Separation of the Fine Fraction to Improve the SRF Quality - Possibilities and Effects

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Abstract

This article deals with the quality assurance and improvement of solid recovered fuels (SRF) used for substitution of fossil fuels (e.g. coal) in the cement industry. In order to be able to increase the degree of energy substitution, on the one hand the quality of the SRF has to be increased and on the other hand all possibilities of fuel feeding ports (main burner (SRF PREMIUM Quality), calciner (SRF MEDIUM Quality), etc.) of the ro-tary kiln must be used (Sarc, 2015). In this study, the sieving of a fine fraction after pre-shredding and after post-shredding in a two-stage SRF production process was investi-gated. The fractions resulting from the sieving were examined for their combustion pa-rameters. Extensive sampling and subsequent chemical-physical analysis of the sieve fractions revealed that sieving off the fine fraction leads to an improvement of the com-bustion characteristics of the SRF PREMIUM Quality, but that two heavy metals investi-gated accumulate slightly. The fine fraction (below 20 mm grain size) is very well suited for use in the calciner.

Details

Original languageEnglish
Title of host publicationWASTE-TO_RESOURCES 2019
Subtitle of host publicationVIII International Symposium MBT, MRF, and Recycling, Resources and Energy from Waste, Proceedings 14th - 16th May 2019
EditorsMatthias Kuehle-Weidemeier
Place of PublicationGöttingen
PublisherCuvillier
ChapterVII
Pages201-212
Edition1. Aufl.
ISBN (Electronic)978-3-7369-6009-1
ISBN (Print)978-3-7369-7009-0
Publication statusPublished - May 2019