Chair of Ferrous Metallurgy

Organisational unit: Chair

Research output

  1. 2020
  2. Published
  3. Published

    Utilization of metallurgical slag with presence of novel CaO-MgO-SiO2-Al2O3 as a composite sorbent for wastewater treatment contaminated by cerium

    Morozova, A. G., Lonzinger, T. M., Skotnikov, V. A., Sahu, J. N., Mikhailov, G. G., Schenk, J., Bhattacharyya, A. & Kapelyushin, Y., 10 May 2020, In : Journal of Cleaner Production. 255, 120286.

    Research output: Contribution to journalArticleResearchpeer-review

  4. Published

    Tailoring the FeO/SiO2 Ratio in Electric Arc Furnace Slags to Minimize the Leaching of Vanadium and Chromium

    Neuhold, S. F., Algermissen, D., Drissen, P., Adamczyk, B., Presoly, P., Sedlazeck, K. P., Schenk, J., Raith, J., Pomberger, R. & Vollprecht, D., 8 Apr 2020, In : Applied Sciences. 10.2020, 7, p. 5249 17 p.

    Research output: Contribution to journalArticleResearchpeer-review

  5. E-pub ahead of print

    The effect of alkali on the reaction kinetics and strength of blast furnace coke

    Dastidar, M. G., Bhattacharyya, A., Sarkar, B. K., Dey, R., Mitra, M. K. & Schenk, J., 21 Feb 2020, In : Fuel. 268.2020, May, 10 p., 117388.

    Research output: Contribution to journalArticleResearchpeer-review

  6. Published

    Slag Formation during Reduction of Iron Oxide Using Hydrogen Plasma Smelting Reduction

    Naseri Seftejani, M., Schenk, J., Spreitzer, D. & Zarl, M. A., 20 Feb 2020, In : Materials. 13.2020, 4, 24 p., 935.

    Research output: Contribution to journalArticleResearchpeer-review

  7. Published

    Novel sintering indexes to evaluate and correlate the crystal characteristics and compressive strength in magnetite pellets

    Wang, Y., Schenk, J., Zhang, J., Liu, Z., Wang, J., Niu, L. & Cheng, Q., 15 Feb 2020, In : Powder Technology. 362, p. 517-526 10 p.

    Research output: Contribution to journalArticleResearchpeer-review

  8. Published

    Structural Features and Combustion Behaviour of Waste Bamboo Chopstick Chars Pyrolysed at Different Temperatures

    Xu, R., Deng, S., Wang, W., Schenk, J. & Wang, F., 3 Feb 2020, In : BioEnergy research . 2020

    Research output: Contribution to journalArticleResearchpeer-review

  9. Published

    Aktueller Stand und Perspektiven für eine CO2-freie Stahlerzeugung

    Sormann, A. & Schenk, J., Feb 2020, In : Stahl + Technik. 02, 2020, p. 32-35 4 p.

    Research output: Contribution to journalArticleTransfer

  10. Published

    Fluidization behavior and reducibility of iron ore fines during hydrogen-induced fluidized bed reduction

    Spreitzer, D. & Schenk, J., 1 Jan 2020, In : Particuology.

    Research output: Contribution to journalArticleResearchpeer-review

  11. Published

    HT-LSCM as a Tool for Indirect Determination of Precipitates by Real-Time Grain Growth Observations

    Fuchs, N., Bernhard, C., Michelic, S. & Dippenaar, R., 1 Jan 2020, TMS 2020 149th Annual Meeting and Exhibition Supplemental Proceedings. Peng, Z., Hwang, J-Y., Downey, J., Gregurek, D., Zhao, B., Yucel, O., Keskinkilic, E., Jiang, T., White, J. & Mahmoud, M. (eds.). Springer, p. 47-55 9 p. (Minerals, Metals and Materials Series).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  12. Published
  13. Published

    Critical evaluation and thermodynamic modeling of the Fe–P and Fe–C–P system

    Bernhard, M. C., Kang, Y-B., Presoly, P., Gheribi, A. & Bernhard, C., 2020, In : Calphad: Computer Coupling of Phase Diagrams and Thermochemistry. 70

    Research output: Contribution to journalArticleResearchpeer-review

  14. Published
  15. Published

    Microstructural evolution of metallurgical coke: Evidence from Raman spectroscopy

    Rantitsch, G., Bhattacharyya, A., Günbati, A., Schulten, M-A., Schenk, J., Letofsky-Papst, I. & Albering, J., 2020, In : International journal of coal geology. 2020, 227, p. 103546 12 p.

    Research output: Contribution to journalArticleResearchpeer-review

  16. Published
  17. Published
  18. Published
  19. 2019
  20. Published

    Gasification Characteristics and Kinetics of Unburned Pulverized Coal in Blast Furnaces

    Zan, R., Wang, W., Xu, R., Schenk, J., Zheng, H. & Wang, H., Nov 2019, In : Energies.

    Research output: Contribution to journalArticleResearchpeer-review

  21. Published

    The role of FeTi-addition on micro-inclusions in the production of ULC steel grades via RH-process route

    Bernhard, C., Dorrer, P., Michelic, S. K. & Rössler, R., 9 Oct 2019, In : Berg- und hüttenmännische Monatshefte : BHM. 2019, 11, p. 475-478 4 p.

    Research output: Contribution to journalArticleResearchpeer-review

  22. Published

    The Role of Grain Boundary Oxidation on Surface Crack Formation under Continuous Casting Conditions

    Krobath, R., Bernhard, C., Ilie, S., Six, J., Hahn, S. & Pennerstorfer, P., 4 Oct 2019, In : Berg- und hüttenmännische Monatshefte : BHM. 164, 11, p. 461 - 465

    Research output: Contribution to journalArticleResearchpeer-review

  23. Published

    Analyse von Fe,Mn-Oxiden mittels REM/EDX: Bringt die elektrolytische Extraktion was sie verspricht

    Mayerhofer, A., Michelic, S. K. & Bernhard, C., 18 Sep 2019, p. 181-186. 6 p.

    Research output: Contribution to conferencePaperResearchpeer-review

  24. Published

    Analyse von Fe,Mn-Oxiden mittels REM/EDX: Bringt die elektrolytische Extraktion was sie verspricht?

    Mayerhofer, A., 18 Sep 2019.

    Research output: Contribution to conferencePosterResearchpeer-review

  25. Published

    Residual Processing in the European Steel Industry: A Technological Overview

    Rieger, J. & Schenk, J., 15 Sep 2019, In : Journal of Sustainable Metallurgy. 5, 3, p. 295-309 15 p.

    Research output: Contribution to journalArticleResearchpeer-review

  26. Published

    Reduction of Iron Oxides with Hydrogen–A Review

    Spreitzer, D. & Schenk, J., 18 Aug 2019, In : Steel research international. 90.2019, 10, 17 p., 1900108.

    Research output: Contribution to journalArticleTransferpeer-review

  27. E-pub ahead of print
  28. Published

    High precious phase diagrams – a roadmap for a successful casting processing

    Presoly, P., Bernhard, M. C., Bernhard, C., Hahn, S., Pennerstorfer, P., Ilie, S. & Six, J., 26 Jun 2019, 4th ESTAD European Steel Technology and Appliciation Days. Steel Institute VDEh, 10 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  29. Published

    The role of grain boundary oxidation on surface crack formation under continuous casting conditions

    Krobath, R., Bernhard, C., Ilie, S., Six, J., Hahn, S. & Pennerstorfer, P., 26 Jun 2019, Proceedings of the 4th ESTAD . Duesseldorf, Germany: Steel Institute VDEh

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  30. Published

    Co-utilization of converter sludge-containing dedust wastewater in iron ore sintering to save fresh water, enhance quality and reduce pollution

    Wang, Y., Zhang, J., Liu, Z., Du, C., Schenk, J., Shao, J. & Zhang, Y., 21 Jun 2019, In : Journal of Cleaner Production. 234.2019, 10 October, p. 157-170 14 p.

    Research output: Contribution to journalArticleResearchpeer-review

  31. Published

    Cerium Containing Inclusions: Kinetic Model and Experimental Results

    Baumgartner, K., Bernhard, C., You, D. & Michelic, S. K., 20 Jun 2019.

    Research output: Contribution to conferencePosterResearch

  32. Published

    Characterization of coke surface using topographic and specific surface area measurement techniques

    Bhattacharyya, A., Rantitsch, G., Schenk, J., Guenbati, A., Janhsen, U. & Schulten, M., Jun 2019, METEC-ESTAD 2019 Proceedings.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  33. Published

    Reduction of Haematite Using Hydrogen Thermal Plasma

    Naseri Seftejani, M., Schenk, J. & Zarl, M. A., 16 May 2019, In : Materials. 12.2019, 10, 22 p., 1608.

    Research output: Contribution to journalArticleResearchpeer-review

  34. Published

    Investigation of water droplet impingement under conditions of the secondary cooling zone of a continuous caster

    Preuler, L., Peyha, M., Weiß, C., Bernhard, C. & Ilie, S., 6 May 2019, Proceedings of the AISTech 2019, Pittsburgh. 10 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  35. Published

    Structural Change of Coke During the Burden Descent in an Experimental Blast Furnace

    Bhattacharyya, A., Rantitsch, G., Wiener, J., Schenk, J., Pethke, J. & Fredriksson, U., May 2019, AISTECH 2019 Proceedings.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  36. Published

    Analytical and numerical determination of the heat transfer coefficient between scrap and hot metal based on small-scale experiments

    Penz, F. M., Tavares, R. P., Weiss, C., Schenk, J., Ammer, R., Pastucha, K. & Klösch, G., 24 Apr 2019, In : International journal of heat and mass transfer. 138.2019, August, p. 640-646 7 p.

    Research output: Contribution to journalArticleResearchpeer-review

  37. Published

    Kornfeinung ausscheidungsverfestigter Hochtemperaturferrite mittels Ce-haltiger Einschlüsse

    Godor, F. R., Mayerhofer, A., Presoly, P., Clemens, H., Mayer, S. & Bernhard, C., 4 Apr 2019, In : Berg- und hüttenmännische Monatshefte : BHM. 164.2019, 5, p. 220-224 5 p.

    Research output: Contribution to journalArticleResearchpeer-review

  38. Published

    In-situ Untersuchung von Austenitkornwachstumsprozessen in Stählen mittels Hochtemperatur Laser-Scanning-Konfokal-Mikroskop

    Fuchs, N. & Bernhard, C., 1 Apr 2019, In : Berg- und hüttenmännische Monatshefte : BHM. 164.2019, 5, p. 200-204 5 p.

    Research output: Contribution to journalArticleResearchpeer-review

  39. Published

    Evaluation of the Influences of Scrap Melting and Dissolution during Dynamic Linz–Donawitz (LD) Converter Modelling

    Penz, F. M., Schenk, J., Ammer, R., Kloesch, G. & Pastucha, K., Apr 2019, In : Processes : open access journal. 7.2019, 4

    Research output: Contribution to journalArticleResearchpeer-review

  40. Published

    Minimising the leaching of V and Cr from electric arc furnace slags by decreasing the FeO/SiO2 ratio

    Neuhold, S. F., Höllen, D., Presoly, P., Adamczyk, B., Drissen, P., van Zomeren, A., Schüler, S. & Mudersbach, D., Apr 2019, Proceedings of the 6th Internation Slag Valorisation Symposium: Science, Innovation & Entrepreneurship in Pursuit of a Sustainable World. Malfiet, A., Peys, A. & Di Maria, A. (eds.). Mechelen, Vol. 6. p. 175-178

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  41. Published

    In-situ observation of non-metallic inclusions in the system steel-slag-refractory: Set-up, limitations and results

    Michelic, S. K., Dieguez Salgado, U. & Bernhard, C., 11 Mar 2019.

    Research output: Contribution to conferencePresentationResearchpeer-review

  42. Published

    A Review of Steel Scrap Melting in Molten Iron-Carbon Melts

    Penz, F. M. & Schenk, J., 1 Jan 2019, In : Steel research international. 2019, 20 p., 1900124.

    Research output: Contribution to journalReview articleResearchpeer-review

  43. Published

    Diffusive steel scrap melting in carbon-saturated hot metal-Phenomenological investigation at the solid-liquid interface

    Penz, F. M., Schenk, J., Ammer, R., Klösch, G., Pastucha, K. & Reischl, M., 1 Jan 2019, In : Materials. 12.2019, 8, 1358.

    Research output: Contribution to journalArticleResearchpeer-review

  44. Published

    Kinetics and Mechanisms of Dolime Dissolution in Steelmaking Slag

    Cheremisina, E., Schenk, J., Nocke, L., Paul, A. & Wimmer, G., 1 Jan 2019, In : Metallurgical and Materials Transactions B: Process Metallurgy and Materials Processing Science. 50.2019, 3, p. 1269 - 1276 8 p.

    Research output: Contribution to journalArticleResearchpeer-review

  45. Published

    Study on the Influence of FeTi‐Addition on the Inclusion Population in Ti‐Stabilized ULC Steels and Its Consequences for SEN‐Clogging

    Dorrer, P., Michelic, S. K., Bernhard, C., Penz, A. & Rössler, R., 1 Jan 2019, In : Steel research international. 2019, 5, 13 p., 1800635.

    Research output: Contribution to journalArticleResearchpeer-review

  46. Published

    Thermodynamic Model of Ion-Exchange Process as Exemplified by Cerium Sorption from Multisalt Solutions

    Cheremisina, O. V., Schenk, J., Cheremisina, E. A. & Ponomareva, M. A., 1 Jan 2019, In : Journal of Mining Institute. 237.2019, p. 307-316 10 p.

