The Basics of Hydrogen Uptake in Iron and Steel

Research output: Contribution to journalArticleResearchpeer-review

Standard

The Basics of Hydrogen Uptake in Iron and Steel. / Truschner, Mathias; Trautmann, Anton; Mori, Gregor Karl.

In: Berg- und hüttenmännische Monatshefte : BHM, Vol. 166.2021, No. 9, 10.09.2021, p. 443-449.

Research output: Contribution to journalArticleResearchpeer-review

Bibtex - Download

@article{eef07f87f18b453d890b03788b3d7966,
title = "The Basics of Hydrogen Uptake in Iron and Steel",
abstract = "Armco iron and L80 steel (according to API 5CT) were charged under various conditions due to often not knowing the exact amount of hydrogen absorbed during operation and laboratory charging. These two materials were charged in sodium chloride (NaCl), sulfuric acid (H2SO4), both with and without addition of thiourea (CH4N2S), and in H2S (NACE TM0177) at open circuit potential.Additionally, cathodic charging was done in sodium chloride and sulfuric acid, both with thiourea added at a current density of 1 mA/cm2. The charging time was between 2 and 336 h for both methods. Prior to the charging, the specimens were cleaned in acetone and the bulk hydrogen content of the two materials was determined. After charging, the specimens were ground with a silicone carbide paper and the hydrogen content was measured with a thermal conductivity cell after hot extraction at 950 °C.Most of the immersion tests at open circuit potential resulted in hydrogen concentrations of up to 1 wt. ppm, while the cathodic charging led to values of up to 4 wt. ppm. In addition, the NACE TM0177 test provided the highest hydrogen concentrations and was the only test to show higher hydrogen concentrations for Armco iron than for L80 steel.",
author = "Mathias Truschner and Anton Trautmann and Mori, {Gregor Karl}",
year = "2021",
month = sep,
day = "10",
doi = "10.1007/s00501-021-01142-x",
language = "English",
volume = "166.2021",
pages = "443--449",
journal = "Berg- und h{\"u}ttenm{\"a}nnische Monatshefte : BHM",
issn = "0005-8912",
number = "9",

}

RIS (suitable for import to EndNote) - Download

TY - JOUR

T1 - The Basics of Hydrogen Uptake in Iron and Steel

AU - Truschner, Mathias

AU - Trautmann, Anton

AU - Mori, Gregor Karl

PY - 2021/9/10

Y1 - 2021/9/10

N2 - Armco iron and L80 steel (according to API 5CT) were charged under various conditions due to often not knowing the exact amount of hydrogen absorbed during operation and laboratory charging. These two materials were charged in sodium chloride (NaCl), sulfuric acid (H2SO4), both with and without addition of thiourea (CH4N2S), and in H2S (NACE TM0177) at open circuit potential.Additionally, cathodic charging was done in sodium chloride and sulfuric acid, both with thiourea added at a current density of 1 mA/cm2. The charging time was between 2 and 336 h for both methods. Prior to the charging, the specimens were cleaned in acetone and the bulk hydrogen content of the two materials was determined. After charging, the specimens were ground with a silicone carbide paper and the hydrogen content was measured with a thermal conductivity cell after hot extraction at 950 °C.Most of the immersion tests at open circuit potential resulted in hydrogen concentrations of up to 1 wt. ppm, while the cathodic charging led to values of up to 4 wt. ppm. In addition, the NACE TM0177 test provided the highest hydrogen concentrations and was the only test to show higher hydrogen concentrations for Armco iron than for L80 steel.

AB - Armco iron and L80 steel (according to API 5CT) were charged under various conditions due to often not knowing the exact amount of hydrogen absorbed during operation and laboratory charging. These two materials were charged in sodium chloride (NaCl), sulfuric acid (H2SO4), both with and without addition of thiourea (CH4N2S), and in H2S (NACE TM0177) at open circuit potential.Additionally, cathodic charging was done in sodium chloride and sulfuric acid, both with thiourea added at a current density of 1 mA/cm2. The charging time was between 2 and 336 h for both methods. Prior to the charging, the specimens were cleaned in acetone and the bulk hydrogen content of the two materials was determined. After charging, the specimens were ground with a silicone carbide paper and the hydrogen content was measured with a thermal conductivity cell after hot extraction at 950 °C.Most of the immersion tests at open circuit potential resulted in hydrogen concentrations of up to 1 wt. ppm, while the cathodic charging led to values of up to 4 wt. ppm. In addition, the NACE TM0177 test provided the highest hydrogen concentrations and was the only test to show higher hydrogen concentrations for Armco iron than for L80 steel.

U2 - 10.1007/s00501-021-01142-x

DO - 10.1007/s00501-021-01142-x

M3 - Article

VL - 166.2021

SP - 443

EP - 449

JO - Berg- und hüttenmännische Monatshefte : BHM

JF - Berg- und hüttenmännische Monatshefte : BHM

SN - 0005-8912

IS - 9

ER -