published

    Verfahren zur Herstellung von hochfestem, niedrig legiertem Stahl

    Arth, G., Bernhard, C., Eckerstorfer, G., Hohenbichler, G. & Linzer, B., 2 Dec 2010, Patent No. 10193403.2-2122

    Research output: PatentResearch

  21. Published

    Continuous Casting Simulation Secondary Cooling

    Arth, G., 2012.

    Research output: Contribution to conferencePosterResearchpeer-review

  22. Published

    Entwicklung von Stahl-Keramik-Verbunden mit verminderter Dichte

    Arth, G., Bernhard, C., Samek, L. & Samoilov, A., 2014, In : Berg- und hüttenmännische Monatshefte : BHM. 159, p. 291-293

    Research output: Contribution to journalArticleResearchpeer-review

  23. Published

    Experimental und numerical investigations on hot tearing during continuous casting of steel

    Arth, G., Bernhard, C., Ilie, S., Schaden, T. & Pierer, R., 2014, Conference Proceedings of the 8th ECCC. p. 1-8

    Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

  24. Published

    Entwicklung von Stahl-Keramik-Verbunden mit verminderter Dichte

    Arth, G., Bernhard, C., Samek, L. & Samoilov, A., 2014, Forum für Metallurgie und Werkstofftechnik 2014 mit Zukunftskonferenz. p. xx-xx

    Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

  25. Published

    Metall-Matrix-Verbundwerkstoffe auf Eisenbasis

    Arth, G., 2012, In : Berg- und hüttenmännische Monatshefte : BHM. 157, p. 306-312

    Research output: Contribution to journalArticleResearchpeer-review

  26. Published

    Metal-Matrix-Composites (MMC)

    Arth, G., 2012.

    Research output: Contribution to conferencePosterResearchpeer-review

  27. Published

    Cu-haltige HSLA Legierung

    Arth, G., 2 Dec 2010

    Research output: PatentResearch

  28. Published

    Experimental und Numerical Investigations on Hot Tearing during Continuous Casting

    Arth, G., Ilie, S., Pierer, R. & Bernhard, C., Mar 2015, In : Berg- und hüttenmännische Monatshefte : BHM. 160, 3, p. 103-108 6 p.

    Research output: Contribution to journalArticleResearchpeer-review

  29. Published
  30. Published

    Entwicklung von Stahl-Keramik Verbunden mit verminderter Dichte

    Arth, G., 2013, 1 p.

    Research output: ThesisDoctoral ThesisResearch

  31. Published
  32. Published
  33. Published
  34. Published
  35. Published

    3D-Simulation der CC2 Stranggießanlage

    Babilli, Z., 2007

    Research output: Book/ReportCommissioned reportTransferpeer-review

  36. Published

    Berechnungsmöglichkeiten für die Wärmeleitfähigkeit von Stahl

    Babilli, Z., 2008

    Research output: Book/ReportCommissioned reportTransferpeer-review

  37. Published

    Final report of ULCOS first phase in the hydrogen plasma process

    Badr, K., 2006

    Research output: Book/ReportCommissioned reportTransferpeer-review

  38. Published

    Plasma Reduction of Iron Oxide by Methane Gas and its Process Up-scaling

    Badr, K., Bäck, E. & Krieger, W., 2007, In : Steel research international. 78, p. 275-280

    Research output: Contribution to journalArticleResearchpeer-review

  39. Published

    Reduction of iron ore by a mixture of Ar-H2 with CO and CO2 under plasma application

    Badr, K., Bäck, E. & Krieger, W., 2007, 18th International Symposium on Plasma Chemistry. p. 29B-a7-29B-a7

    Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

  40. Published

    Hydrogen Plasma Smelting Reduction SWOT Analysis

    Badr, K., 2007.

    Research output: Contribution to conferencePosterResearchpeer-review

  41. Published

    Plasma smelting reduction of iron ores by hydrogen rich gases

    Badr, K., 2006.

    Research output: Contribution to conferencePosterResearchpeer-review

  42. Published

    Hydrogen Plasma Smelting Reduction of Iron Oxide and its Process Up-scaling

    Badr, K., Bäck, E. & Krieger, W., 2007, Forum für Metallurgie und Werkstofftechnik 2007. p. 23-24

    Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

  43. Published

    Smelting of Iron Oxides Using Hydrogen Based Plasmas

    Badr, K., 2007, 169 p.

    Research output: ThesisDoctoral ThesisResearch

  44. Published
  45. Published

    EVALUATION OF THE REDUCTION BEHAVIOR OF HEMATITIC IRON ORE UNDER BLAST FURNACE NEAR CONDITIONS

    Baumgartner, K. & Hanel, M., 21 May 2014, p. 135-138. 4 p.

    Research output: Contribution to conferencePosterResearchpeer-review

  46. Published
  47. Published

    The potential for grain refinement of a super austenitic stainless steel with a cerium grain refiner

    Baumgartner, K., Bernhard, C., Presoly, P., Hafok, M. & Leitner, H., 25 May 2017, ESSC and DUPLEX 2017 - 9th European Stainless Steel Conference - Science and Market and 5th European Duplex Stainless Steel Conference and Exhibition. Associazione Italiana di Metallurgia, Vol. 2017-May.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

  48. Published

    Influence of casting temperature on the microstructure of AISI M42 high speed steel

    Baumgartner, K., Bernhard, C., Pfeiffer, A., Wieser, G. & Hafok, M., 18 Oct 2018, Ingot rolling, casting, forging 2018. p. 321 - 329 ICRF-173

    Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

  49. Published
  50. Published

    Cerium Containing Inclusions: Kinetic Model and Experimental Results

    Baumgartner, K., Bernhard, C., You, D. & Michelic, S. K., 20 Jun 2019.

    Research output: Contribution to conferencePosterResearch

  51. Published

    Statistische Auswertung heißriss-relevanter Prozessparameter im schweren Stahlguss

    Berger, M., 2018

    Research output: ThesisMaster's ThesisResearch

  52. Published

    Experimental investigation into the influence of Ti on the clogging of ULC steels in continuous casting

    Bernhard, C., Xia, G., Egger, M., Pissenberger, A. & Michelic, S., 2012, Proceedings of the AISTech 2012. p. 2191-2200

    Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

  53. Published

    Die Stranggießforschung am Lehrstuhl für Metallurgie: Entwicklung, Status und Ausblick

    Bernhard, C., 2009, In : Berg- und hüttenmännische Monatshefte : BHM. 154, p. 20-26

    Research output: Contribution to journalArticleResearchpeer-review

  54. Published

    Anforderungen an prozessorientierte Heißrissbildungsmodelle.

    Bernhard, C., 2004, In : Berg- und hüttenmännische Monatshefte : BHM. 149, p. 90-95

    Research output: Contribution to journalArticleResearchpeer-review

  55. Published

    Investigating the influence of Ti and P on the clogging of ULC steels in the continuous casting process

    Bernhard, C., Xia, G., Karasangabo, A., Egger, M. & Pissenberger, A., 2011, 7th European Continuous Casting Conference. p. Paper -17

    Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

  56. Published
  57. Published

    Verfahren zur Herstellung eines Stahlbandes

    Bernhard, C., Eckerstorfer, G., Hohenbichler, G. & Linzer, B., 15 Oct 2008, Patent No. A 1593/2006

    Research output: PatentResearch

  58. Published

    High Speed Casting versus Shell Strength.

    Bernhard, C., Wolf, M. & Hiebler, H., 2002, In : Berg- und hüttenmännische Monatshefte : BHM. 147, p. 43-47

    Research output: Contribution to journalArticleResearchpeer-review

  59. Published

    Erste Ergebnisse des neuen Hochtemperatur-Konfokalmikroskops am Lehrstuhl für Metallurgie

    Bernhard, C., Schider, S., Sormann, A., Xia, G. & Ilie, S., 2011, In : Berg- und hüttenmännische Monatshefte : BHM. 156, p. 161-167

    Research output: Contribution to journalArticleResearchpeer-review

  60. Published

    Die interaktive Stranggießsimulation auf www.steeluniversity.org

    Bernhard, C. & Sjökvist, T., 2006, In : Berg- und hüttenmännische Monatshefte : BHM. 151, p. 189-195

    Research output: Contribution to journalArticleResearchpeer-review

  61. Published

    Influence of alloying elements on the thermal contraction of peritectic steels during initial solidification

    Bernhard, C. & Xia, G., 2006, In : Ironmaking and steelmaking. 33, p. 52-56

    Research output: Contribution to journalArticleResearchpeer-review

  62. Published

    The Working Group "Continuous Casting: Metallurgy and Materials" (M²CC) at Leoben University

    Bernhard, C., Pierer, R. & Michelic, S., 2010, Proceedings of the AISTech 2010. p. 01-08

    Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

  63. Published

    Verfahren zur Ermittlung von mechanischen Eigenschaften von Werkstoffen sowie Vorrichtung hierzu

    Bernhard, C., Chimani, C. & Tubikanec, A., 15 Dec 2005, Patent No. A852/2004

    Research output: PatentResearch

  64. Published

    Simulation of austenite grain growth in continuous casting

    Bernhard, C., Reiter, J. & Presslinger, H., 2007, AISTEch2007. p. 1-10

    Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

  65. Published

    ARVEDI ESP – REAL ENDLESS STRIP PRODUCTION: THE NEXT GENERATION OF PRODUCING HIGH-VALUE STEELS STARTED UP

    Bernhard, C., Bragin, S., Gelder, S., Linzer, B., Jungbauer, A., Venturini, R. & Guindani, A., 2010, ARVEDI ESP – REAL ENDLESS STRIP PRODUCTION: THE NEXT GENERATION OF PRODUCING HIGH-VALUE STEELS STARTED UP. p. ---

    Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

  66. Published

    Near surface austenite grain growth in different casting processes for steel: Experiments and modeling

    Bernhard, C., Bragin, S. & Vanovsek, W., 2012, ICS 2012. p. Paper-296

    Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

  67. Published

    Experimental Simulation of Defect Formation in the Continuous Casting Process

    Bernhard, C., Pierer, R., Tubikanec, A. & Chimani, C., 2007, SMEA Conference on the Effect of Melting, Refining and Casting on Product Quality and Properties. p. Session II-Paper 2

    Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

  68. Published

    Determination of the nature of liquid steel - alumina interfacial interactions from sessile drop measurements: cases of Fe-Ti and Fe-P alloys

    Bernhard, C., Karasangabo, A., Presslinger, H. & Reisinger, P., 2007, Proceedings of the Chinese - European Exchange in Duesseldorf. p. 219-232

    Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

  69. Published

    Research on continuous casting at University of Leoben - An overview

    Bernhard, C., 11 May 2016.

    Research output: Contribution to conferencePresentationTransfer

  70. Published

    A transient 2D solidification model for defect prevention in the continuous casting process

    Bernhard, C., 25 May 2016.

    Research output: Contribution to conferencePresentationResearch

  71. Published

    Near net shape casting - current status and future perspectives

    Bernhard, C., 22 Jun 2016.

    Research output: Contribution to conferencePresentationTransfer

  72. Published
  73. Published

    On the Relevance of Microsegregation Models for Process Control in Continuous Casting of Steel

    Bernhard, M. C., Presoly, P., Bernhard, C., Six, J. & Ilie, S., 2017, Conference Proceedings of the 26th Anniversary International Conference on Metallurgy and Materials - Metal 2017. Brno, Czech Republic

    Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

  74. Published

    An alternative approach for the experimental verification of microsegregation models using an in-situ hot tensile test during solidification of steel

    Bernhard, M. C., Presoly, P., Bernhard, C. & You, D., 3 Sep 2018, Proceedings of the 7th International Conference on Solidification and Gravity 2018. Miskolc-Lillafüred, Hungary

    Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

  75. Published

    Simulation of shell strength properties by the SSCT test

    Bernhard, C., Hiebler, H. & Wolf, M. M., 1 Dec 1996, In : ISIJ international. 36, SUPPL.

    Research output: Contribution to journalArticleResearchpeer-review

  76. Published

    Experimental simulation of subsurface crack formation in continuous casting

    Bernhard, C., Hiebler, H. & Wolf, M. M., 1 Jan 2000, In : Revue de Metallurgie. Cahiers D'Informations Techniques. 97, 3, p. 333-344 12 p.

    Research output: Contribution to journalArticleResearchpeer-review

  77. Published

    Evaluation of AHSS concepts with a focus on the product properties and appropriate casting characteristics of Arvedi ESP thin slab casters

    Bernhard, C., Linzer, B., Presoly, P., Watzinger, I. & Watzinger, J., 2019, In : IOP Conference Series: Materials Science and Engineering. 529.2019, 012071, p. 1-10 10 p., 012071.

    Research output: Contribution to journalArticleResearchpeer-review

  78. Published

    The role of FeTi-addition on micro-inclusions in the production of ULC steel grades via RH-process route

    Bernhard, C., Dorrer, P., Michelic, S. K. & Rössler, R., 2019, Proceedings of the 4th European Steel Technology and Application Days (ESTAD). 7 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

  79. Published

    The role of FeTi-addition on micro-inclusions in the production of ULC steel grades via RH-process route

    Bernhard, C., Dorrer, P., Michelic, S. K. & Rössler, R., 9 Oct 2019, In : Berg- und hüttenmännische Monatshefte : BHM. 2019, 11, p. 475-478 4 p.