    Research output: Contribution to journalArticleResearchpeer-review

  47. Published
  48. Published
  49. Published
  50. Published

    Evaluation of AHSS concepts with a focus on the product properties and appropriate casting characteristics of Arvedi ESP thin slab casters

    Bernhard, C., Linzer, B., Presoly, P., Watzinger, I. & Watzinger, J., 2019, In : IOP Conference Series: Materials Science and Engineering. 529.2019, 012071, p. 1-10 10 p., 012071.

    Research output: Contribution to journalArticleResearchpeer-review

  51. Published
  52. Published

    KIC RawMaterials: Iron Balance—Austria

    Wolfinger, T., Spreitzer, D., Zarl, M., Pichler, A. & Schenk, J., 2019, In : Berg- und hüttenmännische Monatshefte : BHM. 164.2019, 4, p. 183 - 187 5 p.

    Research output: Contribution to journalArticleResearch

  53. Published
  54. Published

    Modeling of the secondary refining process of steel

    You, D., Michelic, S. K. & Bernhard, C., 2019.

    Research output: Contribution to conferencePresentationResearchpeer-review

  55. Published

    The role of FeTi-addition on micro-inclusions in the production of ULC steel grades via RH-process route

    Bernhard, C., Dorrer, P., Michelic, S. K. & Rössler, R., 2019, Proceedings of the 4th European Steel Technology and Application Days (ESTAD). 7 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  56. Published
  57. Published
  58. Published
  59. 2018
  60. Published

    Thermodynamic of Liquid Iron Ore Reduction by Hydrogen Thermal Plasma

    Naseri Seftejani, M. & Schenk, J., 11 Dec 2018, In : Metals : open access journal . 8, 12, 17 p.

    Research output: Contribution to journalArticleResearchpeer-review

  61. Published

    Abrasiveness of mining slurries: influence of the morphology, concentration of slurries, mean grain size and nature of the abrasive particles

    Moreira, V. E. S., Silva, F. C., Quintao, V. M., Siqueira, F., Kaelber, F., Meinhold, S., Schenk, J. & Rodrigues da Costa, A., 3 Dec 2018.

    Research output: Contribution to conferencePaperResearchpeer-review

  62. Published

    Dissolution of Scrap in Hot Metal under Linz-Donawitz (LD) Steelmaking Conditions

    Penz, F. M., Schenk, J., Ammer, R., Kloesch, G. & Pastucha, K., Dec 2018, In : Metals : open access journal . 8.2018, 1078, 9 p., 1078.

    Research output: Contribution to journalArticleResearchpeer-review

  63. Published

    Influence of Iron Minerals on the Volume, Strength, and CO2 Gasification of Ferro-coke

    Xu, R., Zheng, H., Wang, W., Schenk, J. & Xue, Z., Dec 2018, In : Energy and Fuels. 32, 12, p. 12118-12127

    Research output: Contribution to journalArticleResearchpeer-review

  64. Published

    Slag characterisation of 308L-type stainless steel rutile flux-cored wires

    Holly, S., Mayer, P. M., Bernhard, C. & Posch, G., 30 Nov 2018, In : Welding in the world. 63, p. 293-311

    Research output: Contribution to journalArticleResearchpeer-review

  65. Published

    Experimental determination of the strength and reactivity of lumpy and briquetted chars from non-coking coals under melter-gasifier conditions

    Bhattacharyya, A., Schenk, J. & Heckmann, H., 26 Nov 2018, In : Ironmaking and steelmaking. 45, 10, p. 907-912

    Research output: Contribution to journalArticleResearchpeer-review

  66. Published

    Freisetzungsbestimmende Mechanismen von Schwermetallen in Stahlwerksschlacken - Analyse, Modellierung, Synthesen

    Neuhold, S. F., Vollprecht, D., Presoly, P., Schenk, J. & Adamczyk, B., 7 Nov 2018, Recy & DepoTech 2018: Vorträge-Konferenzband. Leoben, p. 135-140 122

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  67. Published

    Neuartige Zweistoffdüsen steigern die Energieeffizienz der Sekundärkühlung

    Wolff, R., Frick, J., Bernhard, C. & Taferner, M., 7 Nov 2018, In : Stahl und Eisen. 2018, 138, p. 111-114

    Research output: Contribution to journalArticleResearchpeer-review

  68. Published

    Transport Properties of HPSR Gases

    Naseri Seftejani, M. & Schenk, J., 24 Oct 2018, The Chinese Society for Metals.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  69. Published

    Influence of casting temperature on the microstructure of AISI M42 high speed steel

    Baumgartner, K., Bernhard, C., Pfeiffer, A., Wieser, G. & Hafok, M., 18 Oct 2018, Ingot rolling, casting, forging 2018. p. 321 - 329 ICRF-173

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  70. Published
  71. Published

    Guest Editorial - EUROMAT 2017 Symposia on Processing

    Kaban, I., Agathopoulos, S., Valenza, F., Sommitsch, C., Schenk, J., Papaefthymiou, S. & Karantzalis, A., Oct 2018, In : Journal of Materials Engineering and Performance. 27.2018, 10, p. 4981-4982

    Research output: Contribution to journalEditorialResearchpeer-review

  72. Published

    THERMODYNAMIC ASPECTS OF HYDROGEN PLASMA SMELTING REDUCTION OF IRON OXIDES

    Naseri Seftejani, M. & Schenk, J., 20 Sep 2018, Austrian Society for Metallurgy and Materials: ASMET. ASMET

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  73. Published

    An alternative approach for the experimental verification of microsegregation models using an in-situ hot tensile test during solidification of steel

    Bernhard, M. C., Presoly, P., Bernhard, C. & You, D., 3 Sep 2018, Proceedings of the 7th International Conference on Solidification and Gravity 2018. Miskolc-Lillafüred, Hungary

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  74. Published

    High concentrations at the final solidification of advanced steels: Thermodynamic evaluation of replicated “segregation-samples” by means of DTA/DSC-measurements

    Presoly, P., Bernhard, M. C., You, D. & Bernhard, C., 3 Sep 2018, Solidification and Gravity VII. p. 138-143

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  75. Published

    MICROSTRUCTURAL EVOLUTION OF BLAST FURNACE COKE DURING EXPERIMENTAL HEATING – THE IFORS APPROACH

    Rantitsch, G., Bhattacharyya, A. & Schenk, J., Sep 2018, Proceedings of 8th International Congress on Science and Technology of Ironmaking.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  76. Published

    STRUCTURAL CHARACTERIZATION OF COKE FROM THE TUYERE REGION OF THE BLAST FURNACE

    Bhattacharyya, A., Rantitsch, G., Schenk, J., Janhsen, U. & Guenbati, A., Sep 2018, Proceedings of 8th International Congress on Science and Technology of Ironmaking.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  77. Published
  78. Published

    Kinetics of molten iron oxides reduction using hydrogen

    Naseri Seftejani, M. & Schenk, J., Jul 2018, In : Metallurgia Italiana. n. 7/8 2018, 0026-0843, p. 5-14 10 p.

    Research output: Contribution to journalArticleResearchpeer-review

  79. Published

    DISSOLUTION BEHAVIOUR OF ULC STEEL IN CARBON SATURATED HOT METAL

    Penz, F. M., Schenk, J., Ammer, R., Pastucha, K. & Maunz, B., 13 Jun 2018, p. ICS070. 12 p.

    Research output: Contribution to conferencePaperResearchpeer-review

  80. Published

    Formation of multi-type inclusions during the cooling and solidification of steel: A trend model

    You, D., Michelic, S. K. & Bernhard, C., 13 Jun 2018, In : Metals : open access journal . 8, 6, 452.

    Research output: Contribution to journalArticleResearchpeer-review

  81. Published

    The way to a carbon free steelmaking

    Sormann, A., Schenk, J., Naseri Seftejani, M., Zarl, M. A. & Spreitzer, D., 10 Jun 2018.

    Research output: Contribution to conferencePaperResearchpeer-review

  82. Published

    Modelling the dependence of sinter bed permeability on sinter porosity and structure

    Höftberger, A., Bhattacharyya, A., Schenk, J., Weiß, C., Schaffer, C. & Schuster, E., Jun 2018, Proceedings of ADMET 2018.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  83. Published

    Investigation of the Fe-C-Si-Mn system with special focus on the Fe – 3 wt.-% Si – high Mn section

    Presoly, P., Bernhard, M. C. & Bernhard, C., 30 May 2018, CALPHAD XLVII - Conference Program. p. 50

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  84. Published

    Characterization of Ironmaking Raw Materials Using Computed Tomography

    Bhattacharyya, A., Schenk, J., Habe, D. & Oberdorfer, B., May 2018, AISTECH 2018 Proceedings. p. 211 216 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  85. Published

    Evolution of Metallurgical Properties and Microstructures of Lump Coal During the Descending Process in COREX Gasifier

    Xu, R., Zheng, H., Wang, W., Schenk, J., Bhattacharyya, A., Xue, Z. & Song, M., 18 Apr 2018, In : International journal of coal preparation and utilization. p. 1-17 17 p.

    Research output: Contribution to journalArticleResearchpeer-review

  86. Published
  87. Published

    Gasification Reactivity and Structure Evolution of Metallurgical Coke under H2O/CO2 Atmosphere

    Xu, R., Dai, B., Wang, W., Schenk, J., Bhattacharyya, A. & Xue, Z., 15 Feb 2018, In : Energy and Fuels. 32, 2, p. 1188-1195 8 p.

    Research output: Contribution to journalArticleResearchpeer-review

  88. Published

    Fundamentals of hydrogen plasma smelting reduction (HPSR) of iron oxides, a new generation of steelmaking processes

    Naseri Seftejani, M. & Schenk, J., 6 Feb 2018.

    Research output: Contribution to conferencePaperResearchpeer-review

  89. Published

    Effect of iron ore type on the thermal behaviour and kinetics of coal-iron ore briquettes during coking

    Xu, R., Dai, B., Wang, W., Schenk, J. & Xue, Z., 12 Jan 2018, In : Fuel Processing Technology. 173.2018, May, p. 11-20 10 p.

    Research output: Contribution to journalArticleResearchpeer-review

  90. Published

    Dissolution rate of various MgO materials in steel and secondary metallurgy slags

    Cheremisina, E., Schenk, J., Viertauer, A., Nilica, R. & Roessler, R., 1 Jan 2018, AISTech 2018 Proceedings - Iron and Steel Technology Conference and Exposition. Vol. 2018-May. p. 1103-1115 13 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  91. Published

    Kinetics of hydrogen plasma smelting reduction of iron oxides

    Seftejani, M. N. & Schenk, J., 1 Jan 2018, ICS 2018 - 7th International Congress on Science and Technology of Steelmaking: The Challenge of Industry 4.0. Associazione Italiana di Metallurgia

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  92. Published
  93. Published
  94. Published
  95. Published

    Dissolution behaviour of ULC steel in carbon saturated hot metal

    Penz, F., Schenk, J., Ammer, R., Pastucha, K. & Maunz, B., 2018, In : Metallurgia Italiana. 110, 11-12, p. 36 45 p.

    Research output: Contribution to journalArticleResearchpeer-review

  96. Published
  97. Published

    Energy Efficiency in Secondary Cooling – new generation of air-mist nozzles with reduced air consumption and high cooling efficiency

    Wolff, R., Frick, J., Bernhard, C. & Taferner, M., 2018, Proceedings. 8 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  98. Published
  99. Published
  100. Published
  101. Published

    Kornfeinung ausscheidungsverfestigter Hochtemperaturferrite mittels Ce-haltiger Einschlüsse

    Godor, F. R., Mayerhofer, A., Presoly, P., Clemens, H., Mayer, S. & Bernhard, C., 2018, Praktische Metallographie Sonderband: Fortschritte in der Metallographie. 1 ed. Vol. 52. p. 319-324

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  102. Published
  103. Published
  104. 2017
  105. Published

    TOWARDS CO2 LEAN IRONMAKING – A REASONABLE WAY FOR INDIA´S STEEL INDUSTRY

    Schenk, J., 11 Dec 2017, 3rd nternational Conference on Science and Technology of Ironmaking & Steelmaking. Kanpur, India

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  106. Published

    Calculation Model to Quantify the Amount of Carry-Over Slag From Primary Metallurgical Plants

    Schnalzger, G., Bundschuh, P., Rössler, R., Schenk, J. & Viertauer, A., Dec 2017, In : Bulletin. The Journal of Refractory Innovations. 1, Autumn, p. 76 - 81 6 p.

    Research output: Contribution to journalArticleResearch

  107. Published

    Chromium Stability in Steel Slags

    Cheremisina, E. & Schenk, J., Nov 2017, In : Steel research international. 88, 11

    Research output: Contribution to journalArticleResearchpeer-review

  108. Published
  109. Published

    Kein sechswertiges Chrom in Stahlwerksschlacken

    Cheremisina, E. & Schenk, J., Aug 2017, In : Stahl und Eisen. 137, 8, p. 33-34 2 p.

    Research output: Contribution to journalLetterResearch

  110. Published

    Further development and validation of IDS by means of selected experiments

    Presoly, P., Bernhard, C., Fuchs, N., Miettinen, J., Louhenkilpi, S. & Laine, J., 27 Jun 2017, Proceedings of 9th ECCC European Continuous Casting Conference - ECCC2017. Vienna: ASMET

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  111. Published

    Effect of Scrap Composition on the Thermodynamics and Kinetic Modelling of BOF Converter

    Penz, F. M., Bundschuh, P., Schenk, J., Pastucha, K., Panhofer, H. & Paul, A., 11 Jun 2017, p. 1-10. 10 p.

