Significance of an inclined plane test for mould slag assessment

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Organisational units

External Organisational units

  • K1-MET GmbH, Leoben

Abstract

The viscosity of mould slags is one key parameter in the continuous casting process of steel. Its measurement using a viscometer is costly and time and consuming. Therefore, beside viscosity modelling, an inclined plane test to determine viscosity was proposed by several authors. The task of this study was to find out, whether this method is suitable for quality control of mould slags, or not. Therefore, an inclined plane test device (IPT) was constructed and operated. At the same time, the slags were investigated by a viscometer. In total, 80 different slag compositions were investigated. Several options to represent the viscosity as a function of the ribbon length have been studied, and a suitable relation is proposed. It serves for detailed statistical studies to assess the error of IPT. While the relation between viscosity and length shows a satisfactory degree of determination (e.g.>0.97) in this study, this still does not ensure sufficient accuracy of individual applications of IPT. As the slag undergoes cooling during the test, also the viscosity change in dependence of the temperature contributes to the result, not only the viscosity of the initial impact temperature. This raises the unexplained variance of the result.

Details

Original languageEnglish
Title of host publicationProceedings of the 10th European Conference on Continuous Casting
Place of PublicationMailand
PublisherAssociazione Italiana di Metallurgia
ChapterMold Flux - Characterization
Number of pages9
ISBN (Electronic)ISBN 978-88-98990-24-5
Publication statusPublished - 20 Oct 2021
Event10th European Conference on Continuous Casting (ECCC 2021) - Bari, Italy
Duration: 20 Oct 202122 Oct 2021

Conference

Conference10th European Conference on Continuous Casting (ECCC 2021)
Country/TerritoryItaly
CityBari
Period20/10/2122/10/21