    Research output: Contribution to journalArticleResearchpeer-review

  80. Published
  81. Published

    Effect of alkaline elements on the reactivity, strength and structural properties of blast furnace cokes

    Bhattacharyya, A., Schenk, J., Rantitsch, G., Thaler, S. & Stocker, H., 2014, Proceedings of SHMD 2014. p. 412-412

    Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

  82. Published

    Behaviour of chars from non-coking coals under different conditions of smelting reduction processes

    Bhattacharyya, A., Schenk, J., Rantitsch, G. & Heckmann, H., 2014, Proceedings of 4th VDEh-CSM Conference on Metallurgical Fundamentals. p. 58-65

    Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

  83. Published

    Characterization and assessment of lump COREX® chars under various process conditions

    Bhattacharyya, A., Schenk, J., Rantitsch, G. & Heckmann, H., 2014, ESTAD and JSI 2014 - Abstract Booklet. p. 324-325

    Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

  84. Published

    Experimental Analysis of the Interfacial Wetting Phenomena Between Slag and Coke Surface Under Simulated Conditions of the Bosh Region of Blast Furnace

    Bhattacharyya, A., Schenk, J., Arth, G., Stocker, H. & Thaler, C., 4 May 2015, AISTech 2015 & ICSTI Proceedings. p. 713-721 077_30431-5159

    Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

  85. Published

    Effect of variable process conditions on the reactivity, strength and structural features of blast furnace cokes

    Bhattacharyya, A., Rantitsch, G., Schenk, J., Thaler, C. & Stocker, H., 5 Oct 2015, p. 606-607.

    Research output: Contribution to conferencePaperResearchpeer-review

  86. Published

    Effect of Alkaline Elements on Coke Structure under Blast Furnace Process Conditions

    Bhattacharyya, A., Schenk, J., Letofsky-Papst, I. & Albering, J., May 2016, Effect of Alkaline Elements on Coke Structure under Blast Furnace Process Conditions.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

  87. Published

    Determination of the specific surface area of cokes and chars for simulated process conditions of blast furnace and smelting reduction routes

    Bhattacharyya, A., Schenk, J., Thaler, C. & Stocker, H., Jun 2016, SCANMET V Proceedings.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

  88. Published

    Experimental Simulation of the Interaction of Slag and Hot Metal with Coke at the Bosh Region of Blast Furnace

    Bhattacharyya, A., Schenk, J., Jäger, M., Stocker, H. & Thaler, C., Sep 2016, 7th European Coke and Ironmaking Conference Proceedings.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

  89. Published
  90. Published

    Characterization of Coke and Char for Optimized Use in Ironmaking Processes

    Bhattacharyya, A., 2017

    Research output: ThesisDoctoral ThesisResearch

  91. Published

    Optimization of Coal Briquettes for Lower Reactivity and Higher Strength under Melter-gasifier Conditions

    Bhattacharyya, A., Heckmann, H., Schenk, J. & Wurm, J., 2017.

    Research output: Contribution to conferencePaperResearchpeer-review

  92. Published
  93. Published

    Characterization of Ironmaking Raw Materials Using Computed Tomography

    Bhattacharyya, A., Schenk, J., Habe, D. & Oberdorfer, B., May 2018, AISTECH 2018 Proceedings. p. 211 216 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

  94. Published

    STRUCTURAL CHARACTERIZATION OF COKE FROM THE TUYERE REGION OF THE BLAST FURNACE

    Bhattacharyya, A., Rantitsch, G., Schenk, J., Janhsen, U. & Guenbati, A., Sep 2018, Proceedings of 8th International Congress on Science and Technology of Ironmaking.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

  95. Published

    Experimental determination of the strength and reactivity of lumpy and briquetted chars from non-coking coals under melter-gasifier conditions

    Bhattacharyya, A., Schenk, J. & Heckmann, H., 26 Nov 2018, In : Ironmaking and steelmaking. 45, 10, p. 907-912

    Research output: Contribution to journalArticleResearchpeer-review

  96. Published

    INVESTIGATION OF THE SPECIFIC SURFACE AREA AND PORE STRUCTURE OF BLAST FURNACE SINTERS

    Bhattacharyya, A., Schenk, J., Schaffer, C., Schadler, S. & Schuster, E., Jun 2017, European Steel Technology and Application Days ESTAD 2017: Conference Proceedings.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

  97. Published

    Structural Change of Coke During the Burden Descent in an Experimental Blast Furnace

    Bhattacharyya, A., Rantitsch, G., Wiener, J., Schenk, J., Pethke, J. & Fredriksson, U., May 2019, AISTECH 2019 Proceedings.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

  98. Published

    Characterization of coke surface using topographic and specific surface area measurement techniques

    Bhattacharyya, A., Rantitsch, G., Schenk, J., Guenbati, A., Janhsen, U. & Schulten, M., Jun 2019, METEC-ESTAD 2019 Proceedings.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

  99. E-pub ahead of print

    A Novel Devolatilization Technique of Pre-reduction of Iron Ore Using Lean Grade Coal

    Biswas, C., Bhattacharyya, A., Das, G. C., Ghosh Choudhuri, M. & Dey, R., 20 Aug 2015, In : Berg- und hüttenmännische Monatshefte : BHM. 161.2016, 3, p. 95-101 7 p.

    Research output: Contribution to journalArticleResearchpeer-review

  100. Published

    Statistical optimisation parameter for lean grade self-reducing nuggets by surface response modelling to produce pig iron

    Biswas, C., Samanta, S., Bhattacharyya, A., Ghosh Choudhuri, M. & Dey, R., 2016, In : Transactions of the institutions of mining and metallurgy. Section C, Mineral processing and extractive metallurgy . Transactions of the Institutions of Mining and Metallurgy: Section C, p. 1 10 p.

    Research output: Contribution to journalArticleResearchpeer-review

  101. Published

    ARVEDI ESP PROCESS – AN ULTIMATE TECHNOLOGY CONNECTING CASTING AND ROLLING IN ENDLESS MODE

    Bragin, S., Rimnac, A., Linzer, B., Bianchi, A., Mantova, A., Rizzi, A. & Bernhard, C., 2013, Rolling 2013. p. 1-13

    Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

  102. Published

    Thermomechanical processing of low-carbon steels on Arvedi endless strip production lines: Modelling and plant results

    Bragin, S., Bernhard, C., Linzer, B., Rimnac, A., Guindani, A. & Venturini, R., 2012, TMP2012 - 4th International Conference on Thermomechanical Processing of Steel. p. Session 9-Paper 1

    Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

  103. Published

    Gießwalzen von HSLA Stählen

    Bragin, S., 2012

    Research output: ThesisDoctoral ThesisResearch

  104. Published

    Einfluss von Spurenelementen auf die Heißrissbildung beim Stranggießen von Stahl

    Brombauer, M., Reiter, J. & Pierer, R., 2007, Proceedings des 14. Internationalen Studententags der Metallurgie. p. 22-27

    Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

  105. Published
  106. Published
  107. Published

    Metallurgische Einflüsse auf die Umformbarkeit von Stählen

    Buchmayr, B. & Bernhard, C., 2010, XXIX. Verformungskundliches Kolloquium. p. 5-11

    Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

  108. Published

    Influence of CaO dissolution on the kinetics of metallurgical reactions in BOF-process

    Bundschuh, P., Schenk, J., Hiebler, M., Panhofer, H. & Sormann, A., 2014, Influence of CaO dissolution on the kinetics of metallurgical reactions in BOF-process. p. 89-100

    Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

  109. Published

    Dissolution behavior of CaO in BOF-process and its effect on the kinetics of metallurgical reactions

    Bundschuh, P., Schenk, J., Hiebler, M., Panhofer, H., Sormann, A. & Klösch, G., 2014, Seminar on Metallurgical Fundamentals. p. 106-118

    Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

  110. Published

    Effect of Interaction Area on the Thermodynamics and Kinetic Modelling of BOF Converter

    Bundschuh, P., Schenk, J., Schütt, S., Sormann, A. & Panhofer, H., 12 May 2015, Proceedings of The 6th International Congress on the Science and Technology of Steelmaking. p. 151 - 154 4 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

  111. Published

    CHALLENGES AND LIMITING FACTOS FOR THE RECYCLING OF STEEL SCRAP IN EUROPE

    Bundschuh, P. & Schenk, J., 1 Oct 2015, MINING THE TECHNOSPHERE: "Drivers and Barriers, Challenges and Opportunities". Lederer, J., Laner, D., Rechberger, H. & Fellner, J. (eds.). 1 ed. Wien, Vol. 1. p. 131-135 5 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

  112. Published

    Aufheizverhalten von Hot Briquetted Iron unter Stickstoffatmosphäre

    Bundschuh, P., 2013

    Research output: ThesisMaster's ThesisResearch

  113. Published

    Thermodynamische und kinetische Modellierung von LD-Konvertern

    Bundschuh, P., 2017

    Research output: ThesisDoctoral ThesisResearch

  114. Published

    Impact of different heat capacity functions on thermodynamic and kinetic modeling of the basic oxygen furnace

    Bundschuh, P., Schenk, J., Schütt, S., Panhofer, H. & Sormann, A., 1 Jan 2015, AISTech 2015 - Proceedings of the Iron and Steel Technology Conference and ICSTI 2015. Vol. 2. p. 2090-2098 9 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

  115. Published

    Untersuchungen des Ausscheidungsverhaltens von H-Karbiden in einer kohlenstoffhaltigen TiAl Legierung mittels in- und ex-situ Experimenten

    Burtscher, M., Kirchheimer, K., Weißensteiner, I., Bernhard, C., Lederhaas, B., Klein, T., Mayer, S. & Clemens, H., 2017, Praktische Metallographie Sonderband 51. p. 55-60 (Practical metallography = Praktische Metallographie).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

  116. Published
  117. Published
  118. Published

    Vergleich der Schmelzreduktionsverfahren

    Bäck, E., Schneider, R. & Hiebler, H., 1997, In : Berg- und hüttenmännische Monatshefte : BHM. 142, p. 195-203

    Research output: Contribution to journalArticleResearchpeer-review

  119. Published

    Direktreduktionsanlagen in Venezuela und Mexiko

    Bäck, E. & Schneider, R., 1996, In : Berg- und hüttenmännische Monatshefte : BHM. 141, p. 99-105

    Research output: Contribution to journalArticleResearchpeer-review

  120. Published

    Interdisziplinäre Untersuchungen zum Ferrum Noricum am Hüttenberger Erzberg - ein Vorbericht

    Cech, B., Presslinger, H. & Walach, G., 2005, In : Res montanarum : Zeitschrift des Montanhistorischen Vereins für Österreich. p. 72-78

    Research output: Contribution to journalArticleResearchpeer-review

  121. Published

    Der mittelalterliche Eisenschmelzplatz auf der Kreuztratte am Hüttenberger Erz

    Cech, B., Presslinger, H. & Walach, G., 2007, In : Res montanarum : Zeitschrift des Montanhistorischen Vereins für Österreich. p. 70-74

    Research output: Contribution to journalArticleResearchpeer-review

  122. Published

    Sorption Of Gallium from the Alkali solutions Based on Anionites

    Cheremisina, E., 2013, In : Russian Journal of Non-Ferrous Metals. 54, ISSN 1067-8212, p. 201-108

    Research output: Contribution to journalArticleResearchpeer-review

  123. Published

    Повышение аналитических характеристик полупроводниковых адсорбционных датчиков на основе SnO2 с помощью фотонной симуляции

    Cheremisina, E., 2012, Повышение аналитических характеристик полупроводниковых адсорбционных датчиков на основе SnO2 с помощью фотонной симуляции. 10 ed. Химическая физика экологических процессов, Vol. 31.

    Research output: Chapter in Book/Report/Conference proceedingChapterResearch

  124. Published

    Improving the analytical characteristics of adsorption semiconductor sensors based on adsorbtion SnO2 using photon simulation

    Cheremisina, E., 5 Sep 2012, In : Russian Journal of Physical Chemistry. 6, p. 228-230 3 p.

    Research output: Contribution to journalArticleResearchpeer-review

  125. Published

    Influence of Magnesium Oxide content on kinetics of lime dissolution in steelmaking slags

    Cheremisina, E., Schenk, J., Ludwig, N., Paul, A. & Wimmer, G., 17 Jan 2017, In : ISIJ international. 57, 2, p. 304-313 10 p.

    Research output: Contribution to journalArticleResearchpeer-review

  126. Published
  127. Published

    Kein sechswertiges Chrom in Stahlwerksschlacken

    Cheremisina, E. & Schenk, J., Aug 2017, In : Stahl und Eisen. 137, 8, p. 33-34 2 p.

    Research output: Contribution to journalLetterResearch

  128. Published

    Dissolution kinetics of CaO and MgO in converter steelmaking slags

    Cheremisina, E., 2016

    Research output: ThesisDoctoral ThesisResearch

  129. Published
  130. Published

    Dissolution rate of various MgO materials in steel and secondary metallurgy slags

    Cheremisina, E., Schenk, J., Viertauer, A., Nilica, R. & Roessler, R., 1 Jan 2018, AISTech 2018 Proceedings - Iron and Steel Technology Conference and Exposition. Vol. 2018-May. p. 1103-1115 13 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

  131. Published

    Chromium Stability in Steel Slags

    Cheremisina, E. & Schenk, J., Nov 2017, In : Steel research international. 88, 11

    Research output: Contribution to journalArticleResearchpeer-review

  132. Published

    Kinetics and Mechanisms of Dolime Dissolution in Steelmaking Slag

    Cheremisina, E., Schenk, J., Nocke, L., Paul, A. & Wimmer, G., 1 Jan 2019, In : Metallurgical and Materials Transactions B: Process Metallurgy and Materials Processing Science. 50.2019, 3, p. 1269 - 1276 8 p.