    Research output: Contribution to conferencePaperResearchpeer-review

  112. Published

    INVESTIGATION OF THE SPECIFIC SURFACE AREA AND PORE STRUCTURE OF BLAST FURNACE SINTERS

    Bhattacharyya, A., Schenk, J., Schaffer, C., Schadler, S. & Schuster, E., Jun 2017, European Steel Technology and Application Days ESTAD 2017: Conference Proceedings.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  113. Published

    The potential for grain refinement of a super austenitic stainless steel with a cerium grain refiner

    Baumgartner, K., Bernhard, C., Presoly, P., Hafok, M. & Leitner, H., 25 May 2017, ESSC and DUPLEX 2017 - 9th European Stainless Steel Conference - Science and Market and 5th European Duplex Stainless Steel Conference and Exhibition. Associazione Italiana di Metallurgia, Vol. 2017-May.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  114. Published

    The Effect of H2O on the Reactivity and Microstructure of Metallurgical Coke

    Wang, W., Bowen, D., Xu, R., Schenk, J., Wang, J. & Xu, Z., 24 May 2017, In : Steel research international. 88, 8, p. 1-9 9 p., 1700063.

    Research output: Contribution to journalArticleResearchpeer-review

  115. Published

    Calculation model to quantify the amount of carry-over slag from primary metallurgical aggregates

    Schnalzger, G., Bundschuh, P., Rössler, R., Schenk, J. & Viertauer, A., 11 May 2017, Proceedings of ISDM Conference 2017. p. 1-8 8 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  116. Published

    A New Experimental Setup for the Simulation of Surface Crack Formation in the Continuous Casting Process

    Krobath, R. & Bernhard, C., 8 May 2017, p. 1827 - 1837. 11 p.

    Research output: Contribution to conferencePaperResearchpeer-review

  117. Published
  118. Published

    A new method for the experimental simulation of surface crack formation in continuous casting

    Krobath, R., Bernhard, C., Ilie, S., Six, J. & Hahn, S., Apr 2017, In : Metallurgia Italiana. 1, 4, p. 5-13

    Research output: Contribution to journalArticleResearchpeer-review

  119. Published

    Influence of Silicon and Manganese on the Peritectic Range for Steel Alloys

    Presoly, P. & Bernhard, C., Apr 2017, In : Iron and Steel Technology. 2017, 4

    Research output: Contribution to journalArticleResearchpeer-review

  120. Published

    Modeling of manganese sulfide formation during the solidification of steel

    You, D., Michelic, S. K., Wieser, G. & Bernhard, C., Feb 2017, In : Journal of materials science. 52, 3, p. 1797-1812

    Research output: Contribution to journalArticleResearchpeer-review

  121. Published

    Influence of Magnesium Oxide content on kinetics of lime dissolution in steelmaking slags

    Cheremisina, E., Schenk, J., Ludwig, N., Paul, A. & Wimmer, G., 17 Jan 2017, In : ISIJ international. 57, 2, p. 304-313 10 p.

    Research output: Contribution to journalArticleResearchpeer-review

  122. Published

    Influence of operation parameters on the cooling performance of water-air nozzles

    Preuler, L., Bernhard, C., Ilie, S. & Six, J., 1 Jan 2017, METAL 2017 - 26th International Conference on Metallurgy and Materials, Conference Proceedings. Vol. 2017-January. p. 45-51 7 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  123. Published

    Acicular Ferrite Formation and Its Influencing Factors - A Review

    Loder, D., Michelic, S. & Bernhard, C., Jan 2017, In : Journal of Materials Science Research. 6, 1, p. 24-43

    Research output: Contribution to journalArticleResearchpeer-review

  124. Published
  125. Published
  126. Published
  127. Published
  128. Published
  129. Published
  130. Published

    Experimental Study on the Behavior of TiN and Ti2O3 Inclusions in Contact with CaO-Al2O3-SiO2-MgO Slags

    Michelic, S. K. & Bernhard, C., 2017, In : Scanning.

    Research output: Contribution to journalArticleResearchpeer-review

  131. Published

    Kinetic model on manganese sulfide formation during solidification of steel

    You, D., Michelic, S. K., Presoly, P. & Bernhard, C., 2017, 6th Decennial International Conference on Solidification Processing (SP17).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  132. Published

    Metallurgical approach for the development of a hot crack-resistant metal-cored wire

    Holly, S., Schnitzer, R., Posch, G., Bruckner, J. & Presoly, P., 2017, In : Welding in the world. 61, p. 423 - 434

    Research output: Contribution to journalArticleResearchpeer-review

  133. Published

    Modeling Inclusion Formation during Solidification of Steel: A Review

    You, D., Michelic, S. K., Presoly, P., Liu, J. & Bernhard, C., 2017, In : Metals : open access journal . 7, 11, p. 460 1 p.

    Research output: Contribution to journalArticleResearchpeer-review

  134. Published
  135. Published

    Möglichkeiten und Grenzen von Modellen zur Vorhersage der Auslaugbarkeit von Stahlwerksschlacken

    Höllen, D., Neuhold, S., Mudersbach, D., Schüler, S., Sommerauer, H., Griessacher, T., Dijkstra, J., van Zomeren, A., Presoly, P., Schenk, J. & Pomberger, R., 2017, Mineralische Nebenprodukte und Abfälle: Aschen, Schlacken, Stäube und Baurestmassen. Vol. 4. p. 205-222

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  136. Published

    On the Relevance of Microsegregation Models for Process Control in Continuous Casting of Steel

    Bernhard, M. C., Presoly, P., Bernhard, C., Six, J. & Ilie, S., 2017, Conference Proceedings of the 26th Anniversary International Conference on Metallurgy and Materials - Metal 2017. Brno, Czech Republic

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  137. Published

    Optimization of Coal Briquettes for Lower Reactivity and Higher Strength under Melter-gasifier Conditions

    Bhattacharyya, A., Heckmann, H., Schenk, J. & Wurm, J., 2017.

    Research output: Contribution to conferencePaperResearchpeer-review

  138. Published

    Study of Clogging Deposit Buildup in Al-killed and Ca-Treated High-Sulfur Steels With Focus on the Steel/Refractory Interface

    Dorrer, P., Michelic, S., Klösch, G., Reiter, J., Paul, A. & Bernhard, C., 2017, AISTech 2017 Proceedings. p. 1555 - 1565

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  139. Published
  140. Published
  141. Published
  142. Published
  143. Published

    Untersuchungen des Ausscheidungsverhaltens von H-Karbiden in einer kohlenstoffhaltigen TiAl Legierung mittels in- und ex-situ Experimenten

    Burtscher, M., Kirchheimer, K., Weißensteiner, I., Bernhard, C., Lederhaas, B., Klein, T., Mayer, S. & Clemens, H., 2017, Praktische Metallographie Sonderband 51. p. 55-60

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  144. Published
  145. 2016
  146. Published

    A new method for the experimental simulation of surface crack formation in continuous casting

    Krobath, R., Bernhard, C., Ilie, S., Six, J. & Hahn, S., 1 Dec 2016.

    Research output: Contribution to conferencePresentationResearchpeer-review

  147. Published

    HT-LSCM - A valuable tool for surface microstructure investigations

    Fuchs, N., Krobath, R., Bernhard, C., Ilie, S. & Xia, G., 1 Dec 2016.

    Research output: Contribution to conferencePresentationResearchpeer-review

  148. Published
  149. Published

    Evaluation of the Potential for Reduction of CO2 Emissions at the Secondary Metallurgy

    Gerasev, A., Bundschuh, P., Schenk, J., Viertauer, A., Trummer, B., Arth, G., Rössler, R. & Reisinger, P., 1 Nov 2016, In : RHI bulletin : the journal of refractory innovations. 2016, 1, p. 28-34 7 p.

    Research output: Contribution to journalArticleResearch

  150. Published

    Thermodynamische Modellierung der Schlackenfahrweise in der Sekundärmetallurgie

    Penz, F., Bundschuh, P., Griessacher, T. & Schenk, J., 13 Oct 2016, Schlacken-Symposium 2016: Kreislaufwirtschaft stabil weiter entwickeln. p. 153-166 14 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  151. Published

    Hydrogen as Reducing Agent in Ironmaking and Steemaking - Status, Potentials, Challenges

    Schenk, J., 4 Oct 2016.

    Research output: Contribution to conferencePresentationResearch

  152. Published

    Austenite grain growth investigated by complementary in-situ techniques

    Gamsjäger, E., Tichauer, W., Lederhaas, B., Garcin, T. & Militzer, M., 28 Sep 2016.

    Research output: Contribution to conferencePresentationResearchpeer-review

  153. Published

    ANALYSIS OF THE ALKALI DISTRIBUTION IN IRONMAKING REACTORS BY THERMOCHEMICAL MODELLING

    Pichler, A., Schenk, J., Hauzenberger, F., Stocker, H. & Thaler, C., Sep 2016, 7TH EUROPEAN COKE AND IRONMAKING CONGRESS - ECIC 2016, Proceedings.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  154. Published

    EVALUATION OF THE CAPABILITIES OF DIRECT AND SMELTING REDUCTION PROCESSES TO ENHANCE THE ENERGY EFFICIENCY AND TO REDUCE THE CO2 EMISSION OF THE STEEL PRODUCTION IN EUROPE

    Schenk, J. & Lüngen, H-B., Sep 2016, 7TH EUROPEAN COKE AND IRONMAKING CONGRESS - ECIC 2016, Proceedings. Linz

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  155. Published

    Experimental Simulation of the Interaction of Slag and Hot Metal with Coke at the Bosh Region of Blast Furnace

    Bhattacharyya, A., Schenk, J., Jäger, M., Stocker, H. & Thaler, C., Sep 2016, 7th European Coke and Ironmaking Conference Proceedings.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  156. Published
  157. Published
  158. Published

    Systematische Untersuchung der Azikularferritbildung in Stählen

    Loder, D., Michelic, S. & Bernhard, C., 11 Jul 2016, In : Berg- und hüttenmännische Monatshefte : BHM. 161, 7, p. 315-320

    Research output: Contribution to journalArticleResearchpeer-review

  159. Published

    Metallurgical approach of development of a hot crack resistant metal-cored wire

    Stein, H., Schnitzer, R., Posch, G., Bruckner, J. & Presoly, P., Jul 2016.

    Research output: Contribution to conferencePresentationResearch

  160. Published

    Microsegregation Model with Local Equilibrium Partition Coefficients During Solidification of Steels

    You, D., Bernhard, C., Wieser, G. & Michelic, S., Jul 2016, In : Steel research international. 87, 7, p. 840-849

    Research output: Contribution to journalArticleResearchpeer-review

  161. Published

    Hydrogen as Reducing Agent in Iron and Steel Production - Status, Potentials, Challenges

    Schenk, J., 22 Jun 2016.

    Research output: Contribution to conferencePresentationTransfer

  162. Published

    Near net shape casting - current status and future perspectives

    Bernhard, C., 22 Jun 2016.

    Research output: Contribution to conferencePresentationTransfer

  163. Published

    Determination of the specific surface area of cokes and chars for simulated process conditions of blast furnace and smelting reduction routes

    Bhattacharyya, A., Schenk, J., Thaler, C. & Stocker, H., Jun 2016, SCANMET V Proceedings.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  164. Published

    A transient 2D solidification model for defect prevention in the continuous casting process

    Bernhard, C., 25 May 2016.

    Research output: Contribution to conferencePresentationResearch

  165. Published

    Influence of Silicon and Manganese on the Peritectic Range for Steel Alloys

    Presoly, P. & Bernhard, C., 16 May 2016, Proceedings AISTech 2016. Pittsburgh, USA, p. 2497-2506 10 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  166. Published

    Influence of slag properties on the alkali-cycle of a blast furnace

    Pichler, A., Schenk, J., Hauzenberger, F., Stocker, H. & Thaler, C., 16 May 2016, Proceedings of the AISTech 2016. p. 341-352

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  167. Published

    Research on continuous casting at University of Leoben - An overview

    Bernhard, C., 11 May 2016.

    Research output: Contribution to conferencePresentationTransfer

  168. Published

    Charakterisierung der Erstarrungsmechanismen beim Vergießen großer Blöcke mit einem neuen Gießverfahren

    Riedler, M., Michelic, S. & Bernhard, C., 10 May 2016.

    Research output: Contribution to conferencePosterResearch

  169. Published

    Systematische Untersuchung der Azikularferritbildung in Stählen

    Loder, D., 10 May 2016.

    Research output: Contribution to conferencePresentationResearch

  170. Published

    Effect of Alkaline Elements on Coke Structure under Blast Furnace Process Conditions

    Bhattacharyya, A., Schenk, J., Letofsky-Papst, I. & Albering, J., May 2016, Effect of Alkaline Elements on Coke Structure under Blast Furnace Process Conditions.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  171. Published
  172. Published

    Thermodynamic optimization of individual steel database by means of systematic DSC measurements according the CALPHAD approach

    Presoly, P., Six, J. & Bernhard, C., 14 Apr 2016, In : IOP Conference Series: Materials Science and Engineering. 119, 1, 012013.

    Research output: Contribution to journalConference articleResearchpeer-review

  173. E-pub ahead of print

    Systematic investigation of acicular ferrite formation on laboratory scale

    Loder, D. & Michelic, S., 6 Apr 2016, In : Materials science and technology. 10 p.

    Research output: Contribution to journalArticleResearchpeer-review

  174. Published
  175. Published
  176. Published

    Bestimmung von Kriterien zur Beurteilung der Sinterqualität

    Pankratz, C., 2016

    Research output: ThesisMaster's Thesis

  177. Published
  178. Published
  179. Published
  180. Published
  181. Published
  182. Published
  183. Published
  184. Published
  185. Published

    Formation of shrinkage porosity during solidification of steel: Numerical simulation and experimental validation

    Riedler, M., Michelic, S. & Bernhard, C., 2016, In : IOP Conference Series: Materials Science and Engineering. 143.2016, 1, 8 p., 012035.

    Research output: Contribution to journalArticleResearchpeer-review

  186. Published
  187. Published
  188. Published
  189. Published
  190. Published
  191. Published

    Investigation of the influence of the chemical composition of HSLA steel grades on the microstructure homogeneity during hot rolling in continuous rolling mills using a fast layer model

    Schmidtchen, M., Rimnac, A., Warczok, P., Kozeschnnik, E., Bernhard, C., Bragin, S., Kawalla, R. & Linzer, B., 2016, In : IOP Conference Series: Materials Science and Engineering. 119, 1, p. 12001 1 p.

    Research output: Contribution to journalArticleResearchpeer-review

  192. Published
  193. Published

    Numerical simulation and experimental validation of the formation of shrinkage cavity during solidification of steel

    Riedler, M., Michelic, S. & Bernhard, C., 2016, Conference Proceedings to the 25th Anniversary International Conference on Metallurgy and Materials.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  194. Published

    On the formation potential of acicular ferrite microstructure in different steel grades focusing on the influence of carbon content

    Loder, D., Mayerhofer, A. & Michelic, S., 2016, Proceedings AISTech 2016. p. 2465-2474

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  195. Published

    On the modelling of microsegregation in steels involving thermodynamic databases

    You, D., Bernhard, C., Michelic, S., Wieser, G. & Presoly, P., 2016, IOP Conference Series: Materials Science and Engineering. Vol. 119. p. 012027 1 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  196. Published
  197. Published
  198. Published

    Production of Jumbo Blooms by Semi-Continuous Casting: Challenges, Feasibility and Future Potential

    Michelic, S. & Riedler, M., 2016, In : Berg- und hüttenmännische Monatshefte : BHM. 5, p. 39-44

    Research output: Contribution to journalArticleResearchpeer-review

  199. Published

    Segment Casting-an attractive alternative to ingot casting

    Krajewski, P., Michelic, S. & Riedler, M., 2016, Conference Proceedings to the 2nd Medovar Memorial Symposium.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  200. Published
  201. Published

    Statistical optimisation parameter for lean grade self-reducing nuggets by surface response modelling to produce pig iron

    Biswas, C., Samanta, S., Bhattacharyya, A., Ghosh Choudhuri, M. & Dey, R., 2016, In : Transactions of the institutions of mining and metallurgy. Section C, Mineral processing and extractive metallurgy . Transactions of the Institutions of Mining and Metallurgy: Section C, p. 1 10 p.

    Research output: Contribution to journalArticleResearchpeer-review

  202. Published
  203. 2015
  204. Published

    Behavior of Chromium, Nickel, Lead, Zinc, Cadmium, and Mercury in the Blast Furnace - A Critical Review of Literature Data and Plant Investigations

    Trinkel, V., Mallow, O., Thaler, C., Schenk, J., Rechberger, H. & Fellner, J., 19 Nov 2015, In : Industrial and engineering chemistry research. 54, 47, p. 11759-11771 13 p.

    Research output: Contribution to journalArticleResearchpeer-review

  205. Published
  206. Published
  207. Published

    Thermodynamic optimization of individual steel databases by means of systematic DSC measurement

    Presoly, P., Six, J. & Bernhard, C., 3 Nov 2015, International Conference on Materials, Processing and Product Engineering. Leoben, 8 p. 29

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  208. Published
  209. Published

    Effect of variable process conditions on the reactivity, strength and structural features of blast furnace cokes

    Bhattacharyya, A., Rantitsch, G., Schenk, J., Thaler, C. & Stocker, H., 5 Oct 2015, p. 606-607.

    Research output: Contribution to conferencePaperResearchpeer-review

  210. Published

    Kinetics of lime dissolution in steelmaking slags

    Cheremisina, E., Schenk, J., Tappeiner, T., Sormann, A. & Wimmer, G., 5 Oct 2015, Asia Steel International Conference 2015 Proceedings. 2 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  211. Published

    CHALLENGES AND LIMITING FACTOS FOR THE RECYCLING OF STEEL SCRAP IN EUROPE

    Bundschuh, P. & Schenk, J., 1 Oct 2015, MINING THE TECHNOSPHERE: "Drivers and Barriers, Challenges and Opportunities". Lederer, J., Laner, D., Rechberger, H. & Fellner, J. (eds.). 1 ed. Wien, Vol. 1. p. 131-135 5 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  212. Published
  213. Published

    Reduction Behavior and Structural Evolution of Iron Ores in Fluidized Bed Technologies. Part 1: Method for the Determination

    Skorianz, M., Mali, H., Pichler, A., Plaul, F., Schenk, J. & Weiss, B., 28 Sep 2015, In : Steel research international. 87, 5, p. 633-641 9 p.

    Research output: Contribution to journalArticleResearchpeer-review

  214. Published

    A numerical solidification model as link between laboratory experiments and the continuous casting process

    Riedler, M., Arth, G., Bernhard, C., Presoly, P., You, D. & Ilie, S., 24 Sep 2015.

    Research output: Contribution to conferencePresentationResearch

  215. Published

    Formation of shrinkage porosity during solidification of steel: Numerical simulation and experimental validation

    Riedler, M., Michelic, S. & Bernhard, C., 23 Sep 2015, Proceedings of the 2015 International Symposium on Liquid Metal Processing and Casting.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  216. Published

    Production of Jumbo Blooms by Semi-Continuous Casting: Challenges, Feasibility and Future Potential

    Michelic, S. & Riedler, M., 23 Sep 2015, Proceedings of the 2015 International Symposium on Liquid Metal Processing and Casting.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  217. Published

    In-situ observation of the behavior of non-metallic inclusions at different interfaces in the system steel-slag-refractory

    Michelic, S., Dieguez Salgado, U. & Bernhard, C., 21 Sep 2015, LMPC 2015: Proceedings of the 2015 International Symposium on Liquid Metal Processing and Casting. p. 143-152 10 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  218. Published

    On the importance of thermodynamic investigations for the re-assessment of selected ternary Fe-base systems

    Presoly, P. & Bernhard, C., 20 Sep 2015, Proceedings of the 2015 International Symposium on Liquid Metal Processing and Casting. Leoben, Vol. 2015.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  219. Published

    Charakterisierung von Eisenerzträgern mittels Bildverarbeitung

    Kain - Bückner, B., Hanel, M. & Mali, H., 10 Sep 2015, Mitt. Österr. Miner. Ges..

    Research output: Chapter in Book/Report/Conference proceedingChapter

  220. Published

    Fabrication of plain carbon steel/high chromium white cast iron bimetal by a liquid–solid composite casting process

    Javaheri, V., Rastegari, H. & Naseri Seftejani, M., Sep 2015, In : International Journal of Minerals, Metallurgy and Materials. p. 950-955 6 p.

    Research output: Contribution to journalArticleResearchpeer-review

  221. E-pub ahead of print

    A Novel Devolatilization Technique of Pre-reduction of Iron Ore Using Lean Grade Coal

    Biswas, C., Bhattacharyya, A., Das, G. C., Ghosh Choudhuri, M. & Dey, R., 20 Aug 2015, In : Berg- und hüttenmännische Monatshefte : BHM. 161.2016, 3, p. 95-101 7 p.

    Research output: Contribution to journalArticleResearchpeer-review

  222. Published

    Analysis of Solidification of High Manganese Steels Using Improved Differential Thermal Analysis Method

    Zhuang, C., Liu, J., Bernhard, C. & Presoly, P., 1 Aug 2015, In : Journal of iron and steel research international. 22, 8, p. 709-714 6 p., 8.

    Research output: Contribution to journalArticleResearchpeer-review

  223. Published
  224. Published

    Untersuchung der Wirkung von Legierungselementen auf die peritektische Phasenumwandlung in Stählen

    Presoly, P. & Bernhard, C., Jul 2015, In : Berg- und hüttenmännische Monatshefte : BHM. 160, 07, p. 337-341 5 p.

    Research output: Contribution to journalArticleResearchpeer-review

  225. Published

    Gas Purging Benefits in the BOF: A Focus on Material Efficiency and CO2 Emission Reduction

    Kollmann, T., Bundschuh, P., Samm, V., Schenk, J. & Kirschen, M., 17 Jun 2015, Procdeedings 2nd European Steel Technology and Application Days ESTAD. Düsseldorf, p. 1-7 7 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  226. Published
  227. Published

    Simulation des Strangrichtens in einem In-Situ Biegeversuch

    Krobath, R., 19 May 2015.

    Research output: Contribution to conferencePosterResearchpeer-review

  228. Published

    Effect of Interaction Area on the Thermodynamics and Kinetic Modelling of BOF Converter

    Bundschuh, P., Schenk, J., Schütt, S., Sormann, A. & Panhofer, H., 12 May 2015, Proceedings of The 6th International Congress on the Science and Technology of Steelmaking. p. 151 - 154 4 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  229. Published

    Technologies for Low Carbon Fe-Mn-Si-Al TWIP Steel Smelting

    Liu, J., Liu, H. & Michelic, S., 12 May 2015.

    Research output: Contribution to conferencePosterResearch

  230. Published

    Chemistry vs. Morphology vs. Reducibility — Some (Non-) Existing Correlations

    Hanel, M., Kain-Bückner, B., Schenk, J., Mali, H., Hauzenberger, F., Thaler, C. & Stocker, H., 4 May 2015, AISTech 2015 & ICSTI Proceedings. p. 593-602 10 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  231. Published

    Experimental Analysis of the Interfacial Wetting Phenomena Between Slag and Coke Surface Under Simulated Conditions of the Bosh Region of Blast Furnace

    Bhattacharyya, A., Schenk, J., Arth, G., Stocker, H. & Thaler, C., 4 May 2015, AISTech 2015 & ICSTI Proceedings. p. 713-721 077_30431-5159

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  232. Published

    Gas Purging Benefits in the BOF: A Focus on Material Efficiency and CO2 Emission Reduction

    Kollmann, T., Bundschuh, P., Samm, V. & Kirschen, M., 4 May 2015, AISTech 2015 & ICSTI Proceedings. p. 2031 - 2040 10 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  233. Published
  234. Published

    Clogging - Intensiv beforscht, viel diskutiert, erfolgreich gelöst?

    Michelic, S., 13 Apr 2015.

    Research output: Contribution to conferencePresentationResearch

  235. Published

    A novel Approach for the Simulation of Surface Crack Formation in Continuous Casting

    Krajewski, P., Krobath, R., Bernhard, C., Miettinen, J., Louhenkilpi, S., Ilie, S. & Schaden, T., Mar 2015, In : Berg- und hüttenmännische Monatshefte : BHM. 160, 3, p. 109-116 8 p.

    Research output: Contribution to journalArticleResearchpeer-review

  236. Published

    Experimental und Numerical Investigations on Hot Tearing during Continuous Casting

    Arth, G., Ilie, S., Pierer, R. & Bernhard, C., Mar 2015, In : Berg- und hüttenmännische Monatshefte : BHM. 160, 3, p. 103-108 6 p.

    Research output: Contribution to journalArticleResearchpeer-review

  237. Published
  238. Published

    Gas purging benefits in the BOF: A focus on material efficiency and CO2 emission reduction

    Kollmann, T., Bundschuh, P., Samm, V., Schenk, J. & Kirschen, M., 1 Jan 2015, AISTech 2015 - Proceedings of the Iron and Steel Technology Conference and ICSTI 2015. Vol. 2. p. 2031-2040 10 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  239. Published

    Impact of different heat capacity functions on thermodynamic and kinetic modeling of the basic oxygen furnace

    Bundschuh, P., Schenk, J., Schütt, S., Panhofer, H. & Sormann, A., 1 Jan 2015, AISTech 2015 - Proceedings of the Iron and Steel Technology Conference and ICSTI 2015. Vol. 2. p. 2090-2098 9 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  240. Published

    A geological excursion to the mining areas of South Africa

    Mogessie, A., Hauzenberger, C., Raic, S., Melcher, F., Prochaska, W., Mali, H., Binder, H., Dietmayer-Kräutler, M., Friedam, F. C., Haas, M., Hampl, F., Hanke, G. E., Hasenburger, W., Kaltenböck, H., Onuk, P., Pamsl, A., Pongratz, K., Schifko, T., Schilli, S., Schwabl, S., Tauchner, C., Wallner, D., Hentschke, J., Gauert, C., Schantl, P., Belohlavek, L., Ciriello, A., Daghighi, D., Fercher, B., Goetschl, K., Graber, H., Mandl, M., Preissegger, V., Raab, G., Rauschenbusch, F., Sattler, T. M., Schorn, S., Simic, K., Wedenig, M. & Wiesmair, S., 2015, In : Mitteilungen der Österreichischen Mineralogischen Gesellschaft. 161, p. 175-219

    Research output: Contribution to journalArticleTransfer

  241. Published

    Characterization of TiN, TiC and Ti(C,N) in titanium-alloyed ferritic chromium steels focusing on the significance of different particle morphologies

    Michelic, S., Loder, D., Reip, T., Ardehali Barani, A. & Bernhard, C., 2015, In : Materials characterization. 100, p. 61-67

    Research output: Contribution to journalArticleResearchpeer-review

  242. Published
  243. Published
  244. Published

    Gas Purging Benefits in the BOF: A Focus on Material Efficiency and CO2 Emission Reduction

    Kollmann, T., Bundschuh, P., Samm, V., Schenk, J. & Kirschen, M., 2015, In : RHI bulletin : the journal of refractory innovations. 1, p. 37-42 6 p.

    Research output: Contribution to journalArticleResearch

  245. Published
  246. Published

    Investigating the effective factors on chromium-molybdenum steel shell liner fracture in SAG mill of Sarcheshmeh copper complex

    Javaheri, V., Rastegari, H. & Naseri Seftejani, M., 2015.