    Research output: Contribution to journalArticleResearchpeer-review

  133. Published

    Kinetics of lime dissolution in steelmaking slags

    Cheremisina, E., Schenk, J., Tappeiner, T., Sormann, A. & Wimmer, G., 5 Oct 2015, Asia Steel International Conference 2015 Proceedings. 2 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

  134. Published

    Thermodynamic Model of Ion-Exchange Process as Exemplified by Cerium Sorption from Multisalt Solutions

    Cheremisina, O. V., Schenk, J., Cheremisina, E. A. & Ponomareva, M. A., 1 Jan 2019, In : Journal of Mining Institute. 237.2019, p. 307-316 10 p.

    Research output: Contribution to journalArticleResearchpeer-review

  135. E-pub ahead of print

    The effect of alkali on the reaction kinetics and strength of blast furnace coke

    Dastidar, M. G., Bhattacharyya, A., Sarkar, B. K., Dey, R., Mitra, M. K. & Schenk, J., 21 Feb 2020, In : Fuel. 268.2020, May, 10 p., 117388.

    Research output: Contribution to journalArticleResearchpeer-review

  136. Published

    Investigation of Decarburization in Spring Steel Production Process - Part II: Simulation

    Dejun, L., Burzic, D., Anghelina, D., Krieger, W. & Kozeschnik, E., 2009, In : Steel research international. 80, p. 304-310

    Research output: Contribution to journalArticleResearchpeer-review

  137. Published

    Investigation of Decarburization in Spring Steel Production Process - Part I: Experiments

    Dejun, L., Anghelina, D., Burzic, D., Zamberger, J., Kienreich, R., Schifferl, H., Krieger, W. & Kozeschnik, E., 2009, In : Steel research international. 80, p. 298-303

    Research output: Contribution to journalArticleResearchpeer-review

  138. Published

    Investigation of Decarbuization in Spring Steel Production Process-Part I: Experiments

    Dejun, L., Anghelina, D., Burzic, D., Zamberger, J., Kienreich, R., Schifferl, H., Krieger, W. & Kozeschnik, E., 2009, In : Steel research international. 4, p. 298-303

    Research output: Contribution to journalArticleResearchpeer-review

  139. Published
  140. Published
  141. Published

    Optimization of processing parameters on an ESP line

    Dierer, F., 2015

    Research output: ThesisMaster's ThesisResearch

  142. Published

    Austenite Grain Growth and the Surface Quality of Continuously Cast Steel

    Dippenaar, R., Bernhard, C., Schider, S. & Wieser, G., 2014, In : Metallurgical and Materials Transactions B: Process Metallurgy and Materials Processing Science. 45B, p. 409-418

    Research output: Contribution to journalArticleResearchpeer-review

  143. Published

    Austenite grain growth and the surface quality of continuously cast steel

    Dippenaar, R., Bernhard, C., Schider, S. & Wieser, G., 2012, 15th International Conference on Advances in Materials Processing Technologies. p. ID-10318

    Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

  144. Published
  145. Published
  146. Published

    Modellierung des aluminothermischen Heizens von Stahlschmelzen

    Doppler, T., 2013

    Research output: ThesisMaster's ThesisResearch

  147. Published

    Study of Clogging Deposit Buildup in Al-killed and Ca-Treated High-Sulfur Steels With Focus on the Steel/Refractory Interface

    Dorrer, P., Michelic, S., Klösch, G., Reiter, J., Paul, A. & Bernhard, C., 2017, AISTech 2017 Proceedings. p. 1555 - 1565

    Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

  148. Published
  149. Published

    Study on the Influence of FeTi‐Addition on the Inclusion Population in Ti‐Stabilized ULC Steels and Its Consequences for SEN‐Clogging

    Dorrer, P., Michelic, S. K., Bernhard, C., Penz, A. & Rössler, R., 1 Jan 2019, In : Steel research international. 2019, 5, 13 p., 1800635.

    Research output: Contribution to journalArticleResearchpeer-review

  150. Published
  151. Published
  152. Published
  153. Published
  154. Published

    Bestimmung der Fließeigenschaften von Schüttgütern

    Ellersdorfer, M. & Thaler, C., 2009, Tagungsband zum 5. Minisymposium Verfahrenstechnik an der TU Wien. p. 103-110

    Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

  155. Published
  156. Published
  157. Published

    Reduction Behaviour of Hematite to Magnetite under Fluidized Bed Conditions

    Feilmayr, C., Thurnhofer, A., Winter, F., Mali, H. & Schenk, J., 2004, In : ISIJ international. 44, p. 1125-1133

    Research output: Contribution to journalArticleResearchpeer-review

  158. Published

    Metallurgische Grundlagen als Basis zur Entwicklung von alternativen Schweißzusatzwerkstoffen im Pipelinebau

    Fiedler, M., Krieger, W. & Klagges, W., 2008, In : Schweiß- & Prüftechnik. p. 67-70

    Research output: Contribution to journalArticleResearchpeer-review

  159. Published
  160. Published
  161. Published

    Einsatz moderner Messtechnik zur Beurteilung der Erstarrungsvorgänge beim Stranggießen.

    Forsthuber, M., Rauter, W., Doringer, E., Bernhard, C. & Chimani, C., 2004, In : Berg- und hüttenmännische Monatshefte : BHM. 149, p. 77-83

    Research output: Contribution to journalArticleResearchpeer-review

  162. Published
  163. Published
  164. Published

    HT-LSCM - A valuable tool for surface microstructure investigations

    Fuchs, N., Krobath, R., Bernhard, C., Ilie, S. & Xia, G., 1 Dec 2016.

    Research output: Contribution to conferencePresentationResearchpeer-review

  165. Published
  166. Published

    In-situ Untersuchung von Austenitkornwachstumsprozessen in Stählen mittels Hochtemperatur Laser-Scanning-Konfokal-Mikroskop

    Fuchs, N. & Bernhard, C., 1 Apr 2019, In : Berg- und hüttenmännische Monatshefte : BHM. 164.2019, 5, p. 200-204 5 p.

    Research output: Contribution to journalArticleResearchpeer-review

  167. Published

    HT-LSCM as a Tool for Indirect Determination of Precipitates by Real-Time Grain Growth Observations

    Fuchs, N., Bernhard, C., Michelic, S. & Dippenaar, R., 1 Jan 2020, TMS 2020 149th Annual Meeting and Exhibition Supplemental Proceedings. Peng, Z., Hwang, J-Y., Downey, J., Gregurek, D., Zhao, B., Yucel, O., Keskinkilic, E., Jiang, T., White, J. & Mahmoud, M. (eds.). Springer, p. 47-55 9 p. (Minerals, Metals and Materials Series).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

  168. Published

    Austenite grain growth investigated by complementary in-situ techniques

    Gamsjäger, E., Tichauer, W., Lederhaas, B., Garcin, T. & Militzer, M., 28 Sep 2016.

    Research output: Contribution to conferencePresentationResearchpeer-review

  169. Published

    Evaluation of the Potential for Reduction of CO2 Emissions at the Secondary Metallurgy

    Gerasev, A., Bundschuh, P., Schenk, J., Viertauer, A., Trummer, B., Arth, G., Rössler, R. & Reisinger, P., 1 Nov 2016, In : RHI bulletin : the journal of refractory innovations. 2016, 1, p. 28-34 7 p.

    Research output: Contribution to journalArticleResearch

  170. Published
  171. Published

    Eigenschaften hochmanganhaltiger Stähle unter stranggießähnlichen Beanspruchungen.

    Gigacher, G., Bernhard, C. & Krieger, W., 2004, In : Berg- und hüttenmännische Monatshefte : BHM. 149, p. 112-117

    Research output: Contribution to journalArticleResearchpeer-review

  172. Published

    High Temperature properties and the crack susceptibility of new steel grades for automotive purposes

    Gigacher, G., Pierer, R. & Bernhard, C., 2005, Proc. Computational Methods and Experimental Measurements in Material Characterisation. p. 1-5

    Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

  173. Published

    Herstellung und Vergießbarkeit moderner Stähle für den Automobilbau

    Gigacher, G., Bernhard, C. & Krieger, W., 2003, In : Berg- und hüttenmännische Monatshefte : BHM. 148, p. 460-465

    Research output: Contribution to journalArticleResearchpeer-review

  174. Published

    Non-Metallic Inclusions in High-Manganese-Alloy Steels

    Gigacher, G., Krieger, W., Pjotr, S. & Thomser, C., 2005, In : Steel research international. 76, p. 644-649

    Research output: Contribution to journalArticleResearchpeer-review

  175. Published

    Metallurgical Aspects of Casting High-Manganese Steel Grades

    Gigacher, G., Pierer, R., Wiener, J. & Bernhard, C., 2006, In : Advanced Engineering Materials. 8, p. 1096-1100

    Research output: Contribution to journalArticleResearchpeer-review

  176. Published

    Herstellung und Vergießbarkeit hochfester Stähle mit gutem Umformvermögen

    Gigacher, G., 2006, 251 p.

    Research output: ThesisDoctoral ThesisResearch

  177. Published

    Werkstoff- und Planheitsuntersuchungen von wärmebehandelten Stahlbändern

    Glaser, G. M., 2014, 128 p.

    Research output: ThesisMaster's ThesisResearch

  178. Published

    Kornfeinung ausscheidungsverfestigter Hochtemperaturferrite mittels Ce-haltiger Einschlüsse

    Godor, F. R., Mayerhofer, A., Presoly, P., Clemens, H., Mayer, S. & Bernhard, C., 2018, Praktische Metallographie Sonderband: Fortschritte in der Metallographie. 1 ed. Vol. 52. p. 319-324

    Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

  179. Published

    Kornfeinung ausscheidungsverfestigter Hochtemperaturferrite mittels Ce-haltiger Einschlüsse

    Godor, F. R., Mayerhofer, A., Presoly, P., Clemens, H., Mayer, S. & Bernhard, C., 4 Apr 2019, In : Berg- und hüttenmännische Monatshefte : BHM. 164.2019, 5, p. 220-224 5 p.

    Research output: Contribution to journalArticleResearchpeer-review

  180. Published

    Experimentelle Untersuchungen über das Aluminium-Sauerstoff-Gleichgewicht in Eisen-Mangan-Schmelzen bei 1600°C

    Goriupp, J., 2009

    Research output: Book/ReportCommissioned reportTransferpeer-review

  181. Published

    The importance of sulfur in the iron and steel industry

    Goriupp, J. & Schenk, J., 2012, The XII. International Symposium for Desulfurization of Hot Metal and Steel. p. 33-40

    Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

  182. Published

    Grundlegende Untersuchungen zur Eisenverteilung in Roheisenentschwefelungsschlacken (AlzChem/LfM 1)

    Goriupp, J., 2011

    Research output: Book/ReportCommissioned reportTransferpeer-review

  183. Published

    Quantifying of a Dynamic Refractory Wear Test Setup for MgO-C Products

    Goriupp, J., Rief, A. & Schenk, J., 2012, In : Berg- und hüttenmännische Monatshefte : BHM. 157, p. 340-344

    Research output: Contribution to journalArticleResearchpeer-review

  184. Published

    Dynamic Refractory Wear Test Method for Magnesia-Carbon Products

    Goriupp, J., Rief, A. & Schenk, J., 2012, In : RHI bulletin : the journal of refractory innovations. 1, p. 58-62

    Research output: Contribution to journalArticleResearchpeer-review

  185. Published
  186. Published

    Vorhersage zur MgO-Sättigung von sekundärmetallurgischen Stahlwerksschlacken

    Goriupp, J., 2012.

    Research output: Contribution to conferencePosterResearchpeer-review

  187. Published

    Erweiterte Untersuchungen zur Eisenverteilung in Roheisenentschwefelungsschlacken (AlzChem/LfM 2)

    Goriupp, J., 2011

    Research output: Book/ReportCommissioned reportTransferpeer-review

  188. Published

    Thermodynamische Berechnung des Einflusses des FeOn Gehaltes auf die MgO-Löslichkeit von Pfannenschlacken.

    Goriupp, J., 2011.

    Research output: Contribution to conferencePosterResearchpeer-review

  189. Published

    Thermodynamische Berechnung der MgO-Sättigung von Pfannenschlacken

    Goriupp, J., 2012.

    Research output: Contribution to conferencePosterResearchpeer-review

  190. Published

    Entwicklung und Erprobung einer dynamischen Testmethode zur chemischen Verschleißsimulation von MgO-C Produkten.

    Goriupp, J., 2011.

    Research output: Contribution to conferencePosterResearchpeer-review

  191. Published

    Development of a dynamic refractory wear testing method for MgO-C products

    Goriupp, J., 2011, In : RHI Marketing & Technology Steel News . p. 8-11

    Research output: Contribution to journalArticleResearchpeer-review

  192. Published
  193. Published

    Untersuchungen zur Verminderung der Eisenverluste bei der Roheisenentschwefelung

    Goriupp, J., 2012.