    Research output: Contribution to conferencePaperResearchpeer-review

  247. Published

    Investigation of wear mechanism in quenched and tempered medium carbon-high chromium martensitic steel using dry sand/rubber wheel

    Sehri, S. M., Ghayour, H., Amini, K., Naseri Seftejani, M., Rastegari, H. & Javaheri, V., 2015, In : Iron and Steel Society of Iran (ISSI). 12, 2, p. 17-23

    Research output: Contribution to journalArticleResearchpeer-review

  248. Published
  249. Published
  250. Published

    Optimization of processing parameters on an ESP line

    Dierer, F., 2015

    Research output: ThesisMaster's Thesis

  251. Published

    Specific use of non-metallic inclusions for the formation of acicular ferrite structures: thermodynamic modeling and laboratory experiments

    Loder, D. & Michelic, S., 2015, Proceedings of 9th International Conference on Clean Steel.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  252. Published

    Standardized Iron Ore Characterization Methodology for Metallurgy

    Kolb, F., Mali, H., Pichler, A. & Schenk, J., 2015, In : Practical metallography = Praktische Metallographie. 52, p. 5-20

    Research output: Contribution to journalArticleResearchpeer-review

  253. Published

    Technologievergleich von Elektrostahlerzeugungsverfahren

    Aichinger, M., 2015

    Research output: ThesisMaster's Thesis

  254. Published

    Thermochemical modelling of the alkali balance in modern blast furnaces

    Pichler, A., Schenk, J., Hauzenberger, F., Thaler, C. & Stocker, H., 2015, ASIA Steel International Conference 2015 - Proceedings. 7A-7: Iron and Steel Institute of Japan

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  255. Published

    Untersuchung von Erstarrungsphänomenen im Blockguss

    Penz, F., 2015

    Research output: ThesisMaster's Thesis

  256. 2014
  257. Published

    The Effect of Nb and Ti on Structure and Mechanical Properties of 12Ni-25Cr-0.4C Austenitic Heat-Resistant Steel after Aging at 900 °C for 1000 h

    Javaheri, V., Shahri, F., Mohammadnezhad, M., Tamizifar, M. & Naseri Seftejani, M., Oct 2014, In : Journal of Materials Engineering and Performance. 23, 10, p. 3558-3566 9 p.

    Research output: Contribution to journalArticleResearchpeer-review

  258. Published

    EVALUATION OF THE REDUCTION BEHAVIOR OF HEMATITIC IRON ORE UNDER BLAST FURNACE NEAR CONDITIONS

    Baumgartner, K. & Hanel, M., 21 May 2014, p. 135-138. 4 p.

    Research output: Contribution to conferencePosterResearchpeer-review

  259. Published
  260. Published

    Editorial

    Kepplinger, W. & Schenk, J., 1 Apr 2014, In : Steel research international. 85, 4, 1 p.

    Research output: Contribution to journalEditorialResearchpeer-review

  261. Published

    Effect of nucleation undercooling on the kinetics and mechanism of the peritectic phase transition in steel

    Griesser, S., Bernhard, C. & Dippenaar, R., 1 Jan 2014, In : Acta Materialia. 81, p. 111-120 10 p.

    Research output: Contribution to journalArticleResearchpeer-review

  262. Published

    A novel approach for the simulation of surface crack formation in continuous casting

    Krajewski, P., Krobath, R., Bernhard, C., Miettinen, J., Louhenkilpi, S., Ilie, S. & Schaden, T., 2014, In : Berg- und hüttenmännische Monatshefte : BHM. p. x-y

    Research output: Contribution to journalArticleResearchpeer-review

  263. Published

    A novel approach for the simulation of surface crack formation in continuous casting

    Krajewski, P., Krobath, R., Bernhard, C., Miettinen, J., Louhenkilpi, S., Ilie, S. & Schaden, T., 2014, Proceedings of the 8th European Continuous Casting Conference. p. x-y

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  264. Published

    Assessing the quality of metallurgical coke by Raman Spectroscopy

    Rantitsch, G., Bhattacharyya, A., Schenk, J. & Lünsdorf, K., 2014, In : International journal of coal geology. 130, p. 1-7

    Research output: Contribution to journalArticleResearchpeer-review

  265. Published

    Atom probe investigations in low carbon steel on Arvedi endless strip production line

    Mendez Martin, F. & Bragin, S., 2014.

    Research output: Contribution to conferencePosterResearchpeer-review

  266. Published

    Austenite Grain Growth and the Surface Quality of Continuously Cast Steel

    Dippenaar, R., Bernhard, C., Schider, S. & Wieser, G., 2014, In : Metallurgical and Materials Transactions B: Process Metallurgy and Materials Processing Science. 45B, p. 409-418

    Research output: Contribution to journalArticleResearchpeer-review

  267. Published

    Behaviour of chars from non-coking coals under different conditions of smelting reduction processes

    Bhattacharyya, A., Schenk, J., Rantitsch, G. & Heckmann, H., 2014, Proceedings of 4th VDEh-CSM Conference on Metallurgical Fundamentals. p. 58-65

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  268. Published

    Bewertung der Reduzierbarkeit und Zerfallsstabilität von Sinter und Stückerz (als Rostbelag verwendet)

    Hanel, M., 2014

    Research output: Book/ReportCommissioned reportTransferpeer-review

  269. Published

    Changing of scrap handling to increase the net value of Villares Metals

    Krapscha, C., 2014, 152 p.

    Research output: ThesisDiploma Thesis

  270. Published

    Characterization and assessment of lump COREX® chars under various process conditions

    Bhattacharyya, A., Schenk, J., Rantitsch, G. & Heckmann, H., 2014, ESTAD and JSI 2014 - Abstract Booklet. p. 324-325

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  271. Published
  272. Published

    Characterization of acicular ferrite microstructures using etching methods, optical microscopy and HT-LSCM

    Loder, D., Michelic, S. & Bernhard, C., 2014, Sonderbände der praktischen Metallographie - Fortschritte in der Metallographie. p. 125-130

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  273. Published

    Continuous Casting of Hypo-peritectic Steels: Mould Thermal Monitoring and DSC-analysis

    Presoly, P., Xia, G., Reisinger, P. & Bernhard, C., 2014, In : Berg- und hüttenmännische Monatshefte : BHM. 159, p. 430-437

    Research output: Contribution to journalArticleResearchpeer-review

  274. Published

    Diffusional constrained crystal nucleation during peritectic phase transitions

    Griesser, S., Reid, M., Bernhard, C. & Dippenaar, R., 2014, In : Acta materialia. 67, p. 335-341

    Research output: Contribution to journalArticleResearchpeer-review

  275. Published

    Dissolution behavior of CaO in BOF-process and its effect on the kinetics of metallurgical reactions

    Bundschuh, P., Schenk, J., Hiebler, M., Panhofer, H., Sormann, A. & Klösch, G., 2014, Seminar on Metallurgical Fundamentals. p. 106-118

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  276. Published

    Effect of alkaline elements on the reactivity, strength and structural properties of blast furnace cokes

    Bhattacharyya, A., Schenk, J., Rantitsch, G., Thaler, S. & Stocker, H., 2014, Proceedings of SHMD 2014. p. 412-412

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  277. Published
  278. Published
  279. Published

    Entwicklung von Stahl-Keramik-Verbunden mit verminderter Dichte

    Arth, G., 2014.

    Research output: Contribution to conferencePosterResearchpeer-review

  280. Published

    Entwicklung von Stahl-Keramik-Verbunden mit verminderter Dichte

    Arth, G., Bernhard, C., Samek, L. & Samoilov, A., 2014, In : Berg- und hüttenmännische Monatshefte : BHM. 159, p. 291-293

    Research output: Contribution to journalArticleResearchpeer-review

  281. Published

    Entwicklung von Stahl-Keramik-Verbunden mit verminderter Dichte

    Arth, G., Bernhard, C., Samek, L. & Samoilov, A., 2014, Forum für Metallurgie und Werkstofftechnik 2014 mit Zukunftskonferenz. p. xx-xx

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  282. Published

    Experimental study on the formation of non-metallic inclusions acting as nuclei for acicular ferrite in HSLA steels through specific deoxidation practice and defined cooling conditions

    Michelic, S., Loder, D., Arth, G. & Bernhard, C., 2014, Materials Science Forum: Proceedings THERMEC 2013. Vol. 783-786. p. 1079-1084

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  283. Published

    Experimental und numerical investigations on hot tearing during continuous casting of steel

    Arth, G., Bernhard, C., Ilie, S., Schaden, T. & Pierer, R., 2014, Conference Proceedings of the 8th ECCC. p. 1-8

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  284. Published

    Experimentelle Simulation der Oberflächenrissbildung

    Krajewski, P. & Krobath, R., 2014.

    Research output: Contribution to conferencePosterResearchpeer-review

  285. Published

    Experimentelle Simulation der Oberflächenrissbildung beim Stranggießprozess mit Hilfe des IMC-B Versuchs

    Krajewski, P., Bernhard, C., Krobath, R., Schaden, T. & Ilie, S., 2014, In : Berg- und hüttenmännische Monatshefte : BHM. 159, p. 304-305

    Research output: Contribution to journalArticleResearchpeer-review

  286. Published

    IMC-B - a new experimental method to predict the crack susceptiblity under continuous casting conditions

    Krajewski, P., Bernhard, C., Krobath, R., Schaden, T. & Ilie, S., 2014, 1st ESTAD &31st JSI. p. 184-185

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  287. Published

    Identification of peritectic steel grades by thermal mould monitoring and DSC measurements

    Presoly, P., Bernhard, C. & Xia, G., 2014, Proceedings of the 8th European Continuous Casting Conference. p. x-y

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  288. Published

    Image analysis for evaluation of iron ore carriers

    Kain-Bückner, B., Mali, H., Schenk, J., Hanel, M., Thaler, C., Stocker, H. & Hauzenberger, F., 2014, Sonderbände der Praktischen Metallographie 46. p. 215-218

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  289. Published

    In situ observation of acicular ferrite formation using HT-LSCM: possibilities, challenges and influencing factors

    Loder, D., Michelic, S., Mayerhofer, A., Bernhard, C. & Dippenaar, R., 2014, Proceedings of MS&T14 . p. 469-476

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  290. Published
  291. Published

    Influence of CaO dissolution on the kinetics of metallurgical reactions in BOF-process

    Bundschuh, P., Schenk, J., Hiebler, M., Panhofer, H. & Sormann, A., 2014, Influence of CaO dissolution on the kinetics of metallurgical reactions in BOF-process. p. 89-100

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  292. Published

    Influence of alkalis on mechanical properties of lumpy iron carriers during reduction

    Pichler, A., Schenk, J., Hanel, M., Mali, H., Thaler, C., Hauzenberger, F. & Stocker, H., 2014, Conference Proceedings to the 23rd International Conference on Metallurgy and Materials. p. 40-40

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  293. Published

    Influence of thin slab thickness on final strip property in Arvedi ESP plant

    Linzer, B., Watzinger, J., Bragin, S., Bernhard, C. & Bianchi, A., 2014, 8th European Continuous Casting Conference. p. 1-8

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  294. Published
  295. Published

    Preparation, reduction and melting of manganese containing iron ore pellets

    Hanel, M., 2014

    Research output: Book/ReportCommissioned reportTransferpeer-review

  296. Published

    Process behaviour of fine iron ores during reduction in a fluidized bed reactor and characterization of the morphological evolution

    Pichler, A., 2014,

    Proceedings of the 1st ESTAD & 31 JSI Conference

    .
    p. 100-102

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  297. Published

    Reducibility of a Hematitic Lump Ore at different near Blast Furnace Conditions

    Hanel, M., Schenk, J., Mali, H., Hauzenberger, F., Thaler, C. & Stocker, H., 2014, 1st ESTAD & 31st JSI . p. 1-2

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  298. Published

    Solidification Modeling on Bloom Casters - Different Methods of Result Verification and Their Application

    Michelic, S., Pierer, R. & Riedler, M., 2014.

    Research output: Contribution to conferencePresentationResearch

  299. Published

    The Use of HT-LSCM for the In Situ Observation of Acicular Ferrite

    Loder, D., Michelic, S. & Bernhard, C., 2014.

    Research output: Contribution to conferencePosterResearch

  300. Published
  301. Published

    Thermodynamic and Kinetic Model of the Converter Steelmaking Process. Part 1: The Description of the BOF Model

    Lytvynyuk, Y., Schenk, J., Hiebler, M. & Sormann, A., 2014, In : Steel research international. 85, p. 537-543

    Research output: Contribution to journalArticleResearchpeer-review

  302. Published

    Thermodynamic and Kinetic Model of the Converter Steelmaking Process. Part 2: The Model Validation

    Lytvynyuk, Y., Schenk, J., Hiebler, M. & Sormann, A., 2014, In : Steel research international. 85, p. 544-563

    Research output: Contribution to journalArticleResearchpeer-review

  303. Published
  304. Published
  305. Published

    Vergleichsstudie martensitischer korrosionsbeständiger Stähle

    Gröblinger, H. H., 2014, 108 p.

    Research output: ThesisMaster's Thesis

  306. Published
  307. Published

    Ätzmethoden für die computergestützte Analyse von Azikularferrit im Gefüge

    Otto, C., Loder, D., Michelic, S. & Bernhard, C., 2014.