    Research output: Contribution to conferencePosterResearchpeer-review

  194. Published
  195. Published
  196. Published
  197. Published
  198. Published

    Charakterisierung der Primärstruktur einer im Vakuuminduktionsofen (VIM) erschmolzenen X2NiCoMo18 9 5 (V720) Elektrode

    Graf, A. & Korp, J., 2006

    Research output: Book/ReportCommissioned reportTransferpeer-review

  199. Published
  200. Published
  201. Published

    Diffusional constrained crystal nucleation during peritectic phase transitions

    Griesser, S., Reid, M., Bernhard, C. & Dippenaar, R., 2014, In : Acta materialia. 67, p. 335-341

    Research output: Contribution to journalArticleResearchpeer-review

  202. Published

    AS2A Software - A new tool for Automatic Solidification Structure Analysis

    Griesser, S., O'Leary, P., Stangl, S. & Pierer, R., 2009.

    Research output: Contribution to conferencePosterResearchpeer-review

  203. Published

    Automatic Determination of Primary Grain Size using Dendrites Orientation in Metallurgical Micrographs

    Griesser, S., O'Leary, P. & Pierer, R., 2009, Quality Control by Artificial Vision. p. 1-2

    Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

  204. Published

    In-situ quantification of micro-segregation that occurs during the solidification of steel

    Griesser, S., Reid, M., Pierer, R., Bernhard, C. & Dippenaar, R., 2012, 5th International Conference on the Science and Technology of Steelmaking. p. Paper-1143

    Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

  205. Published
  206. Published
  207. Published

    Effect of nucleation undercooling on the kinetics and mechanism of the peritectic phase transition in steel

    Griesser, S., Bernhard, C. & Dippenaar, R., 1 Jan 2014, In : Acta Materialia. 81, p. 111-120 10 p.

    Research output: Contribution to journalArticleResearchpeer-review

  208. Published

    Vergleich von Analyseverfahren zur Bestimmung von Eisenoxiden

    Gruber, C., Voller, N., Bäck, E. & Skorianz, M., 2011

    Research output: Book/ReportCommissioned reportTransferpeer-review

  209. Published
  210. Published

    Vergleichsstudie martensitischer korrosionsbeständiger Stähle

    Gröblinger, H. H., 2014, 108 p.

    Research output: ThesisMaster's ThesisResearch

  211. Published
  212. Published

    Charakterisierung der Erstarrungsstruktur von Stranggussbrammen

    Hadler, M., 2010

    Research output: ThesisMaster's ThesisResearch

  213. Published

    Metallurgische Untersuchung von Laserauftragsschweißungen

    Hammer, M., Schneeberger, G., Steinlechner, S., Ernst, G. & Korp, J., 2007

    Research output: Book/ReportCommissioned reportTransferpeer-review

  214. Published

    Vergleich zweier druckaufgestickter, korrosionsbeständiger Stähle unterschiedlicher Herstelltechnologie

    Hammer, M., 2009, 172 p.

    Research output: ThesisMaster's ThesisResearch

  215. Published

    Reduction properties of pellets composed of siderite-manganese ore

    Hanel, M. & Skorianz, M., 2013

    Research output: Book/ReportCommissioned reportTransferpeer-review

  216. Published

    Charakterisierung von Rohmaterialien für die Eisenerzherstellung mit Bildverarbeitung

    Hanel, M., Kain-Bückner, B., Schenk, J., Hauzenberger, F., Stocker, H. & Thaler, C., 2013, In : Berg- und hüttenmännische Monatshefte : BHM. 158, p. 445-446

    Research output: Contribution to journalArticleResearchpeer-review

  217. Published

    Preparation, reduction and melting of manganese containing iron ore pellets

    Hanel, M., 2014

    Research output: Book/ReportCommissioned reportTransferpeer-review

  218. Published

    Reduktionseigenschaften von Pellets mit unterschiedlichen Mengen an Rücklaufstoffen

    Hanel, M., 2012

    Research output: Book/ReportCommissioned reportTransferpeer-review

  219. Published

    Reduction properties of iron, titanium and vanadium containing ore from EVRAS Highveld Steel and Vanadium

    Hanel, M., 2012

    Research output: Book/ReportCommissioned reportTransferpeer-review

  220. Published

    Characterization of Different Lump Ore Brands According to Industrial Scale Process Conditions by Means of Reducibility Testing and Morphological Investigation

    Hanel, M., Skorianz, M., Schenk, J., Mali, H., Hauzenberger, F., Stocker, H. & Thaler, C., 2013, AISTech 2013 Proceedings. p. 447-456

    Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

  221. Published

    Characterization of burden material for ironmaking by means of reduction tests with morphological characterization

    Hanel, M., Mali, H., Thaler, C., Stocker, H., Hauzenberger, F., Skorianz, M. & Schenk, J., 2013, The ISIJ-VDEh-Jernkontoret Joint Symposium. p. 145-153

    Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

  222. Published
  223. Published

    Bewertung der Reduzierbarkeit und Zerfallsstabilität von Sinter und Stückerz (als Rostbelag verwendet)

    Hanel, M., 2014

    Research output: Book/ReportCommissioned reportTransferpeer-review

  224. Published

    Reducibility of a Hematitic Lump Ore at different near Blast Furnace Conditions

    Hanel, M., Schenk, J., Mali, H., Hauzenberger, F., Thaler, C. & Stocker, H., 2014, 1st ESTAD & 31st JSI . p. 1-2

    Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

  225. Published

    Chemistry vs. Morphology vs. Reducibility — Some (Non-) Existing Correlations

    Hanel, M., Kain-Bückner, B., Schenk, J., Mali, H., Hauzenberger, F., Thaler, C. & Stocker, H., 4 May 2015, AISTech 2015 & ICSTI Proceedings. p. 593-602 10 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

  226. Published

    Characterization of Ferrous Burden Material for Use in Ironmaking Technologies

    Hanel, M., 2014

    Research output: ThesisDoctoral ThesisResearch

  227. Published
  228. Published
  229. Published

    Elektrolytische Extraktion von nichtmetallischen Einschlüssen

    Hartl, M., 2009.

    Research output: Contribution to conferencePosterResearchpeer-review

  230. Published
  231. Published

    Vacuum induction melting – optimisation of pressure dependent reactions

    Hasenhündl, R., Presoly, P., Schützenhöfer, W., Tanzer, R., Hildebrand, F. & Reiter, G., 2007, International Symposium on Liquid Metal Processing and Casting - LMPC 2007. p. 289-294

    Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

  232. Published

    Removal of Nitrogen from Steel by Slag - A Literature Review

    Hasenhündl, R., 2006, Removal of Nitrogen from Steel by Slag - A Literature Review. ASMET, p. 3-10

    Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

  233. Published

    Behaviour of Non-Metallic-Inclusions in Maraging Steels During the VIM-VAR Process Route

    Hasenhündl, R., Graf, A., Tanzer, R., Reiter, G., Korp, J. & Schützenhöfer, W., 2007, Proceedings of the 7th International Conference on Clean Steel. OMBKE, p. 418-426

    Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

  234. Published

    Evaluation of metallurgical practices in the Special Steel Work at Böhler using new sampling and analysing methods on taking the maraging Grades X2NiCoMo 18 9 5, X3NiCoMoTi 18 9 5 and X2NiCoMo 18 8 5 as Examples

    Hasenhündl, R., Rabitsch, R. & Korp, J., 2005, Proceedings of the 12th International Students Day of Metallurgy. p. 1-5

    Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

  235. Published
  236. Published

    Methods for Assessing the Properties of Fine Iron Ores for Reduction Processes

    Hauzenberger, F., Reidetschläger, J., Mali, H. & Schenk, J., 2004, In : Berg- und hüttenmännische Monatshefte : BHM. 149, p. 385-392

    Research output: Contribution to journalArticleResearchpeer-review

  237. Published
  238. Published
  239. Published

    Das Eisenhüttenwesen in den BHM

    Hiebler, H., 2005, In : Berg- und hüttenmännische Monatshefte : BHM. 150, p. 28-36

    Research output: Contribution to journalArticleResearchpeer-review

  240. Published

    Entwicklung des LD-Verfahrens

    Hiebler, H., 2007, Naturwissenschaften, Medizin und Technik aus Graz. p. 283-297

    Research output: Chapter in Book/Report/Conference proceedingChapterResearch

  241. Published
  242. Published

    Mechanical properties and crack susceptibility of steel during solidification

    Hiebler, H. & Bernhard, C., 1 Jan 1999, In : Steel Research. 70, 8, p. 349-355 7 p.

    Research output: Contribution to journalArticleResearchpeer-review

  243. Published

    Beurteilung der Einflussgrößen auf die Verdüsbarkeit von Metallschmelzen

    Hirtler, M., 2018

    Research output: ThesisMaster's ThesisResearch

  244. Published

    Metallurgical approach for the development of a hot crack-resistant metal-cored wire

    Holly, S., Schnitzer, R., Posch, G., Bruckner, J. & Presoly, P., 2017, In : Welding in the world. 61, p. 423 - 434

    Research output: Contribution to journalArticleResearchpeer-review

  245. Published

    Slag characterisation of 308L-type stainless steel rutile flux-cored wires

    Holly, S., Mayer, P. M., Bernhard, C. & Posch, G., 30 Nov 2018, In : Welding in the world.

    Research output: Contribution to journalArticleResearchpeer-review

  246. Published

    Investigation of the implications of the current conductive mold technology with respect to the internal and surface quality of ESR ingots

    Holzgruber, H., Scheriau, A., Knabl, M., Kubin, M., Korp, J. & Pierer, R., 2011, INTERNATIONAL SYMPOSIUM ON LIQUID METAL PROCESSING AND CASTING. p. 57-64

    Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

  247. Published
  248. Published

    Einfluss der Prozessparameter während der Nachspülphase auf die Konvertermetallurgie

    Hädicke, P., 2011, 97 p.

    Research output: ThesisMaster's ThesisResearch

  249. Published

    Modelling the dependence of sinter bed permeability on sinter porosity and structure

    Höftberger, A., Bhattacharyya, A., Schenk, J., Weiß, C., Schaffer, C. & Schuster, E., Jun 2018, Proceedings of ADMET 2018.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

  250. Published

    Möglichkeiten und Grenzen von Modellen zur Vorhersage der Auslaugbarkeit von Stahlwerksschlacken

    Höllen, D., Neuhold, S., Mudersbach, D., Schüler, S., Sommerauer, H., Griessacher, T., Dijkstra, J., van Zomeren, A., Presoly, P., Schenk, J. & Pomberger, R., 2017, Mineralische Nebenprodukte und Abfälle: Aschen, Schlacken, Stäube und Baurestmassen. Vol. 4. p. 205-222

    Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

  251. Published

    Results of Research into the Segregation Behaviour of Manganese, Silicon and Chromium in Continuous Casting

    Ilie, S., Presslinger, H., Reisinger, P., Mayr, M. & Etzelsdorfer, K., 2007, In : Steel research international. 78, p. 327-332

    Research output: Contribution to journalArticleResearchpeer-review

  252. Published

    Characterization of hot tear segregations in continuous casting of slabs

    Ilie, S., Reiter, J., Presslinger, H., Fluch, J. & Bernhard, C., 2008, 6th European Conference on Continuous Casting 2008. p. -Paper -122

    Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

  253. Published

    Bewertungsmethoden der Brammenmittenseigerung zur Steuerung des Stranggießens mit Soft Reduction

    Ilie, S., Presslinger, H., Schiefermüller, A., Pissenberger, A. & Reisinger, P., 2007, In : Berg- und hüttenmännische Monatshefte : BHM. 152, p. 227-231

    Research output: Contribution to journalArticleResearchpeer-review

  254. Published

    Results of research into the segregation behaviour of Manganese in continuous casting of steel

    Ilie, S., Presslinger, H., Reisinger, P., Mayr, M. & Etzelsdorfer, K., 2007, Results of research into the segregation behaviour of Manganese in continuous casting of steel. p. 315-327

    Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

  255. Published

    The formation of hot tear segregations in the continuous casting process

    Ilie, S., Reisinger, P., Bernhard, C. & Pierer, R., 2011, 3rd Chinese-German Metallurgy Seminar on Fundamentals of Iron and Steelmaking. p. Paper-10

    Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

  256. Published
  257. Published
  258. Published

    Fabrication of plain carbon steel/high chromium white cast iron bimetal by a liquid–solid composite casting process

    Javaheri, V., Rastegari, H. & Naseri Seftejani, M., Sep 2015, In : International Journal of Minerals, Metallurgy and Materials. p. 950-955 6 p.

    Research output: Contribution to journalArticleResearchpeer-review

  259. Published

    The Effect of Nb and Ti on Structure and Mechanical Properties of 12Ni-25Cr-0.4C Austenitic Heat-Resistant Steel after Aging at 900 °C for 1000 h

    Javaheri, V., Shahri, F., Mohammadnezhad, M., Tamizifar, M. & Naseri Seftejani, M., Oct 2014, In : Journal of Materials Engineering and Performance. 23, 10, p. 3558-3566 9 p.