    Research output: Contribution to conferencePosterResearch

  308. 2013
  309. Published

    Verfahren zur Erhöhung der Eindringtiefe eines Sauerstoffstrahles

    Kepplinger, W., Plaul, J-F., Millner, R., Schenk, J., Wieder, K. & Wurm, J., 15 Jun 2013, Patent No. A 1422/2010

    Research output: Patent

  310. Published

    ARVEDI ESP PROCESS – AN ULTIMATE TECHNOLOGY CONNECTING CASTING AND ROLLING IN ENDLESS MODE

    Bragin, S., Rimnac, A., Linzer, B., Bianchi, A., Mantova, A., Rizzi, A. & Bernhard, C., 2013, Rolling 2013. p. 1-13

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  311. Published

    Application of Thermodynamic and Kinetic Model for Converter Steelmaking to Optimize Manganese Yield in Crude Steel

    Lytvynyuk, Y., Schenk, J., Hiebler, M., Mizelli, H. & Sormann, A., 2013, In : Berg- und hüttenmännische Monatshefte : BHM. p. 457-458

    Research output: Contribution to journalArticleResearchpeer-review

  312. Published
  313. Published

    Characterization of Different Lump Ore Brands According to Industrial Scale Process Conditions by Means of Reducibility Testing and Morphological Investigation

    Hanel, M., Skorianz, M., Schenk, J., Mali, H., Hauzenberger, F., Stocker, H. & Thaler, C., 2013, AISTech 2013 Proceedings. p. 447-456

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  314. Published

    Characterization of burden material for ironmaking by means of reduction tests with morphological characterization

    Hanel, M., Mali, H., Thaler, C., Stocker, H., Hauzenberger, F., Skorianz, M. & Schenk, J., 2013, The ISIJ-VDEh-Jernkontoret Joint Symposium. p. 145-153

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  315. Published

    Charakterisierung von Rohmaterialien für die Eisenerzherstellung mit Bildverarbeitung

    Hanel, M., Kain-Bückner, B., Schenk, J., Hauzenberger, F., Stocker, H. & Thaler, C., 2013, In : Berg- und hüttenmännische Monatshefte : BHM. 158, p. 445-446

    Research output: Contribution to journalArticleResearchpeer-review

  316. Published

    Comparison of morphology of sulfides in free cutting non-quenched and tempered steel

    You, D., Yue, F., Huajie, W. U., Cui, H., Tian, E. & Wang, Z., 2013, 宝钢学术年会.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  317. Published

    Comprehensive Investigations of new Filler Materials for Welding of High Strength Steels

    Schnitzer, R., Rauch, R., Ernst, W., Wagner, J., Baumgartner, S., Leitner, M., Stoschka, M., Schlagradl, T., Schneider, R. & Bernhard, C., 2013, Proceedings of the 3rd International Conference. p. 323-332

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  318. Published
  319. Published

    Effect of titanium on the solidification and postsolidification microstructure of high-strength steel welds

    Vanovsek, W., Bernhard, C., Fiedler, M. & Schnitzer, R., 2013, In : Welding in the world. 57, p. 665-674

    Research output: Contribution to journalArticleResearchpeer-review

  320. Published

    Effectiveness of improvised gas absorption techniques for emergency responders at releases of toxic gases

    Kern, H., Taferner, M. & Raupenstrauch, H., 2013, 2013 AIChE Spring Meeting & 9th Global Congress on Process Safety. p. 1-2

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  321. Published

    Enhancement of Efficiency in Crude Iron Production Using an Increased Amount of Pellet Feed

    Schmidt, L., Köpplmayr, D., Plaul, F. & Schenk, J., 2013, In : Berg- und hüttenmännische Monatshefte : BHM. 158, p. 449-450

    Research output: Contribution to journalArticleResearchpeer-review

  322. Published

    Entwicklung von Stahl-Keramik Verbunden mit verminderter Dichte

    Arth, G., 2013, 1 p.

    Research output: ThesisDoctoral Thesis

  323. Published
  324. Published
  325. Published

    IMC-B – ein neuer Ansatz zur Untersuchung der Oberflächenrissbildung im Stranggießprozess

    Krajewski, P., Bernhard, C., Pierer, R., Schneller, F. & Schaden, T., 2013, In : Berg- und hüttenmännische Monatshefte : BHM. p. 108-115

    Research output: Contribution to journalArticleResearchpeer-review

  326. Published
  327. Published

    In-situ Beobachtung von Phasenumandlungen in Stählen

    Schider, S., Gamsjäger, E., Michelic, S. & Bernhard, C., 2013, Prakt. Met. Sonderband 45. p. 139-144

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  328. Published
  329. Published

    Inclusion Removal and Modification in Remelting Processes with Special Regard to Inclusion Dissolution in CaO-Al2O3-CaF2 Slags

    Michelic, S., Schider, S. & Bernhard, C., 2013,

    INTECO Melting, Refining, Casting & Remelting Symposium 2013 - Proceedings

    .
    p. 172-184

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  330. Published

    Influence of aluminum content on the characterization of microstructure and inclusions in high-strength steel welds

    Vanovsek, W., Bernhard, C., Fiedler, M. & Posch, G., 2013, In : Welding in the world. 57, p. 73-83

    Research output: Contribution to journalArticleResearchpeer-review

  331. Published

    Modellierung des aluminothermischen Heizens von Stahlschmelzen

    Doppler, T., 2013

    Research output: ThesisMaster's Thesis

  332. Published
  333. Published

    Reduction properties of pellets composed of siderite-manganese ore

    Hanel, M. & Skorianz, M., 2013

    Research output: Book/ReportCommissioned reportTransferpeer-review

  334. Published

    Research on Inclusions in Non-quenched and tempered Sulfur-bearing Steel for Autos

    You, D., Cui, H., Wu, H., Yue, F., Tian, E. & Wang, Z., 2013, In : Iron, steel, vanadium, titanium.

    Research output: Contribution to journalArticleResearchpeer-review

  335. Published

    Sorption Of Gallium from the Alkali solutions Based on Anionites

    Cheremisina, E., 2013, In : Russian Journal of Non-Ferrous Metals. 54, ISSN 1067-8212, p. 201-108

    Research output: Contribution to journalArticleResearchpeer-review

  336. Published

    Structural Characterization of Metallurgical Coke by Raman Spectroscopy

    Rantitsch, G., Schenk, J., Lünsdorf, K., Bhattacharyya, A., Hanel, M., Wallner, D. & Kaltenböck, H., 2013, In : Berg- und hüttenmännische Monatshefte : BHM. 158, p. 447-448

    Research output: Contribution to journalArticleResearchpeer-review

  337. Published

    Systematische Optimierung von Stahleigenschaften durch nichtmetallische Einschlüsse

    Loder, D., Michelic, S. & Bernhard, C., 2013.

    Research output: Contribution to conferencePosterResearch

  338. Published
  339. Published

    Thermodynamic and kinetic modeling of metallurgical reactions

    Lytvynyuk, Y., 2013, 129 p.

    Research output: ThesisDoctoral Thesis

  340. Published

    Verhalten von Koks unter hochofenähnlichen Bedingungen

    Paul, A., 2013

    Research output: ThesisMaster's Thesis

  341. 2012
  342. Published
  343. Published

    Improving the analytical characteristics of adsorption semiconductor sensors based on adsorbtion SnO2 using photon simulation

    Cheremisina, E., 5 Sep 2012, In : Russian Journal of Physical Chemistry. 6, p. 228-230 3 p.

    Research output: Contribution to journalArticleResearchpeer-review

  344. Published

    Verfahren und Vorrichtung zur Herstellung von zumindest teilweise reduzierten Metallerzen und/oder Metallen

    Schenk, J., Eder, T., Hauzenberger, F. & Millner, R., 15 Mar 2012, Patent No. A795/2010

    Research output: Patent

  345. Published

    Integration of the blast furnace route and the FINEX ®- process for low CO 2 hot metal production

    Thaler, C., Tappeiner, T., Schenk, J. L., Kepplinger, W. L., Plaul, J. F. & Schuster, S., 1 Feb 2012, In : Steel research international. 83, 2, p. 181-188 8 p.

    Research output: Contribution to journalArticleResearchpeer-review

  346. Published

    A modified cellular automaton method for polydimensional modelling of dendritic growth and microsegregation in multicomponent alloys

    Michelic, S., Thuswaldner, J. & Bernhard, C., 2012, IOP Conf. Series: Materials Science and Engineering. p. 1-9

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  347. Published

    Anwendungsbeispiele für die Verwendung neuer analytischer Prüftechniken bei Hochleistungsstählen

    Werl, R., Klösch, G., Winkler, W., Pissenberger, A., Egger, M., Aigner, S., Pühringer, J., Michelic, S., Bernhard, C., Schützenhöfer, W., Schneider, R. & Schüller, C., 2012, In : Berg- und hüttenmännische Monatshefte : BHM. 157, p. 194-203

    Research output: Contribution to journalArticleResearchpeer-review

  348. Published

    Austenite grain growth and the surface quality of continuously cast steel

    Dippenaar, R., Bernhard, C., Schider, S. & Wieser, G., 2012, 15th International Conference on Advances in Materials Processing Technologies. p. ID-10318

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  349. Published
  350. Published
  351. Published

    Charakterisierung von nichtmetallischen Einschlüssen in Titan legierten ferritischen Chromstählen

    Loder, D., Michelic, S., Reip, T. & Bernhard, C., 2012.

    Research output: Contribution to conferencePosterResearchpeer-review

  352. Published
  353. Published

    Classification of fine ores regarding their reducibility with tests in a lab scale fluidized bed reactor and petrographical analysis

    Skorianz, M., Mali, H., Schenk, J., Plaul, J. F. & Thaler, C., 2012, AIST 2012 Proceedings. p. 531-542

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  354. Published
  355. Published

    Comparison of Basic Oxygen Furnace Bottom Gas Purging Options

    Kollmann, T., Jandl, C., Schenk, J., Mizelli, H., Höfer, W., Viertauer, A. & Hiebler, M., 2012, In : RHI bulletin : the journal of refractory innovations. 1, p. 8-15

    Research output: Contribution to journalArticleResearchpeer-review

  356. Published

    Continuous Casting Simulation Secondary Cooling

    Arth, G., 2012.

    Research output: Contribution to conferencePosterResearchpeer-review

  357. Published

    Critical evaluation of prospects and limitations of steel cleanness characterisation using automated SEM/EDS analysis

    Michelic, S., Bernhard, C., Wieser, G. & Lederhaas, B., 2012, Proceedings of the 8th International Conference on Clean Steel. p. 1-11

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  358. Published

    Determination of Decisive Factors Influencing the Inclusion Landscape in Electroslag Remelted Ingots

    Michelic, S., Tanzer, R., Schützenhöfer, W. & Bernhard, C., 2012, Proceedings of the 1st International Conference on Ingot Casting, Rolling and Forging. p. 1-10

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  359. Published

    Dynamic Refractory Wear Test Method for Magnesia-Carbon Products

    Goriupp, J., Rief, A. & Schenk, J., 2012, In : RHI bulletin : the journal of refractory innovations. 1, p. 58-62

    Research output: Contribution to journalArticleResearchpeer-review

  360. Published

    EFFECT OF HIGH-STRENGTH FILLER METALS ON FATIGUE

    Stoschka, M., Leitner, M., Fössl, T. & Posch, G., 2012, In : Welding in the world. 56, 3-4, p. 20-29

    Research output: Contribution to journalArticleResearchpeer-review

  361. Published
  362. Published
  363. Published
  364. Published

    Evaluation of reducibility of iron ore fines by reduction tests under fluidized bed conditions and petrographical investigations

    Skorianz, M., Mali, H., Schenk, J., Plaul, J. F., Weiss, B. & Hanel, M., 2012, Proceedings of Asia Steel Conference 2012. p. 000-000

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  365. Published

    Experimental investigation into the influence of Ti on the clogging of ULC steels in continuous casting

    Bernhard, C., Xia, G., Egger, M., Pissenberger, A. & Michelic, S., 2012, Proceedings of the AISTech 2012. p. 2191-2200

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  366. Published

    Experimental investigations into surface crack formation under continuous casting conditions

    Krajewski, P., Pierer, R., Bernhard, C., Schaden, T. & Ilie, S., 2012, 5th International Congress on the Science and Technology of Steelmaking. p. Paper-1332

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  367. Published

    Experimental study on the influence of the Ti/Al ratio and different addition practices on the inclusion landscape in ULC steels

    Michelic, S., Xia, G. & Bernhard, C., 2012, Proceedings of the ASIA Steel International Conference 2012. p. 1-6

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  368. Published

    Gießwalzen von HSLA Stählen

    Bragin, S., 2012

    Research output: ThesisDoctoral Thesis

  369. Published

    Identification of defect prone peritectic steel grades by analyzing the high temperature phase transformations

    Presoly, P., Pierer, R. & Bernhard, C., 2012, Defects and Properties of Cast Metals - Solidification Structure and Segregation. p. 299-306

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  370. Published

    In-situ quantification of micro-segregation that occurs during the solidification of steel

    Griesser, S., Reid, M., Pierer, R., Bernhard, C. & Dippenaar, R., 2012, 5th International Conference on the Science and Technology of Steelmaking. p. Paper-1143

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  371. Published

    Inclusion Metallurgy

    Michelic, S., 2012.

    Research output: Contribution to conferencePosterResearchpeer-review

  372. Published

    Integration of the Blast Furnace Route and the FINEX-Process for Low CO2 Hot Metal Production

    Thaler, C., Tappeiner, T., Schenk, J., Kepplinger, W., Plaul, J. F. & Schuster, S., 2012, In : Steel research international. 83, p. 1-8

    Research output: Contribution to journalArticleResearchpeer-review

  373. Published

    Investigation of Alumina Wetting Fe-Ti, Fe-P and Fe-Ti-P Alloys

    Karasangabo, A. & Bernhard, C., 2012, In : Journal of adhesion science and technology. 26, p. 1141-1156

    Research output: Contribution to journalArticleResearchpeer-review

  374. Published

    Linking up of HT-LSCM and DSC measurements to characterize phase diagrams of steels

    Presoly, P., Pierer, R. & Bernhard, C., 2012, IOP Confernece Series (MCWASP XIII) - Materials Science and Engineering. p. 012064-012065

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  375. Published

    Linking up of HT-LSCM and DSC measurements to characterize phase diagrams of steels

    Presoly, P., Pierer, R. & Bernhard, C., 2012.

    Research output: Contribution to conferencePosterResearchpeer-review

  376. Published

    Metal-Matrix-Composites (MMC)

    Arth, G., 2012.