    Research output: Contribution to journalArticleResearchpeer-review

  260. Published

    Investigating the effective factors on chromium-molybdenum steel shell liner fracture in SAG mill of Sarcheshmeh copper complex

    Javaheri, V., Rastegari, H. & Naseri Seftejani, M., 2015.

    Research output: Contribution to conferencePaperResearchpeer-review

  261. Published

    Verhalten der Spuren- und Begleitelemente in der LD-Stahlerzeugung

    Jungreithmeier, A., 2006

    Research output: ThesisDoctoral ThesisResearch

  262. Published

    Guest Editorial - EUROMAT 2017 Symposia on Processing

    Kaban, I., Agathopoulos, S., Valenza, F., Sommitsch, C., Schenk, J., Papaefthymiou, S. & Karantzalis, A., Oct 2018, In : Journal of Materials Engineering and Performance. 27.2018, 10, p. 4981-4982

    Research output: Contribution to journalEditorialResearchpeer-review

  263. Published

    Charakterisierung von Eisenerzträgern mittels Bildverarbeitung

    Kain - Bückner, B., Hanel, M. & Mali, H., 10 Sep 2015, Mitt. Österr. Miner. Ges..

    Research output: Chapter in Book/Report/Conference proceedingChapterResearch

  264. Published

    Image analysis for evaluation of iron ore carriers

    Kain-Bückner, B., Mali, H., Schenk, J., Hanel, M., Thaler, C., Stocker, H. & Hauzenberger, F., 2014, Sonderbände der Praktischen Metallographie 46. p. 215-218

    Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

  265. Published
  266. Published
  267. Published

    Interfacial Propperties in Metallurgy

    Karasangabo, A., 2009.

    Research output: Contribution to conferencePosterResearchpeer-review

  268. Published

    Aktuelle Situation und Perspektiven der Stahlindustrie in Afrika

    Karasangabo, A. & Grill-Kiefer, G., 1997, In : Stahl und Eisen. 117, p. 109-116

    Research output: Contribution to journalArticleResearchpeer-review

  269. Published

    Einfluss von Mo und N auf die Benetzungs- und Haftungsvorgänge beim Stranggießen von Stahl

    Karasangabo, A., 2007

    Research output: Book/ReportCommissioned reportTransferpeer-review

  270. Published

    Characterisation of raw materials for use in the FINEX process

    Karasangabo, A., Skorianz, M. & Thaler, C., 2010

    Research output: Book/ReportCommissioned reportTransferpeer-review

  271. Published

    Untersuchung des Benetzungsverhaltens ausgewählter binärer Fe-Legierungen auf Alumina Substraten

    Karasangabo, A., 2007

    Research output: Book/ReportCommissioned reportTransferpeer-review

  272. Published

    Castability of steels: role of the interfacial properties.

    Karasangabo, A., 2004.

    Research output: Contribution to conferencePosterResearchpeer-review

  273. Published
  274. Published
  275. Published

    Investigation of Alumina Wetting Fe-Ti, Fe-P and Fe-Ti-P Alloys

    Karasangabo, A. & Bernhard, C., 2012, In : Journal of adhesion science and technology. 26, p. 1141-1156

    Research output: Contribution to journalArticleResearchpeer-review

  276. Published
  277. Published
  278. Published

    Method and installation for the indirect reduction of particulate oxide-containing ores

    Kepplinger, W., Hauzenberger, F., Schenk, J. & Joo, S., 1 Nov 2005, Patent No. 10/312,811

    Research output: PatentResearch

  279. Published

    Verfahren zur Erhöhung der Eindringtiefe eines Sauerstoffstrahles

    Kepplinger, W., Plaul, J-F., Millner, R., Schenk, J., Wieder, K. & Wurm, J., 15 Jun 2013, Patent No. A 1422/2010

    Research output: PatentResearch

  280. Published

    Editorial

    Kepplinger, W. & Schenk, J., 1 Apr 2014, In : Steel research international. 85, 4, 1 p.

    Research output: Contribution to journalEditorialResearchpeer-review

  281. Published

    Effectiveness of improvised gas absorption techniques for emergency responders at releases of toxic gases

    Kern, H., Taferner, M. & Raupenstrauch, H., 2013, 2013 AIChE Spring Meeting & 9th Global Congress on Process Safety. p. 1-2

    Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

  282. Published
  283. Published

    Bestimmung der spezifischen elektrischen Leitfähigkeit von Schlacken des Systems CaF2-MgO-CaO

    Kienesberger, P. & Korp, J., 2006

    Research output: Book/ReportCommissioned reportTransferpeer-review

  284. Published
  285. Published
  286. Published

    Standardized Iron Ore Characterization Methodology for Metallurgy

    Kolb, F., Mali, H., Pichler, A. & Schenk, J., 2015, In : Practical metallography = Praktische Metallographie. 52, p. 5-20

    Research output: Contribution to journalArticleResearchpeer-review

  287. Published

    Comparison of Basic Oxygen Furnace Bottom Gas Purging Options

    Kollmann, T., Jandl, C., Schenk, J., Mizelli, H., Höfer, W., Viertauer, A. & Hiebler, M., 2012, In : RHI bulletin : the journal of refractory innovations. 1, p. 8-15

    Research output: Contribution to journalArticleResearchpeer-review

  288. Published

    Benchmark Analysis BOF Bottom Purging Final Report

    Kollmann, T., 2011

    Research output: Book/ReportCommissioned reportTransferpeer-review

  289. Published

    Gas Purging Benefits in the BOF: A Focus on Material Efficiency and CO2 Emission Reduction

    Kollmann, T., Bundschuh, P., Samm, V. & Kirschen, M., 4 May 2015, AISTech 2015 & ICSTI Proceedings. p. 2031 - 2040 10 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

  290. Published

    Gas Purging Benefits in the BOF: A Focus on Material Efficiency and CO2 Emission Reduction

    Kollmann, T., Bundschuh, P., Samm, V., Schenk, J. & Kirschen, M., 2015, In : RHI bulletin : the journal of refractory innovations. 1, p. 37-42 6 p.

    Research output: Contribution to journalArticleResearch

  291. Published

    Gas Purging Benefits in the BOF: A Focus on Material Efficiency and CO2 Emission Reduction

    Kollmann, T., Bundschuh, P., Samm, V., Schenk, J. & Kirschen, M., 17 Jun 2015, Procdeedings 2nd European Steel Technology and Application Days ESTAD. Düsseldorf, p. 1-7 7 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

  292. Published

    Influence of bottom purging on the metallurgical results and the BOF process

    Kollmann, T., 2010, 149 p.

    Research output: ThesisMaster's ThesisResearch

  293. Published

    Gas purging benefits in the BOF: A focus on material efficiency and CO2 emission reduction

    Kollmann, T., Bundschuh, P., Samm, V., Schenk, J. & Kirschen, M., 1 Jan 2015, AISTech 2015 - Proceedings of the Iron and Steel Technology Conference and ICSTI 2015. Vol. 2. p. 2031-2040 10 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

  294. Published

    Kornfeinung hochlegierter Stähle durch heterogene Keimbildung

    Koloszar, R., 2014

    Research output: ThesisMaster's ThesisResearch

  295. Published
  296. Published

    Herstellung hochreiner Stähle im Elektroschlacke Umschmelzprozess (ESU)

    Korp, J., 2004.

    Research output: Contribution to conferencePosterResearchpeer-review

  297. Published

    Determination of the specific electrical conductivity of ESR slags containing MgO

    Korp, J., Rabitsch, R. & Schneider, R., 2005, Proceedings of the 2005 International Symposium on Liquid Metal Processing and Casting. p. 163-171

    Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

  298. Published
  299. Published

    Electrical Conductivity of New MgO Containing ESR Slags and its Effect on Energy Consumption

    Korp, J., Schneider, R., Hasenhündl, R. & Presoly, P., 2007, Proceedings of the 16th Steelmaking Conference. p. 333-342

    Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

  300. Published

    Optimierung der Aufstickung mit Si3N4 in der DESU-Anlage

    Korp, J., 2001.

    Research output: Contribution to conferencePosterResearchpeer-review

  301. Published

    Beitrag zur experimentellen Bestimmung der spezifischen elektrischen Leitfähigkeit ausgewählter Binärschlackensysteme

    Korp, J., Krieger, W. & Schneider, R., 2006, Metallurgisches Kolloquium 2006. p. 0-0

    Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

  302. Published

    Überlegungen zu einer möglichen Gleichgewichtseinstellung beim Elektroschlacke Umschmelzen in geschlossenen Anlagen

    Korp, J., 2004, Proceedings of the 11th International Students Day of Metallurgy. p. 116-128

    Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

  303. Published
  304. Published

    Experimental investigations into surface crack formation under continuous casting conditions

    Krajewski, P., Pierer, R., Bernhard, C., Schaden, T. & Ilie, S., 2012, 5th International Congress on the Science and Technology of Steelmaking. p. Paper-1332

    Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

  305. Published

    A novel approach for the simulation of surface crack formation in continuous casting

    Krajewski, P., Krobath, R., Bernhard, C., Miettinen, J., Louhenkilpi, S., Ilie, S. & Schaden, T., 2014, In : Berg- und hüttenmännische Monatshefte : BHM. p. x-y

    Research output: Contribution to journalArticleResearchpeer-review

  306. Published

    A novel approach for the simulation of surface crack formation in continuous casting

    Krajewski, P., Krobath, R., Bernhard, C., Miettinen, J., Louhenkilpi, S., Ilie, S. & Schaden, T., 2014, Proceedings of the 8th European Continuous Casting Conference. p. x-y

    Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

  307. Published

    Oberflächenrissbildung beim Stranggießen von Stahl

    Krajewski, P., 2012.

    Research output: Contribution to conferencePosterResearchpeer-review

  308. Published

    Experimental simulation of crack formation of steels in the temperature range of second ductility through

    Krajewski, P. & Pierer, R., 2010.

    Research output: Contribution to conferencePosterResearchpeer-review

  309. Published

    Experimentelle Simulation der Oberflächenrissbildung

    Krajewski, P. & Krobath, R., 2014.

    Research output: Contribution to conferencePosterResearchpeer-review

  310. Published

    IMC-B – ein neuer Ansatz zur Untersuchung der Oberflächenrissbildung im Stranggießprozess

    Krajewski, P., Bernhard, C., Pierer, R., Schneller, F. & Schaden, T., 2013, In : Berg- und hüttenmännische Monatshefte : BHM. p. 108-115

    Research output: Contribution to journalArticleResearchpeer-review

  311. Published

    IMC-B - a new experimental method to predict the crack susceptiblity under continuous casting conditions

    Krajewski, P., Bernhard, C., Krobath, R., Schaden, T. & Ilie, S., 2014, 1st ESTAD &31st JSI. p. 184-185

    Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

  312. Published

    Experimentelle Simulation der Oberflächenrissbildung beim Stranggießprozess mit Hilfe des IMC-B Versuchs

    Krajewski, P., Bernhard, C., Krobath, R., Schaden, T. & Ilie, S., 2014, In : Berg- und hüttenmännische Monatshefte : BHM. 159, p. 304-305

    Research output: Contribution to journalArticleResearchpeer-review

  313. Published

    A novel Approach for the Simulation of Surface Crack Formation in Continuous Casting

    Krajewski, P., Krobath, R., Bernhard, C., Miettinen, J., Louhenkilpi, S., Ilie, S. & Schaden, T., Mar 2015, In : Berg- und hüttenmännische Monatshefte : BHM. 160, 3, p. 109-116 8 p.

    Research output: Contribution to journalArticleResearchpeer-review

  314. Published

    Segment Casting-an attractive alternative to ingot casting

    Krajewski, P., Michelic, S. & Riedler, M., 2016, Conference Proceedings to the 2nd Medovar Memorial Symposium.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

  315. Published
  316. Published

    Changing of scrap handling to increase the net value of Villares Metals

    Krapscha, C., 2014, 152 p.

    Research output: ThesisDiploma ThesisResearch

  317. Published

    Forschungsarbeiten am Lehrstuhl für Metallurgie der Montanuniversität Leoben

    Krieger, W., Bernhard, C., Gigacher, G., Korp, J. & Plaul, J. F., 2005, In : Berg- und hüttenmännische Monatshefte : BHM. p. 399-407

    Research output: Contribution to journalArticleResearchpeer-review

  318. Published

    Ermittlung eines Wärmebehandlungszyklus für Drehstabfedern der Spezialfahrzeugindustrie

    Krieger, W. & Zettl, K-M., 2006

    Research output: Book/ReportCommissioned reportTransferpeer-review

  319. Published
  320. Published

    Verhalten der Elemente Wasserstoff, Stickstoff und Sauerstoff im System Fe-Mn-Al-C-Si

    Krieger, W. & Pschera, R., 2006

    Research output: Book/ReportCommissioned reportTransferpeer-review

  321. Published

    Lehrstuhl für Metallurgie

    Krieger, W., Bernhard, C., Korp, J., Hasenhündl, R. & Wiener, J., 2006, In : Berg- und hüttenmännische Monatshefte : BHM. 151, p. 288-291

    Research output: Contribution to journalArticleResearchpeer-review

  322. Published

    Grundsätzliche Optionen zur Herstellung hochmanganhältiger Stähle

    Krieger, W., Krassnig, H-J., Pschera, R. & Zettl, K-M., 2006

    Research output: Book/ReportCommissioned reportTransferpeer-review

  323. Published

    Charakterisierung von Erstarrungsintervallen mittels DTA

    Krieger, W., Kienesberger, P., Penz, S. & Wöls, M., 2006

    Research output: Book/ReportCommissioned reportTransferpeer-review

  324. Published

    Simulation des Strangrichtens in einem In-Situ Biegeversuch

    Krobath, R., 19 May 2015.

    Research output: Contribution to conferencePosterResearchpeer-review

  325. Published

    A new method for the experimental simulation of surface crack formation in continuous casting

    Krobath, R., Bernhard, C., Ilie, S., Six, J. & Hahn, S., 1 Dec 2016.

    Research output: Contribution to conferencePresentationResearchpeer-review

  326. Published

    A New Experimental Setup for the Simulation of Surface Crack Formation in the Continuous Casting Process

    Krobath, R. & Bernhard, C., 8 May 2017, p. 1827 - 1837. 11 p.

    Research output: Contribution to conferencePaperResearchpeer-review

  327. Published

    A new method for the experimental simulation of surface crack formation in continuous casting

    Krobath, R., Bernhard, C., Ilie, S., Six, J. & Hahn, S., Apr 2017, In : Metallurgia Italiana. 1, 4, p. 5-13

    Research output: Contribution to journalArticleResearchpeer-review

  328. Published
  329. Published

    Untersuchungen zur Oberflächenrissbildung beim Stranggießen von Stahl

    Krobath, R., 2019

    Research output: ThesisDoctoral ThesisResearch

  330. Published
  331. Published

    Pool Profile Formation and Homogeneity of Remelted Ingots using the Electroslag Current Conductive Mold Technology

    Kubin, M., Korp, J. & Pierer, R., 2011.

    Research output: Contribution to conferencePosterResearchpeer-review

  332. Published
  333. Published
  334. Published

    Bestimmung und Bedeutung der Randbedingungen für die Simulation von Stranggießprozessen.

    Lechner, M., Reiter, J., Bernhard, C., Forsthuber, M. & Zach, O., 2004, In : Berg- und hüttenmännische Monatshefte : BHM. 149, p. 101-106

    Research output: Contribution to journalArticleResearchpeer-review

  335. Published

    Extraktion als Werkzeug zur dreidimensionalen Einschlusscharakterisierung

    Lederhaas, B. & Michelic, S., 2011.

    Research output: Contribution to conferencePosterResearchpeer-review

  336. Published

    The influence of manganese on the initial solidification of near-peritectic steel

    Legerer, C., 2016

    Research output: ThesisMaster's ThesisResearch

  337. Published

    Thermo-Mechanical Properties of an Fe–Mn–Si–Cr–Ni–VC Shape Memory Alloy with Low Transformation Temperature

    Leinenbach, C., Kramer, H., Bernhard, C. & Eifler, D., 2011, In : Advanced Engineering Materials.

    Research output: Contribution to journalArticleResearchpeer-review

  338. Published
  339. Published

    Ein Studium über die Krustenbildung im Meniskus in der Kokille beim Stranggießen

    Li, T., 2019

    Research output: ThesisMaster's ThesisResearch

  340. Published

    Experimental Simulation of the Solidification of Steel at Higher Cooling Rates

    Linzer, B., Hohenbichler, G., Bragin, S., Arth, G. & Bernhard, C., 2009, In : Berg- und hüttenmännische Monatshefte : BHM. 154, p. 498-503

    Research output: Contribution to journalArticleResearchpeer-review

  341. Published

    Experimentelle Simulation von gegossenen Dünnbändern.

    Linzer, B., Bernhard, C. & Hohenbichler, G., 2004, In : Berg- und hüttenmännische Monatshefte : BHM. 149, p. 107-111

    Research output: Contribution to journalArticleResearchpeer-review

  342. Published

    Influence of thin slab thickness on final strip property in Arvedi ESP plant

    Linzer, B., Watzinger, J., Bragin, S., Bernhard, C. & Bianchi, A., 2014, 8th European Continuous Casting Conference. p. 1-8

    Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

  343. Published

    Experimental Simulation of the Solidification of Steel at Higher Cooling Rate

    Linzer, B., Hohenbichler, G., Bragin, S., Arth, G. & Bernhard, C., 2009, 3rd International Conference on Simulation and Modelling of Metallurgical Processes in Steelmaking (Steelsim 2009). p. Paper -CC17

    Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

  344. Published

    Dünnbandgießen von Kohlenstoff-Stählen

    Linzer, B., 2007, 211 p.

    Research output: ThesisDoctoral ThesisResearch

  345. Published

    Technologies for Low Carbon Fe-Mn-Si-Al TWIP Steel Smelting

    Liu, J., Liu, H. & Michelic, S., 12 May 2015.

    Research output: Contribution to conferencePosterResearch

  346. Published

    In situ observation of acicular ferrite formation using HT-LSCM: possibilities, challenges and influencing factors

    Loder, D., Michelic, S., Mayerhofer, A., Bernhard, C. & Dippenaar, R., 2014, Proceedings of MS&T14 . p. 469-476

    Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

  347. Published

    The Use of HT-LSCM for the In Situ Observation of Acicular Ferrite

    Loder, D., Michelic, S. & Bernhard, C., 2014.

    Research output: Contribution to conferencePosterResearch

  348. Published

    Experimentelle Analyse des Verhaltens oxidischer Einschlüsse im System CaO-Al2O3-MgO

    Loder, D., 2011, Proc. of 18th International Student’s Day of Metallurgy. p. von-bis

    Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

  349. Published

    Charakterisierung von nichtmetallischen Einschlüssen in Titan legierten ferritischen Chromstählen

    Loder, D., Michelic, S., Reip, T. & Bernhard, C., 2012.

    Research output: Contribution to conferencePosterResearchpeer-review

  350. Published
  351. Published

    Characterization of acicular ferrite microstructures using etching methods, optical microscopy and HT-LSCM

    Loder, D., Michelic, S. & Bernhard, C., 2014, Sonderbände der praktischen Metallographie - Fortschritte in der Metallographie. p. 125-130

    Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

  352. Published

    Systematische Optimierung von Stahleigenschaften durch nichtmetallische Einschlüsse

    Loder, D., Michelic, S. & Bernhard, C., 2013.

    Research output: Contribution to conferencePosterResearch

  353. Published

    Specific use of non-metallic inclusions for the formation of acicular ferrite structures: thermodynamic modeling and laboratory experiments

    Loder, D. & Michelic, S., 2015, Proceedings of 9th International Conference on Clean Steel.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

  354. E-pub ahead of print

    Systematic investigation of acicular ferrite formation on laboratory scale

    Loder, D. & Michelic, S., 6 Apr 2016, In : Materials science and technology. 10 p.

    Research output: Contribution to journalArticleResearchpeer-review

  355. Published

    On the formation potential of acicular ferrite microstructure in different steel grades focusing on the influence of carbon content

    Loder, D., Mayerhofer, A. & Michelic, S., 2016, Proceedings AISTech 2016. p. 2465-2474

    Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

  356. Published

    Systematische Untersuchung der Azikularferritbildung in Stählen

    Loder, D., Michelic, S. & Bernhard, C., 11 Jul 2016, In : Berg- und hüttenmännische Monatshefte : BHM. 161, 7, p. 315-320

    Research output: Contribution to journalArticleResearchpeer-review

  357. Published

    Systematische Untersuchung der Azikularferritbildung in Stählen

    Loder, D., 10 May 2016.

    Research output: Contribution to conferencePresentationResearch

  358. Published

    Acicular Ferrite Formation and Its Influencing Factors - A Review

    Loder, D., Michelic, S. & Bernhard, C., Jan 2017, In : Journal of Materials Science Research. 6, 1, p. 24-43

    Research output: Contribution to journalArticleResearchpeer-review

  359. Published
  360. Published

    On the systematic investigation of acicular ferrite on laboratory scale

    Loder, D., 2016

    Research output: ThesisDoctoral ThesisResearch

  361. Published
  362. Published

    Application of Thermodynamic and Kinetic Model for Converter Steelmaking to Optimize Manganese Yield in Crude Steel

    Lytvynyuk, Y., Schenk, J., Hiebler, M., Mizelli, H. & Sormann, A., 2013, In : Berg- und hüttenmännische Monatshefte : BHM. p. 457-458

    Research output: Contribution to journalArticleResearchpeer-review

  363. Published

    Thermodynamic and Kinetic Model of the Converter Steelmaking Process. Part 1: The Description of the BOF Model

    Lytvynyuk, Y., Schenk, J., Hiebler, M. & Sormann, A., 2014, In : Steel research international. 85, p. 537-543

    Research output: Contribution to journalArticleResearchpeer-review

  364. Published
  365. Published
  366. Published

    Thermodynamic and Kinetic Simulation of the Manganese Ore Addition in the Steelmaking Converter

    Lytvynyuk, Y., Schenk, J., Hiebler, M. & Mizelli, H., 2012, Asia Steel 2012. p. 49-49

    Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

  367. Published

    Thermodynamic and Kinetic Modelling of the Devan adization Process in the Steelmaking Converter

    Lytvynyuk, Y., Schenk, J., Hiebler, M. & Mizelli, H., 2011, 6th European Oxygen Steelmaking Conference 2011 (EOSC 2011). p. 657-664

    Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

  368. Published

    Thermodynamic and Kinetic Model of the Converter Steelmaking Process. Part 2: The Model Validation

    Lytvynyuk, Y., Schenk, J., Hiebler, M. & Sormann, A., 2014, In : Steel research international. 85, p. 544-563

    Research output: Contribution to journalArticleResearchpeer-review

  369. Published

    Thermodynamic and kinetic modeling of metallurgical reactions

    Lytvynyuk, Y., 2013, 129 p.

    Research output: ThesisDoctoral ThesisResearch

  370. Published

    Einstellung des Phosphorgehaltes durch gezielte Nachbehandlung am Konverter

    Mairhofer, S. M., 2017

    Research output: ThesisMaster's ThesisResearch

  371. Published
  372. Published
  373. Published
  374. Published
  375. Published
  376. Published
  377. Published
  378. Published

    Analyse von Fe,Mn-Oxiden mittels REM/EDX: Bringt die elektrolytische Extraktion was sie verspricht

    Mayerhofer, A., Michelic, S. K. & Bernhard, C., 18 Sep 2019, p. 181-186. 6 p.

    Research output: Contribution to conferencePaperResearchpeer-review

  379. Published

    Analyse von Fe,Mn-Oxiden mittels REM/EDX: Bringt die elektrolytische Extraktion was sie verspricht?

    Mayerhofer, A., 18 Sep 2019.

    Research output: Contribution to conferencePosterResearchpeer-review

  380. Published

    Atom probe investigations in low carbon steel on Arvedi endless strip production line

    Mendez Martin, F. & Bragin, S., 2014.

    Research output: Contribution to conferencePosterResearchpeer-review

  381. Published

    Erstellung eines numerischen Modells der CC2 - Teil I

    Michelic, S., 2007

    Research output: Book/ReportCommissioned reportTransferpeer-review

  382. Published

    Consideration of electromagnetic stirring in a simple thermal model of the continuous casting process

    Michelic, S., 2006

    Research output: Book/ReportCommissioned reportTransferpeer-review

  383. Published

    Polydimensional modelling of dendritic growth and microsegregation in multicomponent alloys

    Michelic, S., Thuswaldner, J. & Bernhard, C., 2010, In : Acta materialia. 58, p. 2738-2751

    Research output: Contribution to journalArticleResearchpeer-review

  384. Published

    Inclusion Metallurgy

    Michelic, S., 2012.

    Research output: Contribution to conferencePosterResearchpeer-review

  385. Published
  386. Published

    Bestimmung von Wärmeüberganskoeffizienten anhand eines in einem Pressstempel aufgezeichneten Temperaturverlaufs

    Michelic, S., 2007

    Research output: Book/ReportCommissioned reportTransferpeer-review

  387. Published
  388. Published

    Experimental study on the formation of non-metallic inclusions acting as nuclei for acicular ferrite in HSLA steels through specific deoxidation practice and defined cooling conditions

    Michelic, S., Loder, D., Arth, G. & Bernhard, C., 2014, Materials Science Forum: Proceedings THERMEC 2013. Vol. 783-786. p. 1079-1084

    Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

  389. Published

    Steeluniversity.org – An Interactive E-Learning Resource on Steel Processing Technologies

    Michelic, S. & Bernhard, C., 2006, Proceedings des 13. Internationalen Studententags der Metallurgie. ASMET, p. 117-127

    Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

  390. Published

    Kombinierter Einsatz analytischer und statistischer Methoden zur quantitativen und qualitativen Bestimmung des Reinheitsgrads von Stählen

    Michelic, S., Hartl, M., Wieser, G. & Bernhard, C., 2010, Kombinierter Einsatz analytischer und statistischer Methoden zur quantitativen und qualitativen Bestimmung des Reinheitsgrads von Stählen. Werkstoff-Informationsges., p. 359-364

    Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

  391. Published

    Modelling Solidification in Continuous Casting: Algorithms and Boundary Conditions

    Michelic, S., Bernhard, C., Rauter, W., Erker, M. & Sormann, A., 2009, Modelling Solidification in Continuous Casting: Algorithms and Boundary Conditions. ASMET, p. 1-8

    Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

  392. Published

    Determination of Decisive Factors Influencing the Inclusion Landscape in Electroslag Remelted Ingots

    Michelic, S., Tanzer, R., Schützenhöfer, W. & Bernhard, C., 2012, Proceedings of the 1st International Conference on Ingot Casting, Rolling and Forging. p. 1-10

    Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

  393. Published

    Interactions of non-metallic inclusions with steel and slag: Thermodynamic modeling, experiments and metallographic analyses

    Michelic, S., Hartl, M. & Bernhard, C., 2011, EPD Congress 2011. p. 723-730

    Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

  394. Published

    Thermodynamic and Experimental Study on the Modification of Non-Metallic Inclusions Through Contact with CaO-Al2O3-MgO Slags

    Michelic, S., Bernhard, C. & Hartl, M., 2011, AIST Proceedings 2011. p. 617-626

    Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

  395. Published

    Application of Inverse Thermal Modelling to the SSCT-Test

    Michelic, S., 2005, Seminar "New materials, new technologies and new energetic resources for the 21st century". p. 23-23

    Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

  396. Published

    Critical evaluation of prospects and limitations of steel cleanness characterisation using automated SEM/EDS analysis

    Michelic, S., Bernhard, C., Wieser, G. & Lederhaas, B., 2012, Proceedings of the 8th International Conference on Clean Steel. p. 1-11

    Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

  397. Published

    Numerische Simulation von Gießprozessen

    Michelic, S., 2009.