    Research output: Contribution to conferencePosterResearchpeer-review

  377. Published

    Metall-Matrix-Verbundwerkstoffe auf Eisenbasis

    Arth, G., 2012, In : Berg- und hüttenmännische Monatshefte : BHM. 157, p. 306-312

    Research output: Contribution to journalArticleResearchpeer-review

  378. Published

    Mineralogical and structural evolution of iron ore fines reduced in a lab scale fluidized bed reactor

    Skorianz, M., Mali, H., Schenk, J., Plaul, J. F., Pichler, A. & Hanel, M., 2012, Proceedings of 6th International Congress on the Science and Technology of Ironmaking - ICSTI. p. 2347-2359

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  379. Published

    Near surface austenite grain growth in different casting processes for steel: Experiments and modeling

    Bernhard, C., Bragin, S. & Vanovsek, W., 2012, ICS 2012. p. Paper-296

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  380. Published

    Oberflächenrissbildung beim Stranggießen von Stahl

    Krajewski, P., 2012.

    Research output: Contribution to conferencePosterResearchpeer-review

  381. Published

    Quantifying of a Dynamic Refractory Wear Test Setup for MgO-C Products

    Goriupp, J., Rief, A. & Schenk, J., 2012, In : Berg- und hüttenmännische Monatshefte : BHM. 157, p. 340-344

    Research output: Contribution to journalArticleResearchpeer-review

  382. Published

    Reduction properties of iron, titanium and vanadium containing ore from EVRAS Highveld Steel and Vanadium

    Hanel, M., 2012

    Research output: Book/ReportCommissioned reportTransferpeer-review

  383. Published

    Reduktionseigenschaften von Pellets mit unterschiedlichen Mengen an Rücklaufstoffen

    Hanel, M., 2012

    Research output: Book/ReportCommissioned reportTransferpeer-review

  384. Published

    The importance of solidification structure with respect to hot tearing during continuous casting of steels

    Pierer, R., Rauter, W. & Bernhard, C., 2012, TMS 2012. p. 251-258

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  385. Published

    The importance of sulfur in the iron and steel industry

    Goriupp, J. & Schenk, J., 2012, The XII. International Symposium for Desulfurization of Hot Metal and Steel. p. 33-40

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  386. Published

    Thermische Abbildung einer Stranggießanlage für große Rundformate und Verifizierung der Modellergebnisse

    Riedler, M., 2012, 19th International Student's Day of Metallurgy. p. 204-210

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  387. Published

    Thermische Abbildung einer Stranggießanlage für große Rundformate und Verifizierung der Modellergebnisse

    Riedler, M., 2012.

    Research output: Contribution to conferencePosterResearchpeer-review

  388. Published
  389. Published

    Thermische Analyse neuer Stähle

    Presoly, P., 2012.

    Research output: Contribution to conferencePosterResearchpeer-review

  390. Published

    Thermodynamic and Kinetic Simulation of the Manganese Ore Addition in the Steelmaking Converter

    Lytvynyuk, Y., Schenk, J., Hiebler, M. & Mizelli, H., 2012, Asia Steel 2012. p. 49-49

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  391. Published

    Thermodynamische Berechnung der MgO-Sättigung von Pfannenschlacken

    Goriupp, J., 2012.

    Research output: Contribution to conferencePosterResearchpeer-review

  392. Published

    Thermomechanical processing of low-carbon steels on Arvedi endless strip production lines: Modelling and plant results

    Bragin, S., Bernhard, C., Linzer, B., Rimnac, A., Guindani, A. & Venturini, R., 2012, TMP2012 - 4th International Conference on Thermomechanical Processing of Steel. p. Session 9-Paper 1

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  393. Published
  394. Published

    Untersuchungen zur Verminderung der Eisenverluste bei der Roheisenentschwefelung

    Goriupp, J., 2012.

    Research output: Contribution to conferencePosterResearchpeer-review

  395. Published

    Vorhersage zur MgO-Sättigung von sekundärmetallurgischen Stahlwerksschlacken

    Goriupp, J., 2012.

    Research output: Contribution to conferencePosterResearchpeer-review

  396. Published

    Welding procedure for high strength welds and their microstructural evolution during solidification and cooling: IIW Doc. II-C-436-11

    Vanovsek, W., Schnitzer, R., Schlagradl, T., Schneider, R., Posch, G., Schider, S., Bernhard, C., Leitner, H., Rauch, R., Fiedler, M. & Stoschka, M., 2012

    Research output: Non-textual formWeb publication/siteResearch

  397. Published

    Повышение аналитических характеристик полупроводниковых адсорбционных датчиков на основе SnO2 с помощью фотонной симуляции

    Cheremisina, E., 2012, Повышение аналитических характеристик полупроводниковых адсорбционных датчиков на основе SnO2 с помощью фотонной симуляции. 10 ed. Химическая физика экологических процессов, Vol. 31.

    Research output: Chapter in Book/Report/Conference proceedingChapter

  398. 2011
  399. Published

    Verfahren zur Entfernung von CO2 aus Abgasen von Anlagen zur Roheisenherstellung

    Schenk, J. & Millner, R., 15 Apr 2011, Patent No. A.1440/2009

    Research output: Patent

  400. Published

    Düse zum Eindüsen von sauerstoffhaltigem Gas in ein Roheisenaggregat mit Kantenschutz durch auswechselbares Einsatzstück

    Schenk, J., Aichinger, G., Berner, F., Lechner, S., Lekic-Ninic, M., Plaul, J-F., Schmidt, M., Söntgen, T., Vuletic, B., Wieder, K. & Wurm, J., 15 Mar 2011, Patent No. A 1862/2008

    Research output: Patent

  401. Published

    Balance model of the Finex process to estimate the overall energy consumption of the process

    Thaler, C., Schenk, J. & Plaul, J. F., 15 Feb 2011, In : Stahl und Eisen. 131, 2, p. 31-37

    Research output: Contribution to journalArticleResearchpeer-review

  402. Published

    A Study about the Influence of Carbon Content in the Steel on the Casting Behavior

    Xia, G., Bernhard, C., Ilie, S. & Fürst, C., 2011, In : Steel research international. 82, p. 230-236

    Research output: Contribution to journalArticleResearchpeer-review

  403. Published

    Analyse- und Untersuchungsmethoden zur Charakterisierung der Eigenschaften von Hüttenkoks für moderne Hochöfen

    Pichler, A. & Feichtinger, S., 2011, Proc. of 18th International Student’s Day of Metallurgy. p. von-bis

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  404. Published

    Aufheizverhalten von Hot Briquetted Iron (HBI) unter Stickstoff-Atmosphäre

    Skorianz, M., 2011

    Research output: Book/ReportCommissioned reportTransferpeer-review

  405. Published

    Automated SEM/EDX Particle Analysis to Determinate Non-Metallic Inclusions in Steel Samples

    Reischl, M., Frank, G., Martinez, C., Aigner, S., Lederhaas, B. & Michelic, S., 2011, In : Practical metallography = Praktische Metallographie. 12, p. 643-659

    Research output: Contribution to journalArticleResearchpeer-review

  406. Published

    Benchmark Analysis BOF Bottom Purging Final Report

    Kollmann, T., 2011

    Research output: Book/ReportCommissioned reportTransferpeer-review

  407. Published

    Bilanzmodell des FINEX-Prozesses ermöglicht die Abschätzung des Gesamtenergieverbrauchs

    Thaler, C., Schenk, J. & Plaul, J. F., 2011, In : Stahl und Eisen. 131, p. 31-37

    Research output: Contribution to journalArticleResearchpeer-review

  408. Published
  409. Published
  410. Published
  411. Published
  412. Published
  413. Published

    Development of a dynamic refractory wear testing method for MgO-C products

    Goriupp, J., 2011, In : RHI Marketing & Technology Steel News . p. 8-11

    Research output: Contribution to journalArticleResearchpeer-review

  414. Published

    Development, implementation and verification of a transient numeric solidification model of a continuous bloom caster at Voestalpine Stahl Donawitz

    Michelic, S., Bernhard, C., Rauter, W., Erker, M., Brandl, W. & Sormann, A., 2011, 7th European Continuous Casting Conference. p. Paper-02

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  415. Published
  416. Published
  417. Published
  418. Published

    Entwicklung und Erprobung einer dynamischen Testmethode zur chemischen Verschleißsimulation von MgO-C Produkten.

    Goriupp, J., 2011.

    Research output: Contribution to conferencePosterResearchpeer-review

  419. Published

    Erste Ergebnisse des neuen Hochtemperatur-Konfokalmikroskops am Lehrstuhl für Metallurgie

    Bernhard, C., Schider, S., Sormann, A., Xia, G. & Ilie, S., 2011, In : Berg- und hüttenmännische Monatshefte : BHM. 156, p. 161-167

    Research output: Contribution to journalArticleResearchpeer-review

  420. Published

    Erweiterte Untersuchungen zur Eisenverteilung in Roheisenentschwefelungsschlacken (AlzChem/LfM 2)

    Goriupp, J., 2011

    Research output: Book/ReportCommissioned reportTransferpeer-review

  421. Published

    Experimental methods to characterise new steel grades by means of thermal analysis

    Presoly, P., Pierer, R. & Bernhard, C., 2011.

    Research output: Contribution to conferencePosterResearchpeer-review

  422. Published

    Experimentelle Analyse des Verhaltens oxidischer Einschlüsse im System CaO-Al2O3-MgO

    Loder, D., 2011, Proc. of 18th International Student’s Day of Metallurgy. p. von-bis

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  423. Published

    Experimentelle Simulation des Zwei-Walzen-Gießverfahrens

    Arth, G., 2011, International Student's Day of Metallurgy 2011. p. 10-20

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  424. Published

    Extraktion als Werkzeug zur dreidimensionalen Einschlusscharakterisierung

    Lederhaas, B. & Michelic, S., 2011.

    Research output: Contribution to conferencePosterResearchpeer-review

  425. Published

    Grundlegende Untersuchungen zur Eisenverteilung in Roheisenentschwefelungsschlacken (AlzChem/LfM 1)

    Goriupp, J., 2011

    Research output: Book/ReportCommissioned reportTransferpeer-review

  426. Published

    Industrial fluidised bed direct reduction kinetics of hematite ore fines in H2 rich gases at elevated pressure

    Schenk, J., Weiss, B., Sturn, J., Voglsam, S. & Winter, F., 2011, In : Chemical engineering science : Génie chimique. 66, p. 703-708

    Research output: Contribution to journalArticleResearchpeer-review

  427. Published

    Influence of alloying additions on the morphology of non-metallic inclusions in high-strength steel welds: II-1776-11;II-C-421-11

    Vanovsek, W., Bernhard, C., Fiedler, M. & Posch, G., 2011

    Research output: Non-textual formWeb publication/siteTransfer

  428. Published

    Interactions of non-metallic inclusions with steel and slag: Thermodynamic modeling, experiments and metallographic analyses

    Michelic, S., Hartl, M. & Bernhard, C., 2011, EPD Congress 2011. p. 723-730

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  429. Published

    Investigating the influence of Ti and P on the clogging of ULC steels in the continuous casting process

    Bernhard, C., Xia, G., Karasangabo, A., Egger, M. & Pissenberger, A., 2011, 7th European Continuous Casting Conference. p. Paper -17

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  430. Published

    Investigation of the implications of the current conductive mold technology with respect to the internal and surface quality of ESR ingots

    Holzgruber, H., Scheriau, A., Knabl, M., Kubin, M., Korp, J. & Pierer, R., 2011, INTERNATIONAL SYMPOSIUM ON LIQUID METAL PROCESSING AND CASTING. p. 57-64

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  431. Published

    Measuring mechanical behavior of steel during solidification: Modeling the SSCC test

    Rowan, M., Thomas, B., Pierer, R. & Bernhard, C., 2011, In : Metallurgical and Materials Transactions B: Process Metallurgy and Materials Processing Science. 42, 4, p. 837-851

    Research output: Contribution to journalArticleResearchpeer-review

  432. Published
  433. Published

    Modification of non-metallic inclusions in the ESR process by steel-slag interaction: Thermodynamic and experimental considerations

    Michelic, S., Tanzer, R., Schützenhöfer, W. & Bernhard, C., 2011, Proceedings of the 2011 International Symposium on Liquid Metal Processing and Casting. p. 81-88

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  434. Published
  435. Published
  436. Published

    Pool Profile Formation and Homogeneity of Remelted Ingots using the Electroslag Current Conductive Mold Technology

    Kubin, M., Korp, J. & Pierer, R., 2011.

    Research output: Contribution to conferencePosterResearchpeer-review

  437. Published

    Recent status of fluidized bed technologies for producing iron input materials for steelmaking

    Schenk, J., 2011, In : Particuology. 9, 1, p. 14-23

    Research output: Contribution to journalArticleResearchpeer-review

  438. Published

    Reduction Technologies for the Recycling of Iron and Steel Residues

    Schenk, J., 2011, 3. Seminar Networking between Zinc and Steel. p. 63-76

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  439. Published

    Structural and morphological changes during reduction of hematite to magnetite and wustite in hydrogen rich reduction gases under fluidised bed conditions

    Schenk, J., Weiss, B., Sturn, J., Vogelsam, S., Strobl, S., Mali, H. & Winter, F., 2011, In : Ironmaking and steelmaking. 38, p. 65-73

    Research output: Contribution to journalArticleResearchpeer-review

  440. Published

    The formation of hot tear segregations in the continuous casting process

    Ilie, S., Reisinger, P., Bernhard, C. & Pierer, R., 2011, 3rd Chinese-German Metallurgy Seminar on Fundamentals of Iron and Steelmaking. p. Paper-10

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  441. Published

    Thermo-Mechanical Properties of an Fe–Mn–Si–Cr–Ni–VC Shape Memory Alloy with Low Transformation Temperature

    Leinenbach, C., Kramer, H., Bernhard, C. & Eifler, D., 2011, In : Advanced Engineering Materials.