    Research output: Contribution to conferencePosterResearchpeer-review

  398. Published

    Inclusion Removal and Modification in Remelting Processes with Special Regard to Inclusion Dissolution in CaO-Al2O3-CaF2 Slags

    Michelic, S., Schider, S. & Bernhard, C., 2013,

    INTECO Melting, Refining, Casting & Remelting Symposium 2013 - Proceedings

    .
    p. 172-184

    Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

  399. Published

    Thermal Modelling of a Continuous Casting Machine

    Michelic, S., 2005, 12. International Students Day of Metallurgy. p. 61-69

    Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

  400. Published

    Development, implementation and verification of a transient numeric solidification model of a continuous bloom caster at Voestalpine Stahl Donawitz

    Michelic, S., Bernhard, C., Rauter, W., Erker, M., Brandl, W. & Sormann, A., 2011, 7th European Continuous Casting Conference. p. Paper-02

    Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

  401. Published

    Evaluation of Solution Algorithms for Modelling Solidification Processes

    Michelic, S., 2008.

    Research output: Contribution to conferencePosterResearchpeer-review

  402. Published

    Characterization of TiN, TiC and Ti(C,N) in titanium-alloyed ferritic chromium steels focusing on the significance of different particle morphologies

    Michelic, S., Loder, D., Reip, T., Ardehali Barani, A. & Bernhard, C., 2015, In : Materials characterization. 100, p. 61-67

    Research output: Contribution to journalArticleResearchpeer-review

  403. Published

    Influence of Electromagnetic Stirring on the Amount of Equiaxed Solidification during Continuous Casting

    Michelic, S., 2007.

    Research output: Contribution to conferencePosterResearchpeer-review

  404. Published

    Forschungsaktivitäten in den Jahren 2004-2006 Modul 1b

    Michelic, S., 2006

    Research output: Book/ReportCommissioned reportTransferpeer-review

  405. Published

    Heat Transfer in a Round CC Mould: Measurement, Modelling and Validation

    Michelic, S., Rauter, W., Erker, M., Brandl, W. & Bernhard, C., 2008, 6th European Continuous Casting Conference. Associazione Italiana di Metallurgia, p. Paper-30

    Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

  406. Published

    Experimental study on the influence of the Ti/Al ratio and different addition practices on the inclusion landscape in ULC steels

    Michelic, S., Xia, G. & Bernhard, C., 2012, Proceedings of the ASIA Steel International Conference 2012. p. 1-6

    Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

  407. Published

    Reinheitsgrad beim ESU-Prozess

    Michelic, S., 2009.

    Research output: Contribution to conferencePosterResearchpeer-review

  408. Published

    Numeric Modelling of the Heat Transfer in the Continuous Casting Mould

    Michelic, S., Bernhard, C. & Pierer, R., 2007, Numeric Modelling of the Heat Transfer in the Continuous Casting Mould. p. 209-215

    Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

  409. Published

    Modification of non-metallic inclusions in the ESR process by steel-slag interaction: Thermodynamic and experimental considerations

    Michelic, S., Tanzer, R., Schützenhöfer, W. & Bernhard, C., 2011, Proceedings of the 2011 International Symposium on Liquid Metal Processing and Casting. p. 81-88

    Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

  410. Published

    On the Interrelation of Heat Withdrawal and Crack Formation in the Continuous Casting Mould

    Michelic, S., Bernhard, C., Rauter, W. & Sormann, A., 2008, ICASP-2 Second International Conference on Advances in Solidification Processes. ASMET, p. 7-7

    Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

  411. Published

    A modified cellular automaton method for polydimensional modelling of dendritic growth and microsegregation in multicomponent alloys

    Michelic, S., Thuswaldner, J. & Bernhard, C., 2012, IOP Conf. Series: Materials Science and Engineering. p. 1-9

    Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

  412. Published

    On the Solution of Complex Transient Heat Transfer Problems - Part I

    Michelic, S., 2007

    Research output: Book/ReportCommissioned reportTransferpeer-review

  413. Published

    Clogging - Intensiv beforscht, viel diskutiert, erfolgreich gelöst?

    Michelic, S., 13 Apr 2015.

    Research output: Contribution to conferencePresentationResearch

  414. Published
  415. Published
  416. Published

    In-situ observation of the behavior of non-metallic inclusions at different interfaces in the system steel-slag-refractory

    Michelic, S., Dieguez Salgado, U. & Bernhard, C., 21 Sep 2015, LMPC 2015: Proceedings of the 2015 International Symposium on Liquid Metal Processing and Casting. p. 143-152 10 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

  417. Published

    Production of Jumbo Blooms by Semi-Continuous Casting: Challenges, Feasibility and Future Potential

    Michelic, S. & Riedler, M., 23 Sep 2015, Proceedings of the 2015 International Symposium on Liquid Metal Processing and Casting.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

  418. Published
  419. Published

    Production of Jumbo Blooms by Semi-Continuous Casting: Challenges, Feasibility and Future Potential

    Michelic, S. & Riedler, M., 2016, In : Berg- und hüttenmännische Monatshefte : BHM. 5, p. 39-44

    Research output: Contribution to journalArticleResearchpeer-review

  420. Published

    Solidification Modeling on Bloom Casters - Different Methods of Result Verification and Their Application

    Michelic, S., Pierer, R. & Riedler, M., 2014.

    Research output: Contribution to conferencePresentationResearch

  421. Published
  422. Published
  423. Published
  424. Published
  425. Published
  426. Published

    Experimental Study on the Behavior of TiN and Ti2O3 Inclusions in Contact with CaO-Al2O3-SiO2-MgO Slags

    Michelic, S. K. & Bernhard, C., 2017, In : Scanning.

    Research output: Contribution to journalArticleResearchpeer-review

  427. Published

    In-situ observation of non-metallic inclusions in the system steel-slag-refractory: Set-up, limitations and results

    Michelic, S. K., Dieguez Salgado, U. & Bernhard, C., 11 Mar 2019.

    Research output: Contribution to conferencePresentationResearchpeer-review

  428. Published

    A geological excursion to the mining areas of South Africa

    Mogessie, A., Hauzenberger, C., Raic, S., Melcher, F., Prochaska, W., Mali, H., Binder, H., Dietmayer-Kräutler, M., Friedam, F. C., Haas, M., Hampl, F., Hanke, G. E., Hasenburger, W., Kaltenböck, H., Onuk, P., Pamsl, A., Pongratz, K., Schifko, T., Schilli, S., Schwabl, S., Tauchner, C., Wallner, D., Hentschke, J., Gauert, C., Schantl, P., Belohlavek, L., Ciriello, A., Daghighi, D., Fercher, B., Goetschl, K., Graber, H., Mandl, M., Preissegger, V., Raab, G., Rauschenbusch, F., Sattler, T. M., Schorn, S., Simic, K., Wedenig, M. & Wiesmair, S., 2015, In : Mitteilungen der Österreichischen Mineralogischen Gesellschaft. 161, p. 175-219

    Research output: Contribution to journalArticleTransfer

  429. Published

    Abrasiveness of mining slurries: influence of the morphology, concentration of slurries, mean grain size and nature of the abrasive particles

    Moreira, V. E. S., Silva, F. C., Quintao, V. M., Siqueira, F., Kaelber, F., Meinhold, S., Schenk, J. & Rodrigues da Costa, A., 3 Dec 2018.

    Research output: Contribution to conferencePaperResearchpeer-review

  430. Published

    Utilization of metallurgical slag with presence of novel CaO-MgO-SiO2-Al2O3 as a composite sorbent for wastewater treatment contaminated by cerium

    Morozova, A. G., Lonzinger, T. M., Skotnikov, V. A., Sahu, J. N., Mikhailov, G. G., Schenk, J., Bhattacharyya, A. & Kapelyushin, Y., 10 May 2020, In : Journal of Cleaner Production. 255, 120286.

    Research output: Contribution to journalArticleResearchpeer-review

  431. Published

    Fundamentals of hydrogen plasma smelting reduction (HPSR) of iron oxides, a new generation of steelmaking processes

    Naseri Seftejani, M. & Schenk, J., 6 Feb 2018.

    Research output: Contribution to conferencePaperResearchpeer-review

  432. Published

    Kinetics of molten iron oxides reduction using hydrogen

    Naseri Seftejani, M. & Schenk, J., Jul 2018, In : Metallurgia Italiana. n. 7/8 2018, 0026-0843, p. 5-14 10 p.

    Research output: Contribution to journalArticleResearchpeer-review

  433. Published

    Thermodynamic of Liquid Iron Ore Reduction by Hydrogen Thermal Plasma

    Naseri Seftejani, M. & Schenk, J., 11 Dec 2018, In : Metals : open access journal . 8, 12, 17 p.

    Research output: Contribution to journalArticleResearchpeer-review

  434. Published

    Transport Properties of HPSR Gases

    Naseri Seftejani, M. & Schenk, J., 24 Oct 2018, The Chinese Society for Metals.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

  435. Published

    THERMODYNAMIC ASPECTS OF HYDROGEN PLASMA SMELTING REDUCTION OF IRON OXIDES

    Naseri Seftejani, M. & Schenk, J., 20 Sep 2018, Austrian Society for Metallurgy and Materials: ASMET. ASMET

    Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

  436. Published

    Reduction of Haematite Using Hydrogen Thermal Plasma

    Naseri Seftejani, M., Schenk, J. & Zarl, M. A., 16 May 2019, In : Materials. 12.2019, 10, 22 p., 1608.

    Research output: Contribution to journalArticleResearchpeer-review

  437. Published

    Slag Formation during Reduction of Iron Oxide Using Hydrogen Plasma Smelting Reduction

    Naseri Seftejani, M., Schenk, J., Spreitzer, D. & Zarl, M. A., 20 Feb 2020, In : Materials. 13.2020, 4, 24 p., 935.

    Research output: Contribution to journalArticleResearchpeer-review

  438. Published

    Freisetzungsbestimmende Mechanismen von Schwermetallen in Stahlwerksschlacken - Analyse, Modellierung, Synthesen

    Neuhold, S. F., Vollprecht, D., Presoly, P., Schenk, J. & Adamczyk, B., 7 Nov 2018, Recy & DepoTech 2018: Vorträge-Konferenzband. Leoben, p. 135-140 122

    Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

  439. Published

    Minimising the leaching of V and Cr from electric arc furnace slags by decreasing the FeO/SiO2 ratio

    Neuhold, S. F., Höllen, D., Presoly, P., Adamczyk, B., Drissen, P., van Zomeren, A., Schüler, S. & Mudersbach, D., Apr 2019, Proceedings of the 6th Internation Slag Valorisation Symposium: Science, Innovation & Entrepreneurship in Pursuit of a Sustainable World. Malfiet, A., Peys, A. & Di Maria, A. (eds.). Mechelen, Vol. 6. p. 175-178

    Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

  440. Published

    Tailoring the FeO/SiO2 Ratio in Electric Arc Furnace Slags to Minimize the Leaching of Vanadium and Chromium

    Neuhold, S. F., Algermissen, D., Drissen, P., Adamczyk, B., Presoly, P., Sedlazeck, K. P., Schenk, J., Raith, J., Pomberger, R. & Vollprecht, D., 8 Apr 2020, In : Applied Sciences. 10.2020, 7, p. 5249 17 p.

    Research output: Contribution to journalArticleResearchpeer-review

  441. Published

    Einfluss der Konvertergeometrie auf die Metallurgie des LD Prozesses

    Ortner, M., 2010, 121 p.

    Research output: ThesisMaster's ThesisResearch

  442. Published

    Ätzmethoden für die computergestützte Analyse von Azikularferrit im Gefüge

    Otto, C., Loder, D., Michelic, S. & Bernhard, C., 2014.

    Research output: Contribution to conferencePosterResearch

  443. Published

    Untersuchung des Gießverhaltens peritektischer Stähle mit Hilfe des Kokillenmonitors

    Panhofer, H., 2011, 114 p.

    Research output: ThesisMaster's ThesisResearch

  444. Published

    Bestimmung von Kriterien zur Beurteilung der Sinterqualität

    Pankratz, C., 2016

    Research output: ThesisMaster's ThesisResearch

  445. Published

    Verhalten von Koks unter hochofenähnlichen Bedingungen

    Paul, A., 2013

    Research output: ThesisMaster's ThesisResearch

  446. Published

    Reduction of iron ore fines with CO-rich gases under pressurized fluidized bed conditions

    Pawlik, C., Schuster, S., Eder, N., Winter, F., Mali, H., Fischer, H. & Schenk, J. L., 2007, In : ISIJ international. 47, 2, p. 217-225

    Research output: Contribution to journalArticleResearchpeer-review

  447. Published

    Characterization of the Reduction of Iron Ore Fines with CO-rich Gases under Pressurized Fluidized Bed Conditions

    Pawlik, C., Eder, N., Thurnhofer, A., Winter, F., Mali, H., Fischer, H. & Schenk, J., 2005, Proceeding IFSA. p. 89-93

    Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

  448. Published

    Prediction of Inclusion Types for different Production Routes of Stainless Steels

    Penz, S., 2007

    Research output: Book/ReportCommissioned reportTransferpeer-review

  449. Published

    Characterisation of Nonmetallic Inclusions by Automated SEM/EDX Analyses

    Penz, S., 2008.

    Research output: Contribution to conferencePosterResearchpeer-review

  450. Published

    Representativeness of Automated SEM/EDX Analyses for Inclusion Characterisation

    Penz, S., 2008.

    Research output: Contribution to conferencePosterResearchpeer-review

  451. Published

    Improvement of the Characterisation of Nonmetallic Inclusions Especially Focusing on High Purity Steels

    Penz, S., 2008.

    Research output: Contribution to conferencePosterResearchpeer-review

  452. Published

    Reaktionsorte und Abscheidungsmechanismen nichtmetallischer Einschlüsse beim ESU-Verfahren

    Penz, S., 2008

    Research output: Book/ReportCommissioned reportTransferpeer-review

  453. Published

    Analyse der Einschlusslandschaft von hochlegierten Stählen vor und nach dem Umschmelzen - Zwischenbericht

    Penz, S., 2008

    Research output: Book/ReportCommissioned reportTransferpeer-review

  454. Published

    Thermodynamische Modellierung der Schlackenfahrweise in der Sekundärmetallurgie

    Penz, F., Bundschuh, P., Griessacher, T. & Schenk, J., 13 Oct 2016, Schlacken-Symposium 2016: Kreislaufwirtschaft stabil weiter entwickeln. p. 153-166 14 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

  455. Published

    Effect of Scrap Composition on the Thermodynamics and Kinetic Modelling of BOF Converter

    Penz, F. M., Bundschuh, P., Schenk, J., Pastucha, K., Panhofer, H. & Paul, A., 11 Jun 2017, p. 1-10. 10 p.

    Research output: Contribution to conferencePaperResearchpeer-review

  456. Published

    Untersuchung von Erstarrungsphänomenen im Blockguss

    Penz, F., 2015

    Research output: ThesisMaster's ThesisResearch

  457. Published
  458. Published
  459. Published

    DISSOLUTION BEHAVIOUR OF ULC STEEL IN CARBON SATURATED HOT METAL

    Penz, F. M., Schenk, J., Ammer, R., Pastucha, K. & Maunz, B., 13 Jun 2018, p. ICS070. 12 p.

    Research output: Contribution to conferencePaperResearchpeer-review

  460. Published

    Dissolution of Scrap in Hot Metal under Linz-Donawitz (LD) Steelmaking Conditions

    Penz, F. M., Schenk, J., Ammer, R., Kloesch, G. & Pastucha, K., Dec 2018, In : Metals : open access journal . 8.2018, 1078, 9 p., 1078.

    Research output: Contribution to journalArticleResearchpeer-review

  461. Published

    A Review of Steel Scrap Melting in Molten Iron-Carbon Melts

    Penz, F. M. & Schenk, J., 1 Jan 2019, In : Steel research international. 2019, 20 p., 1900124.

    Research output: Contribution to journalReview articleResearchpeer-review

  462. Published

    Diffusive steel scrap melting in carbon-saturated hot metal-Phenomenological investigation at the solid-liquid interface

    Penz, F. M., Schenk, J., Ammer, R., Klösch, G., Pastucha, K. & Reischl, M., 1 Jan 2019, In : Materials. 12.2019, 8, 1358.

    Research output: Contribution to journalArticleResearchpeer-review

  463. Published

    Analytical and numerical determination of the heat transfer coefficient between scrap and hot metal based on small-scale experiments

    Penz, F. M., Tavares, R. P., Weiss, C., Schenk, J., Ammer, R., Pastucha, K. & Klösch, G., 24 Apr 2019, In : International journal of heat and mass transfer. 138.2019, August, p. 640-646 7 p.

    Research output: Contribution to journalArticleResearchpeer-review

  464. Published

    Evaluation of the Influences of Scrap Melting and Dissolution during Dynamic Linz–Donawitz (LD) Converter Modelling

    Penz, F. M., Schenk, J., Ammer, R., Kloesch, G. & Pastucha, K., Apr 2019, In : Processes : open access journal. 7.2019, 4

    Research output: Contribution to journalArticleResearchpeer-review

  465. Published
  466. Published

    Dissolution behaviour of ULC steel in carbon saturated hot metal

    Penz, F., Schenk, J., Ammer, R., Pastucha, K. & Maunz, B., 2018, In : Metallurgia Italiana. 110, 11-12, p. 36 45 p.

    Research output: Contribution to journalArticleResearchpeer-review

  467. Published

    Influence of heat treatment on the microstructure and toughness of din 1.2083 - type plastic mould steels

    Perko, J., Leitner, H., Strobl, V., Schneider, R. & List, M., 2009, Proceedings of the 8th International Tooling Conference. p. 597-609

    Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

  468. Published

    Process behaviour of fine iron ores during reduction in a fluidized bed reactor and characterization of the morphological evolution

    Pichler, A., 2014,

    Proceedings of the 1st ESTAD & 31 JSI Conference

    .
    p. 100-102

    Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

  469. Published

    Influence of alkalis on mechanical properties of lumpy iron carriers during reduction

    Pichler, A., Schenk, J., Hanel, M., Mali, H., Thaler, C., Hauzenberger, F. & Stocker, H., 2014, Conference Proceedings to the 23rd International Conference on Metallurgy and Materials. p. 40-40

    Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

  470. Published

    Analyse- und Untersuchungsmethoden zur Charakterisierung der Eigenschaften von Hüttenkoks für moderne Hochöfen

    Pichler, A. & Feichtinger, S., 2011, Proc. of 18th International Student’s Day of Metallurgy. p. von-bis

    Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

  471. Published

    Influence of slag properties on the alkali-cycle of a blast furnace

    Pichler, A., Schenk, J., Hauzenberger, F., Stocker, H. & Thaler, C., 16 May 2016, Proceedings of the AISTech 2016. p. 341-352

    Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

  472. Published

    ANALYSIS OF THE ALKALI DISTRIBUTION IN IRONMAKING REACTORS BY THERMOCHEMICAL MODELLING

    Pichler, A., Schenk, J., Hauzenberger, F., Stocker, H. & Thaler, C., Sep 2016, 7TH EUROPEAN COKE AND IRONMAKING CONGRESS - ECIC 2016, Proceedings.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

  473. Published
  474. Published
  475. Published
  476. Published

    Thermochemical modelling of the alkali balance in modern blast furnaces

    Pichler, A., Schenk, J., Hauzenberger, F., Thaler, C. & Stocker, H., 2015, ASIA Steel International Conference 2015 - Proceedings. 7A-7: Iron and Steel Institute of Japan

    Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

  477. Published

    Charakterisierung Heißrissbildung

    Pierer, R., 2009.

    Research output: Contribution to conferencePosterResearchpeer-review

  478. Published

    Evaluation of common constitutive equations for solidifying steel

    Pierer, R., Bernhard, C. & Chimani, C., 2005, In : Berg- und hüttenmännische Monatshefte : BHM. 150, p. 163-169

    Research output: Contribution to journalArticleResearchpeer-review

  479. Published

    The behaviour of two new tool steels regarding dimensional change

    Pierer, R., Schneider, R. & Hiebler, H., 2002, The behaviour of two new tool steels regarding dimensional change. p. 507-517

    Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

  480. Published

    A Hot Tearing Criterion for the Continuous Casting Process

    Pierer, R., Michelic, S., Bernhard, C. & Chimani, C., 2007, A Hot Tearing Criterion for the Continuous Casting Process. Steel Institute VDEh, p. 893-900

    Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

  481. Published

    A Contribution to Hot Tearing in the Continuous Casting Process

    Pierer, R., Bernhard, C. & Chimani, C., 2006, International ATS Steelmaking Conference. Ed. de la Revue de Métallurgie, p. 1-3

    Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

  482. Published

    Heißrissbildung – Theorie und Kriterien

    Pierer, R., 2006

    Research output: Book/ReportCommissioned reportTransferpeer-review

  483. Published

    The Nature of Internal Defects in Continuously Cast Steel and their Impact on Final Product Quality

    Pierer, R. & Bernhard, C., 2010, AIST Proceedings 2010. p. 193-203

    Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

  484. Published

    On the influence of carbon on secondary dendrite arm spacing in steel

    Pierer, R. & Bernhard, C., 2008, In : Journal of materials science. p. 6938-6943

    Research output: Contribution to journalArticleResearchpeer-review

  485. Published

    High Temperature Behavior during Solidification of Peritectic Steels under Continuous Casting Conditions

    Pierer, R. & Bernhard, C., 2006, High Temperature Behavior during Solidification of Peritectic Steels under Continuous Casting Conditions. p. 793-803

    Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

  486. Published

    Bestimmung der kritischen Dehnung der Heißrissbildung an Kohlenstoffstählen

    Pierer, R., 2007

    Research output: Book/ReportCommissioned reportTransferpeer-review

  487. Published

    Über die Bildung von Heißrissseigerungen in Stahl: Metallographische Analyse und Charakterisierung

    Pierer, R., Griesser, S., Reiter, J. & Bernhard, C., 2009, In : Berg- und hüttenmännische Monatshefte : BHM. 154, p. 346-353

    Research output: Contribution to journalArticleResearchpeer-review

  488. Published

    Heißrissbildungsmodel für das Stranggießen von Stahl und experimentelle Validierung

    Pierer, R., 2007

    Research output: Book/ReportCommissioned reportTransferpeer-review

  489. Published

    Common hot tearing criteria and experimental validation.

    Pierer, R., Bernhard, C. & Chimani, C., 2004, In : Berg- und hüttenmännische Monatshefte : BHM. 149, p. 95-101

    Research output: Contribution to journalArticleResearchpeer-review

  490. Published

    Überblick über Ergebnisse der SSCT Apparatur in Hinblick auf die Heißrissbildung bei Kohlenstoffstählen

    Pierer, R., 2007

    Research output: Book/ReportCommissioned reportTransferpeer-review

  491. Published

    A Contribution to Hot Tearing in the Continuous Casting Process

    Pierer, R., Bernhard, C. & Chimani, C., 2007, In : Revue de métallurgie (Cahiers d'informations techniques : CIT). p. 72-83

    Research output: Contribution to journalArticleResearchpeer-review

  492. Published

    The importance of solidification structure with respect to hot tearing during continuous casting of steels

    Pierer, R., Rauter, W. & Bernhard, C., 2012, TMS 2012. p. 251-258

    Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

  493. Published

    Formulation of a hot tearing criterion for the continuous casting process

    Pierer, R. F., 2007, 168 p.

    Research output: ThesisDoctoral ThesisResearch

  494. Published

    Magnesium: origin and role in calcium-treated inclusions.

    Pistorius, C., Presoly, P. & Tshilombo, G., 2006, Advanced Processing of Metals and Materials, Sohn International Symposium. TMS, p. 373-378

    Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

  495. Published

    Reduction of Fine Ores in Argon-Hydrogen Plasma

    Plaul, J., Krieger, W. & Bäck, E., 2005, In : Steel research international. 76, p. 548-554

    Research output: Contribution to journalArticleResearchpeer-review

  496. Published

    Fluidized-bed technology for the production of iron products for steelmaking

    Plaul, F., Böhm, C. & Schenk, J., 2008, Proceedings IFSA 2008. p. 334-346

    Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

  497. Published

    Schmelzreduktion von hämatitischen Feinerzen im Wasserstoff-Argon-Plasma

    Plaul, J., 2005

    Research output: ThesisDoctoral ThesisResearch

  498. Published

    Fluidized-bed technology for the production of iron products for steelmaking

    Plaul, F. J., Böhm, C. & Schenk, J. L., 1 Feb 2009, In : Journal of the Southern African Institute of Mining and Metallurgy. 109, 2, p. 121-128 8 p.

    Research output: Contribution to journalArticleResearchpeer-review

  499. Published

    Characterisation of phase transformation and damage during the solidification of steel

    Presoly, P. & Pierer, R., 2009.

    Research output: Contribution to conferencePosterResearchpeer-review

  500. Published
Previous 1 2 Next