    Research output: Contribution to journalArticleResearchpeer-review

  442. Published

    Thermodynamic and Experimental Study on the Modification of Nonmetallic Inclusions Through the Contact with CaO-Al2O3-MgO Slags

    Michelic, S., Bernhard, C. & Hartl, M., 2011, AIST Proceedings 2011. p. 617-626

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  443. Published

    Thermodynamic and Kinetic Modelling of the Devan adization Process in the Steelmaking Converter

    Lytvynyuk, Y., Schenk, J., Hiebler, M. & Mizelli, H., 2011, 6th European Oxygen Steelmaking Conference 2011 (EOSC 2011). p. 657-664

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  444. Published

    Thermodynamische Berechnung des Einflusses des FeOn Gehaltes auf die MgO-Löslichkeit von Pfannenschlacken.

    Goriupp, J., 2011.

    Research output: Contribution to conferencePosterResearchpeer-review

  445. Published
  446. Published
  447. Published

    Usage of FINEX® LRI (low reduced iron) in the blast furnace

    Thaler, C., Tappeiner, T., Schenk, J., Kepplinger, W., Plaul, J. F. & Schuster, S., 2011, 2nd International Conference and Exhibition on Clean Technologies in the Steel Industry. p. 1-12

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  448. Published

    Vergleich von Analyseverfahren zur Bestimmung von Eisenoxiden

    Gruber, C., Voller, N., Bäck, E. & Skorianz, M., 2011

    Research output: Book/ReportCommissioned reportTransferpeer-review

  449. 2010
  450. Published

    Cu-haltige HSLA Legierung

    Arth, G., 2 Dec 2010

    Research output: Patent

  451. Published

    Verfahren zur Herstellung von hochfestem, niedrig legiertem Stahl

    Arth, G., Bernhard, C., Eckerstorfer, G., Hohenbichler, G. & Linzer, B., 2 Dec 2010, Patent No. 10193403.2-2122

    Research output: Patent

  452. Published

    Verfahren und Vorrichtung zum Abtrennen von partikelförmigen Feststoffen von einem Gasstrom

    Schenk, J., Eder, T., Millner, R. & Rein, N., 15 Nov 2010, Patent No. A 1659/2008

    Research output: Patent

  453. Published

    Verfahren zur Herstellung von Agglomeraten

    Schenk, J., Böhm, C., Heckmann, H. & Stiasny, H. H., 15 Sep 2010, Patent No. A 1419/2008

    Research output: Patent

  454. Published

    Verfahren zur Steuerung eines Transformationsverfahrenes

    Schenk, J., Fischer, H., Mali, H., Schuster, S., Spuida, B. H., Wieder, K. & Winter, F., 15 May 2010, Patent No. A 921/2008

    Research output: Patent

  455. Published

    Prozessgas-Reinigungseinrichtung für eine Schmelzreduktionsanlage zur Gewinnung von Roheisen

    Schenk, J., Kang, S. M., Schmidt, M. & Wurm, J., 15 Mar 2010, Patent No. A 1026/2008

    Research output: Patent

  456. Published

    Verfahren und Vorrichtung zur Herstellung von Roheisen und flüssigen Stahlvorprodukten

    Schenk, J., Böhm, C. & Jan-Friedemann, P., 15 Mar 2010, Patent No. A 920/2008

    Research output: Patent

  457. Published

    ARVEDI ESP – REAL ENDLESS STRIP PRODUCTION: THE NEXT GENERATION OF PRODUCING HIGH-VALUE STEELS STARTED UP

    Bernhard, C., Bragin, S., Gelder, S., Linzer, B., Jungbauer, A., Venturini, R. & Guindani, A., 2010, ARVEDI ESP – REAL ENDLESS STRIP PRODUCTION: THE NEXT GENERATION OF PRODUCING HIGH-VALUE STEELS STARTED UP. p. ---

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  458. Published

    Automatisierte REM/EDX Partikelanalyse zur Bestimmung von nichtmetallischen Einschlüssen in Stahlproben - Ringversuch zur Vergleichbarkeit der Ergebnisse an unterschiedlichen Messsystemen

    Reischl, M., Martinez, C., Aigner, S., Lederhaas, B. & Michelic, S., 2010, Automatisierte REM/EDX Partikelanalyse zur Bestimmung von nichtmetallischen Einschlüssen in Stahlproben - Ringversuch zur Vergleichbarkeit der Ergebnisse an unterschiedlichen Messsystemen. Werkstoff-Informationsges., p. 365-370

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  459. Published

    Bestimmung des Eigenschaftsspektrums beschleunigt erstarrter Proben von HSLA Stählen

    Arth, G., 2010.

    Research output: Contribution to conferencePosterResearchpeer-review

  460. Published

    Bilanzmodell des FINEX®-Prozesses zur Abschätzung von CO2-Emissionen

    Thaler, C., Schenk, J. & Plaul, J. F., 2010, DepoTech 2010. p. 649-653

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  461. Published

    Bilanzmodell des FINEX®-Prozesses zur Abschätzung von CO2-Emissionen

    Thaler, C., Plaul, J. F. & Schenk, J., 2010.

    Research output: Contribution to conferencePosterResearchpeer-review

  462. Published

    Ca-Behandlung bei Si-freien Stahlgüten

    Ramaseder, D. R., 2010

    Research output: ThesisMaster's Thesis

  463. Published

    Characterisation of raw materials for use in the FINEX process

    Karasangabo, A., Skorianz, M. & Thaler, C., 2010

    Research output: Book/ReportCommissioned reportTransferpeer-review

  464. Published

    Charakterisierung der Erstarrungsstruktur von Stranggussbrammen

    Hadler, M., 2010

    Research output: ThesisMaster's Thesis

  465. Published
  466. Published
  467. Published
  468. Published

    EINFLUSS DER STRECKENENERGIE UND SCHWEISZGESCHWINDIGKEIT AUF DAS ERSTARRUNGSVERHALTEN VON HÖCHSTFESTEN MAG UND MAG-FD NÄHTEN

    Vanovsek, W., Strauss, C. & Bernhard, C., 2010, join-ex 2010: Zusatzwerkstoffe und Gase. p. 15-21

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  469. Published

    Einfluss der Konvertergeometrie auf die Metallurgie des LD Prozesses

    Ortner, M., 2010, 121 p.

    Research output: ThesisMaster's Thesis

  470. Published
  471. Published

    Experimental characterisation of new peritectic steel grades

    Presoly, P. & Pierer, R., 2010.

    Research output: Contribution to conferencePosterResearchpeer-review

  472. Published

    Experimental simulation of crack formation of steels in the temperature range of second ductility through

    Krajewski, P. & Pierer, R., 2010.

    Research output: Contribution to conferencePosterResearchpeer-review

  473. Published
  474. Published
  475. Published
  476. Published
  477. Published

    Kinetics and Control of Scaling for Reduced Surface Decarburization of Spring Steels

    Anghelina, D., Kienreich, R., Zamberger, S., Zamberger, J., Kozeschnik, E. & Schneider, R., 2010, In : Metalurgia international. XV, p. 5-8

    Research output: Contribution to journalArticleResearchpeer-review

  478. Published

    Kombinierter Einsatz analytischer und statistischer Methoden zur quantitativen und qualitativen Bestimmung des Reinheitsgrads von Stählen

    Michelic, S., Hartl, M., Wieser, G. & Bernhard, C., 2010, Kombinierter Einsatz analytischer und statistischer Methoden zur quantitativen und qualitativen Bestimmung des Reinheitsgrads von Stählen. Werkstoff-Informationsges., p. 359-364

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  479. Published
  480. Published
  481. Published

    Metallurgische Einflüsse auf die Umformbarkeit von Stählen

    Buchmayr, B. & Bernhard, C., 2010, XXIX. Verformungskundliches Kolloquium. p. 5-11

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  482. Published
  483. Published
  484. Published

    Polydimensional modelling of dendritic growth and microsegregation in multicomponent alloys

    Michelic, S., Thuswaldner, J. & Bernhard, C., 2010, In : Acta materialia. 58, p. 2738-2751

    Research output: Contribution to journalArticleResearchpeer-review

  485. Published

    Research and Engineering Work for Enhancement of Competitiveness of FINEX® Technology - Phase 1

    Thaler, C., 2010

    Research output: Book/ReportCommissioned reportTransferpeer-review

  486. Published

    Sekundärmetallurgische Aspekte der Herstellung hoch manganhaltiger Stähle

    Wiener, J., 2010, 193 p.

    Research output: ThesisDoctoral Thesis

  487. Published

    The Nature of Internal Defects in Continuously Cast Steel and their Impact on Final Product Quality

    Pierer, R. & Bernhard, C., 2010, AIST Proceedings 2010. p. 193-203

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  488. Published

    The Working Group "Continuous Casting: Metallurgy and Materials" (M²CC) at Leoben University

    Bernhard, C., Pierer, R. & Michelic, S., 2010, Proceedings of the AISTech 2010. p. 01-08

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  489. Published
  490. Published

    Über die Bildung von Heißrissseigerungen in Stahl: Vergleichende Untersuchungen an Stranggussbrammen und Laborversuchsproben

    Reiter, J., Pierer, R., Ilie, S., Presslinger, H., Fluch, J. & Bernhard, C., 2010, In : Berg- und hüttenmännische Monatshefte : BHM. p. 129-135

    Research output: Contribution to journalArticleResearchpeer-review

  491. 2009
  492. Published

    Obituary for Prof. Wilfried Krieger

    Schenk, J., Dec 2009, In : Steel research international. 80, 12, p. 866-866

    Research output: Contribution to journalArticleResearchpeer-review

  493. Published

    VERFAHREN UND VORRICHTUNG ZUR HERSTELLUNG VON GESCHMOLZENEM MATERIAL

    Schenk, J., Hauzenberger, F., Millner, R., Rein, N., Schmidt, M., Vuletic, B., Wieder, K. & Wurm, J., 29 Jul 2009, Patent No. 07818595.6

    Research output: Patent

  494. Published

    Evaluation of the Limiting Regime in Iron Ore Fines Reduction with H-2-Rich Gases in Fluidized Beds: Fe2O3 to Fe3O4

    Sturn, J., Voglsam, S., Weiss, B., Schenk, J. & Winter, F., Mar 2009, In : Chemical Engineering & Technology. 32, 3, p. 392-397

    Research output: Contribution to journalArticleResearchpeer-review

  495. Published

    Fluidized-bed technology for the production of iron products for steelmaking

    Plaul, F. J., Böhm, C. & Schenk, J. L., 1 Feb 2009, In : Journal of the Southern African Institute of Mining and Metallurgy. 109, 2, p. 121-128 8 p.

    Research output: Contribution to journalArticleResearchpeer-review

  496. Published

    AS2A Software - A new tool for Automatic Solidification Structure Analysis

    Griesser, S., O'Leary, P., Stangl, S. & Pierer, R., 2009.

    Research output: Contribution to conferencePosterResearchpeer-review

  497. Published

    Automatic Determination of Primary Grain Size using Dendrites Orientation in Metallurgical Micrographs

    Griesser, S., O'Leary, P. & Pierer, R., 2009, Quality Control by Artificial Vision. p. 1-2

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  498. Published

    Bestimmung der Fließeigenschaften von Schüttgütern

    Ellersdorfer, M. & Thaler, C., 2009, Tagungsband zum 5. Minisymposium Verfahrenstechnik an der TU Wien. p. 103-110

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  499. Published
  500. Published

    Characterisation of phase transformation and damage during the solidification of steel

    Presoly, P. & Pierer, R., 2009.

    Research output: Contribution to conferencePosterResearchpeer-review

  501. Published

    Charakterisierung Heißrissbildung

    Pierer, R., 2009.

    Research output: Contribution to conferencePosterResearchpeer-review

  502. Published
  503. Published
  504. Published

    Der Hochofen am Pyhrnbach in Liezen-im 19. Jahrhundert ein Versuchsaggregat für die Geologen

    Presslinger, H., 2009, In : Da schau her. p. 15-18

    Research output: Contribution to journalArticleResearchpeer-review

  505. Published
  506. Published
  507. Published

    Die Stranggießforschung am Lehrstuhl für Metallurgie: Entwicklung, Status und Ausblick

    Bernhard, C., 2009, In : Berg- und hüttenmännische Monatshefte : BHM. 154, p. 20-26

    Research output: Contribution to journalArticleResearchpeer-review

  508. Published

    Elektrolytische Extraktion von nichtmetallischen Einschlüssen

    Hartl, M., 2009.

    Research output: Contribution to conferencePosterResearchpeer-review

  509. Published

    Empirical reduction diagrams for reduction of iron ores with H2 and CO gas mixtures considering non-stoichiometries of oxide phases

    Schenk, J., Weiss, B., Sturn, J. & Winter, F., 2009, In : Ironmaking and steelmaking. 36, p. 212-216

    Research output: Contribution to journalArticleResearchpeer-review

  510. Published

    Erstarrung peritektischer Stähle

    Presoly, P., 2009.

    Research output: Contribution to conferencePosterResearchpeer-review

  511. Published

    Experimental Simulation of the Solidification of Steel at Higher Cooling Rate

    Linzer, B., Hohenbichler, G., Bragin, S., Arth, G. & Bernhard, C., 2009, 3rd International Conference on Simulation and Modelling of Metallurgical Processes in Steelmaking (Steelsim 2009). p. Paper -CC17

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  512. Published

    Experimental Simulation of the Solidification of Steel at Higher Cooling Rates

    Linzer, B., Hohenbichler, G., Bragin, S., Arth, G. & Bernhard, C., 2009, In : Berg- und hüttenmännische Monatshefte : BHM. 154, p. 498-503

    Research output: Contribution to journalArticleResearchpeer-review

Previous 1 2 Next